Gas Mask 101⎮Don’t WASTE Your Money!
HTML-код
- Опубликовано: 10 июл 2024
- 🔥Gas Mask on Amazon: amzn.to/2RX1m2n
🔪Prepping Supplies amzn.to/2tFkIxy
Here are my picks of the best gas mask & what to look for when buying a military surplus gas mask. I go over the M40A1, the MCU 2 & a cheap Israeli Gas Mask. Also review filters and how to buy cheap filters. Links Below 👇🏼👇🏼👇🏼
✅M40A1 Gas Mask amzn.to/394oVu8
✅Israeli Gask Mask:amzn.to/3919rXS
✅Israeli 40mm NATO Filters: amzn.to/36Q9rsd
🏕Recommended Survival Gear🏕
{Support the channel with these affiliate links 😉}
🔴ESEE 5P Black Tactical Survival Knife w/ Sheath
amzn.to/2JjxPsh
🔴Gerber LMF II Infantry Knife
amzn.to/2Q0Us74
🔴LuminAid Lights
amzn.to/2D9HQI2
🔴550 Fire Cord
amzn.to/2D9RY3K
🔴Mountain House Food Storage
amzn.to/2SvWKNs
🔴LifeStraw
amzn.to/2SjvGRr
🔴StrikeForce
amzn.to/2Q9b6S0
🔴Outdoor Vitals StormLight
amzn.to/2Q2w1Go
⛺️LET'S CONNECT⛺️
The Blog
www.SurvivalKnowHow.net
Like me on Facebook
/ survivalknowhow
✅Gas Mask on Amazon: amzn.to/2RX1m2n
✅M40A1 Gas Mask @t
✅Israeli Gask Mask:@t
✅Israeli 40mm NATO Filters: @t
🔪Prepping Supplies amzn.to/2tFkIxy
Great video. I would suggest that you vacuum seal the filters in Mylar bags with a silica gel sachet and a small oxygen absorber sachet. From my limited understanding, the expiration date of a gas mask filter is based on two things: the degradation of internal glues and mechanical components like gaskets (unavoidable) and more importantly penetration of the wrapping by air which results in the activated carbon part of the filter becoming "spent". Normal plastic has a remarkably high amount of permeability. (If you dont believe me, bulk buy Kendal Mintcake and observe the room filling with the smell of peppermint penetrating the plastic wrappers!)
Mylar is foil backed plastic ... I reckon fully vacuum packed in mylar most filters will last literally for decades beyond their stated end-life.
Thanks again for the sound advice on gas masks
You've got a pencil neck, Malc. How you gonna survive the Apocalypse?
Full-hoods are better
@@ComradeMoyer_-Tankmaster496- Agreed mate.
The gas mask on amazon too expensive but in my country so cheap like a 60.000IDR or 5-6USD
My son gave us a couple when he got back from two tours in Iraq. I scared the UPS man when I went to door in mine, I used mine for chopping onions one day.
tell your son i said thank you for your service
I always use my gas mask to cook with onions
the egg with the legg Same. My family laughs at me, but I don’t have to worry about the fumes.
Mountain MawMaw lmao 😂
Cooking with a gas mask seems a bit overkill lol
Please make a video on when and when not to use a gas mask. I am a firefighter and know that many people would run into a smoke-filled room with only a gas mask on, thinking it would protect them. This is not true! It is important to always remember that those masks will only help if there's enough oxygen around, which is why we carry those big oxygen bottles on our back.
Till Hirte Remember respirators (only called gas masks by civilians) only work against large chain molecules, such as nerve agents, CS, VX, Sarin.... It will also protect you against some chemicals that are given off by combustion (cyanides...). And as you point out if you are in an oxygen deficient environment it won’t work (no oxygen to breathe anyway).
I’ve never heard any firefighter call their air bottles (tanks) oxygen bottles?
They are called "Air Purifying Respirators" they only clean what is already there, they don't produce anything new. As you say, they won't give you oxygen, just take crap out of the air before it gets to you.
Thank you very much for the info! :D
@@peterking2651 You mean you never heard a firefighter call it an oxygen bottle 'before', don't you?
The big bottle is compressed breathing air. Straight oxygen would make you a walking bomb in a fire.
You know damn well why you're here.
VoidUprising Yup you got it..
Yessir
I'm here because I'm an enthusiast of respirators?
PenisesAndCucks2020
@@azad-4286 exactly
When donning the respirator, immediately after you have the straps secured and a seal is made, blow out and shout "gas, gas, gas" this will expel any thing that may have have been trapped, before doing the cannister test.
I see you have passed your defense GAS training! This is a very important yet life saving tip thanks!
And remember y'all, just because you can't smell, feel or taste the gas, or your eyes aren't burning doesn't mean your mask is clear inside. Vomit gas took advantage of this in WW1.
10:22 Something you failed to mention os that some filters that were made before the 60s usually have asbestos in them, can include chromium, and to top it off, covered in lead paint. In paticular, the russian gp-5 mask filters have thos problem. These masks absolutely do have an expiration date where the internal paper might degrade and allow the inhalation of these chemicals. Just a word of warning that I got while buying a gp-5 for the memes.
the GP5 is really just the most common mask with the problem, although technically their main issue isn't even the asbestos, its the fact that they are old masks that are simply not reliable. dangerous are really old masks (ww2 and earlier) or specialized systems like old rebreathers, those can contain toxic chemicals, and really should never end up on someones face.
Not to mention how much a pain gost cans are
I'm buying a gas mask to be better prepared for taco Tuesdays.
LOL
XD
Getting mine for protesting
Madison C imagine protesting for a cause that doesn’t stand for anything
Skrilnex gas masks protect against gas,not viruses.
You have a beard, most gas masks don't work with beards maybe tell the viewers this
row0111 ....he probably DIDN’T say THAT because THEY WORK FOR him. But you are right....SOME don’t
@@m118lr not the point, virgin
It should be pretty common sense that there wouldn’t be a proper seal.
They will with a short tight beard. The problem is they have to Seal. Bushy facial hair , prevents a tight seal. They are also only good against the respiratory aspect, of a chemical agent. They will not ( for instance) prevent mustard from burning your skin. Which is why they have full chem suits, and gloves. They will also not prevent absorption through the pores of the skin, of nerve and blood agents( Like Sarin, or Lewisite).
masks work just fine with a beard, but its always a gamble with older masks, new ones have made sure to help with that but your older ones may have trouble
Should make a video on clothing for this kind of situation
So very true a mask alone will not save you from numerous nerve and toxic agents
yeah, that is a good idea. I think I already threw away my old chem gear and rubber booties from the Air Force.
A lot of the military gear is not as good as some. A lot is a field-expedient kind of "good-nuff" kind of thing. Actual CBRN teams have far better protective gear than your regular soldier. That gear also takes a lot longer to put on compared to general NBC/CBRN field gear. I have seen average stuff and it's a 2 piece set of bottoms and a top. I have a couple sets of CBRN gear which consist of two one-piece coverall garments which must be worn at the same time, the under layer having rubber gaskets at the ankles, wrist and face for meeting with Butyl rubber ancillary equipment like overboots, gloves and respirators. But it all takes quite some time to get into, as those rubber seals are quite tight and it takes time to put on. Not good in an emergency situation you are already amidst.
Just a good old East German rubber nbc suit
Every situation is different. And protective clothing changes with what chemicals, properties and concentrations are found. Bio and radiation are pretty simple when it comes to protective clothing. PPE is a last resort of protection, always avoid direct contact even when wearing the right gear. Breakthrough times very.
7:45 for the M40 gas mask, the hood should already be folded on the gas mask: That way, it's much faster to deploy its protection.
The mcu2 gas mask can accept both a left and right filter so you can use both or either left or right for weapons firing. Another little known fact is it is also radio adaptable and has the plug in adaptor for a mic inside.
That's only for the mc-2a/p which is a mask I have
I really need an indepth demonstration of how to put a mic in my mcu 2/p
As far as I know both gas masks and filters have expiration dates (10 years/ 5 years). That's why second hand masks and filters are so cheap. They probably passed their expiration dates by a few years.
More than likely they'll be used by civilians for heavy debris/ash so the paper and charcoal should be just fine enough for it.
likota123 filters have expiration, masks do not they just need to be well maintained
The activated charcoal is only starts to degrade after being exposed to air.
@@fredhowk4044 correct. the 'rule' is once exposed to air (seal is broken on the filter), it's good for 1 year.
I don’t know if they do expire (when sealed) you should be fine if it’s sealed
I use gas mask while cleaning up my dog's crap when he defecates at home.
wow! Those must be some powerful shits he has!
i also do this and it really helps
I use mines to clean up the bathroom.
Use mine when clearing my cats litter tray
@@Tragicide same. Army taught me the value of a mask for home chores
A good way to be able to don or doff your mask quickly is when you put it on for the first time adjust all the straps to where you want it, then when you take it off only undo the bottom two straps. That way you only have to tighten two straps when you put it on.
Some masks are definitely slower that way. I have an israeli 4a1 mask and it's much faster to synch the straps than fumble with the "hooks" that arent designed for quick attaching and detaching
I’m just getting one because I think a war will happen in like 2027 or something.
Right now a civil war of sorts...
@empbac the night is young. Until a proper vaccine...anything is possible..
So create a list: gas mask, cartridges, gear, kevlar, copper fit gloves, tac sunglasses etc.
If chemical warfare were to really happen a gas mask won't save you for shit. Most gasses used today are lethal when in contact with the skin. You would have to wear a full body cbrn suit to survive a chemical attack in this day and age and putting one of those can take hours plus professional expertise since one small hole can kill you. CS gas from police use and fallout particles from nuclear warfare are the the only protection you'll get from a gas mask however if you are in the later case there are way worst things that you'll have to worry about. Radiation will be high and fallout will get stuck in your skin. You'll have to take a shower within minutes of being outside. At that point you are better inside your house, there you will be protected by all the problems that could come from nuclear warfare besides the initial fire blast but literally nothing can save you from that. In the case of CS use from the police then you can just get a good quality particle filter and you'll be far more comfortable than a gas mask.
empbac You think too much. Relax my man, your job is to vote and stay up to date with current events that affect you and your loved ones. It doesn’t hurt to be prepared, but don’t let it become a lifestyle. That’s a surefire route to stress and sadness. If the protest affects you you’re welcome to join and be a part of change, if not you can rest and wait until your voice is needed for the next part of progress. A lot of people stress the extremes of the protests, I’ve been there firsthand, it’s a lot of genuinely good people with concerns and ideas looking to change some aspects of our country and cities. My point is: don’t allow yourself to become polarized. This is the *United* States. That first word is valuable.
@@Fcreveryoung well said, bud.
Really enjoyed this video. I was planning to purchase a couple in the next week or two so the timing was perfect!
Thanks for sharing and your dedication and hard work. Living on the Mid Atlantic coastline, I’m smack dab in the middle of two major attack zones. A few hours south of DC and a few hours north of the Navy’s home base for the Atlantic Fleet. I will be checking out your Amazon account. Happy Prepping All!!
🇺🇸💪🇺🇸
That was pretty impressive. I’ve never seen anybody get a seal on a gas mask while sporting a beard.As a matter fact, I didn’t think it was even possible.
Its possible, but its harder/little bit risky so why risk it?
Get a small "tub" of Vaseline. And coat your beard liberally prior to donning the mask, it should help to maintain a seal even with abundant facial hair. Not the best solution, but beats trying to shave while holding your breath.
@@TurboGuru : Let’s hope that the bearded person toting the extra tub of Vaseline in his kit, is provided with the courtesy of a little extra notice that he will be needing to wear the mask in the near future, so he has time to lube his beard sufficiently before having to don the mask.
OSHA actually prohibits any facial hair between the face and the sealing surface. From 1910.134, App. A: "The test shall not be conducted if there is any hair growth between the skin and the facepiece sealing surface, such as stubble beard growth, beard, mustache or sideburns which cross the respirator sealing surface. Any type of apparel which interferes with a satisfactory fit shall be altered or removed."
It depends where your facial hair is. Hitler was a soldier once, which is why he had a silly moustache
Who’s here from the Coronavirus
Here from Toronto outbreak
No one you’re the only one.
*coughs in agreement*
im more scared of the gvmt "protecting" me from it then the virus itself
@MrMoo 100% Agree!
Watching this so that I'll be sure on what to buy before the plague starts.
I have some of those Israeli filters I'm a bit skeptical from using it in an emergency but good to know you explained it. Thanks for that 👍
Who’s here in 2020 wanting a gas mask for back to school
Today in school i was like ima buy a gas mask
To be fair they been doing that in Israel for decades. Lol
The one-piece screen has its advantages over the double round style. However, lining up the sights on a rifle isn't one of them.
Absolutely is on the C50, FM53 and 54.
another issue is usually that it creates leaks quicker than double eyepiece visors. it's mainly because of the different materials, the more sturdy plastic visor does not flex as well as the rubber mask does, the larger the inflexible bit is, the higher the chance of failure around its edges. so for survivability, a double eyepiece is preferable, for simple emergency use though, something like the Draeger Nova will be a lot more comfortable to use for most people. it's always a matter of what you want from it.
you are inexperienced with gasmasks and need something to save your ass in an SHTF scenario: go with a fishbowl (the one-piece visor masks)
you understand the basics of gasmask use and want something that won't fail you at any point? go with a normal binocular mask.
@@yowtfputthemaskbackon9202 I can fold my FM53 lens in half
@@poolee77 I would not recommend it. even if it is flexible, the rubber in most masks is more flexible, and that difference creates stress on the parts where it is connected and can create leaks.
I’m buying them cause I’m a collector. Unlike preppers, my collection of NBC suits and gas masks consists almost exclusively of soviet designs. I find them interesting, and the SHMS is still an incredibly viable mask.
youre lucky nukes are coming soon.
the M40A1, We used those in Gulf 1. I've used those Israeli gas masks too. they are very good, provided you have the right size.
I ended up getting two of the m40s because it was the only mask I could find spectacle inserts for on the surplus market that didnt cost $300. That and it seems like you can find parts for them very easily as I always like to keep spare valves and harnesses in case one breaks when the internet is down and I can't order more.
Not sure where the part about "Don't WASTE Your Money" was?
Yea Im wondering that too. This was click bait
He's showed you budget option and told you what it can offer compared to the rather expensive 100+ dollar mask. If you don't expect to be getting heavy use out of it, you don't want to be paying an exorbitant amount of money for something you you're only gonna get about $20 worth of use out of.
The Avon m50 masks is extremely expensive. Over $300
I bought a 3M mask for almost 100$ and I can tell you, that it is waay worse than those.
It doesn't have this 40mm NATO fitting, there is no valve in the holes for the filters that would close it if there is no filter, so if you take one off, you breath the external air, there is no second layer of glass, they have some propertiary fittings for filters, there is no special bag for it.
It all depends on the filter model.
My filter is model 6059 which is ABEK1 certified. Basically, good enough to escape in time.
Those Mira filters are ABEK class 2, so they are better.
Don't know what class have the 30 year old military filters.
The M40 was used from the 90’s till recently and replaced by the M50, and before that the M17. Your MCU-2P was only used by the USAF/USN.
M17, M17A1 & M17A2.
Great information
Good video dude this is the first time I’ve ever seen this channel.
Thank you for the informative video!
I live in Portland, while I've never participated in any of the "peaceful protests" one day while walking through downtown I got a huge whif of tear gas and was reminded that it's in my best interest to carry one in my car.
Living that close to a nuclear power plant is lucky. You might spontaneously develop mutant super powers!
Yeah man i love living in Chernobyl!
*Written with my 3rd arm*
Thare is no leaky plant anywhere and if there was you'd probably die in the span of a month
Martin Mcbryan r/wooosh
@@Martin-rb9ud do you not know what sarcasm is
Or... Or cancer
Nice video. I have a few masks. The one I like the most is the fm12. It's been very useful these days!
It's not just charcoal. it's _activated_ charcoal, which adsorbs anything and everything. It 100% has a shelf life and a very short one at that. if not vacuum sealed, it can last maybe a year.
Just be careful with old gasmasks and filters because some of the filters have asbestos in them.
The GP-5 or any Russian ones from the Soviet era. You should never ever use those filters
Hands up if you're sweating about the 2019-nCoV rn
Xenos Zeta I’m buying a gas mask coronavirus is gonna get us all
✋
Just realised that my country downplay it damn fuck the savings account and even if it fails by failling pandemic ayy still have some awesome gear and that still a win in my book
steve jones 34k official infected and they screamed about test kits for a mobth but what ever
@@catfan__ Covid 2019 has a calculated lethality of 18.87% using L = dead / (dead + recovered) before the Chinese stopped testing for it using RNA test kits, when the infected count was 45.182. Now the calculation is about 16+% with R0 of 4.7 to 6.6 . See danielsimms.wordpress.com for references.
This is an awesome and informative video. Thank you sir!
THank you for your service
I’m fairly confident the last mask you showed was a German military Dräger M65 mask and not an Israeli civilian mask
Pretty newbie gas mask 101. A lot of important info was missed. I’ll save you some time. You don’t need an expensive high end mask. As long as the mask is comfortable, seals, has an oral nasal cup (to prevent digging) and a non asbestos containing filter, you’re good to go. My recommendation: buy a 90s gas mask and use a 40mm thread NATO filter. Stay away from old Soviet filters as they’re sketchy and most have asbestos in them.
Fogging not digging* and also get a mask that has a voice diaphragm if you want to be heard by others intelligibly.
I just took mine from the ships ive worked on every contract. All worked fine when the ashfall from the volcano fell. Didnt spend sht and served me very well
The MCU2 is fine. But the visor yellows after a few years with no real way of reversing the deterioration
What about those sheets (usually 100-500mm plastic) that folk use to blacken out the visual for anyone trying to looking through glass panes, the two-way mirror effect, basically?
You wipe the window with soapy water and smooth the sheet atop it and it sticks.
You can see out, but they can't see in.
I've seen them on _Aliexpress,_ _Wish,_ etc and I'm not 100% certain, but some may offer UVA & UVB protection, saving both your health and the longevity of the visor and all for a couple of bucks.
Just an idea...
I am a collector, and I know there is so much trashy information, and scare tactics especially in the prepper gas mask community. But this is all 100% true like there was nothing wrong that I could see with this video. I’m not an expert but this is a great video to get started with learning about gas masks. It seems like you actually care about helping people, and it’s great. I am more on the collectors side, and less prepping but I am worried about an industrial disaster, and stuff like that.
Only thing I would critique is you are supposed to exhale first to get rid of any gas/agent that might have been trapped by the mask when donning, not inhale.
Ive been wondering and considering gas masks. The thought crossed my mind when a friend recommended AT LEAST an air filter from home depot. So i got one. And a few of the face covers. But a gas mask seems worlds better. I can share the others.
it depends on what you want it for, and also where you are from.
generally, the best you can do is to get locally made gasmasks, since different nationalities have slightly different face types.
if you are German, get an M65Z or a Draeger Nova
if you are British, get an Avon Mask, of any type, they are all decent.
if you are from eastern Europe, the Polish MP 5 should be considered.
If you are American, go either with the current military ones or if you know your ancestry, go with what would fit them best.
etc etc
the next step is to understand what visor you want.
you have a choice between reliability and comfortability.
fishbowl masks, or the ones with a single large visor, are less reliable, more prone to failure, however, they work much better for people who are uncomfortable with cramped spaces, and are also much more child friendly.
binocular masks, the ones with two eyepieces, are much more reliable, easier maintenance-wise, but come with the downside of being much less comfortable for inexperienced people. the idea of less visibility is a lie, you can see enough with both types. one just feels a lot more cramped than the other.
then, comes the important bit, the filter.
if you get a mask for smoke and fire protection, you would want a smoke-rated filter.
if you want one as a prepper, get an NBC or ABC filter (both mean the same. "Nuclear-Biological-Chemical" and "Atomar-Biologisch-Chemisch" the other is just german.)
if you just get one for work, dust filters are the way to go and also the cheapest.
now to some other points.
- strapped or helmet mask? straps are easier to replace and adjust, helmet masks make a better seal.
- Voice diaphram or no Voice diaphram? it makes communication easier, but for a civilian, it really only introduces another point of failure.
- Rectangular or Circular Binoculars? Rectangular. shut up avon nerds.
- drinking tube or no drinking tube? anyone that has ever worn them for any considerable amount of time can agree, no drinking tube, it's an unnecessary annoyance
constantly poking around your mouth. you're not supposed to spend days on end in a fucking gas cloud, so you won't need one.
to put it in the words of a man from 4chan "stop shitposting and get out of the fucking gas chamber" (and then drink something like a normal person)
Nice work mate.
Thanks for the video, by the way!
No problem, I'v been meaning to make this one for a few years and finally got around to it lol
My purchase is due to living near a Military Depot that stores and destroys military gases.. But due to current events, I think having one might be a good idea..
The M40A1 offers better protection than your mcu-2 because it has the butyl second skin for protection against certain blister agents that would eat through the silicon of the mcu-2
The mcu 2 comes with a second skin that fixes this exact problem, but turns out their pretty scarce now
Good vid you deserve more subs!
I’ve got my self a small collection of masks mainly because I think they look neat, so far I have a Finnish M/61, an MCU-2/P, an M40A1, and a Czech OM-90 and I have the proper carriers for all of these mask so they can get stored properly and I take them out every month or so and give them a cleaning and do seal checks on them.
He is right I have a gasmask that is around 60 years old and it still holds a seal
Would not wear it because of asbestos fibers in the filter
@@PANTERA_FAN333 If you are in a situation in which you can choose between inhaling phosgene or asbestos then I would certainly choose asbestos but I agree getting a filter without asbestos is definitely a wise idea.
the m40a1 is what the us army used when i was in
neat video for this season of nCOV.
Thanks!
Your practicing putting the mask on with the filter already attached but that's not how you will have it stored correct? In order for the filter to maintain its shelf life it would have to be unopened I assume.
*Spartan Greywolf*
👆👏👏👏👍
Wrong if the filter isn't on you will die
If I add one to my preps, it will be due to tear gas use during rioting, which has happened right outside my apartment, or for wildfires and filtering out smoke particulates. No nuclear stations anywhere near me, all coal.
Tear gas is a great example I forgot to mention!
Do not count on a gas mask to save your life during a fire, the inferno will eat up the surrounding oxygen the gas mask will filter out some of the particles sure but if there is no air left to breathe you will slowly suffocate. A small oxygen tank will serve much better for that situation and eliminates the concerns of smoke. This is why firefighters used closed respirators with oxygen tanks.
@@johndunaj3286 for structural firefighting yes , wildland no because they are cumbersome for us to lug into the woods along with our line packs and tools, and with wildland 9/10 we're walking to the fire so we don't bring SCBA useless we're assigned to an engine to do structure protection/ firefighting operations and even then alot of times during a wildfire dependent on where the department is in the country California for example CalFire has SCBAs in their trucks but they almost never bring them out of the truck because we can't do interior attack with our wildland green and yellows
This is gonna make grocery shopping fun
Good content and presentation. Great ethos. Speaker comes across as genuine, credible, and knowledgeable. I'll be back.
COVID-19 brought me here.
JP K you’re looking for a rebreather
Same
Riots got me here
Cringe
I should redirect you to the 9-95 normal masks then because covid isnt dangerous enough.
QQ: The Amazon link seems to just land on a general query response - but not to any specific model/s you covered in your video - any recommended sellers for the MCU-2 or M40-A1 (I think that's what you said)? Thanks!
Honestly, the Polish surplus MC-1 has worked for me with a new modern filter.
Paper and activated charcol. This is made with crushed hardwood charcol mixed with lemon juice or other mildly acidic liquid, left for 24-48 hours, strained then baked dry. Paint spayers masks also work fine for nukclear fallout as long as you cover your skin too, it is particulat matter, dust in essance.
A very informative video however as you well know and you did mention the fact that the Israeli mask was a small. Please elaborate in another video how to determine the size of mask you need. I know on my dog tags we have our mask size listed for convenience. Also one must be clean shaven to really obtain a tight seal. A bit of WWII trivia, you know why Hitler had that paintbrush mustache? During WWI he was injured by a gas attack and his mask did not fit because of his large handlebar mustache thus the infamous paintbrush.
I have seen some of the newer 3M full face masks for agricultural use however they are using a proprietary twist lock filter. It would be interesting if anyone knows of an adapter that would allow for the use of NATO filters.
As mentioned in the comments below, people should know that a Gas mask will NOT protect them in an oxygen depleted atmosphere, instant suffocation.
I recommend the MIRA SAFETY CM-6 or CM-7
MIRA sells surplus masks at a huge mark up. The CM-7M is actually a Czech OM-90 gas mask which is essentially an AVON S10 copy. You can find these masks at a more affordable pricec than what MIRA sells them for if you look around. Also in regards to the expiration for filters stated in the video. Yes the filters are paper HEPA filters with activated charcoal. These can in fact expire- as in the chemicals that the filter is treated with will decay over time and become less effective at filtration. That's not to say that expired filters won't work.. They just wont work as well as they would if they were in date.
Generic_Brand but it is cbrn protective and the filter could last 20 years
@@unnoticed6802 filters can be found cheaper than their high price, freshly made that would last just as long. Theyre just ABEK filters. if you put an ABEK filter on an israeli m15 or one of the israeli civilian masks, it will be just as protective as the CM-7M/ Czech OM-90. for far cheaper than the MIRA price point.
Mira is a scam
The port in the middle is NOT for voice "amplification", there is a rubber flap that helps you exhale and not fog the crap up and seals up. The matching holes on both sides are where you will determine which side to install the filter. Why is this important? Because if you are a right handed shooter and have the filter installed on the right side, it WILL interfere with aiming a rifle. In basic training, we swapped the filter to our off-hand side and replaced the cap seal on the shooting side.
this is my 2020 shopping supplies
8:45 that’s a West German m65 the Israeli m15 is very similar though
good old german Draeger mask
I live about 20 miles away from a plant and would LOVE a video as to what you have for a bug in situation. I have a room that is underground and cement block with a sistern that I've been wanting to convert to a fallout shelter. We are at the outside of the 3rd ring on the maps I've seen of the affected area but am on the top of a hill. I worry about twist fact as to how more vulnerable this makes to a fallout situation, the ant is in a valley. All answers appreciated. Thank you and God bless. WWG1WGA
which kind of plant? which toxic? any railway fret ???
Just make sure to know gas masks cant protect you from radiation, if the rubber is good maybe from 1 type of radiation but DEFINITLY not gamma radiation
The first thing taught in NBC/CBRN training is you must be clean shaven for your respirator to form a proper seal.
I’m actually just prepping for the next fuel center spill I have to clean up at work. I get sick for a month or two after a spill and I’m tired of dealing with it.
Die 3. Schutzmaske ist ein Deutsche Gasmaske der Frima Dräger oder Auer (MSA) M65z
@bLackstar ein bisschen
I went with a 3M full face respirator recently, I have an NBC suit and an Israeli mask but the 40mm filters are prohibitively expensive if you're trying to prep to last for any serious length of time... for biological threats like a pandemic P100 HEPA filters will do and they're a fraction of the cost of 40mm filters. They also take up much less volume and weight. The gas mask is for NBC bug out, the respirator and filters (I got 144 for less than $200) are for bug in
I wanted one for airsoft and I thought this would help. It helped in another way
I have a ShMS Gasmask. Its a Decent gasmask. And is pretty good Choice when you want to use Optics.
Man i got here looking for a mask to protect against Coronavirus 🤷🏻♂️
You don't need a gas mask to protect you against the coronavirus, just an N91 mask of some sort with a respirator style being the best.
Dont listen to that other guy who commented. You definitely do need something hefty and comprehensive.
@Riceball01 ,
N95 and above.
Unless you are just checking for initial fit you skipped over a very important step. If you check the negative pressure in the mask before clearing it with positive pressure you just killed yourself.
Could you elaborate, please?
I'm a rank newbie to this subject.
Exhale first into the mask, then do the negativ pressure test. Else you just inhale all the bad stuff if it wasn't sealed.
In Serbia, they sell M2 gas masks for 1$ at millitary surplus, and 3-10$ on internet. 40mm
cool thing is Israeli gas masks can also use Warsaw Pact/Russian/Polish filters due to being standardized threaded although older Warsaw Pact filters have risk of asbestos
2019-nCoV anyone?
never know how dangerous corona can get
I wearing M90 millitary grade biological warfare gas masks during shopping...the teller said...woww..cool!
I’m a proud owner of both a GP-5 and a Serbian M1. I would recommend the GP-5, however get a Polish FP-5 or modern Russian filter, as the original filter contains Asbestos.
Here's a tip. Not foolproof but in my own tests worked great. Take the rubber gasket from the cap of an FP5 filter (or other filter like the Israeli ones) and put it into the filter port of the GP5. This lets normal 40mm NATO filters get a better seal, as they don't need to screw in as far and they meet the rubber of the gasket that way and it provides a good seal. Not sure I would want it standing between me and VX lol but in a pinch for a prepper, it would be very effective.
These are both useless, they will NOT protect you. The FP5 is 40mm NATO not GOST.
Thank you for the info you explained it well and i learned a lot about Gas Mask.Planning to buy cheaper one for Nuclear Prepper just incase of something happen this year.😊
I picked up 3 of the 3M full face masks from a family member who got a bulk purchase on sale. I keep one in my work bag, one stays at the ready in the house just in case my house is raided by a group of uninvited people that have training. ....LEO's ain't the only ones out here practicing breaching & room clearing
Shame those MCU-2 Masks fall apart when exposed to blister agents.
You just have to get a butyl second skin
I’ve contracted the virus and I’m in week 1-1/2 so far after diagnosis and I’m already feeling back to normal. Just felt like the normal flu and maybe a bit more mild bronchitis. That’s it.
The media is blowing it out of proportion. People are just scared of what they don’t know.
Want to ask, did you have any chest pains?
I did, but it felt just as if it was bronchitis, nothing too severe
All of Western msn is owned by just *six* Corporations!
Says a lot...
How are you now? Hope you didn’t get the jab it’s horrible crime against humanity
@@tylerpowers9573there’s no point getting it if u already got the virus ur body already created it’s own immune system
I love the M-40 A1
I'm going to get one because this 2020 Corona virus I feel like it will get worst and the apocalypse is near. Thankyou for the info friend.
Seeing as you know about CBRNE you should inform your viewers if they get into a CBRNE environment a mask alone will not protect them. And depending upon what kind of environment they are in what will that gas mask alone save them from? if these people encounter and Ethyl Methyl badshit spill is their mask alone going to save them? And also how long that filter will last in certain chemicals is it for oil-based contaminants ? And they should perhaps read up on Decon
Yeah, a mask alone won't protect you in all situations. This can be a real deep rabbit whole to go down.
@@bugoutbrothers get in your vehicle and drive into the wind that's where the fresh air will be
The Gasmask you showed at *8:46* thats a German Bundeswehr Gasmask, not a Israelien One, I got one of them at Home. ^^
Fuck ISR
I got one at home too and I thought is some WTO gas mask, at least that's what Ive found.My mask is a dark green
Just ordered one the ones in the US are overpriced.
German Drager M65
It either a Drager M65 or a Romanian M74, i think its an M74 because of the voice diaphragm.
i want one cause it looks cool.
I am prepping for my Highschool chemistry class. I have a GP-5 and SM-74, the GP-5 for the memes the SM-74 for the functionality
Just remember that soviet filters have asbestos
Its a dräger civilean gasmask
# made in Germany 🇩🇪
I have a couple of full face respirators and a bunch of half face respirators, mostly concerned with public order or riot control agents although just now it's more the abekp3 or N99 to prevent virus and other particulates which includes riot control agents 😏
I use BW M65 with new Nato RD40 filters, just perfect for being ready in short time
I'm looking for some to buy for me and my family, along with a bunch of others prepping stuff. Because I'm getting increasingly paranoid with the situation in the world right now
Who's coming here because of the Corona virus
Which mask should I buy on Amazon??? I’m here bc of Corona
Everyone is here cuz corona
Martin Hromočuk except for the 100 comments written 11 months ago.
av3maria buy the Israeli civilian gas mask and some 40mm NATO filters
SS SHULTZ thank you.
@@dandesso8926 good is cm-6 Czech gas mask with 40mm and NATO filters
i want one cause they look cool
I ordered a CBRN mask and filters that filter out EVERYTHING....they were not cheap. But, I got premium stuff on the way. Some things you can't cut corners on.
Buying a gas mask for BDSM. That airflow restriction!
Breathplay!
11:06 WW3
Corona Virus now
Thank You