excellent video demonstration touching the basics of cooling/heat load calculations and parameters to be taken down from the site for accurate cooling load. Please upload more examples and situations to understand better.
hi! i learned a lot with your video but now i have to estimate the thermical load of a big freezer (-16 celsius). i did everything correct at dimensioning the space, but i cant set the temperature to -16 celsius. can you help me? it is supposed to be a simple task but im messing it up
Hello dear. Electric and load lighting should be taken from Ashrae tables. These table gives the recommended electric and lighting loads depending on area usage type.
It's because the region / location of the project has an ambient relative humidity LESS THAN the interior RH setpoint. So any outside air you bring into the space will have a "drying" effect on the space. Therefore, negative latent cooling.
excellent video demonstration touching the basics of cooling/heat load calculations and parameters to be taken down from the site for accurate cooling load. Please upload more examples and situations to understand better.
thanks for your comment, i will upload on continuos basis :)
i checked all the hap tuts on the youtube ..but this is the best..because its a studycase
Alex Alex Appreciating your feedback
Can you please recommend some lisps that calculat area ??
Thanks in advance !!!
Really Very Helpful Video Tutorial. Many Many Thanks. Please keep uploading....Wish you all the best.
Sujan Saha thanks for your feedback, will upload very soon
Short and sweet. Good vid, thanks
very clear hap tutorial.kindly upload more videos
The good thing I know from a videw.. I see ther r other selection for show the report,
Short and Informative!!
Glad it was helpful!
This video was really helpful . thank you.
nizam akram it is my pleasure
Thank you so much for this tutorial.
Is there any way to set up on hap that there is going to be an exhaust fan or system in some specefic areas?
Good class .expect more videos from you
nice video, Thank you Engineer Ali
Thanks Eng. Khalil for your valuable feedback
THANK U .ITS VERY HELPFUL
thank you
Good Job 👍
Very Helpful. Can you make additional video on different type of system.
hi!
i learned a lot with your video but now i have to estimate the thermical load of a big freezer (-16 celsius). i did everything correct at dimensioning the space, but i cant set the temperature to -16 celsius. can you help me?
it is supposed to be a simple task but im messing it up
I really liked your video.
Can you please share hap set up for installation .
Thank you sir.
if a buliding has a total glass and want to perform load calculation by hap is it possible? if yes then how to do it?
Sure. Let's assume exposure N is 10x10 meters. So make wal10x10 and add max window dimension you can use. Lets say 9.95x9.95 or whatever works for you
is there any othr way becz i tried it wall diminsion need to be more bigger(nearast is not accptable by hap
No other way. I tried this before. I dont think it should be too much bigger. How much bigger you mean?
Really helpful .but how will we take elecrtic and lighting load for diiferent cases .please tell me the ans .is there any thumb rule dependent on area
Hello dear. Electric and load lighting should be taken from Ashrae tables. These table gives the recommended electric and lighting loads depending on area usage type.
@@AMJEngineering Dear AMJ ENG. please, do tell us if those tables are paid and if not, where can we find them from. Thank you very much!
Hi,
Can you please explain why there is negative ventilation latent cooling load in Air system design load summary?
It's because the region / location of the project has an ambient relative humidity LESS THAN the interior RH setpoint. So any outside air you bring into the space will have a "drying" effect on the space. Therefore, negative latent cooling.
Hi
Why you did not consider the exposed perimeter for the floor on the ground floor
thanks
Welcome
Please, do you know why heat gain through the floor slab on ground is always zero?
It is zero if ground is above conditioned space. Otherwise, not zero.
@@AMJEngineering It's always zero even "on grade". Try it yourself. After running the calculation check floor transmission, it's always zero.
Hello, I check my view report and follow your complete steps, but im getting only one page? can you please tell me the problem? Thanks
Eric G. Magnaye
Hi Eric, try to take screen shots and send me, or short video to ali_jamaleldeen@hotmail.com
ok i will, please wait.. thank you for your response brother.
Please check your email, thanks
Please check your email, thanks
if we cross check by thumb rule is does not match.
yes you are right according to his calculation result is showing 64sqm=1Tr which is strongly wrong
Can u share the cad plan of building
sorry not available
Something is wrong how its possible for 64sqm=1Tr (Suppose 1800 sqm = 96kw meant 28 Tr)
Hello dear.
It is normal for green residential buildings.
Shukran
Thankyou Sir
when i create a second system its not displaying their ..plz help?
MOHAMMED OMER FAROOQ
Didn't get your point
stp je peut avoir le lien de téléchargement, ce logiciel est très intéressant
merci d'avance
voici le lien
download1349.mediafire.com/nc61imnja5yg/gfiq6jmpck42q4p/HAP+v5.10.rar
plaase can u provide us with the drawing
This is not proper one.