Watched another install video where the guy drilled the under frame side holes bigger to tuck them up tighter to the body so less gap and higher ground clearance. I love that my Backcountry came will Factory installed ones but I really like those Mopar Brushed and Perforated Side steps !!! I was lucky enough to drive a Friends TRX and they were on it and the Gotta have it Factor is there !
Thor…your video has been very helpful deciding on what to purchase. There are so many options available. My concern was to have them up tight to the rockers. This rebel is my wife’s truck and she is worried about slipping on the board. Can you comment on this plz ? Another question is if they have a lot of flex ? Thanks for making this video !
Used your video for a confidence booster. Put the same ones on my 2021 Quad Cab this morning. Easy. I love how they look and match the truck. Thank you for the nudge.
Just got my new 2021 Ram Rebel yesterday. This is my first install on it I am going to do. I have been looking for which ones I wanted and this helped me make up my mind. Good job!
Very helpful video. These look sweet are are the only side steps you should be installing on a Rebel. I did not think I needed them, but they make getting into the truck much easier for the wife, kids, etc. I plan on more off-roading. They sit up high so should not be an issue. This is a total DIY install, however you do need a torque wrench that can go as low as 8lb. Not very common what I found. Make sure you buy or borrow one before you being. My neighbors with all the tools did not have this so I had to go to a mechanic and have him do the final turns with the proper wrench. If you don't follow the instructions on this you may have issues. Start to finish should be 1.5 hours or less.
I assume those will fit a 2022 rebel? My rebel has been ordered and I’ve been looking to see what type of runningboards I would like to put on it so thanks for the video because I like those the best that I’ve seen. Thanks
I was looking in the description for the side rails on the Mopar website and it says not compatible with front splash gaurds... Have you had any issues? Was thinking of getting the Mopar molder splash gaurds
So Thor, straight up are these the best option, despite the expense? I have HAVOC hoop style, which look pretty good and ingress is good, but egress is a stretch forcing you to fall from your seat to land on them, about 12" from floor pan. This will cause accelerate seat cushion wear at a minimum. Looking for a better option.
These Mopar boards sit high up so I guess that’s why they call them the “off road” style. I’m 6’ tall and usually just bypass the boards when getting out. They are right there when you open the door so the shorter people in my family such as my wife and kids use them for both ingress and egress. Ive had zero issues with them and the holes let the water and mud run right off.
@@zinbad-carreviewsandmore1476 yes I recommend them and I have only had them in the snow/slush so not sure about rain noise but I don’t think that’s gonna be an issue.
Are these compatible with 2020 rebels as well? One website that sells them told me they were not so wasn't sure. Seems like the bolt patterns should be the same.
Add in a drive around exterior view on the next appearance part install so we can see the truck in it’s natural habitat. Besides that, I think it looks good parked there with those side steps. Thanks for adding the part number.
@@sunnyvalejedi yes I wouldn’t want to bang them off any 🪨. You may want to get the rock sliders that can handle that. These are nice and high tho 🤷🏼♂️
Best looking running board hands down. They’re nice and tucked up and don’t make the truck look low.
I like those running boards they're high up and stick out a little bit and probably help stop someone's car door from ramming into the side
Watched another install video where the guy drilled the under frame side holes bigger to tuck them up tighter to the body so less gap and higher ground clearance. I love that my Backcountry came will Factory installed ones but I really like those Mopar Brushed and Perforated Side steps !!! I was lucky enough to drive a Friends TRX and they were on it and the Gotta have it Factor is there !
Can’t wait for mine to arrive at my dealership!
Thor…your video has been very helpful deciding on what to purchase. There are so many options available. My concern was to have them up tight to the rockers. This rebel is my wife’s truck and she is worried about slipping on the board. Can you comment on this plz ?
Another question is if they have a lot of flex ?
Thanks for making this video !
The board is coated in a bed liner type coating so it has a lot of grip. I never notice them flexing at all. Thanks
Used your video for a confidence booster. Put the same ones on my 2021 Quad Cab this morning. Easy. I love how they look and match the truck. Thank you for the nudge.
Awesome!! I love these boards.
Just got my new 2021 Ram Rebel yesterday. This is my first install on it I am going to do. I have been looking for which ones I wanted and this helped me make up my mind. Good job!
Right on! I love my steps. I’m sure you will also. I’m glad my video helped you make up your mind. 👍👍
I bought a pair for 250 dollars. The best investment I have ever made.
Daaaamn dude !! That’s sick, thinking of trading in my 2015 Gmc all terrain z71 for a new rebel like this
do it. you won't regret it. just made the jump myself from a 2013 silverado. enjoying the truck every day.
Very helpful video. These look sweet are are the only side steps you should be installing on a Rebel. I did not think I needed them, but they make getting into the truck much easier for the wife, kids, etc. I plan on more off-roading. They sit up high so should not be an issue. This is a total DIY install, however you do need a torque wrench that can go as low as 8lb. Not very common what I found. Make sure you buy or borrow one before you being. My neighbors with all the tools did not have this so I had to go to a mechanic and have him do the final turns with the proper wrench. If you don't follow the instructions on this you may have issues. Start to finish should be 1.5 hours or less.
a bicycle torque wrench goes down that low
I love it when the title says what it is, and than he says in the video if we can guess what it is 😀
I’m making sure your paying attention 🤣
@@thorrepairs6557 😂
Going to put these on my TRX, if it ever comes in.
Oh man!! I’m so jealous!
I assume those will fit a 2022 rebel? My rebel has been ordered and I’ve been looking to see what type of runningboards I would like to put on it so thanks for the video because I like those the best that I’ve seen.
Thanks
OK great thanks so much.
Fred
Work with tools much?
Do you happen to know the size of the bolts and nuts. I lost the bag with the bolts and nuts .
Geez sorry I don’t know. Perhaps the dealer could help. 🤷🏼♂️
Can you post the part# for those running boards. I have the exact truck. Same color. Thanks
I posted it in the description but here it is again.
82215508AC. 👍🏻👍🏻
@@thorrepairs6557 Thanks
I was looking in the description for the side rails on the Mopar website and it says not compatible with front splash gaurds... Have you had any issues? Was thinking of getting the Mopar molder splash gaurds
I have seen that. Maybe it’s for a different set then mine. Maybe it’s for the moulded flaps. I had no issues with the flat style flaps.
So Thor, straight up are these the best option, despite the expense?
I have HAVOC hoop style, which look pretty good and ingress is good, but egress is a stretch forcing you to fall from your seat to land on them, about 12" from floor pan. This will cause accelerate seat cushion wear at a minimum. Looking for a better option.
These Mopar boards sit high up so I guess that’s why they call them the “off road” style. I’m 6’ tall and usually just bypass the boards when getting out. They are right there when you open the door so the shorter people in my family such as my wife and kids use them for both ingress and egress. Ive had zero issues with them and the holes let the water and mud run right off.
Hey, thanks. So would you recommend them? Also are they noisy in the rain?
@@zinbad-carreviewsandmore1476 yes I recommend them and I have only had them in the snow/slush so not sure about rain noise but I don’t think that’s gonna be an issue.
Are these compatible with 2020 rebels as well? One website that sells them told me they were not so wasn't sure. Seems like the bolt patterns should be the same.
If I was a betting man I would say yes they are compatible.
i have same running boards. i love it!👍
Where can i buy it?
These look awesome, how are they holding up? Do they flex or anything with your weight on them?
They look the same as they did when I first put them on. There is no flex to them when standing on them. I’m 210 lbs. 👍🏻👍🏻
I wish I had a Rebel. Looks amazing!
Want to see what else you do to it.
I’m glad you enjoy and yes there will be more!
We have the exact same truck! Enjoy!
I am and I will enjoy it!! Thanks for subscribing!!
@@thorrepairs6557 if you want any mod ideas, check out my Instagram @hemirebel12
cool mud flaps, I would like that only I have no rebel
Also who did you buy them from and approximately what did you pay?
I bought mine from the dealer and we’re about $1000 Canadian. Not cheap. They still look like new and I’ve had them for over a year.
What's the width of the step? Looking to order these but wanted to get that dimension first, cant find that info online. Thanks
They are 7.5 inches wide by 86 inches long.
Add in a drive around exterior view on the next appearance part install so we can see the truck in it’s natural habitat. Besides that, I think it looks good parked there with those side steps. Thanks for adding the part number.
very good video of product... thanx bro
Wondering if these would fit my power wagon 🤔
Double check with your dealer but I’m sure they would fit.
@@thorrepairs6557 according to the part # you provided, it won't fit but I'll call tomorrow to double check with them. Thanks for the quick reply
@@luisrosales9518 Did you ever find out if these would work on your Powerwagon?
@@danted4102 no, I went with the Go Rhino RB20 running boards instead
Nice video thx. How much costed you the part? I’m in AB
It was just under a $1000. Worth it and love the look. 👍
@@thorrepairs6557 thank you. Yes they look good 👍🏽. Well done.
Where did you get the ram mud flaps?
I got them from my Ram dealer.
Would these running boards fit a 2021 ram Laramie sport crew cab?
I see no reason why it wouldn’t but I would check with your dealer.
Yes they fit. I ordered them just today at the Ram dealer for my 2021 Larime.
I was looking at a set at the dealership. My only worry is that they'll get trashed off road.
They sit quite high up so your clearance will still be pretty good. Depends of what kind of off roading your doing.
They sit quite high up so your clearance will still be pretty good. Depends of what kind of off roading your doing.
They sit quite high up so your clearance will still be pretty good. Depends of what kind of off roading your doing.
We've got some pretty good wheeling where I live-these running boards look and function great but one big rock 😬
@@sunnyvalejedi yes I wouldn’t want to bang them off any 🪨. You may want to get the rock sliders that can handle that. These are nice and high tho 🤷🏼♂️
Nice looking boards! How are they holding up ?
I love them and they look the same as they did on the first day and they see a lot of road salt in the winter. 👍🏻
@@thorrepairs6557 Awesome, looking to get some when my Rebel gets here !
@@Z22-m5o i seen these boards on a RAM TRX and I’m glad I got them. I think you should also 👍🏻
Where can i buy that?
I bought my steps direct from the dealer.
What the price for both ???
With taxes about $1000 CAD
anyone have any clue if these would fit on a 2022 2500?
I would say probably not since the body is different. I guess you could reference the Part# 82215508AC and see. 🤷🏼♂️
Looks like the rhinos