When we got married back in the 70's, (ya I know older than dirt), my wife and I packed from Northern California Mt. Shasta all the way to Yosimite, about 200 miles. Now we had support from her sister who would bring food and clean cloths to various camp sites. BUT my knife was a Vic Hunter and a Buck 110. And we were fine. Today we need a 47 piece Leatherman, which I really like for options. Modern tech brings lots of options. I like that.
Short version of review: 1. Blade is too short 2. File is bad and without metal saw 3. Scissors are ugly in comparison with SAK 4. Awl is not perfect 5. Screwdrivers is OK
That hair pull was hilarious. Excellent usage tests as usual. Im interested in this one. I don't have the free yet and don't think I need it. Maybe this might be a better fit.
They were stagnant for a few years so i appreciate them trying to spice up the market but none of these tools have really compelled me to replace my old stuff with them.
great video. I am considering the T4. I have long carried a Victorinox and love it, but there are times when one-hand opening is just so helpful, and a deep carry pocket clip makes life easier. Having the awl and the phillips screwdriver deploy out the end (vs t-handle style like my SAK) would be great as well. I think I would miss the SAK scissors though...
Another great alternative are the Boker Tech Tools, especially 5, great EDC knives and UK friendly too. I did bite the bullet and buy a T4 though as it was the tool I was most looking forward to. See how it goes. My initial impression was that it contained quite a lot of plastic!
Nice video. Good job. I have noticed the leatherman has limitations on what the scissors will do. The leatherman weighs to much compared to say a Victorinox Explorer which is a comparable tool at about $36 and 3.5 oz about an oz lighter and almost half the price.👍
Yep as many have expressed in the comments I'll stick with my SAKs for this style of tool. It's not a bad attempt by Leatherman like you said but it doesnt beat an SAK imo. I suppose if you were a leatherman super fan boy instead of just a fan boy like me, then you might want to get one if you just want to carry leathermans. I have leathermans and Vics and I carry the tool that fits the need best for the circumstances I may find myself in. For me that means my Victorinox Trekker is my EDC 99% of the time along with a Classic SD on my keychain for the scissors. My Leatherman Wave is in my truck, my Victorinox Explorer sits on the end table next to my lazyboy in the living room, I've also got a Leatherman wingman tucked in my EDC bag just in case, and finally Ive got a Victorinox camper and a Leatherman Juice CS4 in specific outdoor/survival kits as well as 2 more Victorinox Trekkers(My all time Favorite Knife/multitool)
Another consideration: Love the channel. Loved the comments. Love Victorinox. I wouldn't compare this to the Tinker at $30. #1: The T4 has 100% locking tools. Victorinox has models that the blade locks. If you add the locking blade plus all the tools and the pockets clip accessory for VIC, the price is up there with the T4 or more. Those VIC models are longer and just as wide. The Vic Outrider is close, but has no clip, for $60. I love the Outrider. My LEO price on both the T4 and VIC are about the same. The Outrider is bigger than the T4. #2: Magnets are great and unlike many things (Springs) don't wear out. However, they are expensive ( I teach Science and Mathematics since retiring, I have to order Magnets for my classes).
There is definitely something unnatural looking about an awl without a pointed tip. I feel they could have included that screwdriver in some other way and given us a more conventional pointed awl.that would be better for piercing!
@@WeAllJuggleKnives @WAJK Ever test / look into these double walled insulated "growlers /water bottles" ? Just got ruclips.net/video/d4uc-Ecmafw/видео.html
I totally love the design of these new leathermans but I totally dislike most of the tools. That file/screwdriver thing lone drives me mad. I already hated it on the Wingman. And why not replace all the screwdrivers with a bit holder? Meh. A very good review, though.
Like I said on another review for this unit, it's bulkier than I was expecting, so I may as well step up to a full-sized Leatherman or step down to a SAK.
That is a good point, the two categories you mention may well serve people better and they may not need anything in-between. I often feel that way about various categories and sizes of knives (but I still try to do a thorough review in case someone else likes a particular category more than I).
@@WeAllJuggleKnives I LIKE METAL, my multi-tool is a $10 Marbles camp knife 100% metal, and works like a charm for me. Yes, the beer put weight on me too....I'm down to one 16oz. PBR after a long hot Florida charter day. LOST 60 POUNDS. no sugars, too.
Always looking for your vids You are a very knowlageable youtuber for me You are the best Could you make an update of the 8 blades you ever néed And i am desperatly seeking for aa flashlights Great work as always bye
I love leatherman i had the pst2 then that got lost or stolen. Got a wave & lost that. Personally i like leathermans multi tools better than gerbers multi tools.
You lost a lot of weight! Looks great! I like the awl, like the scissors. If I had this tool, I would grind the tip to be sharp and lose the mini screw driver. Not happy with the file and not at all happy with the thickness of the tool. I will be skipping this multitool.
Juggs: They stole the prybar design directly from Victorinox tool, I think the Spirit! Looks cool and the tool is the most used (well besides the scissors). This T4 is very interesting>
If you work in stocking or retail, use the osha approved utility knife that is provided to you and not a pocket knife. It’s the right tool for the job, it works better, it’s what it’s made for, it’s free and replacements are free, and you won’t get fired for using the osha approved box cutter like you could be for using a pocket knife.
Man thats crazy thats first leatherman i was excited about sinch the juice and it sold out FAST cant find it :edit im gonna call leatherman dirictly im not smart sometimes
@@WeAllJuggleKnives im very excited about it brother i ordered it dirictly from leatherman not 5 mins ago like ive touched on before ive carried the juice for years im happy with diriction they went even if jiuce model is gone
I ordered the T4 same day it was released on the Leatherman website and returned it the following day. Why?... Because it's a joke! This tool should be priced at $30-$35 max. A thick chunk of plastic mixed together with a 420HC blade and a bunch of micro tools makes the T4 look like one of those made in China flea-market multi-tool. For the same price you can get a much better quality product. Let's wait for the release of the "also overpriced" $80 and $90 FREE K2 & K4 knives coming out by the end of July.
Resume: neither of the instruments is perfect. Philips screwdriver plus bottle opener piece seems to be the best one; prybar plus package opener is normal; blade is short; scissors do not cut paracord; file is just awful. And all that for $60. Fail.
When we got married back in the 70's, (ya I know older than dirt), my wife and I packed from Northern California Mt. Shasta all the way to Yosimite, about 200 miles. Now we had support from her sister who would bring food and clean cloths to various camp sites. BUT my knife was a Vic Hunter and a Buck 110. And we were fine. Today we need a 47 piece Leatherman, which I really like for options. Modern tech brings lots of options. I like that.
Short version of review:
1. Blade is too short
2. File is bad and without metal saw
3. Scissors are ugly in comparison with SAK
4. Awl is not perfect
5. Screwdrivers is OK
The weight loss is impressive man. Congrats and again another awesome review!
Thank ya!
Wow really awesome looking New Leatherman Free T4!!! :D
Thanks, buddy!
@@WeAllJuggleKnives you're very welcome 😊
That hair pull was hilarious. Excellent usage tests as usual. Im interested in this one. I don't have the free yet and don't think I need it. Maybe this might be a better fit.
$60 for half a Leatherman...I can get a whole Leatherman for that price
Yeah but will you EDC it?
They were stagnant for a few years so i appreciate them trying to spice up the market but none of these tools have really compelled me to replace my old stuff with them.
Well yeah it's a nice little multi tool, but I ask why have one when you can get a Victorinox Tinker Swiss army knife for $20.00?
Locking blade, pocket clip.
great video. I am considering the T4. I have long carried a Victorinox and love it, but there are times when one-hand opening is just so helpful, and a deep carry pocket clip makes life easier. Having the awl and the phillips screwdriver deploy out the end (vs t-handle style like my SAK) would be great as well. I think I would miss the SAK scissors though...
Thanks! It sounds like you definitely have reason to pick one up :D
Thanks a lot for showing!
Thank you for watching!
Very thorough. Almost seems like there's a trend with the extra stubby files. Files and saws should always be as long as possible, I feel.
Checking out the new Leatherman T4 multitool :]
Another great alternative are the Boker Tech Tools, especially 5, great EDC knives and UK friendly too. I did bite the bullet and buy a T4 though as it was the tool I was most looking forward to. See how it goes. My initial impression was that it contained quite a lot of plastic!
Nice video. Good job. I have noticed the leatherman has limitations on what the scissors will do. The leatherman weighs to much compared to say a Victorinox Explorer which is a comparable tool at about $36 and 3.5 oz about an oz lighter and almost half the price.👍
I kinda wanted the tool set to be what you find in a scout knife...imagine The Leatherman Scout....oh my.
I really like the victorinox recruit always seem to make it into my pocket organizer with my Fisher space pen and my olight mini flashlight 👌
Yep as many have expressed in the comments I'll stick with my SAKs for this style of tool. It's not a bad attempt by Leatherman like you said but it doesnt beat an SAK imo. I suppose if you were a leatherman super fan boy instead of just a fan boy like me, then you might want to get one if you just want to carry leathermans. I have leathermans and Vics and I carry the tool that fits the need best for the circumstances I may find myself in. For me that means my Victorinox Trekker is my EDC 99% of the time along with a Classic SD on my keychain for the scissors. My Leatherman Wave is in my truck, my Victorinox Explorer sits on the end table next to my lazyboy in the living room, I've also got a Leatherman wingman tucked in my EDC bag just in case, and finally Ive got a Victorinox camper and a Leatherman Juice CS4 in specific outdoor/survival kits as well as 2 more Victorinox Trekkers(My all time Favorite Knife/multitool)
Another consideration: Love the channel. Loved the comments. Love Victorinox. I wouldn't compare this to the Tinker at $30. #1: The T4 has 100% locking tools. Victorinox has models that the blade locks. If you add the locking blade plus all the tools and the pockets clip accessory for VIC, the price is up there with the T4 or more. Those VIC models are longer and just as wide. The Vic Outrider is close, but has no clip, for $60. I love the Outrider. My LEO price on both the T4 and VIC are about the same. The Outrider is bigger than the T4. #2: Magnets are great and unlike many things (Springs) don't wear out. However, they are expensive ( I teach Science and Mathematics since retiring, I have to order Magnets for my classes).
Thanks! That is a great summation of good points about the T4, I'm a bit more glad that I have one now!
Thanks for the review, ordered a T4 and waiting on the delivery. The Paracord cut I would use the knife if need be.
Welcome! All in all, I think you will be happy with it.
That Awl look like shit.. Leatherman design team fail again
There is definitely something unnatural looking about an awl without a pointed tip. I feel they could have included that screwdriver in some other way and given us a more conventional pointed awl.that would be better for piercing!
@@WeAllJuggleKnives I build multitool , I know that awl not that good..
@@WeAllJuggleKnives @WAJK Ever test / look into these double walled insulated "growlers /water bottles" ?
Just got ruclips.net/video/d4uc-Ecmafw/видео.html
Dark Arts yes they need a wave and free p4 mashup
It's because it's a mini screwdriver first and foremost.
I totally love the design of these new leathermans but I totally dislike most of the tools. That file/screwdriver thing lone drives me mad. I already hated it on the Wingman. And why not replace all the screwdrivers with a bit holder?
Meh.
A very good review, though.
Another overpriced leatherman gimmick, had one for an hour and sent it back. Think al stick with victorionox.
Small locking blade. Deal-maker.
$60?! Good lord, that’s a lotta money
Their prices have definitely gotten high lately, I’ve started including a list of more budget friendly alternatives with all my videos :D
It's 80 euro (90$) in europe... 😲
It’s $100 AUD ($70 USD) here in Australia. The P series was marked up even more at 50% more expensive.
In nsw Australia it’s $139 and t2 is $99
Out of the new range of Leatherman multitools, have they got one without a locking knife ?
No, gotta buy one of the discontinued Juices before they disappear.
"Want to shank a fool?" LOL
Do you want the plastic scales breaking off?
Like I said on another review for this unit, it's bulkier than I was expecting, so I may as well step up to a full-sized Leatherman or step down to a SAK.
That is a good point, the two categories you mention may well serve people better and they may not need anything in-between. I often feel that way about various categories and sizes of knives (but I still try to do a thorough review in case someone else likes a particular category more than I).
Well your reviews are greatly appreciated.
looks like you're skinnier.......but, is there plastic on that tool? looks like it.
Thanks bro, yeah it has plastic spacers, or what they call their lightweight frame.
@@WeAllJuggleKnives I LIKE METAL, my multi-tool is a $10 Marbles camp knife 100% metal, and works like a charm for me. Yes, the beer put weight on me too....I'm down to one 16oz. PBR after a long hot Florida charter day. LOST 60 POUNDS. no sugars, too.
Always looking for your vids You are a very knowlageable youtuber for me You are the best
Could you make an update of the 8 blades you ever néed
And i am desperatly seeking for aa flashlights
Great work as always bye
I'll see what I can do :D
I don’t see the advantage of this over a SAK at the current price. Tool looks overly chucking as well but hard to judge on video.
The entire "FREE" line is grossly overpriced.
I love your video man
But I'll stick with my victorinox feildmaster
Thank you, bro! Good choice!
The price of the T4 is a little high, but it locks!
Yeah, that's the advantage compared to Vic but it's a bit pricey for me.
Lol well food prep is for the back packers that wonder if it will replace a mora to save weight . is it a camp tool maybe more urban edc
Many thanks! Excellent video!
Man,did you turn sideways? I cant see ya....good job brother!
Thanks, my friend!
Buy a good Vic, then buy the nylon red or black scales for $7.00, and you have the bomb!
I own PioneerX. For the price, the scissors and awl on T4 is a real letdown. I own a wave, the scissors was also a letdown.
60 bucks for that thing ? Leatherman keeps raising their prices !
Pretty damn cool not to bad , great review brother. 👊💀
Thank ya, brother!
who at 2:26 saw that ant in the top left corner run by!
I did!
Looking good! 👌🏻
thanks!
Great review, as usual...interesting too; but a bit too much $! I'll stick with my Blast... Ty.
Ooh you still have a blast Awesome! I lost my blast and I miss it, Great compact leatherman back when leathermans were more affordable.
Looks good to me. Even the awl/reamer I like. The only reason I wouldn't buy it is because of the price.
Holy crap! How much weight have you lost?! good job man
Thanks, bro! About 85 lbs lost.
@@WeAllJuggleKnives if i loose that much I'd be in the hospital bro 😂 💪
Did not do the job as well as that old feldmaster you used some time ago any way good video subd you again 👍
Great video it was also quite funny
Glad you dig it!
I love leatherman i had the pst2 then that got lost or stolen. Got a wave & lost that. Personally i like leathermans multi tools better than gerbers multi tools.
You lost a lot of weight! Looks great!
I like the awl, like the scissors. If I had this tool, I would grind the tip to be sharp and lose the mini screw driver. Not happy with the file and not at all happy with the thickness of the tool. I will be skipping this multitool.
Hey! I use files... lol seriously though a file on a leatherman is a plus
Juggs: They stole the prybar design directly from Victorinox tool, I think the Spirit! Looks cool and the tool is the most used (well besides the scissors). This T4 is very interesting>
Excellent video.
Thanks, bro!
If you work in stocking or retail, use the osha approved utility knife that is provided to you and not a pocket knife. It’s the right tool for the job, it works better, it’s what it’s made for, it’s free and replacements are free, and you won’t get fired for using the osha approved box cutter like you could be for using a pocket knife.
Fu k your GAY.....use whatever knife you want.
I like it! But you should have stressed the importance of not running with scissors.
I like to live on the edge :D
Man thats crazy thats first leatherman i was excited about sinch the juice and it sold out FAST cant find it :edit im gonna call leatherman dirictly im not smart sometimes
Yeah I think this T4 is the one that has most people interested out of the whole free series.
@@WeAllJuggleKnives im very excited about it brother i ordered it dirictly from leatherman not 5 mins ago like ive touched on before ive carried the juice for years im happy with diriction they went even if jiuce model is gone
@@WeAllJuggleKnives say brother whats temperature in your area as of late its crazy hot in texas
We've been having a heat wave recently, highs 85-90, lots of humidity, plenty of mosquitoes.
@@WeAllJuggleKnives yeah man weve got storms right now so more mosquitoes to come they have already been crazy thick
I ordered the T4 same day it was released on the Leatherman website and returned it the following day. Why?... Because it's a joke! This tool should be priced at $30-$35 max. A thick chunk of plastic mixed together with a 420HC blade and a bunch of micro tools makes the T4 look like one of those made in China flea-market multi-tool. For the same price you can get a much better quality product. Let's wait for the release of the "also overpriced" $80 and $90 FREE K2 & K4 knives coming out by the end of July.
I agree the pricing is whacked, I think it should be around $30-40 because Victorinox Super Tinker can be had for around $32.
Why should it replace my SwissChamp? Oh wait I shouldn't.
scissors of Free s are not good
The Leatherman free series is really meh. The Rebar is still the best.
Resume: neither of the instruments is perfect. Philips screwdriver plus bottle opener piece seems to be the best one; prybar plus package opener is normal; blade is short; scissors do not cut paracord; file is just awful. And all that for $60. Fail.
THICC
12 tools without a can opener! Not acceptable!
It just came out, the price will come down.
Milkman4279 leathermans prices only go up after time lol. The wave used to be 70$ now its 90$, the sidekick used to be 30$. It is 55$
Not impressed for the price. Leatherman thinks they are Yeti now. LOL
LOL
Looks like you dropped some weight.
I'm glad you noticed. Actually went from 260 to 175, since October.
WeAllJuggleKnives Amazing! Congratulations!
Hi I love kardhasians asses too!
"thickest butt........
no saw no care
C'est vraiment des couteaux de merde