How to Pair MyAir Version 10 Wall Sensors 👉 (Quick & Easy Guide!) 🧐

🤷‍♂️ Having trouble pairing your new My Air Version 10 wall sensors? Here's the process step-by-step, from setting up your zones and sensors to pushing the pair sensor button. We'll also cover what's new with Version 10 and how it's different from previous models. So ditch the frustration and get your smart home system working seamlessly!
Please note: These components are not interchangeable with previous models (CB9 and earlier).
Here's what you'll need:
🔷 My Air version 10 wall sensor
🔷 New version 10 CB10 control box
🔷 TSP 8-12 touch panel
🔷 New power supply
Here's how to pair your sensors:
1️⃣ Go to the setup page on your touch panel.
2️⃣ Select "Zones and Sensors."
3️⃣ Choose the zone you want to pair the sensor with. (Make sure you've already named the sensor!)
4️⃣ Tap on the bar across from the zone name and delete it.
5️⃣ Enter the desired zone name (e.g., "Bedroom 4") and save it.
6️⃣ Go back to the "Zones and Sensors" menu.
7️⃣ Push the "Pair Sensor" button on the touch panel.
8️⃣ Remove the cardboard from the battery holder on the wall sensor.
9️⃣ Push and hold the "Pair Sensor" button on the wall sensor until the lights start flashing.
🔟 Hold the button until the pairing process is complete.
⏸️ Repeat steps 6-10 for each additional sensor you want to pair.
💁🏼 Tip: The pairing process may take a little longer than with previous versions of My Air. Be patient, and hold the button until the screen changes.
Check out these links to ask us anything and learn more about us!
Call us at: 1300 966 464
• Book a service at: bit.ly/3LsETUC
• Website: airconsolutions.com.au
• Facebook: bit.ly/3Lp7CtC
• Instagram: bit.ly/3t8tuCU
• RUclips: bit.ly/46dRIdq
• Online store: bit.ly/48x9k66
• eBay: bit.ly/45YJBBE
#Airconsolution #HVACAustralia #HVACexperts #Australia Melbourne #Geelong #MyAir #version10 #CB10 #TSP812 #touchpanels #wallsensors #pairing #guide #howto #smarthome #automation #techtips #MyAirVersion10 #CB10 #TSP812 #WallSensorPairing
#SmartHome #DIY