How to cover a steering-wheel in leather - Car upholstery
HTML-код
- Опубликовано: 14 июн 2024
- ✅Complete free course: www.cechaflo.com/courses
How cover a steering wheel into leather - Car upholstery
----------------------------------------
This video highlights some parts of a complete procedure to leather-wrap a two spoke steering-wheel in one piece, one junction. The hand sewing pattern shown in this video is 'cross stitching'.
If interested in learning 'how to' do it from the beginning to the end, please, check the links below for complete procedure:
How to leather cover a two-spoke steering wheel (Full Video)
👉www.cechaflo.com/courses
Leather wrapping a plastic cover of a steering wheel (Steering wheel horn)
👉 • Video (front piece)
👉 • Video (back piece)
I hope you find these videos useful!
César
00:00 Introduction
04:30 Leather marking
06:10 Cutting & trimming
07:10 Stitching marking
08:00 Making stitching holes
08:16 Doing reference marks
09:35 Leather cover alignment
11:25 Glueing procedure
12:50 Stitching procedure
20:20 Final - Авто/Мото
Excelente mi estimado profesor 👍
I don't know what it is but i could watch your content ages. The craftmanship is incredible and the delivery is so relaxing. Reminds me a little bit of watching Bob Ross.
The master is back, very glad to see you!
Hello CECHAFLO good day, thank you for your video of this occasion, circular upholstery of this important element of the car,,, it's time to enjoy and pay attention, thank you your friend Oscar.
Un hermoso trabajo, quedo excelente.
Gracias por su trabajo.
Sempre lavori esclusivi e come sempre nn posso fare altro che complimentarmi con sua eccellenza MAESTRO CECHAFLO!
Outstanding workmanship, the result looks nice. I often wondered how this was done, especially the line to cut the material into size to fit the round cross-section of the wheel. Thanks for sharing.
Increíble pulso a pura mano
Wow the patience, that looks amazing 👍😁
Tapestry master Congratulations!!!👏👏👏
Wonderful to see Your experienced hands doing such delicate tasks. The customer sees and touches your work every time the cars is moved. I think it is a special relationship between your hands and his/hers. Is the tool to keep the steering wheel in place available to buy? Thank you for your work and time to show us how to do it properly ❤
Thanks for appreciating the time and effort we put into making these videos possible and the craft itself.
Back in the old days there were no options for steering wheel holders so I did mine in stainless steel for my shop with the help of a lathe operator. Full pieces were worked in two different machines were used, lathe and milling machine. The cost was about $600 USD
Nowadays we have online options and we found these on upholstery forums:
retroretrims.co.uk/trimshop/en/35
www.ebay.co.uk/itm/166014952755
A drill press vise could also be useful, cost accessible and easy to find even on local hardware stores. The one I showed in the steering wheel course was $10 USD approx.
✅ ruclips.net/video/PcAmaou3F2g/видео.htmlsi=o-s6aAh63gBG2yWO&t=5331
www.amazon.com/ZGRM-Precision-Bench-Clamp-4-Inch/dp/B09T5WBT84/ref=sr_1_3?crid=H9ZGZX5CUWWB&keywords=drill+press+vise&qid=1697817431&sprefix=drill+press+vise%2Caps%2C321&sr=8-3
Amazing work sir good job
Excellent craftsmanship. If you were in South Jersey, I'd be paying you to redo the steering wheel on my 20 yr old AMG
You could send it to Mexico. It takes less than a week (FedEx, DHL,etc. shipping) to get here and it takes the same time to be back with you.
Awesome job 👏 👍🏿 🙌
Thanks for an educational video. Was a little surprised that glue was used as well.
A regular upholstery yellow glue(brushable)ruclips.net/video/o2xeezdF8Ss/видео.html
Thank you
تسلم ايدك يا معلم
The needle enters the hole on one side and pops through the other side. I know how it is going to go and I have nothing more to learn from it, yet I continue to watch. Why? Because watching an artisan perform their craft is SO SATISFYING!!
Perfect!
great. thanks for sharing
Muy buen trabajo
Great job, Master. Could you take a look at your steering wheel tightening machine????
عمل متقون
En que parte se encuentra amigo? Quizás estemos cerca y pueda llevarle un volante. Saludos y bendiciones.
Estamos localizados en la Ciudad de Guadalajara, Mexico.
Why not just cut a strip withe length of the outer circumference and width of cross sections circumference, with extra margin if needed.
It took me till the last 10 seconds to realize that i have that exact same steering wheel 😂
beautiful work! what kind of glue are you using?
The 'solvent based yellow glue' is a traditional adhesive or contact cement used in car upholstery and furniture.
It is the same glue used to stick formica as shown in the video about Upholstery Glues
✅ ruclips.net/video/o2xeezdF8Ss/видео.html
I started doing my interior on my single cab but the only panels I’m shying away from are the defrost vents and speaker vents and the b pillar, any tips before I start
Perhaps some pictures would help to understand much better to give an idea. cechaflo@gmail.com
¿Y que pasa con los airbags? Gran trabajo.
Felízmente este modelo de volante no tiene bolsa de aire. Generalmente los tapiceros no forran esa área donde va la bolsa de aire. En caso de llegar a forrar esa parte por pedido del cliente, tenemos que respetar las líneas de rompimiento. Se harían las uniones sólo con pegamento, sin coserlas para que la bolsa se libere en caso de accidente.
Si usamos el método que muestro en el video adjunto, se puede coser las piezas, siempre y cuando el dueño del carro autorize.
ruclips.net/video/UsFuFW6Yv3c/видео.html
Is there a specific quality of leather you recommend for steering wheels ?
It is a matter of personal taste. Regularly, automotive leathers are used for steering-wheels. As these leathers (corrected/top finished leathers) have two to three coats of transparent sealer/lacquer on their top surface to endure the daily rubbing of hands and UV sun rays. A wet coat is useful to clean it.
Can non-finished leathers (full grain aniline or semi aniline leathers) be used for steering wheels? Yes, provided you should be constantly conditioning and very meticulous to do a special cleaning. In other words, these leathers are considered more finesse and better quality than finished leathers. The only problem is we should be very careful with some grease or sweat on our hands; dirt, dust, sunrays, air conditioning, etc. We should be very careful about somebody who wants to touch your wheel, etc.
ruclips.net/video/wPw7SixQb7o/видео.html
Greetings and good afternoon I want to do tutorials on wallpapers can you please send me what I need for registration
what type of thread do you use? and what size?
Polyester thread size 207 www.thethreadexchange.com/miva/merchant.mvc?Screen=CTGY&Category_Code=polyester-thread-207
funny. i just watched your 3 hour video on this from a few years ago..
What thickness of leather do you recommend, 1mm?
From 1 mm to 1.2 to 1.3 These are standard thicknesses.
Cómo se llama el soporte o bace dónde lo sostiene al volante
Sujetador de volante
Dónde lo puedo comprar
@@user-sg4to6fy2n El mio lo mandé hacer con un tornero hace unos años. Cualquier tornero puede fabricar uno parecido.
Hay un link que anuncian este mecanismo. Es en Inglaterra, no se si hacen envíos fuera de este país.
retroretrims.co.uk/trimshop/en/upholstery-tools/87-steeringclamp.html
retroretrims.co.uk/trimshop/en/35
how long did it take you to finish the steering wheel? Greetings from Serbia!
Seven hours approx. Greetings and best wishes from Mexico!
@@Cechaflo Thanks a lot! all the best, lots of health.
Sorry, what exactly are you doing on 18:36 ?
I am hiding the threads beneath to make a knot.
👍🏿👍🏿👍🏿👍🏿👏👏👏👏👌🏼👌🏼👌🏼👌🏼
shop loc
Mexico