I'm somewhat surprised that you said it matched the rated output. The maximum speed for a wind turbine is reckoned to be somewhere around 600 RPM, yet you had the generator running at 2000 RPM and it didn't blow the 40W lamp? It looks like in a real world application the generator would struggle to produce maybe 40W. I do acknowledge though that the bell wire sized extension wires that you used for both the three phase and DC to the lamp too would cause a fair voltage drop at the current draw of a few amps, and thus reduced power at the lamp...
It is the same as car alternator - 12 poles and possibly 36 slots - not much, car starts to charge from 700 rpm. For low rpm you have to have more poles. I am building with hub motor stator, it has 27 slots for 30 magnets, coils alternate direction with 3+3+3 slots per 10 magnets, I think it must work better fot low rpm
You can't "blow" the 40W lamp :D the generator won't push more current than the voltage and combined resistance define. If you spin faster the voltage goas up and the current drops. The only way to "blow" your lamp is if the peak voltage exceeds the rated voltage of the lamp for a substantial amount of time.
Great video, Im glad I ran across your channel. Finally someone who actually knows what they are doing! I saw some poorly connected wind turbine videos saying the product was poor. Education obviously helps. Lol My favorite was the testing on the roof of a car ( I just purchased the same model) there was about ten feet of romex, probably 14-3 coiled up in the seat connected to the meter and battery. Hmm I wonder why the output sucked? Lol. The turbine I have says 600w but looks identical to the one you just showed. ( I took mine apart too ) even the same off red wires. Look forward to exploring your channel ! Thanks!
Did you ever find a way to get tension at the axle with two discs connected at the rim? Its been a while since I have explored this topic and I don't think I'd be able to find it just by browsing your videos.
Very interesting, it’s weird that the Chinese don’t provide some videos with some depth to them about their products? Usually on RUclips there about 8 to 15 seconds. Appreciate your review!
hello, nice video , thank u so much , but i have one comment plz, u was saying in the title that the rectifier transform Ac to 12v Dc , but thats not what happened, in the video the rectifier transform voltage to 30v Dc and 60 v Dc later on, so to be carefull,this output Dc should not be connected to batteries ..thank u
www.amazon.com/Three-Phase-alternator-Permanent-Generator-Alternator/dp/B08MZHDNFY/ref=sr_1_80_sspa?crid=20IKNJL13OQ5T&keywords=wind+turbine+generator&qid=1662212204&sprefix=wind+turbine%2Caps%2C180&sr=8-80-spons&psc=1 They are offered by different vendors !
Is it possible to go from thé dc system back to tree fase? I have An vevor and it's only two wires and not very effectieve.. i thought first ti use a buck booster but it interfears with thé controler. So i was thinking why not rewire and go back to tree phase or is that not done!? Thank you greetz
ive been looking for this disassembly of wind turbine video.
thanks mate!
Glad I could help
I'm somewhat surprised that you said it matched the rated output. The maximum speed for a wind turbine is reckoned to be somewhere around 600 RPM, yet you had the generator running at 2000 RPM and it didn't blow the 40W lamp? It looks like in a real world application the generator would struggle to produce maybe 40W. I do acknowledge though that the bell wire sized extension wires that you used for both the three phase and DC to the lamp too would cause a fair voltage drop at the current draw of a few amps, and thus reduced power at the lamp...
We are going to a future video, where the power output will be tested differently.
@@scienceexxience Thanks - look forward to that!
It is the same as car alternator - 12 poles and possibly 36 slots - not much, car starts to charge from 700 rpm. For low rpm you have to have more poles. I am building with hub motor stator, it has 27 slots for 30 magnets, coils alternate direction with 3+3+3 slots per 10 magnets, I think it must work better fot low rpm
You can't "blow" the 40W lamp :D the generator won't push more current than the voltage and combined resistance define. If you spin faster the voltage goas up and the current drops. The only way to "blow" your lamp is if the peak voltage exceeds the rated voltage of the lamp for a substantial amount of time.
There's a thing called gearboxes and wind turbines often utilize them
At wich velocity and at wich Torque we get 100w?? Thanks for the Review sr..
Great video, Im glad I ran across your channel. Finally someone who actually knows what they are doing! I saw some poorly connected wind turbine videos saying the product was poor. Education obviously helps. Lol
My favorite was the testing on the roof of a car ( I just purchased the same model) there was about ten feet of romex, probably 14-3 coiled up in the seat connected to the meter and battery. Hmm I wonder why the output sucked? Lol. The turbine I have says 600w but looks identical to the one you just showed. ( I took mine apart too ) even the same off red wires.
Look forward to exploring your channel !
Thanks!
Looks very similar to a car alternator stator.
What was the height of it? Looked like 20 mm.
Did you ever find a way to get tension at the axle with two discs connected at the rim? Its been a while since I have explored this topic and I don't think I'd be able to find it just by browsing your videos.
Bonjour, merci très belle vidéo !
Very interesting, it’s weird that the Chinese don’t provide some videos with some depth to them about their products? Usually on RUclips there about 8 to 15 seconds. Appreciate your review!
Great point!
@@scienceexxience the chinese dont need to provide anything as they just copy everything
Wasn't there an O-ring between the casing shell halves ?
Excellent video clips for 👍👍👍👍👍👍👍👍👍👍 all information thanks 👍👍👍👍👍👍
Glad you enjoyed it
How much wind pushes as quickly as a drill; Looks like a Mains powered Drill so 240V to 12 to 5 volts
Thank you for this video!!!
You'r great, thanks for infos...
Any product links?
Nice and useful video
at least it's not over-rated on the output.
Cost?
hello, nice video , thank u so much , but i have one comment plz, u was saying in the title that the rectifier transform Ac to 12v Dc , but thats not what happened, in the video the rectifier transform voltage to 30v Dc and 60 v Dc later on, so to be carefull,this output Dc should not be connected to batteries ..thank u
These pmg’s are rated for 750 RPM. I’m not seeing the advertised requirements being met.
We are going to redo this video, sometime in the future to include all the various suggestions. Thx for your input.
From where to order REQUEST TO INFORM ORDER DETAILS
www.amazon.com/Three-Phase-alternator-Permanent-Generator-Alternator/dp/B08MZHDNFY/ref=sr_1_80_sspa?crid=20IKNJL13OQ5T&keywords=wind+turbine+generator&qid=1662212204&sprefix=wind+turbine%2Caps%2C180&sr=8-80-spons&psc=1
They are offered by different vendors !
That is weird that it has coil core...then you need a really good wind.
Motor Genteq x13 is a very good motor to make energy
Is it possible to go from thé dc system back to tree fase? I have An vevor and it's only two wires and not very effectieve.. i thought first ti use a buck booster but it interfears with thé controler. So i was thinking why not rewire and go back to tree phase or is that not done!? Thank you greetz
Very interesting information sir 👌👍➡️ (from India )
Thanks and welcome
Supper video
Thanks
Why open is so good
Bhai ji mereko bhejo ye altrinetr
How much do you offer to pay?
Sir im your new subscriber please test the amps load sir thank you
Will do as soon as we get to it - thx
One peec send me