Bricklayer and his improver building a single garage
HTML-код
- Опубликовано: 28 янв 2024
- #bricklayer #garageconstruction #masterfulcraftsmanship #buildingwork #homeimprovement #constructionindustry #constructionproject #bricks #constructionwork #constructionskills #stunninggarage #garagebuild #brickwork #brickworkdesign #buildingdesign #homebuilding #garagedesign #buildingconstruction #buildingskills #constructionjobs
- Хобби
What do you think of the red bricks?
1s next door better looking but seen and use a lot worse
台灣蓋房子希望能跟你們依樣蓋房子方式能安全能快速可惜台灣房子營造工程建築建造不像你們國外這樣
看你的影片好療育又歡樂
可惜台灣沒有台灣蓋房子工程只講求快又不安全
台灣營造房子土木營造建築行業大缺人都斷層
台灣蓋房子都累得腰酸背痛
Hello I am Asian Taiwanese
The first time I followed you YT video was released early and it’s great
I hope that when building a house in Taiwan, I can build a house in the same way as you do. It can be safe and fast. Unfortunately, Taiwan’s house construction engineering and construction are not like your overseas ones.
Watching your videos is so therapeutic and joyful
It's a pity that Taiwan doesn't have housing construction projects in Taiwan. They only focus on speed and safety.
Taiwan's house construction and civil engineering construction industry is in desperate need of people.
Building a house in Taiwan is so tiring that my back aches
Hi charlie i love workn with them type of bricks only here in ireland we use mostly concrete ones 😢😢 crap winter brick and harder clay bricks like red rustic . the ones you workn with are softer and not as uniform but you can still make em look good my man 👌👌👌 ricky the bricky
Atherstone reds they look like, horrible in the summer suck the life out of the muck
Prefer the buff colour ones the red ones look too common👍👍
I worked on a new house building scheme in 1968. And it was a well organised and run site with lots of supervision.
The bricks used to arrive on site by lorry direct from the brickworks in loads of either 5,10 or 20 thousand bricks per load. The bricks would be stored in"brick-sheds" located at strategic points around the site. These sheds had a raised floor, and the housing was constructed of scaffolding with a corrugated iron roof and tarpaulin on the sides, this kept the bricks dry and out of the mud and water, and also allowed for cross ventilation. The bricks could then be transferred from these "storage sheds" to the work areas by the BL`s labourers.
Timber was stored in a similar fashion to keep it dry and ventilated.
Oh how times have changed.
😁👍👍
And cement sheds with doors either end.
@@bricklayersworldwithandy6277
Yes Mate, and in one hundred weight bags, (1cwt) no wonder our backs are shot......
😁👍👍
@@martin2466Couldnt agree more, and when we were dumb apprentices we used to try n carry 2 of the things! No wonder we get back probs!
@@kevinscollan8293
Yes Mate exactly right.
I have a chiropractor on speed dial nowadays.
😁👍👍
PS = Retirement is great - isn't it? I hope you are keeping well.?
All the best to you. 👍👍👍
i’m in college doing my first year of brickwork and i do love it but watching you and your skills have made me fall into a great passion for the trade. Me and my mate come home from college and watch all your videos to get better, keep up the great work you inspire more people than ya think ❤️
@bdrick106
I would just like to wish you every success in your brickwork training. I remember my first year of my 5 year apprenticeship and I was just as keen as you are now.......
Learn everything you can, soak in all the knowledge (from whatever source) and work hard and I guarantee you will be successful.
All the very best to you & stay safe.
😁👉👍👍👍👍
Love that keep it up
The time it takes to be a good brickie ya may as well learn to be a solicitor
@@tungstentuktuk24 It can take 6 years to qualify as a Solicitor, from Law degree to obtaining your Practicing certificate.
Of course the rewards are good but the long hours and stress really suck.....!!!
Its "Horses for Courses," do what your happiest at.
@martin2466 do you think you learn how to be a good brickie by just doing ya 2/3 years as an apprentice? It's 5/6 years at least before ya up there. It's nice not really having a gaffer though,and ya rain days lol
I love watching how all this preparation makes the entire thing just more smooth and efficient.
Fascinating. I love watching skilled workers. Thanks.
Efficiency level 100, can't knock it 👏
Beautiful work i can watch this for hours 💯👍👍👍😃
Charlie the most organized I've ever seen fair plays 👍
Thanks for the long Video Charlie 👍👍👍
Great work Charlie, what trowel you using nowadays
Enjoyable video Charlie . Have you still got those Faithfull mortar boards you used in one of your first videos.
Bro makes this job look so easy, I know it’s not, but just goes to show how good you really are Charlie.
Top class lads free flowing bricklaying 👍
Charlie you're a top bricky 👍🏼 Have you tried a mortar rake on an angle grinder for getting the profile holes out? They're good bits of kit and if the joints arent too hard it zips through them
Oh, and I love how you rub up after brushing. Total attention to detail
Great job as always!!!
I was a hoddy for a 6 & 1.
I couldn’t keep up sometimes (on a straight run) and one of the trowels had to drop off the line to help me with loading out. Wasn’t unusual to shovel easily 5-7 ton into the mixer in a day.
I could almost nosh the exhaust of a manitou when we had one to chuck a bath up.
I was that fucked in the transit that I felt sick and the fellas used to give me a kick at my stop home. I miss those days. Rows, fights, arguments and weekly hassles.
My time as a nipper saw me sat in a muck tub in the back of a transit. It was fucking grim. Wet and cold in the winter and hot and dusty in the summer. The wankers used to squirt ketchup and mayo through the holes of panel divider from the front.
They used to wind me up like fuck because I worked faster when I was raging!
It sounds like Hell, but they were the best times of my working life so far!
I like to keep a rosebud propane torch on site for just that situation with the wet units. Works wonders. Cheers!
Blake's Thank you 👍😊
I saw the vid on the tube this morn littlun on the way congrats to u both all the best keep us posted re master trowel 2024 tkts 🍻
very informative videos, cheers pal
Hi Charlie , great video , what is the model of the laser level you are using ?
Great work Charlie
Nice work Charlie as always m8 🏴
Good morning don't miss the cold weather but miss laying bricks 😊great video 📹 now here in the Philippines weather too hot 😂now of too the beach ⛱️ never coming back to the cold 🥶 weather 😂thanks again for your video 👍 ❤keeps the good work up see on the next one 😊
@patrickobrien5367
Sounds an absolute idyllic lifestyle you have there.........
Happy days.
👍
I remember when those boards were brand new, you were as proud as punch, time fly's so quick.
I always end up on strange off intention channel/videos - Literally no idea what i'm doing watching brickie videos but its pretty cool stuff man - I had no idea, on the level of thought, effort and skill needed. Nice one
Nice work
Very skillfull job with profiles
Where did you get your laser level from what model dewalt is it.regards Steve liddell.
Clamp the gauge rod with a Fitzbrick 👍
Brilliant how its done.
I can't remember a hoddy
with a bucket at all, apart from at the mixer, muck used to travel in a plasterers hod, bricks in a brick hod. Looks like you've done that before !
so organised, so much prep
I am waiting for full video 👍👍👍☺️
Where did u get yer sweeping brush?
what is the distance from the house to the garage?
Does health and safety allow you on site when it's pitch black in the morning ?
Hows old mate Jordan going, i still go back and watch that video of you tearing down his garage pier from time to time
not badmate seen him on a night out a few months ago
Agreed 💯 on the Blake's
very little idea what is going on - but I appreciate the candour/honesty - obviously proud of your work as no corners cut - keep going my son! ;)
Good work charlie
Single garage, 1 proficient bricklayer + 1 experienced hod carrier who joints up...dpc to scaffold = 8 hours (no profiles...1990's style😉)....8 oclock starts NO DARK
I had an 6 month improver on the line 😊
What radio is that jockey ?
My house is those red bricks and i despise them but it gives us shelter so im grateful for that
When mixing wet and dry bricks....do full course dry, full course wet, not random mixed
...you will find all the beds are dry after pointing with no brush marks
Top a tale it take the fat off and give it a tickle be bloody lovely. Different brushes for different strokes of wetness and Bricky I find .
what size garage?
You are good mason ,l am also a mason today i laid blok 105 .From Rassia🖐
100% right when you talk about laying wet bricks, no matter how good you are , you just cant lay them , they swim, smudge, sink, and in the end your work gets pulled for looking shite a few days later, just not worth the risk
great watch - i have one just the same - cheap and classic casio
those hods are class. never seen ones like those
How much he make for this day?
What level is that plsa
What laser level is that ?
Synchronized mortar laying, last course first lift, like swan lake 😅😅😅 should have had the music ❤
Never thought I'd see a bricky with festool
Those Ramsey’s are talented bunch. No doubt he can make a cheeky Beef Wellington at home.
😊😊😊😊😊😊
Gauging tape?
7:20 with a hammer drill… what site is that!
Wat brand was that drill?
Think it’s a Festool drill
Good man
Multi red lovely
👍
Hi how much salary do you recevie
I used those profile back in 84 in Bishops Stortford, In not too fond of them but each to his own!😎👍
A tend to use the thickest
marshalltown jointer on them bricks,doesn't dig in as much and makes up the joint as the tend to be a lot of different thickness in the brick👍
I think 🤔 I am ready for work
First time seeing a bricky use festool gear
Do you not sponge your walls rather than brush? Better when they are wet and i think you get a better finish anyway
I have done in the past. I get bored of buying them
@@CharlieCollison yeah they do wear down quicker lol, we had the same thing last week, got a pack put on the loading bay, cut the plastic off and told driver take them bacck off, lookes like he had got them out of a pond!!
@@Barker-ws5kn it’s a pain in the arse 😂
Get the upholstery foam offline mate. They last 5 times longer than car sponges
AI they have got robots to lay bricks now all human bricklayers defunct soon
Couldnt you ask them to deliver dry bricks only, specifically stating you will refuse accepting any wet ones. They might be able to put a note on your order, i dunno
When they delivered they were dry ones, just didnt store em properly on site (first ones they were loading out at least)
They look ok Charlie
I would still say the red ones
Enjoy this video
Nice job, you can put em down.
That’s weight clean the bucket out right next to the nice soft red bricks
Steven Gerrard wants his forehead and hairline back lad.
Absolutely superb work ❤
Would ran all sides in 1 go more so with damp bricks all dry similar rates beds and joints for point bar last few. Guessing you may have done that if had another body supply the muck to you and Tom. Just saves when last wall wacked at end pointing them becomes an issue. Smashed as per buddy. A don’t see nobody taking your crown at the super trowel. Ul smash it again a full expect another don’t fuck it Charlie boy 😎😎🤙
Guarantee you’ll never be named on that Welsh guys snagging videos
I lay 1000 blocks per day and finish at 4 £1-50 per block lego
good stuff
Are you thinking about getting another hod carrier so you and tom can just lay all day?
I would love one… that turns up
Right
Not only a great brickie a great human being love ya son 😊😊😊im gona give your hairdressers a bash 😂😂😂
Yeah
The age old saying only a fool uses a dirty tool
ripping the improver of again
Get the old Charles Bentley onit son
Where is the hod what are these new brick carrying instruments
Clamps and they’ve been about for ages. A German invention. I preferred just slinging 12 on my shoulder. Too Gucci for our gang!
Charlie the magician. Top off your league. From old Irish brickie
I’d give up if I had to work on sites my advice to anyone is to get off them asap
The problem is that nobody gives a sxxt these days and and the poor old end user this time is the brickie has got to put up with it. Just because someone can’t be bothered to tarp up the bricks and not dump them on the mud.
You young lads you may think this is crazy but what ever you do do not let this government conscript you there talking about young men being conscripted to military service watch out because they’ll doit by force just tell them to jog on they need fighters Ukraine don’t let them get you and parents don’t allow your children to be conscripted
Them bricks always look terrible mate, just done an exstension in them to match existing brickwork,
The only thing is, you’ll put yourself out of some site work because you’re RIGHTFULLY fussy about your finishing and unfortunately, it seems, many SA’s don’t give a flying F apart from signing off absolute shite.
That's Smart as F##k that level thing 👌
My Blakes profile pissed me off after several mouths , by the time i had sorted them out i would have had a coin built , and it was marginal price wise , so just dumped them . Build a corner in 30 mins . so not worth the effort