Toyota Corolla Light Symbols and Modes Explained
HTML-код
- Опубликовано: 1 окт 2024
- Find out the meaning of the headlight symbols, and which lights they control. Use the correct lighting mode at night, for the most safety!
⚠️ DISCLAIMER:
Use of the information in this video is solely at your own risk. The creator of this video assumes no liability for any property damage, injury or expenses incurred as a result of any of the information contained in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result.
The creator of this video makes no claims, promises or guarantees about the accuracy, completeness, or applicability of the procedures and instructions contained in this video.
Any injury, damage, or loss that might occur as a result of improper application, improper use of tools or equipment, or from the information contained in this video, is solely the responsibility of the user.
#toyota #corolla #lights
If you enjoyed the video, please press the *like button* 👍. Your support is *greatly appreciated* .
My backlight on my cluster only works when I turn the headlights on manually. They will not come on when DLR is selected at night
@@noahreyman4309 DRL (Daytime Running Lights) is only for the daytime, not night. On my model, the DRL does turn on the cluster backlight though. It turns on very bright, and it's not adjustable by the rheostat while in the DRL setting. On Full Headlights, the cluster backlight is adjustable by the rheostat.
Only the dealer and specialized auto electronic shops can diagnose something like that. The dealer has probably seen that before, so it would be easier for them to figure it out.
Excellent video! Thanks dude! This cleared me on years of confusion between the daytime running lights and full brightness low beam headlights. Thank you so muchhh!!!
You're welcome! I was confused for a while also, that's what gave me the idea to make the video.
Very well explained! Thanks a lot for this very good video!
Nice video! Do you know how can I make all lights to stay on together (low beams, high beams and fog lights) ? I know that is ilegal in the US but I got the same corolla, I imported it from the US, I live in Panamá and it is not ilegal here. I would like to do this so I can have more light and visibility on some roads. Another thing I would like to do is to have the fog lights on with the paking lights. If you or somebody else know how to do this, I would appreciate the DIY or wiring diagram. Thanks!
Should mention in parking light mode, when the car is then stopped and ignition turned off, the parking lights will turn off when the driver door is opened.
Customers some time need help if it’s the newer cars to much to operate for some people 👍👍👍👍
Best explanation video!
I'm glad it was helpful, Thanks for watching!
Do you know the part number for the headlight switch on your Corolla? I have an LE trim that I want to add the fog light, and I need to change the headlight switch to the one that can control fog lights also.
I can't find any part number for your exact headlight switch, which is the one I want (has auto switch + fog light switch).
You'll have to go to the dealer to get that part, and they can look it up, however, I wouldn't do it that way. Most if not all aftermarket fog lights come with a small switch that has a double-sided adhesive backing, and it can be glued in many places where it can be easily reached. Swapping the headlight lever would be only the first problem.. the second would be the wiring.. your car will probably not have the wires that go to the fog lights, the fuse box and relay.. I'm just guessing, but you'll have to check, although I doubt simply changing the lever is all that's needed. I've installed aftermarket fog lights before with the separate switch they come with, and they also come with their own fuse, and it's very easy to install them that way.
Very helpful thank you!
Glad it was helpful!
Your the greatest. 🎉 may I ask you a couple of questions. Sorry it was my second last boyfriend that was a mechanic😂
Thanks. Sure, questions are always welcome! I should make that more clear in the videos.
@@CleverFix do you want me to ask you here or do you want me to ask you on the board so other people can learn women seem to know about things they deem mad stuff and I'm like if you just try a little bit you can do it yourself you know that right I have said that speech a million times.
great discription.thanks a lot
Thanks for watching, it's appreciated!
Good job, thanks!
Glad it was helpful!
I've been using my drls exclusively this whole time lol I didn't even know
Good thing you looked into it 😀 It's very important to turn the light on at the right time for safety.
Same!
Thanks for info I’ll show this tape at my shop on the. Screen
How about the two arrows pointing the opposite ways? What's the purpose of that? Sorry, I'm too lazy to open the manual lol
Edit: It's just a direction indicator icon. It means that this stick is used as a signal that you're turning left or right.
Good question.. The left/right arrows indicate that the turn signals are operated by this lever. I should've mentioned that in the video, but I was more focused on the lights that stay on, rather than the blinkers.
Is this the USA model or Canadian model Corolla?
It's a Canadian Corolla with mandatory Daytime Running Lights. I've outlined in the video other symbols that may be on the lever, such as DRL Off, which I don't have. Thanks for watching!
@@CleverFix I hope I can find a Canadian model in the USA, bc the Canadian model has automatic headlights and the USA one doesn’t (not on the 2014-2015 at least)
@@sailur The US models with a circle position should have DRL also. And the S model should have the AUTO position like mine. The model in the video is an S model also.
Which one is the low beam?
Put it on Auto for automatic low beam, with the lever pulled towards you. Don't push it towards the dash, that's high beams. AUTO Will give you low beams automatically when you need them. OR turn it to the symbol at the top, which is a headlight with light rays (lines) aiming to the left and down. Don't drive on the Circle or Parking lights.
👍👍
Can you do a video on how to change the fog lights?
I'll try, thanks for the suggestion.
Hey nice video. Would you by chance know why my fog lights only come on while the high beams are on at the same time?
Are you sure?? You see the fog light icon on the dashboard, and the blue high beam one at the same time?
@@CleverFix Yea, I’m not sure what could be wrong with it but I noticed it after doing my state inspection. I turn the knob to activate my fog light and nothing will happen. No fog light dash light either. I’ve tried with DRL and headlights being on simultaneously but nothing. Only when I have high beams on my fog lights come on and I also get the light on my dashboard. Very strange.
I have a 2016 Toyota Corolla S
@@noonelikesmike378 So if you push the lever toward the dash and activate high beams, the fogs turn on (while set to on)? And then if you pull it towards you, the fogs also turn on when you pull it towards you?
Just asking, since that would pretty much rule out a mechanical problem in the switch.. pushing vs pulling activates different contact switches. Sometimes problems can happen at the switch itself, since they do wear out from all the movement, especially since this is also the turn signal.
It sounds like a different problem to me though.. so I'd expect your issue to happen on both push and pull.
@@CleverFix Alright, so I just tested this out. Only Fog light switch engaged + pushing / pulling lever= no fog lights. Headlights and fog light switch engaged + pushing / pulling lever = high beams on / no fog lights. Only knob rotated to high beam will make the fog lights turn on.
@@noonelikesmike378 So that's normal, it's what I show in the video. Pushing and pulling the lever turns on the high beams, and the *blue* light on the dash indicates the high beam is on. The knob rotation *does not* turn on the high beams. Only pushing and pulling the lever does. So It sounds like your car is working fine. Remember, only when you see the blue light on the dash , they high beams are on.. and they should only show when pushing/pulling the lever, as shown in the video.