Whenever Fishers shop comments on Gunflint, or vice versa, I get the chills.. Like I'm part of the cool kids club cause I've had direct messages from both of them....
Imma be honest, I just want to see more consistent content from you. I really like your videos and your delivery of information. Thanks for the content!
I have a Boss LS1420. Lightburn is great. Been using it since the beginning. The Rotoboss is an exceptional product. I've used it a lot as well. I'm a hobbiest so all my creations go to friends and family.
Same as other RUclips vids, I like to pop in and check out the info. Presentation will keep me coming back. I’ve been watching you for sometime now(woodworking) and enjoy your vids. I’m relatively new to laser work and am trying to gain some insight. Thx for the vid.
The whole video was great, but I think I loved your outro best. Felt very much like podcast-Mark's banter. I was committed to watching you rebuild that Casita camper even though I have no interest in such things myself, so I'm guessing I'm pretty much a hardcore fan who isn't going to be put off by however you present the laser stuff. Sadly, I think the opinions of your more casual viewer is going to be more important than my opinion. Seriously, though...I'd watch a video of you making your jerky and sausage just because I like the way you present things and I think you do a good job of editing out the fluffy while keeping in the subtle humor.
Aw shucks, I really appreciate that! You might get your wish on the sausage and jerky thing - after that goose hunt I have plenty of meat to be making something out of!
I'm really interested in this topic. Great job explaining everything! I'm in the middle of building my own laser cutter and hope you do some rotary engraving some day
Pretty cool set up Mark. I can see that being really fast and repeatable for jobs like that. Would love to see more laser work on wood projects and the setup process for those.
Looking at Rotoboss, and PIBURN LASER ROTARY ATTACHMENT 4.0. These are the only two I have come across that offer more flexibility when you need to engrave certain glassware, bottles.
Mark, excellent content as always. As for suggestions: definitely keep the laser in your videos. Lets be honest, most of us will not have a laser quite as large as yours to start out, so specific settings are not a huge concern here. But how you incorporate the laser into your projects and the options for customization would be excellent. Your description of the booth you setup at the show was very interesting and some content on here showing that would be awesome. It's the hybrid approach that I'm shooting for: woodworking, lathe, laser, and ideas on how to mesh them together better. Well done!
nice we have a 130 watt omtech in shop but im looking at a monport100 watt laser cutter and getting the y axis your vidoe is great im a newbee the omtech is a budy of mine im still learning my shopsabre 23
Nice video. Appreciate the useful tips and your process. I recently just tried my first rotary with these same tumblers and am having difficulty leveling the product with the sculpfun rotary. Need a good proof to land a potential customer
Several questions. What is the cost of the setup you have? How long does it take to run, say 100 mugs? Isn't there an easier way to do the setup like a placement jig or something?
I'm looking at something like $11k in all my laser stuff setup. You wouldn't have to get one as big as this if you just want to to cups though. Depending on the size of the logo, its taking me between 5 and 6 minutes to laser a single cup. I intend to keep playing with my settings to see if I can get that time down even more. I'm not sure how to make the process any easier - 1) square the jig - 2) Level the cup - 3) Focus. Once you do that for the first cup, you never have to touch it again.
Excellent presentation, Thank you for the clear demonstration, please my challenge is setting the focus right within the diameter of Tumbler..... I just need set up parameters. I am new to engraving on mugs and tumblers. Thank you
Outstanding video. I purchased a 100 watt CO2 laser from China to save money (about 1/2 the cost to US), but have had to rely on youtube for how to set up and run. Have you had any experience engraving glass plating or glass tumblers? Maybe a video? Thanks.
That's completely different to the normal videos - but loved it - found the whole thing very interesting and would like to see more laser engraving. (as long as we still get the other ones too)
Could you mention the wattage of laser you are using, and if engraving stainless steel tumblers what marking spray and speed, power and scan gap settings for those tumblers as well
Excellent Video! Looking around at various Co2 laser options, very impressed with setup you are using in the video. Would be very interested to learn more about unit you are using and your own thoughts having used it for some time. Great information, much appreciate!
awesome video. I just started using the XTool D1 laser engraver. So far it has been an pretty good experience. Where did you buy your laser engraver? I think as my side hustle grows I might be interested in taking the plunge into something like yours.
Good info.....Your machine has removable legs. Is it possible to disassemble the models without legs to get them through a door? What is your maximum workpiece height? Considering buying a 2028 60 or 80w
Hi Mark, some constructive criticism here i hope you'll find useful as you usually aim for high production quality: Using what i assume is Auto-Gain on your recording device for Audio mostly creates some very irritating jumps in volume. A segment may start intensely loud and limited and then decline a good chunk until your voice is barely audible. This has been more obvious over the last year or so, i know it's kind of a safety/convenience thing but still a small advice: Rather set the gain to a lower, all-purpose setting with a simple overload protection/limiter and increase the volume & reduce your dynamics later - which will give you a consistent loudness over the duration of the entire video. Great video in itself as always! Greetings =)
@@GunflintDesigns Mark, if you ever want to do a comparison between the XTool machine and your big beast let me know and I can bring mine down. Might make for some interesting comparisons.
I’ve been thinking about getting in to laser work for a while now, partly inspired by your conversations on the subject over at WBAT. Will that rotary work with other brands of laser? Do you have a particular laser brand you recommend?
This rotary will work with lots of others, but they do need to be the high-power co2 style. The smaller more hobbyist style that Drew has won't work with this. My machine is a Bescutter, but I wouldn't necessarily recommend it because I have fought it a lot since day 1. Boss is a great brand, but a little more money. Same with Epilog.
When I plug my rotary into the laser, it is controlling the wheels of the rotary and making the cup spin when I hit the Y to go up and down so I can’t put my laser over the cup 😅 What in the world am I doing wrong?
Using metric made it so much easier for me to understand what you are doing. Welcome to the rest of the world. You should try using metric for everything as it makes everything so much simpler. 😉 (This is a joke btw. I know how challenging it would be to buy stock in imperial and try to use metric for everything else).
lol. I completely understand that metric is a better system. But I've spent several decades with imperial so it just comes naturally and switching would make my old man brain hurt!
@@GunflintDesigns I totally understand and get that. It's the equivalent of asking someone like me to start using imperial in every aspect of my life. Great video nonetheless. I found it quite interesting and informative.
I am curious if you have any decals. Starting a collection and would be willing to buy a couple if you have any. Just hit me up when you have a moment. Ty. Sincerely WaynesWoodshed
I saw a guy, at a show, that made artwork clock faces using "vinale records", installed the clock motors and sold the shit out of them. Wouldn't tell me how he cut them.
Dude, SO COOL! Thanks for sharing. I will probably never do anything like this, but you never know. I just wish there was some #UNNECESSARYWALNUT in this project...
Dang that rotary is nice. Makes mine look like tinker toys. Cool vid!
I love tinker toys!
I'll have to send you pictures of my Mostly 3D Printed CNC if I ever get back around to finishing it. It makes tinker toys look fancy.
Whenever Fishers shop comments on Gunflint, or vice versa, I get the chills.. Like I'm part of the cool kids club cause I've had direct messages from both of them....
Imma be honest, I just want to see more consistent content from you. I really like your videos and your delivery of information. Thanks for the content!
I would also like that... I can't believe how fast my time is getting away from me these days.
I have a Boss LS1420. Lightburn is great. Been using it since the beginning. The Rotoboss is an exceptional product. I've used it a lot as well. I'm a hobbiest so all my creations go to friends and family.
Great to hear!
Holy crap they made the thumbnail??? These are fantastic thank you so much!!!
Glad you like them! I'm on my way to UPS with them right now!
That was really fun to see the process - thank you! And now I have a new favorite YT video :)
Haha, I'm glad you like them!
Same as other RUclips vids, I like to pop in and check out the info. Presentation will keep me coming back. I’ve been watching you for sometime now(woodworking) and enjoy your vids. I’m relatively new to laser work and am trying to gain some insight. Thx for the vid.
The whole video was great, but I think I loved your outro best. Felt very much like podcast-Mark's banter. I was committed to watching you rebuild that Casita camper even though I have no interest in such things myself, so I'm guessing I'm pretty much a hardcore fan who isn't going to be put off by however you present the laser stuff. Sadly, I think the opinions of your more casual viewer is going to be more important than my opinion. Seriously, though...I'd watch a video of you making your jerky and sausage just because I like the way you present things and I think you do a good job of editing out the fluffy while keeping in the subtle humor.
Aw shucks, I really appreciate that! You might get your wish on the sausage and jerky thing - after that goose hunt I have plenty of meat to be making something out of!
I'm really interested in this topic. Great job explaining everything! I'm in the middle of building my own laser cutter and hope you do some rotary engraving some day
I'm sure you'll end up building your own rotary too then!
Pretty cool set up Mark. I can see that being really fast and repeatable for jobs like that. Would love to see more laser work on wood projects and the setup process for those.
Thanks, will do!
Good breakdown of all of this rotary stuff! What a difference between the 2 you did.
Don't forget the checkbox!
Super cool, Mark! I hope Team Hopkins got one for all the team members ;)
I hope so too!
Looking at Rotoboss, and PIBURN LASER ROTARY ATTACHMENT 4.0. These are the only two I have come across that offer more flexibility when you need to engrave certain glassware, bottles.
Very nice video
once you have the rotary set up, how long does it take to do a tumbler?
Pretty interesting jig indeed, Mark! 😃
It's really useful!!! Thanks for the tutorial!
Stay safe there with your family! 🖖😊
Thanks, you too!
So cool! That rotary is awesome!
Mark, excellent content as always. As for suggestions: definitely keep the laser in your videos. Lets be honest, most of us will not have a laser quite as large as yours to start out, so specific settings are not a huge concern here. But how you incorporate the laser into your projects and the options for customization would be excellent. Your description of the booth you setup at the show was very interesting and some content on here showing that would be awesome. It's the hybrid approach that I'm shooting for: woodworking, lathe, laser, and ideas on how to mesh them together better. Well done!
Thanks for the thoughtful reply! I will work on trying to tie things together more.
Thanks for sharing the video, I would like to know where u put the cable from the rotary tool?
That’s a pretty slick rotary tool! I have a chuck style for mine which is decent but that offset leveling feature rocks!
Great video Mark! Thanks for sharing the process of getting it all set up. That’s a bad ass laser you have
Thanks Tim!
nice we have a 130 watt omtech in shop but im looking at a monport100 watt laser cutter and getting the y axis your vidoe is great im a newbee the omtech is a budy of mine im still learning my shopsabre 23
Good video! Great job taking us through the process! Nice laser setup!
Glad you enjoyed it!
Dumb question, but what is holding the cup down or does it just stay in place? I wish you would have shown that part.
Nice video. Appreciate the useful tips and your process. I recently just tried my first rotary with these same tumblers and am having difficulty leveling the product with the sculpfun rotary. Need a good proof to land a potential customer
Great video...I like your approach to instructing. Thanks.
Wow, now I want a rotary! Thank you for the explanation and tutorial Mark!
Several questions. What is the cost of the setup you have? How long does it take to run, say 100 mugs? Isn't there an easier way to do the setup like a placement jig or something?
I'm looking at something like $11k in all my laser stuff setup. You wouldn't have to get one as big as this if you just want to to cups though. Depending on the size of the logo, its taking me between 5 and 6 minutes to laser a single cup. I intend to keep playing with my settings to see if I can get that time down even more. I'm not sure how to make the process any easier - 1) square the jig - 2) Level the cup - 3) Focus. Once you do that for the first cup, you never have to touch it again.
A cost breakdown on the laser and it's uses would be great for people thinking of taking that plunge.
That's not a bad idea. I always breeze over the money side of it, which is odd since that's alway the information I'm looking for.
How to use this and cnc as tools in your/mine workflow in the shop.
Excellent presentation, Thank you for the clear demonstration, please my challenge is setting the focus right within the diameter of Tumbler..... I just need set up parameters. I am new to engraving on mugs and tumblers. Thank you
I'm looking for image distortion tips when working with tapered glasses/tumblers. (Example, circles appear egg shaped looking straight at them)
Great video, have you though of adding switchable magnetic clamps to the to rotary unit so you can secure it to the bed?
Outstanding video. I purchased a 100 watt CO2 laser from China to save money (about 1/2 the cost to US), but have had to rely on youtube for how to set up and run. Have you had any experience engraving glass plating or glass tumblers? Maybe a video? Thanks.
Nice video. I like those tumblers as well. Just curious what power your laser is? I'm using a Boss LS1630 100w
I have a rotor boss also and having problems with doing coffee mugs. I would appreciate any help
New subscriber. I have mine coming in May. Can not wait. Cheers from Indiana
Dude, awesome video. Answered so many questions!
It is really neat.
Awesome video Mark
That's completely different to the normal videos - but loved it - found the whole thing very interesting and would like to see more laser engraving. (as long as we still get the other ones too)
Glad you enjoyed it! I'll keep making more.
Could you mention the wattage of laser you are using, and if engraving stainless steel tumblers what marking spray and speed, power and scan gap settings for those tumblers as well
What machine are you using....it looks great! Also noticed you have a MAC, glad to know some are compatible!
Sweet video just wondering if you needed to use special glasses while using the laser? Like they have to wear while welding.
The shield on the lid is tinted - so that makes it pretty safe. I just wouldn't make a habit of staring at the brightest spot.
I have a rotor boss also having issue with coffee mugs. Any help would be appreciated
That's pretty slick.
It sure is!
Excellent Video! Looking around at various Co2 laser options, very impressed with setup you are using in the video. Would be very interested to learn more about unit you are using and your own thoughts having used it for some time. Great information, much appreciate!
What Watt is your laser and what settings did you use?
awesome video. I just started using the XTool D1 laser engraver. So far it has been an pretty good experience. Where did you buy your laser engraver? I think as my side hustle grows I might be interested in taking the plunge into something like yours.
I wouldn't mind seeing anything you do with it. And seeing what you do with the parts you cut out from it.
10/4
Thanks for this informative video! It is quite inspiring...
Good info.....Your machine has removable legs. Is it possible to disassemble the models without legs to get them through a door?
What is your maximum workpiece height? Considering buying a 2028 60 or 80w
Beautiful Job!! Lets see you make a model airplane kit with it out of wood. Kids will love it I bet!
Well that's a cool idea!
Good video...
Show more on making parts...
Thank's
How long did it actually take to engrave the logo?
Will this rotary work with any laser?
Hi Mark,
some constructive criticism here i hope you'll find useful as you usually aim for high production quality: Using what i assume is Auto-Gain on your recording device for Audio mostly creates some very irritating jumps in volume. A segment may start intensely loud and limited and then decline a good chunk until your voice is barely audible. This has been more obvious over the last year or so, i know it's kind of a safety/convenience thing but still a small advice: Rather set the gain to a lower, all-purpose setting with a simple overload protection/limiter and increase the volume & reduce your dynamics later - which will give you a consistent loudness over the duration of the entire video.
Great video in itself as always! Greetings =)
Mark,
I love the design and the rotary. I just received my X-Tool D1 diode (similar to what Drew has), I really want a Co2 laser though!!
That X-Tool will teach you a lot about lasers and do most anything you will ever need... it'll just do it slower and smaller.
@@GunflintDesigns Mark, if you ever want to do a comparison between the XTool machine and your big beast let me know and I can bring mine down. Might make for some interesting comparisons.
@@Vintauri That sounds like a good idea - we should plan on doing that!
Excellent video!
Thank you very much!
Is there a reason you used a raster image instead of a vector image?
Great Video, what wattage laser is that?
Great video. Very informative.
How long does it take to do each tumbler???
Excelente video🙂
How many watts is your laser?
I’ve been thinking about getting in to laser work for a while now, partly inspired by your conversations on the subject over at WBAT.
Will that rotary work with other brands of laser? Do you have a particular laser brand you recommend?
This rotary will work with lots of others, but they do need to be the high-power co2 style. The smaller more hobbyist style that Drew has won't work with this. My machine is a Bescutter, but I wouldn't necessarily recommend it because I have fought it a lot since day 1. Boss is a great brand, but a little more money. Same with Epilog.
@@GunflintDesigns Thanks! Appreciate the insight.
When I plug my rotary into the laser, it is controlling the wheels of the rotary and making the cup spin when I hit the Y to go up and down so I can’t put my laser over the cup 😅 What in the world am I doing wrong?
Well done.
Any tip my writing is literally lasering on top of its self ? 😩
Are you able to engrave glass such as pint beer mugs?
CO2 lasers can engrave glass but a fiber laser would be faster and better.
great video
Using metric made it so much easier for me to understand what you are doing. Welcome to the rest of the world. You should try using metric for everything as it makes everything so much simpler. 😉
(This is a joke btw. I know how challenging it would be to buy stock in imperial and try to use metric for everything else).
lol. I completely understand that metric is a better system. But I've spent several decades with imperial so it just comes naturally and switching would make my old man brain hurt!
@@GunflintDesigns I totally understand and get that. It's the equivalent of asking someone like me to start using imperial in every aspect of my life.
Great video nonetheless. I found it quite interesting and informative.
I am curious if you have any decals. Starting a collection and would be willing to buy a couple if you have any. Just hit me up when you have a moment. Ty. Sincerely WaynesWoodshed
I've got a few stickers left somewhere. Send me a message on Instagram and we will work something out.
Super interesting!
I mean, it's no multi-tool, small shop furniture... But it's really cool to see and dream about.
I saw a guy, at a show, that made artwork clock faces using "vinale records", installed the clock motors and sold the shit out of them. Wouldn't tell me how he cut them.
I think this laser would cut a record no problem. The problem might be I'm not sure if the exhaust would be toxic or not.
Wow what a nice vid. Now I want a laser. Don't tell my gf.
It'll be our secret.
Dude, SO COOL! Thanks for sharing. I will probably never do anything like this, but you never know. I just wish there was some #UNNECESSARYWALNUT in this project...
Haha, hard to attach walnut to cylindrical steel, but there are plenty of unnecessary walnut projects going through this thing.
hello
“All these Chinese lasers come in metric”
Well any place in the world uses metric except the US 😢
If you really want to impress me, you'll spin the tumbler by hand under the laser. Kids these days have machines doing everything for them!