Science Exxience
Science Exxience
  • Видео 51
  • Просмотров 333 369

Видео

DDM RAW Files 00336 uncut - A Step Closer to Aug/03/2022
Просмотров 62День назад
Nikola Tesla Tech: Disruptive Discharge Machine - DDM - 2022 Version x 6 (June).
DDM RAW Files 00334 uncut - A Step Closer to Aug/03/2022
Просмотров 233День назад
Nikola Tesla Tech: Disruptive Discharge Machine - DDM - 2022 Version x 5 (June)
DDM RAW Files 00333 uncut - A Step Closer to Aug/03/2022
Просмотров 6414 дней назад
Nikola Tesla Tech: Disruptive Discharge Machine - DDM - 2022 Version x 4
DDM RAW Files 00517 uncut - What Happened on Aug/03/2022 - A True Report - ref. Nikola Tesla
Просмотров 6114 дней назад
Nikola Tesla Tech: Disruptive Discharge Machine - DDM - 2022 Version 2022-08-03 Log Entry: Today is a very special, because it looks like I discovered Nikola Tesla's Radiant Energy on my machine set-up. It is different from the plasma effects of the regular discharges that appear on the disrupter(s). Currently only the minus pole disrupter (black wire) is active, while the positive pole (red wi...
DDM RAW Files 00260 uncut - A Step Closer to Aug/03/2022 - And: Parkinson's Disease Affects Michael
Просмотров 9214 дней назад
Nikola Tesla Tech: Disruptive Discharge Machine - DDM - 2021 Version x 2 - showing disruptive discharges on oscilloscope This video also answers the question, if persons with Parkinson's Disease are able to perform scientific tasks, such as building a Disruptive Discharge Machine a la Nikola Tesla: Look what Michael (not the J. Fox one) wrote on his DDM log on Aug/03/2022: Today is a very speci...
DDM RAW Files 00266 uncut - A Step Closer to Aug/03/2022
Просмотров 7114 дней назад
Nikola Tesla Tech: Disruptive Discharge Machine - DDM - 2021 Version x 2 - showing on oscilloscope - negative spikes are bigger than positive
DDM RAW Files 00326 uncut - A Step Closer to Aug/03/2022 Elon & Joe - this one's for you - both!
Просмотров 2014 дней назад
Nikola Tesla Tech: Disruptive Discharge Machine - DDM - 2022 March b Version - different interrupter shows different graphs on osci
DDM RAW Files 00319 uncut - A Step Closer to Aug/03/2022
Просмотров 1914 дней назад
Nikola Tesla Tech: Disruptive Discharge Machine - DDM - 2022 March b Version - different interrupter shows different graphs on osci
DDM RAW Files 00317 uncut - A Step Closer to Aug/03/2022
Просмотров 5014 дней назад
Nikola Tesla Tech: Disruptive Discharge Machine - DDM - 2022 March b Version - different interrupter for max # of spikes
DDM RAW Files 00312 uncut - A Step Closer to Aug/03/2022
Просмотров 6814 дней назад
Nikola Tesla Tech: Disruptive Discharge Machine - DDM - 2022 March Version.
DDM RAW Files 00260 uncut - A Step Closer to Aug/03/2022
Просмотров 7614 дней назад
Nikola Tesla Tech: Disruptive Discharge Machine - DDM - 2022/02/12 Version X-1 - showing disruptive discharges on oscilloscope.
DDM RAW Files 00259 uncut - A Step Closer to Aug/03/2022
Просмотров 83214 дней назад
Nikola Tesla Tech: Disruptive Discharge Machine - DDM - 2022/02/12 Version X -1. This video also answers the question, if persons with Parkinson's Disease are able to perform scientific tasks, such as building a Disruptive Discharge Machine a la Nikola Tesla: Look at Michal Previously, we had been working on a Modified Newman Machine (see video Exx-026 - ruclips.net/video/GEfEYRq6JGU/видео.html...
DDM RAW Files 00256 uncut - A Step Closer to Aug/03/2022
Просмотров 19514 дней назад
Nikola Tesla Tech: DDM Tool: Hantek Oscilloscpe
DDM RAW Files 00253 uncut - A Step Closer to Aug/03/2022
Просмотров 4814 дней назад
Nikola Tesla Tech: Disruptive Discharge Machine - DDM - Hantek Oscilloscope to measure the tension
Exx-028 More Ampere Bridges - Part 1 - Rail Gun - Homopolar Motor - Short Circuit
Просмотров 459Год назад
Exx-028 More Ampere Bridges - Part 1 - Rail Gun - Homopolar Motor - Short Circuit
Exx-027 Wind Turbine Generator - Unboxing & Product Review - Triphase A/C w Rectifier DC - Energy
Просмотров 135 тыс.3 года назад
Exx-027 Wind Turbine Generator - Unboxing & Product Review - Triphase A/C w Rectifier DC - Energy
Exx-026 Modified Newman Motor Update - Energy Saving Motor - Must See
Просмотров 1,7 тыс.3 года назад
Exx-026 Modified Newman Motor Update - Energy Saving Motor - Must See
Exx-025 Unbelievable! - Modified Newman Motor Uses Almost No Current. Must See! DOE Tesla Elon Musk
Просмотров 2,4 тыс.4 года назад
Exx-025 Unbelievable! - Modified Newman Motor Uses Almost No Current. Must See! DOE Tesla Elon Musk
Exx-025-FR Incroyable! - Modifié Moteur Electrique de Newman Consomme Prèsque Pas du Courant. Voyez
Просмотров 3124 года назад
Exx-025-FR Incroyable! - Modifié Moteur Electrique de Newman Consomme Prèsque Pas du Courant. Voyez
Exx-025-DE Unglaublich! - Modifizierter Newman Motor läuft fast ohne Strom.
Просмотров 2984 года назад
Exx-025-DE Unglaublich! - Modifizierter Newman Motor läuft fast ohne Strom.
Exx-025 Unbelievable! - Modified Newman Motor Uses Almost No Current. Must See! DOE Tesla Elon Musk
Просмотров 1064 года назад
Exx-025 Unbelievable! - Modified Newman Motor Uses Almost No Current. Must See! DOE Tesla Elon Musk
Exx-024 Newman's Energy Machine - An Inquiry That Turned Into A Wonderful Project
Просмотров 2,5 тыс.4 года назад
Exx-024 Newman's Energy Machine - An Inquiry That Turned Into A Wonderful Project
Exx-023 Nikola Tesla - Lecture on Running a Motor by Disruptive Discharges
Просмотров 1,9 тыс.5 лет назад
Exx-023 Nikola Tesla - Lecture on Running a Motor by Disruptive Discharges
Exx-022 Unified Theory of Electromagnetic Induction - Ending the Faraday Paradox
Просмотров 1,5 тыс.5 лет назад
Exx-022 Unified Theory of Electromagnetic Induction - Ending the Faraday Paradox
Exx-021 Simple Mechanical Homopolar Interrupter
Просмотров 1,2 тыс.5 лет назад
Exx-021 Simple Mechanical Homopolar Interrupter
Exx-020 Homopolar Motor Torque Mystery
Просмотров 4,6 тыс.5 лет назад
Exx-020 Homopolar Motor Torque Mystery
Exx-019 Homopolar Generator - Breakthrough - Voltage Multiplication!
Просмотров 18 тыс.5 лет назад
Exx-019 Homopolar Generator - Breakthrough - Voltage Multiplication!
Exx-003-DE Anomalie der Faraday Scheibe - Homopolarer Generator - Faraday Paradoxon
Просмотров 2,5 тыс.5 лет назад
Exx-003-DE Anomalie der Faraday Scheibe - Homopolarer Generator - Faraday Paradoxon
Exx-003-FR Anomalie du Disque Faraday - Générateur Homopolaire - Paradoxe de Faraday
Просмотров 1,9 тыс.5 лет назад
Exx-003-FR Anomalie du Disque Faraday - Générateur Homopolaire - Paradoxe de Faraday

Комментарии

  • @cristianvivallossoto2930
    @cristianvivallossoto2930 2 дня назад

    Good morning. As i wrote (in other video), i want to contact you for to know more on Newman´s machine and if it´s possible to buy your model. Please...?

    • @scienceexxience
      @scienceexxience День назад

      Hi, this machine started out as a new type of Newman Motor, but was much further developed. A better description now is DISRUPTIVE DISCHARGE MACHINE. It is a highly sophisticated Tesla Tech apparatus which took 20 years to bring it to its current version. If you like it: make an offer.

  • @habiks
    @habiks 13 дней назад

    So what exactly does it do? What is the end goal? Is it a simple dc-ac converter with tons of loss?

    • @scienceexxience
      @scienceexxience 13 дней назад

      This channel is probably not the right one for you. May I suggest ELECTROBOOM. ...

  • @scienceexxience
    @scienceexxience 15 дней назад

    Pic

  • @MasterIvo
    @MasterIvo 15 дней назад

    disruptor opens: BEMF= voltage impulse. Now when the disruptor(switch) closes at Vmax of the BEMF you will get a current impulse (ultra fast change of voltage from Vmax to zero volt) this creates the radiant energy. a longitudinal dielectric displacement energy flow (wave front, like audio). I call this "impulse chopping" as you cut the voltage impulse in half to create a current impulse

    • @scienceexxience
      @scienceexxience 14 дней назад

      Very nice!

    • @scienceexxience
      @scienceexxience 13 дней назад

      How do you know it is radiant energy?

    • @MasterIvo
      @MasterIvo 13 дней назад

      @@scienceexxience after years of research I understand what is going on, and I see and feel the effects.

    • @scienceexxience
      @scienceexxience 12 дней назад

      How do you see it? Does it show up on the osci? How do you measure it quantitively?

    • @MasterIvo
      @MasterIvo 12 дней назад

      @@scienceexxience You can pic the signal up with a probe attached to some conductive foil. And see it on the scope. or in my case, my shielded audio amplifier 3 meters away starts crackling loudly, before it stops working

  • @Timtron432
    @Timtron432 15 дней назад

    Great video Sir!

  • @Sacredeng
    @Sacredeng 15 дней назад

    Great work to build such a machine! Have you heard of Methylene Blue? It might help you with Parkinson's.

    • @scienceexxience
      @scienceexxience 15 дней назад

      Yes, I have heard about it, but didn't have the time to dig into or try it. Thx !

  • @MasterIvo
    @MasterIvo 16 дней назад

    I found a way. make a voltage impulse from a coil, by using a mosfet as switch. When turned on the coil stores ekectric energy innits magnetic field. when turned off, the magnetic field will produce a voltage impulse, swinging the voltage high. then at the maximim voltage , the mosfet is turned on again. This turns it into a current impulse. as the max voltage is now super fast discharged to zero. So a relatively slow voltage change of the voltage impulse is changed into the super fast voltage change of the discharge, which is the current impulse

    • @scienceexxience
      @scienceexxience 15 дней назад

      Thx Ivo! - Your suggestions are always welcome. We have come very far with our method: On Aug/03/2022 we noted in our log: 2022-08-03 Today is a very special, because it looks like I have re- discovered Nikola Tesla's Radiant Energy on my machine set-up. It is different from the plasma effects of the regular discharges that appear on the disrupter(s). Currently only the minus pole disrupter (black wire) is active, while the positive pole (red wire) is always on contact. A short video shows what I am talking about. The new plasma is of different color and much stronger in presence. Colors vary from intense green to peach, whereas the regular discharges come in purple. The new type of energy appeared once I added one (or two) coils that have no function other than that of providing a stronger back-EMF. Back-EMF or back-electromotive force, is the surcharge in energy, once you disrupt the flow of electric current, which happens, when the disrupter opens. Comparing the new set-up of today (Aug/03/2022) with the previous one: Before, I had 6 coils (3 pairs) with parallel connection, which were turning the rotor via three large magnet segments. The new set-up consists of only 4 coils (2 pairs) for turning the rotor and 2 coils for better disruptive action. It is worth noting that the pairs for the turning action have been placed apart as much as possible, because they seem to be more effective like this. I made a video on youtube for that distance effect (Exx-008 maybe?). Anyways, if I had left the coils on the table in the middle section (but without the magnet-rotor) nothing would happen. The new energy appeared only when I moved the coils away from the table (the further the better!). To my big surprise the new energy had the following effects: - The capacitor charged to 200v in 5 turns, compared to 20 turns before. - Change in color and intensity - The action would normally show up on the oscilloscope. but it didn't. I guess only regular electro-magnetic waves can be detected via the oscilloscope. Radiant energy is different. - Although the coils are all connected the same way (in parallel) the 2 new coils one of a sudden, do add a resistance to the turning of the rotor. It feels like it is a capacitive coupling, and therefor the count on running the motor only via the charged capacitors, cannot be counted yet. For future reference, it was roughly 50 turns when running the machine only with the charged capacitors (175V). - The new energy helps turning the unit for a very short time every three turns. ... more strange stuff happened ... will be posted at a later day. I decided to make this log of events, for easier review later.

  • @swieberdpicasso2215
    @swieberdpicasso2215 16 дней назад

    What's new? Three years ago you guys also had an oscilloscope hooked on to a modified newman motor.....

    • @scienceexxience
      @scienceexxience 15 дней назад

      Well, we had modified the machine so much, that it no longer could be called a NEWMAN machine. It was more like a Tesla Interrupter with added features. And then this happened, as noted in our DDM log: 2022-08-03 Today is a very special, because it looks like I have re- discovered Nikola Tesla's Radiant Energy on my machine set-up. It is different from the plasma effects of the regular discharges that appear on the disrupter(s). Currently only the minus pole disrupter (black wire) is active, while the positive pole (red wire) is always on contact. A short video shows what I am talking about. The new plasma is of different color and much stronger in presence. Colors vary from intense green to peach, whereas the regular discharges come in purple. The new type of energy appeared once I added one (or two) coils that have no function other than that of providing a stronger back-EMF. Back-EMF or back-electromotive force, is the surcharge in energy, once you disrupt the flow of electric current, which happens, when the disrupter opens. Comparing the new set-up of today (Aug/03/2022) with the previous one: Before, I had 6 coils (3 pairs) with parallel connection, which were turning the rotor via three large magnet segments. The new set-up consists of only 4 coils (2 pairs) for turning the rotor and 2 coils for better disruptive action. It is worth noting that the pairs for the turning action have been placed apart as much as possible, because they seem to be more effective like this. I made a video on youtube for that distance effect (Exx-008 maybe?). Anyways, if I had left the coils on the table in the middle section (but without the magnet-rotor) nothing would happen. The new energy appeared only when I moved the coils away from the table (the further the better!). To my big surprise the new energy had the following effects: - The capacitor charged to 200v in 5 turns, compared to 20 turns before. - Change in color and intensity - The action would normally show up on the oscilloscope. but it didn't. I guess only regular electro-magnetic waves can be detected via the oscilloscope. Radiant energy is different. - Although the coils are all connected the same way (in parallel) the 2 new coils one of a sudden, do add a resistance to the turning of the rotor. It feels like it is a capacitive coupling, and therefor the count on running the motor only via the charged capacitors, cannot be counted yet. For future reference, it was roughly 50 turns when running the machine only with the charged capacitors (175V). - The new energy helps turning the unit for a very short time every three turns. ... more strange stuff happened ... will be posted at a later day. Any suggestions?

    • @swieberdpicasso2215
      @swieberdpicasso2215 13 дней назад

      @@scienceexxience Sorry but I seem to have missed a great lot of your research. I follow you since Exx-001, quite a few years ago, but after Exx-027 there is a huge gap of a few years missing! Now you appeared again a few day's ago. Where have hou been and what have you been doing? And what is this DDM log? Your website doesn't work anymore, so that can't be it. It seems to me that you kept a graet deal hidden from the public since march 2021....

    • @scienceexxience
      @scienceexxience 13 дней назад

      ruclips.net/video/IqfoMf7N1V4/видео.html It's much more difficult for me to publish nowadays, so I concentrated more on mental work. But I am still going to continue publishing the more important findings; like I do now with the raw files. If I have more time or help, I'll continue with the videos. Thx for your input.

    • @swieberdpicasso2215
      @swieberdpicasso2215 13 дней назад

      @@scienceexxience okay, but what is this DDM log: 2022-08-03 you were talking about above?

    • @scienceexxience
      @scienceexxience 18 часов назад

      It is going to become apparent soon.

  • @scienceexxience
    @scienceexxience 18 дней назад

    Today, November 16, 2024 this video was pulled from the private into the public realm. Enjoy. More great videos to come! Stay tuned. It's all about TESLA's Ether.

  • @Jaco-b9f
    @Jaco-b9f Месяц назад

    Where is South of the magnet, whats the orientation of magnetization?

    • @scienceexxience
      @scienceexxience 15 дней назад

      In another video, using the same parts I remember having placed a compass close to the magnets.

  • @Insert-name-here00
    @Insert-name-here00 Месяц назад

    These pmg’s are rated for 750 RPM. I’m not seeing the advertised requirements being met.

    • @scienceexxience
      @scienceexxience 15 дней назад

      We are going to redo this video, sometime in the future to include all the various suggestions. Thx for your input.

  • @Whatmyoldname
    @Whatmyoldname Месяц назад

    Why open is so good

  • @MichaelK.-xl2qk
    @MichaelK.-xl2qk Месяц назад

    The only explanation that describes the phenomenon, is that the copper inductor disc is moving relative to the locally polarized ether, which is dragging slightly behind the magnets in the way an induction motor's rotor has a 2%-6% slip rate behind the stator's RMF. This small differential, explained by conventional physics inertia, is enough to produce the relative motion between the inductor and field.

  • @clarencefoster5068
    @clarencefoster5068 Год назад

    So that's a squirrel cage! Have you tried using a coil as a receiver see if you can get any induction might be the Nikola Tesla motor you're searching for. He would have made it wireless. Your squirrel cages are perfect. I bet it works out for you

  • @KOl-xj4jt
    @KOl-xj4jt Год назад

    scooter motor be like this

  • @ramzeneger
    @ramzeneger Год назад

    Thank you for this video!!!

  • @fxeconomist
    @fxeconomist Год назад

    But wait, you say N inside and S outside. This means magnets are axial, not radial. Radial magnets would show both poles on the big face. I know radial magnets give AC in a disk setup. I was thinking the drum would give DC because both brushes would be in the same relative position. But you actually use axial magnets, right ? Anyway, I'll have to try my toy...

  • @22fingers
    @22fingers Год назад

    to get the voltage between axles you need to switch the magnetic polarity on one side then it will work as expected

  • @cronicjohnson
    @cronicjohnson Год назад

    Where can i get these magnets ? All i can find are small junky ring magnets

    • @scienceexxience
      @scienceexxience Год назад

      I was lucky having found them on one of these Internet magnet dealers. But it was a one-time deal. They never got them in again. But u can find them in China...

  • @AdolfoRiosPitaGiurfa
    @AdolfoRiosPitaGiurfa Год назад

    Tension=E is directly proportional to frequency and inversely to wavelength, i.e.SIZE, diameter of the Faraday´s disk

  • @dkdyker
    @dkdyker Год назад

    Hello sorry just seen your video. I have run a motor on disruptive discharge, my video is in the link.

    • @dkdyker
      @dkdyker Год назад

      ruclips.net/video/7v6apE1a_f4/видео.html

  • @kaluvanhariharan4256
    @kaluvanhariharan4256 Год назад

    Nice and useful video

  • @jaymschow6457
    @jaymschow6457 Год назад

    How long it rims or to stop?

  • @hermandormehl
    @hermandormehl Год назад

    This is impossible unless there is a third force present, like gravity, the elusive aether. A normal homopolar will open a gateway to the aether, whatever that may be but bit works 😂 thanks for the vid.

  • @sorejack
    @sorejack Год назад

    i wonder what would happen if you connected the faraday disks with a glass tube, like in the early static generators?

  • @edwingolddelirium
    @edwingolddelirium Год назад

    You can do that also with the axle from a wind turbine. Then it spins also without the wind .the wind is then only the starter.One serpent coil to drive the shaft and three serpent coils for generate your home.

  • @magnetomancer
    @magnetomancer Год назад

    Good demo showing conductive chain method to eliminate friction at the rim.

  • @MrLiamHenderson
    @MrLiamHenderson Год назад

    This is EXACTLY how the mach 15 US military rail gun works. Same principle. EDIT: love it BTW

  • @FockewulfAz
    @FockewulfAz Год назад

    That is weird that it has coil core...then you need a really good wind.

  • @johnconnor3849
    @johnconnor3849 2 года назад

    So if the magnetic field isn’t intrinsic to the magnet itself and actually an induced field in the space around it I wonder what happens if you spin the copper disk and magnet together while simultaneously moving the whole generator through space. Think like 3 generators on a planetary gear.

  • @nerog3136
    @nerog3136 2 года назад

    Wow no current. Just voltage.and it's producing torque

  • @nerog3136
    @nerog3136 2 года назад

    Awesome video. Keep up the good work

    • @scienceexxience
      @scienceexxience Год назад

      Thanks, will do!

    • @scienceexxience
      @scienceexxience Год назад

      A major update is coming on this machine. I just dont know yet when it is ready.

  • @antonnym214
    @antonnym214 2 года назад

    This would be more interesting and engaging if you narrated what you were doing in real time, instead of just printing text on the screen. All good wishes.

  • @hassanel-hajj3234
    @hassanel-hajj3234 2 года назад

    hello, nice video , thank u so much , but i have one comment plz, u was saying in the title that the rectifier transform Ac to 12v Dc , but thats not what happened, in the video the rectifier transform voltage to 30v Dc and 60 v Dc later on, so to be carefull,this output Dc should not be connected to batteries ..thank u

  • @scienceexxience
    @scienceexxience 2 года назад

    Spring 2022 is already passed - and there is still no update on our Newman inspired motor? Rest assured it is coming. We have progressed a lot, unfortunately with no time to document it. But it will be done.

  • @salamdeo
    @salamdeo 2 года назад

    From where to order REQUEST TO INFORM ORDER DETAILS

    • @scienceexxience
      @scienceexxience 2 года назад

      www.amazon.com/Three-Phase-alternator-Permanent-Generator-Alternator/dp/B08MZHDNFY/ref=sr_1_80_sspa?crid=20IKNJL13OQ5T&keywords=wind+turbine+generator&qid=1662212204&sprefix=wind+turbine%2Caps%2C180&sr=8-80-spons&psc=1 They are offered by different vendors !

  • @davidvandervelde3246
    @davidvandervelde3246 2 года назад

    Is it possible to go from thé dc system back to tree fase? I have An vevor and it's only two wires and not very effectieve.. i thought first ti use a buck booster but it interfears with thé controler. So i was thinking why not rewire and go back to tree phase or is that not done!? Thank you greetz

  • @JustNow42
    @JustNow42 2 года назад

    The magnetic field is going into the cage and the Cu tubes ( rods) are crossing it at high speed and therefore creating the voltage you measure. The field is exiting through the side dishs and creating the voltage you measure over the side dishs. Nothing strange at all. It is one big misunderstanding.

  • @JustNow42
    @JustNow42 2 года назад

    There is no reason to rotate the magnets. The voltage is created in the Cu plate as it rotate through the magnetic field. The field is not rotating regardless of the magnets are rotating or not. What you are doing muddle up what really is happening.

  • @JustNow42
    @JustNow42 2 года назад

    Why do you rotate the magnets? It does not make any difference. The field does not rotate.

  • @ovidius2000
    @ovidius2000 2 года назад

    whatIfThisIsCombinedWithAVanDeGrafGenerator?

  • @pmgriphone
    @pmgriphone 2 года назад

    You are most likely measuring stray magnetic field lines being picked up by your probes. You should repeat the experiments with fixed magnets (only the conducting disk rotating).

  • @nr7000000001
    @nr7000000001 2 года назад

    I wish you had more experimental evidence to support this theory. By the way your experiments are wonderfull. But to me there are still many options open. For example, what is this contact zone exactly? Why do the <horizontal connecting bars between the 2 discs> not create a contact zone? Because no current flows? But why does the current not flow in the fixed horizontal bars? The difference between the horizontal co-rotating bars and the contact brushes could be: 1 if there is a speed differential with the disc or not. 2 rotation speed differential. 3 difference in electrostatic potential. 4 difference in work dissipation (the voltmeter dissipates energy, the brushes have sparks and emit more stuff due to inefficiency of contact). 5 on/off sliding contact vs. continuous contact. 6 permanent influence of earth magnetic field or gravity field on the brushes vs. rotating influence on the bars. I guess current flows in the brushes because they dissipate the energy more effectively (after which you get the contact zones) and the horizontal bars are too efficient, they equalize and balance the energy too much.

    • @scienceexxience
      @scienceexxience 2 года назад

      Thanks these questions. I will try to respond in the coming days, when I have more time.

  • @pkillor
    @pkillor 2 года назад

    Due to the difference in impedances of air and metal, on the energy wave... you have a train of transient reflected waves... which in the air we see as a party of sparks!

  • @wyattbielert2929
    @wyattbielert2929 2 года назад

    Could you use impulse electricity in the form of a spoked rotor like a commutator that cuts the connection and then reconnects it after x degrees of rotation or a capacitor that captures the dc impulse

  • @franksabolich3996
    @franksabolich3996 2 года назад

    Where do you get radial magnets? They are hard to magnetize that way. Can somebody post a link please

    • @scienceexxience
      @scienceexxience 2 года назад

      We found them in China, but have no link ATM.

  • @thienvu4503
    @thienvu4503 2 года назад

    spin 2 disk opposite direction of each other

  • @will_doherty
    @will_doherty 2 года назад

    I'm somewhat surprised that you said it matched the rated output. The maximum speed for a wind turbine is reckoned to be somewhere around 600 RPM, yet you had the generator running at 2000 RPM and it didn't blow the 40W lamp? It looks like in a real world application the generator would struggle to produce maybe 40W. I do acknowledge though that the bell wire sized extension wires that you used for both the three phase and DC to the lamp too would cause a fair voltage drop at the current draw of a few amps, and thus reduced power at the lamp...

    • @scienceexxience
      @scienceexxience 2 года назад

      We are going to a future video, where the power output will be tested differently.

    • @will_doherty
      @will_doherty 2 года назад

      @@scienceexxience Thanks - look forward to that!

    • @paruhblgen4222
      @paruhblgen4222 2 года назад

      It is the same as car alternator - 12 poles and possibly 36 slots - not much, car starts to charge from 700 rpm. For low rpm you have to have more poles. I am building with hub motor stator, it has 27 slots for 30 magnets, coils alternate direction with 3+3+3 slots per 10 magnets, I think it must work better fot low rpm

    • @kryszczuk
      @kryszczuk Год назад

      You can't "blow" the 40W lamp :D the generator won't push more current than the voltage and combined resistance define. If you spin faster the voltage goas up and the current drops. The only way to "blow" your lamp is if the peak voltage exceeds the rated voltage of the lamp for a substantial amount of time.

    • @shamancredible8632
      @shamancredible8632 Год назад

      There's a thing called gearboxes and wind turbines often utilize them