FIRING UP THE TURBOJET!
HTML-код
- Опубликовано: 26 мар 2019
- We test our first turbojet engine with propane fuel and explain how we intend to use such engines to drive low speed high torque output turbo shafts.
Find us on Patreon - / techingredients 
Наука
It's a Stationary Fuel to Noise Converter!
I'd wish I had neighbors like you.
I'd rather hear turbine whine than bumping car stereos.
lol
me too lol
Every video I watch I say to myself - Man, I wish he was my neighbor!
I live in extremely rural Tn. All we hear out here is gunshots in the distance on occasion. I love it. The sound of freedom.
@@joshuagibson2520 South Georgia = Same, and I love it as well. I travel a lot with my job, often to major cities, and there's probably no one that could offer me enough money to move to any city (inside the city limits or "town"), even a medium or small one. My ole lady knows my requirements before she shows me any other home she'd like to look at; if I can't piss in my front yard without somebody seeing and/or freaking out, and most importantly, if I cant shoot my guns in my own back yard, then there's absolutely 0 chance I would spend a dime to buy that home. Just the way I am....plus people are nicer in the country, and usually much better looking women, in my opinion
This is what i have been waiting for all week
me to
And me
lol queef
Unless you're specifically recording ambient sounds, you guys should use the lav mic all the time. Sounds a lot better...
yep no insult but it did sound better
@James Smith Listen from 8:17 to 30 seconds later (8m47s), and judge for yourself. Be honest...
Not to be preaching to the choir really but YES! The production value went up by a lot. With a channel with this amount of technical knowledge it's a shame to lose viewers due to bad audio. The kind of people enjoying this kind of content is either not bothered at all or never coming back due to the way it's presented. I feel I'm a special case that is so interested I can stand quite bad production value but I for sure will recommend channels going for that extra mile to other's.
On topic, I like seeing the progress of this particular project.
@James Smith Nice "honesty", loser. Fuck off.
+
Used a small turbo because "the smaller the turbocharger, the more difficult it is to get it to operate". This guy doesn't mess around. Great work, and thank you for explaining everything so well. Love your attention to detail, this is an awesome project. Would be cool to see how much energy you can extract from both the pressure + heat of the exhaust, maybe drive a steam generator for cabin heat or wing de-icing in whatever vehicle your jet engine goes into!
You are an extraordinary man. So meticulous, so precise, clearly enjoying these technical builds and sharing information. Very, very cool!
lapel mic sounded best. you should use that exclusively moving forward.
You need a compressor bypass to unload the turbine (you'll get higher rpm's and better pressure ratios, by keeping the compressor out of surge) and a better flame holder to help stabilize combustion (you can hear it chattering, and see the boost pressure bouncing all over)
Your idea for thrust measurement is questionable, at best. The exhaust jet will entrain a not insignificant amount of air into the stream before making the bend, and the wall friction of the flow will come into play, so you will not be getting accurate measurement of thrust available. It will, however, be repeatable, so if you're only looking for verification of tuning changes, then it'll work fine.
I think that most of his combustion problems arrive from compressor surge
I had similar problems and I added a compressor outlet bleed valve so it doesn't surge on low rpm
He said he wants to use this to turn a turbine ... that tells me that its better to include the "bypass" air effect into the measurement.
@@MrRolnicek he could make respool system but cutting into turbine housing is no easy task
@@MrRolnicek If you're driving a power turbine, then you will need even MORE compressor bypass, to further unload the turbine. The extra backpressure of the power turbine is robbing the gas generator turbine of useful pressure difference, and that means there's less power to drive the compressor, which is already overloading the gas generator turbine.
Could be that tapering outlet is too long or too small in diameter causing the surge.
I've been waiting on this since the last week where I binge watched your channel. Very satisfying to see the turbo finally run! The idea to use a fuel pump for the oil is actually genius.
The neighbors must love you guys. Keep up the great content!
Love your work!! That part about waking up the wife was priceless.
I'm really glad you enjoyed doing this sort of thing because I definitely enjoyed watching the videos. such high-quality work, I'm all ready for the next one. :)
I loved the thinly veiled sarcasm towards neighbours, but especially the misses. There was even a wry smile when you said about the misses. Very impressed with the turbojet too.
those thumbnails get me everytime. :D great work!
Definitely the right weather for max-power pulls!
Thank you for explaining the point behind this, I was scratching my head for a while!
Great job guys! This is awesome! And so small!!! Really really really looking forward to your, as always, excellent optimisations!
Really like your channel! This is how science classes at school should be !
Thanks!
Amazing Video as always. Now i have to build one too.
facebook.com/diygt/
This is seriously so awesome, thank you for taking the time to build it and record it all to share!
You're welcome!
Youre channel is so under appreciated. You've got great content
Thank you!
I wish you were my shop teacher back in high school!
*Tech Ingredients* YOU are a modern day and interesting "Mr Wizard"
Looking forward to your video on Pulsed Detonation Engines (PDE) as I still have yet to see a homebuilt version that generates sustained thrust or runs at over 10hz continuously.
I've been working on a PDE for 6 years. Hope I get to prototype soon. Need $$
I wonder if a pulsejet might be the way to win those car audio volume competitions.
@@NiHaoMike64 I devised a 36" subwoofer that utilizes a crankshaft and adjustable throw connecting rod to recreate any range of base and frequency, with 10" of travel on the speaker possible.
@@ProlificInvention That's cool. I can feel the low vibrations just reading your comment.
@@shadowedmoonchannel Sounds very interesting, I love inventions, prototypes, and inventor type people! Here is a video I made about PDE ect...figured you might like it...
ruclips.net/video/Hixe40eWo2U/видео.html
Beautiful workmanship and presentation. Cheers, Mark * * *
Very good demonstration. Thank you
It's surging horribly
You need to add a compresson bleed valve on the compressor outlet to reduce surge on low compressor rpm
You didn’t say please so don’t expect him to listen to you
@@mrd9534 Ur mom gay lol
Do you think it was surging because it was not up to running temperature? It didn't run very long for the temperature to stabilize.
could you explain that a bit more? you sound very experienced with that kind of problem. all I could think was "it sometimes sounds a bit unstable"
@@rickdees251 does surging is related to temperature? Until what I'd understood, comp. surge occurs when the exhaust air couldn't expand correctly (such as a sudden blockage or the exhaust nozzle too small). Clarify me please.
My favorite channel on youtube! Wish I could have watched this quality of Edutainment on PBS as a kid! @Techingredients Which Defense contractor did you work for in one of your past lives?
Maybe he can do a show.
Nice to see someone in my age group having fun!
Keep on having fun.
Well done guys! Just fantastic stuff as usual!
Neat-o ! Was the oil temp gauge working or it just didn't run long enough to even be within its range ? Can't wait for future vids this is cool af.
"cooking the operator"
Ah... that's a good one 👍😂
Great job, there, im happy you are going for generator with jet, looking forward for performance results, especially compared to previous drone generator build.
This is great! I can't wait to see what's next!
Holy compressor surge Batman!!!
when you wake up your wife with your propane hair dryer
just tell her your making the worlds fastest hair dryer, also generator, also neighbor waker! 3 in 1 deal
@@UPsideDOWNworld321 If she doesn't appreciate it, find a new wife.
It seems like he's becoming more confident, which is great! Good on you, mate!
One of the best channels on youtube. I'm really enjoying all of the videos you guys are making. Thank you. The video production is good and the subject matter is interesting.
Thanks!
I'm definitely looking forward to any kind of attempt at improving fuel efficiency!
Ha ha that was a joke right?
Tech Ingredients: You are a true "at home" Mechanical Engineer. Carry on good sir! ;- )
Is he really a mechanical engineer?
@@mandernachluca3774 he supplies all of Wile E. Coyote's equipment.
Aaaand I see a pulsejet on the background!!! This channel is getting better by the day!
This channel is fantastic. Thank you for the consistently high quality content.
Thanks!
Have you thought about increasing thrust or efficiency using a liquid hydrogen precooler or MW 50 injection? Would be an interesting idea for a later video :)
I think those large pops while the engine was running were the engine surging, looks like you have the exhaust nozzle too choked.
Looking at the glowing part of the turbine side of the snail I'd say you have either incomplete combustion or the secondary holes of the combustion chamber either need opening up or create a few more of them.
great work.
Paul
Aww nice profile pic.
@@teresashinkansen9402 thank you. legend has it that an ArcturanMegadonKey could talk the hinds legs off a....well I'm sure you know the rest
@@ArcturanMegadonkey Sorry I didn't knew the reference but I looked it up, interesting. I like donkeys they are so cute so I thought he/she could be yours.
@@teresashinkansen9402 have you never heard of 'The Hitchhikers Guide To The Galaxy' ?
do some searching, read the book, listen to the radio series. it was brilliant!
I too am confused as to why he thought restricting the turbine outlet nozzle greatly would be a good idea to do before the test run. Really bad for gas flow through the turbine IMO, especially with such a small setup that has little room to accommodate the excess air such the compressor is generating.
Yes! I have been waiting for the test!
Loved it ,loved it. Waiting for more videos.
I subscribed just for the annoying neighbours and waking wives part. Oh and the awesome tech and explaining.
500F temp drop in a few seconds at the EGT sensor seems harsh.
I really have a lot of fun watching you have fun thank you sir for making another wonderful film
Outstanding! I look forward to seeing how you attached the hardware that converts the high pressure exhaust into rotational energy.
Looking forward to performance numbers for it.
You'll see them personally when the earth starts to rotate the other way (or they blow the moon away)
@@aatuvaan7563 great answer to those "how much HP" and "does it fit my honda" type comments ;)
@@stolpesouthstories With that turbine there would probably be mostly increased noise in "the honda". ...and that would suit well for some fast and furious honda boys :)
Power plant for a drone generator in the works maybe?
The wait is finally over😍
awesome work...
Highlight of my week right here! Been waiting for this!
Bill Nye the so called, " Science Guy." isn't qualified to be this guy's camera man.
Don't ask me how it works, I was in the Aerospace industry for over 20 yrs. I just build the stuff.
Well I do have a degree in Mechanical Engineering and was a CNC Machine Shop Manager for several years. I like working in the Machine Shop better than the Engineering Department, but the two work hand in hand.
This channel brings back memories of all the prototyping I use to do. I hope it inspires younger kids to get into working with their hands and minds.
I need to do a retraction here. Bill Nye was a Mechanical Engineer who worked for Boeing and invented a hydraulic resonance suppressor tube used on 747. He worked there from 77-86 then got into comedy , TV and wrote a couple Best Selling books.
So he is a very smart guy who dumb's himself down and acting geeky is his shtick .
@@gooblio His radicalized left rhetoric has ruined him for me. I still respect his contributions to science, and getting kids into science. But his new show just seems like indoctrination.
Neighbors must love this😂
They love it to bits.
I was waiting for the test video.....!!!!!! Thanks for the upload..... :)
Wow what a fantastic video. Lots of great content to be found on this channel. Keep up the good work!
Thanks!
Don't give up on that Camry. It's still good!
It is planned that they will keep testing until the thrust melts the ice, and vòila that is a reason for doing things like that midnight.
Garage might be more practical but would end up burnt down... :D
The Camry is the most unreliable/self combusting thing in that household. :DDDDD
@@woldemunster9244 The accent in "voilà" is on the 'a', and in general should be followed by an exclamation point, as it is an exclamation.
You are tackling all very interesting projects. Hybrid drone, hybrid gas turbine and now the turbo charger jet engine. But whatever hapened to the earlier two projects? Have you concluded them?
Practically none of our projects are really concluded. We are building a very unusual dye laser. It's just that each project leads to several others. It's fractal or a little ADHD.
We tried to do turbo charger jet engine as a term project in my gas turbine course, but could not make it to run. In my final year I proposed hybrid jet engine using an rc nitro engine for compressor but my proposal was rejected because of lack of enough calculation and research involved. I still think it would have made a great capstone project.
That's a awesome! Congrats, Really like your channel!
AGE OF THE GEEK BABY , AGE OF THE GEEK !! 😁
Thanks for sharing and take care. 👍
I would like to see you build a turbo shaft engine.
He's has a life doing what pleases him, which is this project right now or perhaps you can find someone else on YT who has. Cheers
@@rickdees251 If you want to go back and find every single comment I have left, you'll see that I support everything, 'he,' has done. However, you seem to be very simple minded because you haven't realized that, 'he,' is not the only person creating videos. He has his son, the original creator of, 'Tech Ingredients,' in videos. His son started the name, selling computer components online and the name stuck to create this RUclips channel. Saying I would like to see him make a turbo shaft engine also means you did not watch the entire video because towards the end of the video, he spoke about using the turbine to drive a generator, which would be a turbo shaft engine. Instead of trying to act like an asshole, maybe you should watch all of the videos and realize just what this creator has planned.
rick dees my aren’t you a triggered little bitch
Will there be a continuation of the peltier fridge series?
Wasn't that completed and shown working in his follow up video? Once a project is done what else is there to cover? cheers
@@rickdees251 as said at the end of this video ruclips.net/video/cw8ipUYodkE/видео.html "we will show this trick to increase the efficiency in the next video"
I just want to binge watch your jet engine videos. But you've just started! I'll be subbing!
Superb!
Thanks to All who helped make this possible.
Namaste
"kloodge"
Я человек простой, вижу трд вспоминаю Игоря
Рости ему еще до Игоря
impressing as always
I have been waiting for it
Your the coolest alien that picks my mind and makes what I dream about making
Tech Ingredients, what was your job before RUclips?
i would have to guess teacher ,, he just seems to be that type of person
DARPA?
How would you describe the facial expression in the thumbnail. Focusiety, Anxtention perhaps?
_"THEREVIEWSONAMAZONSPECIFICALLYSAIDTHISWOULDN'TMELTMYFACEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE"_
great videos. keep them coming
This video was nicely done
GUYS........ Please do not use thinner oil than recommended by turbo manufacture..... there are plenty of oil pumps he could of used, but we have used 044 Bosch fuel pumps for oil, and at the spec of oil recommended by turbo manufactures..... The reason you don't see many working compact twin set ups, is the discharge temp of the air from the first stage can be over 200 C, hitting an ali comp wheel, that don't like temps much more than that, the comp wheel fails
ohhhh how i've waited for this...thanks alot guys!!!!!!!!!!
Absolutely awesome video. A lot of useful information. Thanks a lot sharing this.
01:45 "...it doesn't require you to kluge together some type of engine-driven pump..."
Old school engineer/hacker confirmed. Good stuff. :)
you are brilliant!! everything you do every video I have watched I've been interested all way to the very end not saying a lot because your videos work fairly long and for me to watch the whole thing is pretty amazing thank you teaching me your amazing knowledge
cool stuff, great idea for power generator. cant wait to see some of your various model prototypes
Great video again !!!👍👍👍
Always great content 😊
Excellent Work, Bravo!
Maybe the best and most reliable turbojet convertion on RUclips. Congrats
Version 2.0 tonight!
Great job, looking forward to the next video’s
WAIT NO LONGER!!!! WOOOOO TECH INGREDIENTS DOES IT AGAIN! Thanks guys!
top notch as always!
super cool!! thanks for sharing
So cool, I want micro gas turbine range extender / generators! Love this tech
Great stuff!
Thanks for such an interesting build.
Sure!
this looks absolutely amazing. I am looking forward to to the generator!
Impressive project
Thanks for sharing😀👍
Really fantastic !
Awesome :) Have 1 suggestion remove the air bubbles from the oil and water pipes will help them function more efficiently and stop any heat issues as you go bigger. Cheers and keep up the great things you do.
Love the idea
Goosebumps engaged.
Love it, love it. Most satisfying and hope the neighbors remain kind. :)
Can't wait to see what else you are doing
Thank you for that engineering
Brilliant and thank you.
Nice job man
WOW! fantastic stuff you guys …..more please!
You got it!