Axial UMG10 6x6 Upgrade Series - Rear Chassis Brace
HTML-код
- Опубликовано: 17 сен 2024
- Out of the box the UMG10 6x6 has some flaws. One of the flaws is having quite a big of chassis flex in the rear due to the chassis being a repurposed SCX10II chassis with chassis rail extensions. I've designed a 3D printed chassis brace to stiffen up that rear end and I install it in this video.
Seen in Video:
Axial SCX10II UMG10 6x6 RTR - bit.ly/3dW9Cpm (Amain Hobbies) | ebay.to/3dddRQC (eBay)
Kit:
Axial SCX10II UMG10 6x6 RTR - bit.ly/3dW9Cpm (Amain Hobbies) | ebay.to/3dddRQC (eBay)
Parts:
REVolutionX Rear chassis brace for UMG10 6x6 - www.thingivers...
REVolutionX Windshield Wiper Washers - www.thingivers...
REVolutionX Snorkel Brace - www.thingivers...
REVolutionX Bed Braces and Washers - www.thingivers...
Team Raffee Drive Shaft 85-114MM - bit.ly/2E0saJg
Team Raffee Drive Shaft 110-138MM - bit.ly/2Rsic6w
Team Raffee Drive Shaft 110-138MM - bit.ly/2FDN8Os
Pro-Line 1.9 BFG Krawlers G8 Compound - bit.ly/35VxKFK (Amain) | ebay.to/3pe9qrt
Crawler Innovations Deuces Wild CWR-3008 - bit.ly/3mzX7Wl (Amain) | ebay.to/2Z6lBfj
D1RC 1.9" Beadlock wheels - ebay.to/2No6ye3
SSD RC Brass Knuckles for SCX10II - ebay.to/3a9eZTz (eBay) | bit.ly/3pQlkIy (Amain)
Boom Racing Overdrive Gears for SCX10II - ebay.to/3tT66VU (eBay) | bit.ly/2XfUrld (Asiatees)
Electronics:
Hobbywing Quicrun 1080 ESC - ebay.to/2Z8RiVm | bit.ly/32hHYiF (Amain)
Turnigy GT5 Radio - ebay.to/2Z7FSRx
Turnigy FS-BS6 Receiver - ebay.to/3tS1C1O
Armory RC Katana 500 Servo -
Tools/Supplies:
Versachem Brake Caliper Grease - ebay.to/3p8bIZ7
Noleen SF3 Grease (available on eBay) - ebay.to/3jN9vB9
Permatex Anti Seize Lubricant (ebay) - ebay.to/3qpTbsN
Associated 1656 FT 1/4 in Driver Handle - ebay.to/3d31t5O | bit.ly/3gJVi56 (Amain)
Tamiya Side Cutter - ebay.to/371SAWb | bit.ly/3gHggSm (Amain)
DEWALT DCF610S2R 12V MAX Cordless Lithium-Ion 1/4 in. Hex Chuck Screwdriver Kit - ebay.to/3tQqXcr
MIP Metric Speed Tip Set MIP9512 - ebay.to/3qdBMTU | bit.ly/2Ch0wGB (Amain)
Bob Smith Industries Blue Thread Locker - ebay.to/3jDR8i9 | bit.ly/3283GHR (Amain)
ProTek RC Shock Pliers (available on eBay) - ebay.to/372Lscs | bit.ly/3iPs1Ie (Amain)
Duratrax Shock stand - ebay.to/2MOyJ6l | bit.ly/2W9Ihdq (Amain)
Hakko FX-888D Soldering Station - ebay.to/3aXFmLj
Multistar Rubber R/C Work mat - bit.ly/2T3F4Zo
IWISS Crimping Tool
- ebay.to/3jGKZll
Universal Servo Cable Wire Connector Crimp Pin Kit - ebay.to/3tSAAaW
E6000 Adhesive - ebay.to/2MZwtZV
UMG10 6x6 Conversion Parts:
Axial UMG10 4 Door Cab Pre-Cut (Clear) - bit.ly/3en0BWA
Axial UMG10 6x6 Bed Set (Clear) - bit.ly/2ARcRBd
Axial UMG 6x6 Frame Extension & Brace Set - bit.ly/2C1UHNE
Axial UMG 6x6 AR44 Axle Housing & Cover Set - bit.ly/32fuWnT
Axial WB8 V2 UMG 6x6 Driveshaft Set (Short) - bit.ly/32azmfp
Axial UMG 6x6 4x75mm Steel Links - bit.ly/32a488g
Axial UMG 6x6 4x84mm Steel Links - bit.ly/2WrAGHt
Axial AR44 Complete Locked Axle Set (Build Front or Rear) - bit.ly/32aJuF8
Axial 61-90mm Icon Aluminum Shock Set - bit.ly/2DpYh4n
Axial MT45 1.9" Rock Crawler Tires - bit.ly/3egz2OF
Axial MW19 1.9 Plastic Beadlock Wheels - bit.ly/3gT3jES
#AxialRacing #AxialUMG106x6 #AxialSCX10II #AxialSCX10II6x6 #Axial6x6 #AxialRacing6x6 #RCCrawler #RCTruck #rcscale
=================================================
Subscribe: www.youtube.co...
*Notice: Some of our articles, videos and descriptions may contain affiliate links, which means that if you click on one of the product links, RevolutionX may receive a small commission. This helps support the website and social media channels and allows RevolutionX to continue to produce content. Thank you for the support!
=================================================
Just picked up mine today! Can’t wait to get it out on the trails
Me too! I wanted to take care of some issues first though!
You've just convinced me to get the larger Print Bed!! Very clever and simple solution!! 👍👍
Carmine ✈🚂🚙
Thanks appreciate that man! Yeah I think sooner or later I'll get a printer with a larger bed. Right now I'll get by though!
It seems stiff enough anyway... I like it. Could you Epoxy a sheet of Styrene Sheet under the two halves. I mean if you think it's not stiff enough?
I know I'm going to be the LAST person on the planet to get a 3D Printer... I don't get my inheritance until next year.
But for more reasons than this, I want a bigger bed.
In your opinion - Do I also want a Resin Printer for small details???
@@CarminesRCTipsandTricksYeah, technically you can I guess.
Nice upgrade looks nice and strong
👍Yeah, I can't wait to get this rig out!
Looks good 👍
🙏Thanks!
Great design been wanting axial to fix that flex issue butt you did 😎👍
🙏It was a fun project! Still a lot of things that can be improved on this rig though!
Nice! I tigged my chassis rails together😎.
That's one way to do it!
Nice video video and upgrade
🙏 Thank you! 🤙
Nice! I need to get a printer lol this way I don’t have friends making me stuff 😂
It's all good! 👍
Is there an interior anywhere for the 6x6
Yes....there was. It's been discontinued unfortunately, but they had a really short run of them when they were available.
Aaaagh man i missed out I have my 6x6 revamped check it out when I post it thank bro 🙏🏻👍🏼🤙🏼💯🔥🔥🔥🔥🔥
Can we purchase these from you ? I don’t have a 3D printer . I would like a price and availability if this is something you would consider
Yes you can! I'll be setting up a shop soon, but I've just been sending invoices to those that want me to print for them. Just contact me at contact@revolutionx.com and I'll get you taken care of!
Mega like 👍👍👍
🙏 Thank you!
Is it still possible to get the rear brace?
I made it available on Thingiverse. If you have someone with a 3D printer, you can just download and print it.
Do you still print these? Can I place an order?
Yes, I do. Just shoot off an email to contact(at)revolutionx.com
One question, is it really bad (in heavy use and a true rock crawler) that the chassis flex so much? 😳
In this case the chassis flexes so much that it can cause issues with the drivetrain because of the way those rear axles are connected. For most rigs, it's about predictability of the way the chassis handles.
@@RevolutionX In a mental simulation😬, I thought flexing would help keep all wheels in contact with the ground ... Too much imagination 😬 ... Thanks for the clarification 👌
So how much will you sell me one of the new set of rear braces.?
Go ahead and shoot me an email at contact@revolutionx.com and I'll send over an invoice.
Need one of those BRACES too! THANKS for posting.Nice JOB, enjoyed the video.👍
@@JoseMunoz-gg2cn hit me up on e-mail. I'll send you over an invoice if you want one. Takes about a day to print.
@@RevolutionX ok, I will. THANKS a LOT
Whats your email? THANKS