You picked a convertiable for drift car? 1. it's alot heavier than coupe or 4-door... 2. it's way more flexible chassie 3.you need to add rollgage for safety and strength. 4.that adds weight even more. 5. 2,8l engine makes about 190hp which isn't really that much. power/weight ratio is littlebit low.
+dakota croasdale Yeah its sad because i like the look of them and love Cummins but the steering on them will go loose when you put some miles on it Plus i love almost all other Mopar vehicles
I just wanted you to know almost every other youtuber I watch I only watch part of the video or skip to the parts I want to see. With your videos I always watch the whole thing. Your videos are always so funny and interesting. Keep up the good work and good luck.
I hate using a come along to pull shit onto my trailer, so I fabbed up a receiver on my rock bumper so I can hook my trailer to my front bumper and use my winch to pull stuff up instead of spending a crap ton putting a winch on the trailer haha
my uncle had a BMW m3.. tuned it himself, was fucking awsome even went on racing tracks... but when it was almost finished... it got stolen... he didnt work on a car for about 5-6 years.. now hes restoring & upgrading an old Rat Loader, currently has an v8 XD. the thing is massive.
I remember when I was in the whole diesel truck fad lol its just to expensive and not practical unless you're pulling a big trailer or hauling a bed full of cinder blocks every day
sick videos dude i watch your vids so im not boreddo you ride ur 4 wheelers or your dirtbikes more i might get a sticker from you for my four wheeler :)
Well I know this isn't a super relevant question, but you mentioned in an old video I saw that the crf450r and kx250f chain tensioning is different. Which one gets tighter as the rear suspension is loaded and which loosens upon load? I'm asking because I just bought a kx250f and don't know
hello Dalton I have a question I was wondering if maybe you could figure out my problem I have a gas scooter and I was trying to take a gas can to make it work as the fuel source could you help me out
Why are there no youtubers getting hotrods or drag cars, only drift cars? I want to see a youtuber that builds hotrods and works on them and knows a lot. That's something I could relate to for sure.
"Dont want to spend alot of money"
Buys bmw
😂😂
actually this bmw are cheap as chips
Its and old BMW, not like a new rich ass Bema
+Bo007 Duke yes the car is cheap. But the parts and the special bmw tools are not
e36 parts are everywhere
Should have got a miata and turboed it like the rest of youtube!
or went completely different and be original
The Rooster I was just being a smart ass
MotionAutoTv LOL. Keep up the good work on your videos man.
Thanks!
Advertise your channel more noob
This is gonna be a whole new era of 3DMachines with that bmw.
The sound of that truck 😍
It sounds fucking beautiful
DOLTON YOU ARE THE REASON I RIDE DIRT BIKES
Dalton*
D o l t o n
Same thing kids 😂 there both the same but ones in caps
𝓑𝓲𝓽𝓬𝓱
spell names much
convertible better buy a roll bar
i bet it already has one..
probably sold it looks like the old owner striped it for parts before selling it :/
Oh Hell No, It's pretty common to see drifting cars without bumpers, maybe he learned the hard way that he should remove the bumper...
Albanus35 ik it probably had a drift bumper on it
You picked a convertiable for drift car?
1. it's alot heavier than coupe or 4-door...
2. it's way more flexible chassie
3.you need to add rollgage for safety and strength.
4.that adds weight even more.
5. 2,8l engine makes about 190hp which isn't really that much. power/weight ratio is littlebit low.
cummins, awesome engines, the truck not so much
poppin ball joints every where ya go.. yup its a dodge.
Cummins is the only reason i drive a Ram
+Supah BIlly! haha yep they are awesome I just don't like the truck
+dakota croasdale Yeah its sad because i like the look of them and love Cummins but the steering on them will go loose when you put some miles on it
Plus i love almost all other Mopar vehicles
+Supah BIlly! yeah I like some Mopar stuff, I'm more of a ford guy but callers are my second favorite muscle car
Hahahahaha I lsot it @4:00 Convertible BMW for drifting... good luck and stay safe mate!
I love this channel. Something weird and new every couple episodes. Keep up the good work, you have yourself a life subscriber!
I just wanted you to know almost every other youtuber I watch I only watch part of the video or skip to the parts I want to see. With your videos I always watch the whole thing. Your videos are always so funny and interesting. Keep up the good work and good luck.
you are now my favorite youtuber... everything I enjoy in one place
You may have broken the intercooler that is the thing that is under the front bumper
And the intercooler looks like a radiator
Thats not an intercooler. lol
That car dosen't have a turbo and therefore no intercooler..
Definitely a radiator at the front, not an intercooler.
Its the a/c condenser the radiator is behind the condenser. lol you guys
how many hillbilly dose it take to load a car
How many hillbillys does it take to use a soda machine
+Sean Fitzgerald none cause we all drink beer
+Sean Fitzgerald none cause we all drink beer
all of em
I have a Big Tex trailer as well. It's awesome, pulls straight as an arrow.
Even better then a drift trike......awesome do it upp!!
I hate using a come along to pull shit onto my trailer, so I fabbed up a receiver on my rock bumper so I can hook my trailer to my front bumper and use my winch to pull stuff up instead of spending a crap ton putting a winch on the trailer haha
Z3 power steering racks are direct bolt on to e36's. Very straightforward install, that rewards with a tighter steering ratio :)
Yes! This channel is coming back!
So excited for the channel! Awesome video dalton
Can't wait for the build!!!!
Hope you put a roll bar in it. It will make a good drift car.
I watch everyone of your videos and they make my day so much better I wanted to let you know that and that you should keep up the good work !!
Am I the only one who smiled when the beaut came around the corner towards the trailer? xD
Yea same hahaha
+Sethyyy what logo is your profile pic?
Awesome e36 man ! Cant wait to see what you do to it !
Hey dude! Hope your days going great
my uncle had a BMW m3.. tuned it himself, was fucking awsome even went on racing tracks... but when it was almost finished... it got stolen... he didnt work on a car for about 5-6 years.. now hes restoring & upgrading an old Rat Loader, currently has an v8 XD. the thing is massive.
Nice stop at bk on camp road in Hamburg
you can fix the pullstart with a metal paw from a hpi baja 5b or a losi fiveT pullstart from DDM or killerRC
Awesome addition to the machines
this channel fnna be lit and grow so much more now from a bunch of new subs from the drift community
haha awesome can't wait for more on this build!
Hell yea I mean I watched your videos here and there before but now a drift car SUBBED lol
I was sitting at tim hortons when you guys parked haha I used to live right in that road you guys went into the parking on
Love that sticker on the back of the truck
I love the rollin coals in the beginning nice vid man
That's awesome I love watching your videos
+3dMachines what editing software do you use
Clean 12 valve, whats with him being all over the gear select? Manual VB or trying to be cool?
now i see why i seen you on haggard garages channel! sick hyped to see this
I like the Cummins better than the duramax
give us a reason why you like the cummins
Hell yah
+SurviventheOnslaught cause it isn't a pos and it can pull more
+Bassislife 22 sound like every white collar bitch
+Bassislife 22 or you sound like a bitch who is all green peace and diesels are bad and so polluting but fuck all you white collar bitches like you
i knew youd get one when i saw you commented on haggards vid! congrats on the car tho!
Are you going to weld the diffentrall
1. It's a vert 2. The fucking chassis definitely isn't straight 3. It doesn't even run. Drift missle or not, always make sure the chassis is straight.
Because drift car
DRIFT CAR. I JUST LOVE THIS CHANNEL MORE.
I clicked on the link for the shirts, but it doesn't give any sizes for the hoodies.
Love this channel.
6:05-obvious thing to do would be to put boards in front of rear wheels then winch over them...im only a kid, and I know that even
I remember when I was in the whole diesel truck fad lol its just to expensive and not practical unless you're pulling a big trailer or hauling a bed full of cinder blocks every day
I can't wait to see u fix it and drift it
that's smart convertible drift car lol
Weight reduction
Head reduction you mean LOL@weight reduction!. Better take off doors for more reduction!
+Krypticate f
Hey love the vids 3D for life really a good insperation thanks for making my day special
3DMachines balling on a budget
You bought a bmw... you already went wrong
haha why you say that ?
BMW are used alot to drift
Hancho familia just a shit ton of issues with them
BOB bb i bet. Thats why i love old cars. Lol a simple engine and transmission. Not a whole bunch of electrical wires.
It's not that it's the fact that it a soft top and not a hard top less rigid
Ended up somehow on this video, but love ur videos man! Keep it up! Definite subscribe for me
AAAAHHHHH YESSSS THE MOMENT IVE BEEN WAITING FOR!!!!!!!
also, i had no idea subaru whels fit on a bmw
I'm already wanting too see you use it
sick videos dude i watch your vids so im not boreddo you ride ur 4 wheelers or your dirtbikes more i might get a sticker from you for my four wheeler :)
syracuse shirt ??? are you from cuse ? thought you were in Canada
should have found a nissan 240 or something but i cant wait to see what you do with the bmw
did not see this coming but this is so good
Is that a 5.9 12 valve
Great vid and what was the song called when U just got in your friends truck
whats the song when that car drifts
was wondering as well
Tokyo Drift, it's always at the end.
teriyaki boyz-Tokyo drift
really why? dont tell me you love miatas ! they dont love there fans like we do
Tokyo drift
I'm from allegany County in the state of New York and love to watch your videos. A possible burnout video in the bmw soon?
Well I know this isn't a super relevant question, but you mentioned in an old video I saw that the crf450r and kx250f chain tensioning is different. Which one gets tighter as the rear suspension is loaded and which loosens upon load? I'm asking because I just bought a kx250f and don't know
What you do with the Nissan
welcome to the e36 gang my dude
Dude that's awesome can't wait for bmw videos
Excellent choice
Don't weld the diff. Buy a mini spool, they are cheap and save you from a big headache later on
this is the beemer with the starter issue i was going to make it a drifter but did not have time to fix it
Dalton i have a metal version of the recoil bit
Are those boost gauges??
3DMachines with a Beamer..with intentions to drift it...grab your popcorn boys this is gonna be one hell of a ride!!!
Hey is any of you bikes two strokes
No
+MrFiretruck101 Jake was the smart one.
lil overkill on the tiedowns there boss
nice car how much was it if u dont mind me asking
That's a badass truck
shark teeth
DUDE , DUDE,... be safe, have fun..... ya, have fun......!!!
You live in Colorado?
what kind of programmer or upgraded parts on the truck
Wont forget the feeling when you buy the first car your gnna build👌🏼
hello Dalton I have a question I was wondering if maybe you could figure out my problem I have a gas scooter and I was trying to take a gas can to make it work as the fuel source could you help me out
How many hicks does it take to get a car on a trailer?🤔🤔
Wow I have never meet another RUclipsr that lives in Gowanda it's surprising I just started watching you though and I really like your content
i don't get why people roalcoal its basically just throwing extra fuel out the pipe. i know some diesels are super powerful but not all are so why
is it a m3 package
with a truck and trailer like that, why no winch?
Give it a spoiler and put the bumper back on it mabey a splitter and fatter tires (new rims)
That ting lookes ruff
What year is that cummins?
whereabouts Canada are you? I'm from the west eh
What year is that truck ?
drift cars are meant to be broken. so don't worry about "crashing and breaking it" if you crash, just spend least amount of money to get fixed.
Why are there no youtubers getting hotrods or drag cars, only drift cars? I want to see a youtuber that builds hotrods and works on them and knows a lot. That's something I could relate to for sure.
Song 3:23 ?
"MY FIRST DRIFT CAR, AND MY LAST"
chose life, dont fuck with my truck, best sticker ever
That car is clapped!