Fire Alarm Test #58 -Loud Bell Test
HTML-код
- Опубликовано: 10 сен 2024
- Test of a 4100U system in a factory comprised mostly of very loud "charming" 2901 series bells.
Follow me on Twitter & Instagram (Links Below)
TWITTER: / safetech0415
INSTAGRAM: / officialsafetech
the tbar at the beginning has for sure seen better days...
and most of the others have aswell!
Some of those pull stations do not look like there in good shape
The horn snuck up on you & said I'm not letting the bells take over the entire facility lol
What’s the time stamp?
@@idkanymore9590 7:14
@@Saphman4 thank you
Love the old bells. Safetech is awesome
Thanks for viewing!
Some of the Simplex pull stations I saw in this video are pretty dirty!
Yes and one has pant on it and you are not to pant over it.
JimLiElevators I Watched Your Elevator Videos!
The pull station at 8:12 is very cool! those are almost never seen!
Looks like it almost added with a 2903-9838 light plate
It's a CPG MPEX Explosion proof pull station
Bell. Alarm bells get some kind a cool
Love the bells! My schools used bells (and bell/strobes) so I'm very fond of them.
Thanks for viewing!
Gives me flashbacks of Twoplyboy’s videos
I remember their videos
You know it's loud when the mic is maxed out. Nice video!
I love the sound of the bell at the 9:08 mark
Yay!!! Bells!
Something different.Thanks for viewing!
SAFETECH Those are basically Simplex’s version of the Edwards 439D-10AWC bell
@@CJ9899 they're Simplex 2901-9333's.
Simsfanatic1997 is back BTCP I know, but they have the same gong frequency of the Edwards ones
@@CJ9899 i know, so did the 9333's predecesser, the simplex 4080.
Now That's a cool system
Thanks for viewing!
Old fire bells and a mechanical horn... classic's
I know that pull stations collect dust over time, but jeez, how do some of those pull stations get that dirty and black?
Maybe they’re just very old. After all, that place does have old fire alarms. And the building itself looks old.
Twoplyboy anyone?
Yes
here's what the system is:
an old Faraday horn
Simplex 2901-9333 bells
Simplex Smoke detectors
Simplex 4251-20's (some of them are in bad condition)
an explosion proof pull station
a grey explosion proof bell
Simplex 4100U set on continuous
Also an adt pull
Now I know, thanks
That's probably not a 6180 horn. Craig Baker has a 6180, and it's the AC version. So, it's probably a Faraday 6220 horn.
Wow great video video and great alarms so so so is cool and BELLS!!!!!!!!!!!!
Thanks for viewing!
SAFETECH you’re welcome
This is so gonna be me in a certain amount of years
question what's the requirements to become an inspector for Johnson Controls Simplex and filming as long as I do my job correctly is ok right.
Best of luck! Study hard, gain experience, and get those certs.
@@safetech which certs do I need to become an inspector with u guys nicet level 1 2 3 or 4
fyi it was 2008 I first got to help out some simplex techs
Sounds like a telephone ☎️
The only Simplex panels we have yet to see you Test is a 4004 and a 2120
Not many “original” 2120s around anymore. A few 4004s but they too are a dying breed.
Why is this so satisfying
@SAFETECH Suprised to see that the bells aren’t on strobe Plates as I see a lot of these bells in my area and many other areas on strobe plates. Any reason why they didn’t add strobes or mount the old bells on newer 4904 strobe plates when the panel was replaced, Since this panel looks to be A 4010ES or a 4010
I never see the battery test. Why? Transfer from AC to DC? Smoke sensitivity? No heat detectors?
I wouldn't wanna be the guy walking around a building testing the fire alarms. My ears would be BLEEDING!!!!
I love bells
that floor seen better days
Nice! Those Simplex bells sound amazing. What was that pull station around 8:18? I’ve never seen it before
Explosion proof device. Its located in a chemical storage area.
National Time
there's a chance I am becoming a Johnson Controls Fire Alarm inspector-if so what's the rules in regards to filming like you do sir ?
Why are you not pulling the T-Bars?
break rods cause he dosent wanna replace em/doesent have a replacememt
Alexanders Alarms its also easier just to key it
Reminds me of WEM! They have a Simplex 4100U InfoAlarm system, with Simplex 2901 bells like these plus the 9322 and 9724 bells and a bunch of bells like Edwards and Notifier!
Reinman will service there soon XD.
Do they not have any strobes in the building?
Very cool! Nice job!
Hello! I really enjoy your videos. I have a question I was gonna ask in one of your previous videos: when you’re performing a walk test on a system like this, what does it mean when the bells/horns sound a different number of times? Is it to specify different zones so you know that the system is responding to the correct device?
Yes you are correct. In this case the corresponding zone is sounded. If the system is addressable the notification appliances will typically sound out the devices address.
SAFETECH oooooh! Okay cool! That makes sense! Thanks! Great video! I love watching your channel.
I also love this channel
Thank you!
SAFETECH welcome
Can’t Wait!
Awesome! Dang straight those are bells are loud lol 😄!
Great video!
0ir
1
WAqQ
Thanks for viewing!
+SAFETECH Totally. It's a welcome change from all those mechanical horns and electronic horns 😉
YES!!! Simplex 2901-9333's.
0:05 How did the bell ring four times (1 second stop) and four times?
Jhebert Dela Cruz that’s how the walk test usually works with Simplex panels. It’s like how Silent knights panels just put out the alarm on how many seconds the zone is.
YAY, CONTINUOUS!!!!!!!!!!
Does two short mean zone 0 or zone 10?
Volvo B10M I think it means that zone has already been tested
Can't have horns and bells on the same system.
I'll bet the horn replaced a dead bell at some point in the past. Twoplyboy had a two part bell test in a big building that had three horns but the rest were bells at the beginning of part 1 there was an EST integrity with a strobe and a dying Edwards/EST Adaptahorn and at some point in part 2 there was an Edwards 892 horn.
@@GaryBeltz to answer all of you, the horn is actually a Faraday 6180
Which, replaced a dead Simplex 2903 bell back in the past.
twoplyboy vibes
Keep the t bar and replace the fire bells
That 4100u most likely has conventional modules put in from the retrofit
What kind of pull station was that around the 8:20 mark? Never seen one like that before.
It's an explosion-proof pull station
Looks like it used to be a Simplex 4002, or even a Simplex 4100 system set up as conventional! I saw something like that before.
4100 is more likely
@@CJ9899 That's likely. There's a mall a few towns over from where I am that was built in 1991 with a Simplex 4100 system set up as conventional, with 2901-9838 horns on 4903-9101 strobe plates (several stores have TrueAlert horn/strobes.)
wileyk209zback My mall in Ontario Canada has a large 2 stage EST 3 system with integrity horns and 270-GAOs, and another section with a Simplex 4100U and 2099 2 stage t bars, 2901-9838 horns
Great video 😀👍👍
Thanks for viewing!
Cool video!
Thanks for viewing!
Don’t those things have a continuous sitting?
are they on march time
Hi I like that
3:24 we have those detectors in the UK, they r Hochiki smoke detectors. That’s rebranded by Simplex
More like you have simplex detectors rebranded by Hochiki but ok
@@lordanthony2253 Fun Fact: Simplex has had a lot of their devices made for them by Hochiki, I'm not sure when it started but I'm pretty sure that particular model of detector was made for Simplex by Hochiki.
Nice video, is your job a FA inspector
Gianni Villeda yes, this is his job
he is a field inspector for Johnson Controls.
If the panel said November 18 on the date, how come this was uploaded on November 17?
Spooky
timestamp maybe
Actually it’s the 16th of November 2018
6’
I like bells a lot more than horns. Too bad they are not more common.
Why have I never seen bells in schools before?
What is steel plant trigger disable?
System trips another panel in an adjoining building. The disable inhibits that feature for testing/service purposes.
What sort of factory is it? A place where they make headache medication? XD
Wait a minute, is this by any chance in Canada because I dont think that this system would be up to code in the US
It is not to code in Canada either
@@cameronhewitt7909 yeah, but I saw CSA approved exit and emergency lighting in the background and you cant install these in the usa so this has to be in Canada,
There's no by-law national code in the USA. States, counties, and even cities can establish their own code or modify the national code.
Nothing against code here. Building is old with no major structural changes.
@@safetech Okay, Well if the building is old, than its up to code but I'm just curious whether this building was in Canada because I saw some Canadian exit signs in the backgrounds despite seeing a US flag hanging
Is this in Canada or in the US?
US
No strobes? How can they get away with that???
Grandfathered in
Welcome to the 50s my guy
What is "STEEL PLANT TRIGGER DISABLE"?
There is an adjoining building with a separate panel tied into this one. Did not film that one.
What panel and horns did the adjoining building have?
@@GaryBeltz I am not sure about the horns, but the panel in the other building is a Simplex 4010. Look at the LCD on the 4100U as @SAFETECH is scrolling through the TROUBLES at about 10:25
can someone tell me what horn was that
Possibly a 2901-9838.
Isn’t that the 20 V vibrating belt
Nice
Thanks for viewing!
All the pull stations are dirty
Out of curiosity, has anyone in the FA community taken advantage of the Premiere feature prior to this video?
What feature?
@@TheJakeman789 Posting premieres on RUclips. I suggest you look up "RUclips premieres" on Google.
Where is this place located?
2020 anyone?
This video was awesome. But I would say that the Simplex 4025120s I need a good cleaning.
Lmj
How about maybe doing a regular alarm with out the walk test next time
POV: You are the principal.
O”l
3:34 8:11 >8DDDDDDDDD
Will The Blue Angels and other Military aircraft Flyover American Secondary Schools Colleges and Universities OUSD Job Training Centers DeFremery School Santa Fe School Recreational Centers For These Drills?No or Yes, Not Until 2021 due to COVID
Simplex: Hello! I am here to replace you
Bells: I don't think so. *IMMA FIREN MY LAZOR!* *Boom!*
Simplex: *Dies*
Bells: Deal with it.
What 💀
Angelina
Gives me flashbacks of Twoplyboy’s videos
i love bells
Angelina