Truly a master of his craft. So much precision. So delicate with the attention to detail. Cechaflo, Thank you for sharing with us and showing us everything you do. I'm sure the 300k+ subscribers thank you as well.
Estas costuras decorativas se usan en algunos asientos de carro. Regularmente usan una máquina de poste con dos agujas. El pié de presión es especial para que se adapte a las dos agujas y a la forma del vivo. Un tornero curioso es capáz de hacer estas patas. La fresadora es la máquina que lo hace. Rellené con soldadura un pié de presion haciéndolo mas ancho y le hice una canal para que corra el vivo. En este video hago la prueba para saber si trabaja bien en recta y en curvas. El paso siguiente sería ir con un tornero y solcitarle que me fabrique una pata igual, a la perfección en acero. ruclips.net/video/ENPH2CTV9xo/видео.html La inspiración viene de una foto que me llamó la atención en el Hog Ring Forum de USA: www.thehogring.com/2012/06/06/photo-french-seam-piping/ ¡Muchas gracias por ver estos videos!
Спасибо за видио урок! Скажите пожалуйста, как называется белая лента? Спасибо... Восхищение вашей работой! Вместе с вами шила) очень понравилась лапка!!
I assume you are referring to the white backing strip. It is just a thin strip of vinyl. I cut it 1/2" of an inch wide. ruclips.net/video/xxEBaHlH-4w/видео.htmlsi=KRi_6916ZB1paLlq&t=763
Thank you for sharing your expertise. I would like to know what size thread you are using, what size needle and what stitch length. Your work is beautiful! TY
Thin thread 92 size to sew the pieces together (closing sewing) A thicker thread 138 for the decorative stitches on top. 18 needle size for the closing sewing and 22 needle size for the top stitches. For the closing sewing 3 mm long stitches. For the stitches on top 6 mm long. ruclips.net/video/dWHLT5bZvtc/видео.html
Здравствуйте. Постеснялся я пройти мимо этого видео так как много интересного . Смотрю видео и возникает вопрос ,смотрю дальше и вижу ответ! Здоровья вам !
Beautiful job! Reminds me of my brothers old seats we had made many years ago. Why is it not the entire front side? Why is it covering half of the front side?
It is a sample to test if the handmade foot I show in a previous video works well: ruclips.net/video/ENPH2CTV9xo/видео.html Besides it is an educational video to upholstery students to understand how this design would be approached by using a single needle, flat table sewing machine. The inspiration came from a Hog Ring Forum picture. www.thehogring.com/2012/06/06/photo-french-seam-piping/
Es solo una muestra para demostrar que el pié de presión acanalado sirve para bordes rectos y curvos. ruclips.net/video/ENPH2CTV9xo/видео.html Ya con esta prueba iré con un tornero para que me fabrique uno impecable en acero. En este video también compartimos varios tips muy útiles en tapicería. Uno que considero importante es cuando se espuman los paneles. El de parte cóncava se recomienda pegarlo sobre la espuma base para que se adapte a su forma. Lo ideal es pegar el vinil a la espuma con pegamento en spray. Lo mostraré mas adelante en un tema de partes cóncavas y convexas.
An education video though. Several useful upholstery tips included. It is also a sample test for the handmade foot I did for these stitches by using a single needle sewing machine.ruclips.net/video/ENPH2CTV9xo/видео.html These decorative twin stitches are used on real car seats. The inspiration came from a Hog Ring Forum picture: www.thehogring.com/2012/06/06/photo-french-seam-piping/ Thanks for watching!
Señor cechaflo, le hago una consulta, por casualidad, usted tuvo algún problema o accidente en el dedo índice de su mano derecha? He notado que siempre lo lleva levantado y casi no lo usa en un oficio en donde se sobreentiende que es una necesidad tener las manos en óptimas condiciones!!!. Ya lo creo que usted es un verdadero maestro y no soy ningún iluminado al notarlo pero si usted aún así lo hace tan bien, y con una lesión en su mano, es aun mas prodigioso su talento!!!... Por eso le pregunto!!! Realmente con profunda admiración y respeto!!! Lo saludo desde Argentina
Deasfortunadamente tuve una lesión en ese dedo índice. No fue en tapicería. Fué de mecánica. Es un trabajo adicional que conozco y es de reparación de maquinaria hidraúlica de servicio pesado.
The teeth could leave marks over the material (Kunstleder or delicate leather). It is much better a presser foot with no teeth(sand it off if necessary) Do some tests beforehand.
Is that a “cording” foot you use for the final French seam? . Very nicely done . Also very a that headliner foam you use for the under layer.? Thanks 🙏🏻
It is a rough sample I made to run over the piping cord. Related videos: ruclips.net/video/ENPH2CTV9xo/видео.html ruclips.net/video/t-0xatZVfVw/видео.html ruclips.net/video/ZUFp3Z3k2hQ/видео.html
I see that you use a Pfaff sewing machine, so I suppose you prefer Pfaff to other brands. Is there anything in particular that stands out for the Pfaff above others, say, Juki or Consew or Adler? Thank you!
I got this old machine still in good shape by chance. Consew, Juki, etc. in my opinion are at the same level. Perhaps I went for the Pfaff machine because my uncle who is also a car upholsterer bought a Pfaff 335, cylinder bed sewing machine around 60 years ago and it is still working out.
I've used Pfaff, consew and Adler. They are all good machines I prefer alder only because I own an Adler that I've had for 8 years. I got the machine from an old boss and he got the machine from his dad. It's an old machine and still running strong. But as I said nothing wrong with consew or pfaff.
There are special thin backing strips for sale. Stiff for straight seams and elastic for curved edges. I used a thin stretch vinyl for the seam backing. I cut the strip breadthwise along the stretch direction. It helps to give shape to rounded edges.
hola Maestro, tengo un problema con la 1245 en reverse creo que hago algo mal, muchas veces en reverse encuentro 3 hilos , 2 de arriba da top hilo , aveces se rompe la aguja, donde me equivoque? hello Maestro, I have a problem with the 1245 in reverse I think I make something wrong, often in reverse I find 3 thread wich 2 from the top sometimes it breaks needle, where am I wrong?
Trying to figure it out. Check first (the machine turned off and moving it by hand) if the needle makes stitches (with no thread) the same distance frontwards and backwards. When the reverse lever is lifted the moving is backwards and the needle point should meet the same holes made to the front. Verify if the machine is on time. No fast nor slow.
@@Cechaflo Thanks . i have checked then in the normal rotation look like perfect . when i hold reverse needle bar and small foot moving a litle bit to thr front and timing is not correct ..hook arrive too early ..isnt that weird?
You will find three threads when you stop the needle before the lockstitch is completed. Make sure that the needle has bottomed out and begun it's up stroke before you stop. Then you should only pull out a single top thread and a single bottom thread.
It is a binding strip placed on the reverse side. Those strips are sold in roll and ready for sale on some upholstery suppliers. In case of not getting it, we can do it by cutting strips of thin vinyl. The strip on the video looks white because it is the reverse side of the vinyl.
Those are called 'walking feet' or 'alternating feet' ruclips.net/video/U3HBXBDDKoo/видео.html (standard feet) ruclips.net/video/XjAcX1BGhi8/видео.html (piping feet)
Por internet (Amazon, Ebay, etc.) venden muchas patas para las máquinas de coser, pero no he visto hasta ahora una para el diseño que muestro en el video. Un tornero lo puede fabricar.
French Seam piping is used on car seats. www.thehogring.com/2012/06/06/photo-french-seam-piping/ As mentioned in the description this is a sample on how to approach these double stitches can be done by using a single needle sewing machine. Most of these videos are mostly devoted to upholstery students.
@@ny4583 No worries. I suppose you are referring to the previous second sewing I did at a distance of 8 mm. The first one was done at the very edge.It helps a lot to flatten the foamed edges to ease the final sewing process (1 cm from the edge). ruclips.net/video/KelUBPZCQzg/видео.html
@@ny4583 An overlock sewing machine replaces the procedure I show that is of flattening the edges. The LeatherSeats' car trimmer masterfully performs this process.ruclips.net/video/C3tcrZNKRCc/видео.html
@@Cechaflo i mean at the very edge stitching(1or 2mm from edge). Thank you i understood. I didn't try it because it is too much job. Now i will try, if it really helps i will stitch always like you. Thank you very much.
The ones in this video are hand made. ruclips.net/video/ENPH2CTV9xo/видео.html Other of these attachments are gotten on the internet, Amazon, Ebay, etc.
Use guides to improve your sewing. ruclips.net/video/8AT5qDjwMsY/видео.html You can get them on internet: Amazon, Ebay, etc. www.amazon.com/CKPSMS-Brand-Left-Spring-Side-4MM/dp/B07QZH42W1?th=1
I suppose you are referring to the blue automotive vinyl I am using for the panels. Automotive yellow vinyl for the piping/welting strip. The foamed fabric(backing) is a 4 mm thick headliner material. The backing strip to reinforce the french seams is also automotive stretch vinyl but slightly thinner. I put it on its reverse.
@@my95buick ruclips.net/video/xxEBaHlH-4w/видео.html I misunderstood, sorry. That material is cardstockpaper used to make the patterns. A drawing is done on the foam base, then this paper is attached in order to get the molds. These procedures are the same taught in our basic courses and also shown in several youtube videos. www.cechaflo.com/courses The same molding technique is applied on different car seat designs. ruclips.net/video/pHjUuOPldH4/видео.html
Do not glue your panels to the foam, if your location marks all align up the cover will pull out perfectly given the shape. Glued panels cannot be steamed or heated as you will reset the glue.
amigo,usted sabe lo que se hace, pero no entiendo como no se ve sacar la simetria del asiento,demasiada parafernalia para coser tantas piezas,el vivo nunca es pegado en raras excepciones,y no se ve terminado el asiento al completo en el video,segun veo mucho tiempo necesita para hacernun trabajo tan laborioso como ese,si lo cobran bien y se lo pagan perfecto,aun asi es buen trabajo
As this video is only educational and its main purpuse is to teach some upholstery techniques not worth using a luxiry material, could also notice the same foam cushion is used on several previous videos, that's what I have at hand for the demonstrations.
Truly a master of his craft. So much precision. So delicate with the attention to detail. Cechaflo, Thank you for sharing with us and showing us everything you do. I'm sure the 300k+ subscribers thank you as well.
This is a lost art, You can feel the quality in every stitch, Whole new class of workmanship. Pure pleasure to see a lost art with no short cuts
Sve sto radite je prava umetnost! Pozdrav iz Srbije!
what a phenomenal job, you showed master technics that I believe few noticed
Спасибо, что делитесь своим опытом, вы настоящий мастер, учусь по вашим видео 👍👍👍
The best upholstery i have seen. Mark Tennessee
Great VDO to show technical knowledge.
Super fan de usted Maestro como siempre demostrando porque es el mejor! Gracias por compartir! Excelente trabajo!
Muchísimas Gracias!!! Excelente!!! Mi admiración por su trabajo!!!!
Que bello trabajo!!! Estaría horas mirando este video!!! Que tipo de máquina me Recomendaría???gracias
Thank you sir for this video. I think the product is beautiful.
Absolutely a master.
Além de excelente profissional, seus vídeo são muito bem elaborados... não deixando nenhuma dúvida para o expectador! Muito obrigado!
It is just a simple sample but it is full of tips I am sharing. Do not forget to read the video description.
Hello, I can I speak with you?
amazing work
Tolle Paspoillier-Arbeit ! 👌👌
Un acabado totalmente perfecto. Muchas gracias por compartirlo con nosotros! 👏👏👏
Desde Argentina!! Muchísimas gracias!! Maestro!!
Estas costuras decorativas se usan en algunos asientos de carro. Regularmente usan una máquina de poste con dos agujas. El pié de presión es especial para que se adapte a las dos agujas y a la forma del vivo.
Un tornero curioso es capáz de hacer estas patas. La fresadora es la máquina que lo hace.
Rellené con soldadura un pié de presion haciéndolo mas ancho y le hice una canal para que corra el vivo. En este video hago la prueba para saber si trabaja bien en recta y en curvas. El paso siguiente sería ir con un tornero y solcitarle que me fabrique una pata igual, a la perfección en acero. ruclips.net/video/ENPH2CTV9xo/видео.html
La inspiración viene de una foto que me llamó la atención en el Hog Ring Forum de USA: www.thehogring.com/2012/06/06/photo-french-seam-piping/
¡Muchas gracias por ver estos videos!
Спасибо за видио урок! Скажите пожалуйста, как называется белая лента? Спасибо... Восхищение вашей работой! Вместе с вами шила) очень понравилась лапка!!
I assume you are referring to the white backing strip. It is just a thin strip of vinyl. I cut it 1/2" of an inch wide.
ruclips.net/video/xxEBaHlH-4w/видео.htmlsi=KRi_6916ZB1paLlq&t=763
Você é um profissional acima da média, na verdade ainda não vi nenhum profissional tão bom como você, há quanto tempo você trabalha com estofados?
I started out in the late seventies.
Tolles Video. Das hat mir sehr geholfen.
Grüße aus Bayern.
Thank you for sharing your expertise. I would like to know what size thread you are using, what size needle and what stitch length. Your work is beautiful! TY
Thin thread 92 size to sew the pieces together (closing sewing) A thicker thread 138 for the decorative stitches on top.
18 needle size for the closing sewing and 22 needle size for the top stitches.
For the closing sewing 3 mm long stitches. For the stitches on top 6 mm long.
ruclips.net/video/dWHLT5bZvtc/видео.html
Здравствуйте. Постеснялся я пройти мимо этого видео так как много интересного . Смотрю видео и возникает вопрос ,смотрю дальше и вижу ответ! Здоровья вам !
Beautiful job! Reminds me of my brothers old seats we had made many years ago.
Why is it not the entire front side? Why is it covering half of the front side?
It is a sample to test if the handmade foot I show in a previous video works well:
ruclips.net/video/ENPH2CTV9xo/видео.html
Besides it is an educational video to upholstery students to understand how this design would be approached by using a single needle, flat table sewing machine.
The inspiration came from a Hog Ring Forum picture.
www.thehogring.com/2012/06/06/photo-french-seam-piping/
Excelente video mi amigo, te felicito 👏🏻👏🏻👏🏻👏🏻 un trabajo impecable. Abrazo GRANDE 🍷
Es solo una muestra para demostrar que el pié de presión acanalado sirve para bordes rectos y curvos. ruclips.net/video/ENPH2CTV9xo/видео.html
Ya con esta prueba iré con un tornero para que me fabrique uno impecable en acero.
En este video también compartimos varios tips muy útiles en tapicería. Uno que considero importante es cuando se espuman los paneles. El de parte cóncava se recomienda pegarlo sobre la espuma base para que se adapte a su forma. Lo ideal es pegar el vinil a la espuma con pegamento en spray. Lo mostraré mas adelante en un tema de partes cóncavas y convexas.
Great work 👍 Weiter so 👍 Thank you so much 👍
An education video though. Several useful upholstery tips included. It is also a sample test for the handmade foot I did for these stitches by using a single needle sewing machine.ruclips.net/video/ENPH2CTV9xo/видео.html
These decorative twin stitches are used on real car seats. The inspiration came from a Hog Ring Forum picture: www.thehogring.com/2012/06/06/photo-french-seam-piping/
Thanks for watching!
Superb tutorial
Señor cechaflo, le hago una consulta, por casualidad, usted tuvo algún problema o accidente en el dedo índice de su mano derecha? He notado que siempre lo lleva levantado y casi no lo usa en un oficio en donde se sobreentiende que es una necesidad tener las manos en óptimas condiciones!!!. Ya lo creo que usted es un verdadero maestro y no soy ningún iluminado al notarlo pero si usted aún así lo hace tan bien, y con una lesión en su mano, es aun mas prodigioso su talento!!!... Por eso le pregunto!!! Realmente con profunda admiración y respeto!!! Lo saludo desde Argentina
Deasfortunadamente tuve una lesión en ese dedo índice. No fue en tapicería. Fué de mecánica. Es un trabajo adicional que conozco y es de reparación de maquinaria hidraúlica de servicio pesado.
Durch und durch tolle Videos! Eine Frage, nähst du das Kunstleder mit Füßen mit oder ohne Zähnen? Danke im Voraus und Grüße aus Wien
The teeth could leave marks over the material (Kunstleder or delicate leather). It is much better a presser foot with no teeth(sand it off if necessary)
Do some tests beforehand.
Спасибо, это сделано великолепно ))
Is that a “cording” foot you use for the final French seam? . Very nicely done . Also very a that headliner foam you use for the under layer.? Thanks 🙏🏻
It is a rough sample I made to run over the piping cord.
Related videos:
ruclips.net/video/ENPH2CTV9xo/видео.html
ruclips.net/video/t-0xatZVfVw/видео.html
ruclips.net/video/ZUFp3Z3k2hQ/видео.html
Amo seus ensinamentos, aprendo bastante.. muito obrigada.
Maestro !? Que material usa para la franja del reverso ? Eso es lino ?
Me encanto como le quedo !
Saludos desde Buenos Aires !
Para el refuerzo usé un vinyl mas delgado estirable. Se cortó en ese sentido a lo largo de la tira para formar la parte curva mas fácilmente.
Thank you
I see that you use a Pfaff sewing machine, so I suppose you prefer Pfaff to other brands. Is there anything in particular that stands out for the Pfaff above others, say, Juki or Consew or Adler? Thank you!
I got this old machine still in good shape by chance. Consew, Juki, etc. in my opinion are at the same level. Perhaps I went for the Pfaff machine because my uncle who is also a car upholsterer bought a Pfaff 335, cylinder bed sewing machine around 60 years ago and it is still working out.
I've used Pfaff, consew and Adler. They are all good machines I prefer alder only because I own an Adler that I've had for 8 years.
I got the machine from an old boss and he got the machine from his dad. It's an old machine and still running strong. But as I said nothing wrong with consew or pfaff.
Super ❤❤ merci
Donde tiene su taller? Saludos desde Perris California
En Mexico. Un cordial saludo también.
What type of material is used for the french seam backing (on the back side of the seam)?
There are special thin backing strips for sale. Stiff for straight seams and elastic for curved edges.
I used a thin stretch vinyl for the seam backing. I cut the strip breadthwise along the stretch direction. It helps to give shape to rounded edges.
hola Maestro, tengo un problema con la 1245 en reverse creo que hago algo mal, muchas veces en reverse encuentro 3 hilos , 2 de arriba da top hilo , aveces se rompe la aguja, donde me equivoque?
hello Maestro, I have a problem with the 1245 in reverse I think I make something wrong, often in reverse I find 3 thread wich 2 from the top sometimes it breaks needle, where am I wrong?
Trying to figure it out. Check first (the machine turned off and moving it by hand) if the needle makes stitches (with no thread) the same distance frontwards and backwards. When the reverse lever is lifted the moving is backwards and the needle point should meet the same holes made to the front.
Verify if the machine is on time. No fast nor slow.
@@Cechaflo Thanks . i have checked then in the normal rotation look like perfect . when i hold reverse needle bar and small foot moving a litle bit to thr front and timing is not correct ..hook arrive too early ..isnt that weird?
@@maxtur6982 Trying to figure it out with no success, yet.
You will find three threads when you stop the needle before the lockstitch is completed. Make sure that the needle has bottomed out and begun it's up stroke before you stop. Then you should only pull out a single top thread and a single bottom thread.
What do you call the strip under the seem? And what material is best thank you
It is a binding strip placed on the reverse side. Those strips are sold in roll and ready for sale on some upholstery suppliers. In case of not getting it, we can do it by cutting strips of thin vinyl. The strip on the video looks white because it is the reverse side of the vinyl.
@@Cechaflo thank you very much
great job
What is the mechanism with two walking feet of a sewing machine called?
Those are called 'walking feet' or 'alternating feet'
ruclips.net/video/U3HBXBDDKoo/видео.html (standard feet)
ruclips.net/video/XjAcX1BGhi8/видео.html (piping feet)
@@Cechaflo Thank you! I am a beginner in this business. I'm very interested!!
so schön !!!!
Buenas esas patas que utiliza donde se pueden comprar . Gracias
Por internet (Amazon, Ebay, etc.) venden muchas patas para las máquinas de coser, pero no he visto hasta ahora una para el diseño que muestro en el video.
Un tornero lo puede fabricar.
@@Cechaflo gracias
Just do it with the material a lot of fanning around
Great 👍
Hello. What for did you make stitches at the edges of material?
French Seam piping is used on car seats.
www.thehogring.com/2012/06/06/photo-french-seam-piping/
As mentioned in the description this is a sample on how to approach these double stitches can be done by using a single needle sewing machine.
Most of these videos are mostly devoted to upholstery students.
@@Cechaflo Sorry. No, i mean what for did stitch foam to material at the edges. Because you anyway will stitch at the center (1cm)
@@ny4583 No worries. I suppose you are referring to the previous second sewing I did at a distance of 8 mm. The first one was done at the very edge.It helps a lot to flatten the foamed edges to ease the final sewing process (1 cm from the edge). ruclips.net/video/KelUBPZCQzg/видео.html
@@ny4583 An overlock sewing machine replaces the procedure I show that is of flattening the edges. The LeatherSeats' car trimmer masterfully performs this process.ruclips.net/video/C3tcrZNKRCc/видео.html
@@Cechaflo i mean at the very edge stitching(1or 2mm from edge). Thank you i understood. I didn't try it because it is too much job. Now i will try, if it really helps i will stitch always like you. Thank you very much.
Where can I get these foots i have a singer 111w155
The ones in this video are hand made.
ruclips.net/video/ENPH2CTV9xo/видео.html
Other of these attachments are gotten on the internet, Amazon, Ebay, etc.
Tenho muita dificuldade na costura dupla quero a Judá sua porfavor
Use guides to improve your sewing.
ruclips.net/video/8AT5qDjwMsY/видео.html
You can get them on internet: Amazon, Ebay, etc.
www.amazon.com/CKPSMS-Brand-Left-Spring-Side-4MM/dp/B07QZH42W1?th=1
Which needle do u use ?
140=22
very good
ما هو قياس الخيط الذي تخيط به
Thin standard upholstery thread 92 size to join pieces. 138 hread size for decorative top stitches.
What fabric do you use to make the pattern?
I suppose you are referring to the blue automotive vinyl I am using for the panels. Automotive yellow vinyl for the piping/welting strip.
The foamed fabric(backing) is a 4 mm thick headliner material. The backing strip to reinforce the french seams is also automotive stretch vinyl but slightly thinner. I put it on its reverse.
@@Cechaflo no the white stuff you pin to the foam
@@my95buick ruclips.net/video/xxEBaHlH-4w/видео.html I misunderstood, sorry. That material is cardstockpaper used to make the patterns. A drawing is done on the foam base, then this paper is attached in order to get the molds.
These procedures are the same taught in our basic courses and also shown in several youtube videos.
www.cechaflo.com/courses
The same molding technique is applied on different car seat designs. ruclips.net/video/pHjUuOPldH4/видео.html
@@Cechaflo OK thanks. I always assumed it was a type of fabric
@@my95buick It looks like though.
Dove la trovo la bordatura e la tubazione .grazie
Upholstery stores sell these products.
Use spray adhesive
fantastique
Do not glue your panels to the foam, if your location marks all align up the cover will pull out perfectly given the shape. Glued panels cannot be steamed or heated as you will reset the glue.
amigo,usted sabe lo que se hace, pero no entiendo como no se ve sacar la simetria del asiento,demasiada parafernalia para coser tantas piezas,el vivo nunca es pegado en raras excepciones,y no se ve terminado el asiento al completo en el video,segun veo mucho tiempo necesita para hacernun trabajo tan laborioso como ese,si lo cobran bien y se lo pagan perfecto,aun asi es buen trabajo
Good work done with the cheapest awful material without any comfort to sit on especially in hot summer time.
As this video is only educational and its main purpuse is to teach some upholstery techniques not worth using a luxiry material, could also notice the same foam cushion is used on several previous videos, that's what I have at hand for the demonstrations.
Im good upholstery work for me your day off work
Please do upholstery work in my school or Anna wood work I’m do
اسلام علیکم سر میں بھی پاکستانی ہوں اور یہ گاڑیوں کی سٹیچنگ دبئی میں کر رہا ہوں مجھے آپ کنٹری میں ویزا مل جائے گا
красота
👍👍🙏🙏👍👍
🤔🤔🤔🤔 😀😀😀😀 👍👍👍👍 👏👏👏👏
Show
Vuelta
Desde Argentina!! Muchísimas gracias!! Maestro!!
Thank you