DIY Expert Tips for Working with Thin wood Pieces

In this two part DIY video I show how to deal with thin pieces of wood...both making thin strips and planing thin pieces
Thin Strip Cutting jig 0:00
Planing thin pieces 2:25
Cutting thin wood strips on a table saw safely can be a nerve-wracking task, given the inherent risks involved. However, there's a simple and effective solution to mitigate these concerns - the thin strip cutting jig.
This ingenious device not only enhances safety but also offers ease of use. Crafted with simplicity in mind, the jig is quick to make, requiring minimal materials. Its key feature lies in its adjustable fence, allowing woodworkers to customize the width of the strips effortlessly. By moving the fence, you can achieve precision and consistency in strip dimensions without compromising safety. This smart solution not only provides peace of mind but also ensures that the woodworking process remains both efficient and enjoyable. So, next time you're faced with the challenge of cutting thin strips, let this jig be your go-to tool for a safer and more controlled experience in the workshop.
The second part deals with planing pieces that are thinner than the minimum accepted by the planer/thicknesser.
What happens when the wood pieces at hand are too thin for the planer's specified requirements? In this comprehensive guide, we explore innovative ways to utilize a thicknesser planer effectively for thin wood pieces.
One indispensable tool in a woodworker's arsenal is the thicknesser planer, a device designed to impart a smooth, uniform finish to wooden surfaces. However, what happens when the wood pieces at hand are too thin for the planer's specified requirements? In this comprehensive guide, we explore innovative ways to utilize a thicknesser planer effectively for thin wood pieces. ‪@woodywood3715‬

[@joanbauerdekanter2783]

I'd be a bit anxious using your first jig given any likelihood of kickback from supporting the lumber on perpendicular faces

[@woodywood3715]

HI,
You make a good point. I will put out another video with a kick back guard on it for that very concern. Appreciate the comment. Any comment on the second video trick?

[@joanbauerdekanter2783]

@@woodywood3715 the second one is good!
Usually folks get around the kickback problem on the first jig by placing a short stop block against the fence that you can then clear once you push the sled forward

[@ashokmoghe8035]

Your first jig is tricky as it has a potential to pinch the blade (although I do see a riving knife) and cause a kickback. The piece on the left side needs to be free and not held & pushed by the block you have glued to it. Just my $0.02. Take care.

[@woodywood3715]

Hi, apologies for late response as have been undergoing cancer treatment. Will come up with different version incorporating the feedback.

[@ashokmoghe8035]

@@woodywood3715 No worries Bro. Sorry to hear about your cancer. I wish you a speedy recovery and healthy life ahead.

[@woodywood3715]

@@ashokmoghe8035 Thank you so much