FOR HATS AND SWAG GO HERE!----->www.jpaydirt.com/ OLD KENNY COLORING BOOKS------> amazon.com/Old-Kenny-Semi-Truck-Coloring-Book/dp/1724398199/ref=sr_1_1?ie=UTF8&qid=1533523771&sr=8-1&keywords=old+kenny+coloring+book JPAYDIRT ON INSTAGRAM------->instagram.com/jpaydirt/ JPAYDIRT ON FACEBOOK------>facebook.com/Jpaydirt/ MY AWESOME TOOLBOXES--------->toolcrownusa.com/ HELP A VETERAN, SHANE PERSONS C/O ruclips.net/video/iHeH5cl7JGo/видео.html ANDERSON CONSTRUCTION 858 WEST 100 SOUTH BLACKFOOT ID 83221
I got a 2002 second gen 3500 and I'll never get a new or newer one to replace it with all the electronics that I can't fix. I figure it the same as you do, with that kind of money that 2002 can be almost new every few years as long as I can get parts. Besides we pay personal property tax every year according to book value and sixty to seventy thousand verses 8 thousand, I rather keep my money than some politician having it in his pocket.
Jeff, good luck with those Napa Starters, or any rebuilt item from Napa. Personally I use only Cummins parts on the engine. You will grow old changing out anybodies "Rebuilt" anything these days. Sorry for the rant. Been there done that.
Wish they were $60 grand here ! By the time they get here ( Australia ) converted to RH drive then lumped with a big tax they come out at about $120,000 ! That’s not a typo 😫
Sure it is lifetime warranty but by the time you crawl under there and put on #7 in a few years you will be tired of it and buy a good one. When was the last time you ran the overhead on the super dodge? Yours started like it was 0 outside in this video. Maybe it was? My Crew cab will start no grids no problem down to 0. Maybe time for an injector refresh too if it has a lot of miles. They normally start and and don't even shake down to about 20 or so.
I know this video was a while ago, so I don't think I'll get a response quickly, but I have been having starting issues with my 2005 Dodge 3500 Ram (diesel) On warm days it starts fine, Cold days I had to plug in the oil pan heater to get it to start. I replaced my two Solenoids which go to the air intake heater, thinking that might be the issue. Today, with oil pan heater plugged in overnight, I couldn't get the Truck to start. So... I was getting ready to purchase the Air Intake heater thinking maybe it had failed. (It may be my issue) Some say >they really never go bad." Then I came across a video about a "fuel heater Element". I'm NOT a mechanic, but I can wrench just about anything. The fact that it starts on warm days, and not on cold ones, makes me think it's the intake heater element, BUT, could it be the fuel heater element instead? IDK.... any thoughts before I purchase the air intake heater?
thanks for the video you really helped me out. I gotta 95 ram and it doesnt want to start under 30 degrees. Found out those solendoids weren't plugged in. I wouldn't have even known what those things were called or what they even did lol.
How many miles on your Cummins Jpaydirt? I've got about 205K on my 98.5 3500, I had the auto trans rebuilt about 20K ago now the head gasket has got weak and the VP44 is sending its death code :( have a good day man
You'll love tarryal fixes all Jeff hes a really cool cat. Maybe I could go on that old white board again. Wish there was a way to put pictures on here. Got 2 cute little cat 302D excavator on and a little cat roller. I think a shovel would be more useful. Hydro lag biggggggggg time
The white board; hearts and smiles back at ya ... looks like Olivia and KACEI (with a five line E ... no, that's a double E) have better hand writing than I do. FYI: that is most likely Cordova AK. a little town with lots of colorful and off color history. At one time there was a road to Cordova, McCarthy Hwy, but was lost in the 64 earthquake. Another town you may enjoy is Homer, it usta be known as "A quaint little drinking town with a fishing problem." To give you a size comparison the State of West Virginia is one thousand square miles smaller than the Mat-Su (Matanuska-Susitna) borough and if you placed Alaska over the East coast it would cover 22 States and span the contiguous States. Alaska has five times the coastal maritime limits and boundaries than the entire U.S. coast line combined. Alaska does not use the maritime limits and boundaries as part of its land mass but Texas does. Taking that fact into account Alaska is actually three times the state of Texas. You could truly place Texas between Fairbanks and Nome and if they kept their mouth shut we wouldn't even know there were there; but, as we all know that's impossible for Texans to keep their mouth shut.
🤩 AWESOME REPORT JEFF 🥃 Yes SIR "THEM THAR LIFETIME PARTS" are [AWESOME AWESOME] 🥃🥃 (worse problem ) }JUSTIFY JUSTIFY { 🤑🤑 to get the replacement 🤓 FREE 🤪 always mark my replacements with date !!!! THANKS AGAIN JEFF 😍😍😍😍😍🤙🙏 ps Quite a mechanic ( Taryl ) 🥴🤪😜
You are regular entertainment! Keep them coming. You could have Ohmed the coils without having to remove everything. Just remove the Wires and Ohm them. I'm getting older too and using my head more than my back now because I'm getting tired ..... and lazy. Don't sell the Super Dodge.
THANKS! I thank you Jeff for your kind comments. Sorry, I thought the putty had instructions on the package. It is like JB Weld but much easier to use. They each have their own niche applications. Just clean material and cut off as much putty as you'll need, kneed until it is a consistent color and apply - it covers and plugs a multitude of sins. Taryl is off putting at first but the information he gives out is on the mark and I find his humor dry with a hint of barley. I don't even see his costume anymore, I think he uses it as a hook to catch the younger crowd and teach them how to. Yeah when I was young, I usta watch Batman on TV too.
In the Navy we called getting zapped. Other air squadrons would put squadron stickers on our planes, and or spaces. We'd do the same thing as it is like pissing on a fire hydrant marking our territory. So the filthy ho marking would be the same.
Hey Jeff good to see you guys doing ok. Don't worry your not the only one bored to tears. Have been casting some lead bullets for my 44/357 handguns to stay busy but now out of lead. Two 5gal buckets of wheel weights didn't go as far as i hoped. Stay safe and hug the Misses
I have watched Taryl Fixes All off and on for several years and when you check out his channel you will understand when I tell you, Taryl reminds me of you in some ways, ha, ha ha. Keep this great channel going, Nick, North West Farmer P.S. Taryl really does fix darn near everything in the small engine equipment area. Have learned lots from him!
I have a 93 dodge diesel. ,204000 miles new starter, new pulling trans[better than dodge equip new heater cour 2nd set of brakes new ball joints always started every day in Wisconsinwinters Barry Beggs Beloit, wisconsin for white board
Had a company wide conference call this morning.We got the word that we won't be going back to work till after September.The photo from Vegas was 2002 that was the first one my wife and I attended.Komatsu had a photo opp for visitors in the excavator bucket.Possibly walked right past each other.Didn't know if RUclips was even on the internet back then.
They say "Idle hands do the devil's work". And bored JPaydirt must be up to something. How about a change of color? Work on something purple before you go plum crazy.
Nicely done, my grid heater issue was no ground was never a starter issue in Washington state and now in Arizona well 109 today really didn't need it lol retired now so might end up in a cold place and need it , I have a 2001 5.9 diesel and love it.
For the rest of you guys that don't want to change the starter you can get heavy duty contacts for your solenoid. I've had them in mine for years, and you can replace them without removing the starter. They are made by LarryB and you can find them on Amazon, eBay and other truck parts places. www.amazon.com/dp/B00D2C1URK/ref=cm_sw_r_apa_i_V6MSEb7AXYDZE
that is the best way to fix them starters seemed like i needed a new starter every year until upgraded them contacts you can buy the originals at genos garage for $19.95 www.genosgarage.com/product/lb-r90ss/engine-rebuild-kits-3
FOR HATS AND SWAG GO HERE!----->www.jpaydirt.com/
OLD KENNY COLORING BOOKS------> amazon.com/Old-Kenny-Semi-Truck-Coloring-Book/dp/1724398199/ref=sr_1_1?ie=UTF8&qid=1533523771&sr=8-1&keywords=old+kenny+coloring+book
JPAYDIRT ON INSTAGRAM------->instagram.com/jpaydirt/
JPAYDIRT ON FACEBOOK------>facebook.com/Jpaydirt/
MY AWESOME TOOLBOXES--------->toolcrownusa.com/
HELP A VETERAN, SHANE PERSONS C/O ruclips.net/video/iHeH5cl7JGo/видео.html
ANDERSON CONSTRUCTION
858 WEST 100 SOUTH
BLACKFOOT ID 83221
Don’t ever stop fixing that Dodge. My late friend Jimmy had one and he loved it. If you sell it you’ll kick yourself. Fer realz.
Great video and info. Jeff I wonder if this 12 valve would be a good candidate for a Switchblade turbo?? I would love to see this project.
I'd love to see the before and after performance of that swap. Great idea
I got a 2002 second gen 3500 and I'll never get a new or newer one to replace it with all the electronics that I can't fix. I figure it the same as you do, with that kind of money that 2002 can be almost new every few years as long as I can get parts. Besides we pay personal property tax every year according to book value and sixty to seventy thousand verses 8 thousand, I rather keep my money than some politician having it in his pocket.
Jeff, good luck with those Napa Starters, or any rebuilt item from Napa. Personally I use only Cummins parts on the engine. You will grow old changing out anybodies "Rebuilt" anything these days. Sorry for the rant. Been there done that.
Wish they were $60 grand here ! By the time they get here ( Australia ) converted to RH drive then lumped with a big tax they come out at about $120,000 ! That’s not a typo 😫
You're welcome, I sent the tip cleaners.
One of my Dodge truck's had that heater block catch fire so I just unhooked them and the trucks always seem to start even in our cold winters.
Doin the dead heater thing Winter in Wyoming. Either that or get and extension cord and a hair dryer. 96 12V
I got you beat on the miles my 96 has 471000 miles on it
Try $80.000
Sure it is lifetime warranty but by the time you crawl under there and put on #7 in a few years you will be tired of it and buy a good one. When was the last time you ran the overhead on the super dodge? Yours started like it was 0 outside in this video. Maybe it was? My Crew cab will start no grids no problem down to 0. Maybe time for an injector refresh too if it has a lot of miles. They normally start and and don't even shake down to about 20 or so.
The same contacts in the starter went bad on my 2nd gen, I went to a small shop that rebuilds starters got new contacts for 30 bucks problem solved.
I remember that show I think it was the red and green show or something.
The Red Green Show. Yeah, me, too.
I know this video was a while ago, so I don't think I'll get a response quickly, but I have been having starting issues with my 2005 Dodge 3500 Ram (diesel) On warm days it starts fine, Cold days I had to plug in the oil pan heater to get it to start. I replaced my two Solenoids which go to the air intake heater, thinking that might be the issue. Today, with oil pan heater plugged in overnight, I couldn't get the Truck to start. So... I was getting ready to purchase the Air Intake heater thinking maybe it had failed. (It may be my issue) Some say >they really never go bad." Then I came across a video about a "fuel heater Element". I'm NOT a mechanic, but I can wrench just about anything. The fact that it starts on warm days, and not on cold ones, makes me think it's the intake heater element, BUT, could it be the fuel heater element instead? IDK.... any thoughts before I purchase the air intake heater?
thanks for the video you really helped me out. I gotta 95 ram and it doesnt want to start under 30 degrees. Found out those solendoids weren't plugged in. I wouldn't have even known what those things were called or what they even did lol.
How many miles on your Cummins Jpaydirt? I've got about 205K on my 98.5 3500, I had the auto trans rebuilt about 20K ago now the head gasket has got weak and the VP44 is sending its death code :( have a good day man
You'll love tarryal fixes all Jeff hes a really cool cat. Maybe I could go on that old white board again. Wish there was a way to put pictures on here. Got 2 cute little cat 302D excavator on and a little cat roller. I think a shovel would be more useful. Hydro lag biggggggggg time
The white board; hearts and smiles back at ya ... looks like Olivia and KACEI (with a five line E ... no, that's a double E) have better hand writing than I do.
FYI: that is most likely Cordova AK. a little town with lots of colorful and off color history. At one time there was a road to Cordova, McCarthy Hwy, but was lost in the 64 earthquake. Another town you may enjoy is Homer, it usta be known as "A quaint little drinking town with a fishing problem." To give you a size comparison the State of West Virginia is one thousand square miles smaller than the Mat-Su (Matanuska-Susitna) borough and if you placed Alaska over the East coast it would cover 22 States and span the contiguous States. Alaska has five times the coastal maritime limits and boundaries than the entire U.S. coast line combined. Alaska does not use the maritime limits and boundaries as part of its land mass but Texas does. Taking that fact into account Alaska is actually three times the state of Texas. You could truly place Texas between Fairbanks and Nome and if they kept their mouth shut we wouldn't even know there were there; but, as we all know that's impossible for Texans to keep their mouth shut.
🤩 AWESOME REPORT JEFF 🥃 Yes SIR "THEM THAR LIFETIME PARTS" are [AWESOME AWESOME] 🥃🥃 (worse problem ) }JUSTIFY JUSTIFY { 🤑🤑 to get the replacement 🤓 FREE 🤪 always mark my replacements with date !!!! THANKS AGAIN JEFF 😍😍😍😍😍🤙🙏
ps Quite a mechanic ( Taryl ) 🥴🤪😜
You are regular entertainment! Keep them coming. You could have Ohmed the coils without having to remove everything. Just remove the Wires and Ohm them. I'm getting older too and using my head more than my back now because I'm getting tired ..... and lazy. Don't sell the Super Dodge.
THANKS!
I thank you Jeff for your kind comments. Sorry, I thought the putty had instructions on the package. It is like JB Weld but much easier to use. They each have their own niche applications. Just clean material and cut off as much putty as you'll need, kneed until it is a consistent color and apply - it covers and plugs a multitude of sins.
Taryl is off putting at first but the information he gives out is on the mark and I find his humor dry with a hint of barley. I don't even see his costume anymore, I think he uses it as a hook to catch the younger crowd and teach them how to. Yeah when I was young, I usta watch Batman on TV too.
In the Navy we called getting zapped. Other air squadrons would put squadron stickers on our planes, and or spaces. We'd do the same thing as it is like pissing on a fire hydrant marking our territory.
So the filthy ho marking would be the same.
Hey Jeff good to see you guys doing ok. Don't worry your not the only one bored to tears. Have been casting some lead bullets for my 44/357 handguns to stay busy but now out of lead. Two 5gal buckets of wheel weights didn't go as far as i hoped. Stay safe and hug the Misses
I have watched Taryl Fixes All off and on for several years and when you check out his channel you will understand when I tell you, Taryl reminds me of you in some ways, ha, ha ha. Keep this great channel going, Nick, North West Farmer P.S. Taryl really does fix darn near everything in the small engine equipment area. Have learned lots from him!
We cant have super dodge lame boss Man!! Love it shes still ready to Rawwwer and let the smoke roll!! 👍🏽👍🏽🇺🇲🇺🇲
I have a 93 dodge diesel. ,204000 miles new starter, new pulling trans[better than dodge equip new heater cour 2nd set of brakes new ball joints always started every day in Wisconsinwinters Barry Beggs Beloit, wisconsin for white board
Had a company wide conference call this morning.We got the word that we won't be going back to work till after September.The photo from Vegas was 2002 that was the first one my wife and I attended.Komatsu had a photo opp for visitors in the excavator bucket.Possibly walked right past each other.Didn't know if RUclips was even on the internet back then.
They say "Idle hands do the devil's work". And bored JPaydirt must be up to something. How about a change of color? Work on something purple before you go plum crazy.
My problem with lifetime warranty parts, is they never come and change em out when they die, and die they always do. 5 yrs is better then average...
you need to throw some crap around. How do you find anything with all that clean in the way. looks like my wife got loose fixing your shop.
Yes. F--- chy-na!! For all our sakes I pray we get back to reality soon. That white board looks to be making some really great times!
My grid heater relay went to shit and stuck on and melted the post on the main battery.. stay safe and keep on trucking brother.
Nicely done, my grid heater issue was no ground was never a starter issue in Washington state and now in Arizona well 109 today really didn't need it lol retired now so might end up in a cold place and need it , I have a 2001 5.9 diesel and love it.
I see the small cat landed on it's feet when you dropped it bro just like a real puddy tat. Enjoyed the video so stay safe up your way
I used to get lifetime warranty parts from AutoZone but I got tired of replacing them.
Wanna know where my 2nd gens grid heater is? In the garbage :} Arizona life
Funny you ask,just making cookies for the grand daughters.
Jeff have you ever done a video of the older fuel truck you have in your yard?
Looks like Olivia writes better than you, Jeff.
A friend just got a new Ram with a hemi. Flew to Wisconsin from Kentucky , paid $37,000. It’s the basic truck 1500.
Yah but that is a grocery store truck...
For the rest of you guys that don't want to change the starter you can get heavy duty contacts for your solenoid. I've had them in mine for years, and you can replace them without removing the starter. They are made by LarryB and you can find them on Amazon, eBay and other truck parts places.
www.amazon.com/dp/B00D2C1URK/ref=cm_sw_r_apa_i_V6MSEb7AXYDZE
that is the best way to fix them starters seemed like i needed a new starter every year until upgraded them contacts you can buy the originals at genos garage for $19.95 www.genosgarage.com/product/lb-r90ss/engine-rebuild-kits-3
Noticed the Australian notes on the wall!💲
It' a Fiat not a dodge (ram), the new ones
Thanks for sharing and take care. 👍
Even the model D6 lands on it feet.
04 400,000 07 270,000 08 19,000 Cummins 💪
Very nice video, Thank you.
Gator 🐊 head made the video
Mopar or no car
NAPA know how
Right on
👍👍
☕️👋⚖️
For a 70 something old with a shot prostate and body breakin down on him, I'm surprised how well ya put that starter and heater in. 😂😂🤣🤣
You can have a kubota. Hitachi. Deer .or linkbelt.but king of the jungle is a cat!!!