Excellent! I was using a small screwdriver to push on the shaft while I pulled the props. The Tinyhawk II comes equipped with 4-bladed props, but I had to pull them to remove a big wad of hair all four motors reeled in!
Thank you, sir! I've just went to pull the props off my Tinyhawk II thinking it would be simple and it stumped me! Twisting and using the pitch of the props to pop it off works! Brilliant! lol
@@FrequentFlyerRChey I have a question what size props are those and we’re can I get them from I just got the tiny hawk 2 in the mail yesterday the props broke on my fist flight 😂 thank you for your videos flying drones have changed my life big bro thanks 🙏🏾
Stock runs a bit tighter to the frame by the looks of it, which may yield more efficient power in the end. Those newer ones seem to be quite a bit shorter yet have a more aggressive pitch to them.
Wow man ,, this just made me realize why I couldnt flip my gt with emax avan Blur props . I bet all Emax avan have no opposite thrust vector ..... Really awesome you noticed this feature . I really really ,, did I say really like Emax Blurs on my little birds ,, They are indestructible little props . which is the downside as really bad crashes can strip out the prop nuts but theres 4 holes so whatever.... yes I like exax props but always end up digging holes and stripping out the prop nuts whatever using turtle mode with it and I pretty much stopped using it..
I was rather skeptical at first. After watching you doing it on the video I thought no way will that work on my Tiny Hawk 2, but it did. Realy Easily too. Thank you so much, game changer!!!
Brilliant! It took me watching it two or three times to figure out what was really happening, haha. My fault for not paying proper attention I guess. I R SMRT.
Thought I was gonna break mine stock props were so hard to remove even the new ones are to remove I went from three to four blade I think it's a big difference
The alternative props now stick out way below the frame to catch and hit a bunch of crap. Also, without the camber of the original prop, upright flight is less efficient. Lastly, as others have pointed out, you need to change the setting in BF to only turtle with two motors.
Well now, Emax has responded with 4 bladed props that works with turtle mode. However, what setting in Betaflight can be changed to turtle mode with 2 motors? I have heard people mention that only 2 motors should turn but never has anyone showed or explained how.. show and prove. Also, the battery holder raises the props well up off the ground so there is no problem with props hitting the ground. Lastly, the Racerstar 1535 just happens to be a less efficient prop. Although, the LDARC 1535 Tri-Props don't have a "camber" and is as efficient as the stock props if not better..
Nice video mate. I have the same quad but the issue with my quad is that it feels underpowered and it eats up the battery voltage really fast, like a small punch will drop the voltage from 3.9 to 3.2 and after some time the voltage will get back but there is some issue with the settings I assume. Can you please tell me what it could be? Also can you please share the settings of your tinyhawk ?
Could definitely be the battery. May need to set your voltage warning a little higher for your new batteries. Flying the quad past the LVC warning can damage the batteries
So I have a original thawk but damn it's weak and can't do split s without death wobble.. what should I do? Has 4blade and also every crash a prop pops off. To bad I didn't spend money on a toothpick beushless instead of this...so maybe a humquad hx100?
Nice bro. You did convert me, having watched the your 2 S review I decided to buy the 1 S to enter at beginner level as I fly the bigger drones but I’m new to those also. Thanks for sharing bro.
Pusher motors or props.. That seems superior to me. But I guess it has to be on a frame like this or you would always be landing and digging in with your props.. maybe that is why most quads don't?
@@FrequentFlyerRC Well then I can't wait to experiment with it myself. I'm new to quads and I am very impressed with your flying, so I'll be watching/listening to your stuff.
Another reason for wanting to remove the prop is if you put the wrong one on the wrong motor... e.g. should have been clockwise but was anti. Ooops. Your twisting method worked much better than an alternative 'press on the shaft with something pointy whilst pulling on the prop with your fingers' method.
I think it flies better with the Avan Tinyhawk Props that come stock. The four bladed props have more draw but turtle mode works with it. Guess it comes down to whether you want turtle mode or not. Thanks for checking 👍🏽
Awesome information, although I don't have this bird. Looks really cool but I'm still a little undecided about getting one. How do you like it compared to (I know there's a difference in battery power...) the ET100? BTW, Banggood has the original ET100 on flash sale for $89.99. Thanks for sharing this information bro, great job!!!
I just purchased the tiny hawk and it is my first ever drone / quad and I have no goggles or transmitter. Can someone please tell me the best goggles and transmitter / controller to purchase that is compatible with the tiny hawk? Thanks 😊
You have several transmiter(radio)/receiver(goes on the quad) protocols like Frsky or Flysky and others. A Frsky RX will only work with a Frsky TX and a Flysky RX will only work with a Flysky TX. RX=Receiver, TX=transmiter.
@@helixinwonderland8938 ok thanks for the clarification. So I have purchased the tiny hawk and say I go with a frsky transmitter, will the transmitter come with a receiver that I need to put into the tiny hawk? I don't understand why they don't offer transmitters with the quads for people who are new to all of this.
Dude this just came out and you are already "Chop Shop'in" it...lol You're awesome, but then you know that already and you fly like a bat outta hell...not that I know what that might be like but I can imagine well enough. Happy Flying FF!
Does it fly faster/slower, also how does it affect flight characteristics, and flight time. You had to know you were starting a whole thread of varying questions when you switched props, lol
So far, I haven't found a prop that flies it better or more efficient than the stock Avans. These props are slower, cut flight time but works with turtle mode. I was gonna try cut down Avan 2 inch quad-blades with 2 blades removed resulting in bi-blades but plugged in a 2S battery first and killed the little bird! 🤣😂🤣😆
@@FrequentFlyerRC that sux, but3. amp esc's would have pulled over 12 amps, I think. It six that turtle mode doesn't work with stock props, I think that hub has something to do with it, but mine isn't here, so just guessing.
So now the props are sticking out of the bottom and hitting the floor? Turtle mode doesn't look like it is working right, it should just spin 2 motors not all four!?!?!
I didn't touch anything, that's the way it's working out of box. Also, the props don't touch the floor, there is a battery bay that lifts it up and the front and back edges would have cleared it if the battery and bay saw not there..
It's a tunable feature in betaflight and emax set it to 20% mix. Its to push/pull at the same time and it's extremely helpful for brushless whoops that just slide around when trying to flip back over.
Dang, I have some of those little orange bull nose props, but I seriously doubt I will ever be able to remove one of these tiny props from my Tinyhawk without wrecking something!
Frequent Flyer RC I love it. I feel I need to change up the acro rates a bit but angle is great. Haven’t messed with horizon mode much yet but overall it definitely helps wake up the tinyhawk. I only flew one pack with it all stock and immediately went to pmb. I couldn’t fly stock rates at all. Lol.
theses spokes should have been thickened up at the connections points on that frame and they are absolutely the weakest point on this quad. its a shame. hope they will sell frames for cheap. or even update it if it becomes a huge issue.
So frustrating every video I look up on prop removal only shows these baby drones that you pop the props off of. Nothing shows videos on how to remove props from a drone that requires a tool just got my drone 2.5 inch tinyhawk 2 freestyle and I have no idea what tool you use to remove them and nothing online or RUclips says how. It's like it's a secret 😂
I guess I can try to squeeze in a video on how to remove props for brushless drones but I feel like I have already done a video on it or at least reviewed tools that are made to remove the props. I think I have 3 different tools made for that. 👌🏿
I had to remove the motors and literally cut them off. Even after cut, they still weren't coming out... literally glued to the motor. I had to use 2 pliers and grab 2 of the wings after I cut them all the way thru and pull them til the plastic broke to get them off. What the actual fuck...
Not true, this was added to help when brushless whoops came out. You can adjust the percentage in betaflight (emax set it to 20%), but what it does is push/pull at the same time to try and help plant the one side while it attempts to lift the other. It works well on a lot of whoops that wouldn't normally be able to flip with the standard setting.
That is not how you do it, lol. Just as written in the instructions of the product you use the supplied screwdriver to press against the metal plate that holds the motor, that makes removing props very easy without risk of damageing the frame
Frequent Flyer RC I’ve changed them countless times. If you do it the way they describe it the props just come off quickly. I think you still risk breaking it that way. By the way there are turtle mode props that properly fit on the emax motor, I got mine from amazon.
@@FrequentFlyerRC if you do it a lot it will ruin your sticks spring elasticity... I'm usually on a low budget so I prefer to keep the quality of my stuff the best I can... I think it happened to my dad cause he told me about it...
![☀ Затюненый вуп - летает БОЖЕСТВЕННО! Новый мелкий ястреб. [Emax Tinyhawk II Freestyle]](http://i.ytimg.com/vi/XzIVWAspEr8/mqdefault.jpg)
![☀ Затюненый вуп - летает БОЖЕСТВЕННО! Новый мелкий ястреб. [Emax Tinyhawk II Freestyle]](/img/tr.png)
Excellent! I was using a small screwdriver to push on the shaft while I pulled the props. The Tinyhawk II comes equipped with 4-bladed props, but I had to pull them to remove a big wad of hair all four motors reeled in!
Gotta watch for that hair for sure!
@@FrequentFlyerRC It's awful. Wife was wondering why I was moving all of the furniture and vacuuming underneath!
I love your videos, but my god this technique is utter genius. Thankyou for sharing!
Happy to see it seemingly works for you too! Thanks again for watching👍🏽
Thank you, sir! I've just went to pull the props off my Tinyhawk II thinking it would be simple and it stumped me! Twisting and using the pitch of the props to pop it off works! Brilliant! lol
Thanks man, happy to be of help 👍🏿
@@FrequentFlyerRChey I have a question what size props are those and we’re can I get them from I just got the tiny hawk 2 in the mail yesterday the props broke on my fist flight 😂 thank you for your videos flying drones have changed my life big bro thanks 🙏🏾
Stock runs a bit tighter to the frame by the looks of it, which may yield more efficient power in the end. Those newer ones seem to be quite a bit shorter yet have a more aggressive pitch to them.
Stock prop is just a better prop indeed.
Sir there are no videos on how to bind the jumper v2 transmitter to the tiney hawk can you make one
Wow man ,, this just made me realize why I couldnt flip my gt with emax avan Blur props . I bet all Emax avan have no opposite thrust vector ..... Really awesome you noticed this feature . I really really ,, did I say really like Emax Blurs on my little birds ,, They are indestructible little props . which is the downside as really bad crashes can strip out the prop nuts but theres 4 holes so whatever.... yes I like exax props but always end up digging holes and stripping out the prop nuts whatever using turtle mode with it and I pretty much stopped using it..
I was rather skeptical at first. After watching you doing it on the video I thought no way will that work on my Tiny Hawk 2, but it did. Realy Easily too. Thank you so much, game changer!!!
Thanks man! Indeed it makes it a little easier 👍🏽
Brilliant! It took me watching it two or three times to figure out what was really happening, haha. My fault for not paying proper attention I guess. I R SMRT.
Thought I was gonna break mine stock props were so hard to remove even the new ones are to remove I went from three to four blade I think it's a big difference
Yup but beware... The 4 bladed props are even harder to remove!
Nice one. Thanks
Thanks man
What’s the difference between 2 and 4 blade props? And which is better
4 blade more stable, 2 blade in most cases gives more flight time
The alternative props now stick out way below the frame to catch and hit a bunch of crap. Also, without the camber of the original prop, upright flight is less efficient. Lastly, as others have pointed out, you need to change the setting in BF to only turtle with two motors.
Well now, Emax has responded with 4 bladed props that works with turtle mode.
However, what setting in Betaflight can be changed to turtle mode with 2 motors? I have heard people mention that only 2 motors should turn but never has anyone showed or explained how.. show and prove. Also, the battery holder raises the props well up off the ground so there is no problem with props hitting the ground. Lastly, the Racerstar 1535 just happens to be a less efficient prop. Although, the LDARC 1535 Tri-Props don't have a "camber" and is as efficient as the stock props if not better..
Thank you! You're the only one that has a good easy solution!
Thank YOU for watching and always a pleasure to help👍🏿
Nice video mate. I have the same quad but the issue with my quad is that it feels underpowered and it eats up the battery voltage really fast, like a small punch will drop the voltage from 3.9 to 3.2 and after some time the voltage will get back but there is some issue with the settings I assume. Can you please tell me what it could be? Also can you please share the settings of your tinyhawk ?
Are you using GnB batteries?
@@FrequentFlyerRC Nope, am using ministar 1s 75c batteries.
Could definitely be the battery. May need to set your voltage warning a little higher for your new batteries. Flying the quad past the LVC warning can damage the batteries
Nice video...sorry, do you can tell me the diameter of shaft..?
Sorry not sure but I think it's thicker than 1.5... Its not a standard sized shaft, very thick
Do you think it could work with the stock props if you change turtle mode in betaflight to only use 2 motors instead of all four to flip it?
Didn't know you can do that but your guess is as good as mine!
nice. . . but what about fly time with this new props?
Haven't fully tested that but usually an extra blade to turn means less fly time.
What transmitter are you using the one that came.with.it is too small for my hands
I use the Taranis and Devo 10, I never had the ready to fly kit for it.
So I have a original thawk but damn it's weak and can't do split s without death wobble.. what should I do? Has 4blade and also every crash a prop pops off. To bad I didn't spend money on a toothpick beushless instead of this...so maybe a humquad hx100?
The 2S upgrade is a little better. But this one should be able to split S no problem.
Try new batteries.
Great video! Helped me immensely! The other reason to take the props off is to run “props out.”
Thanks man, happy to be of help
Nice bro. You did convert me, having watched the your 2 S review I decided to buy the 1 S to enter at beginner level as I fly the bigger drones but I’m new to those also. Thanks for sharing bro.
Cool to hear! 👍🏽
Hi FF, can you tell me if it's DSMX (Spektrum) compatible? Thanks
Yes it is, you can find a serial Rx and 3.3v pad on the bottom for DSMX receivers 👍🏽
How do you switch it into Turtle mode? None of the instructions I got with my Emax tiny Hawk talks about Turtle mode
You can connect to Betaflight and set turtle mode up to a switch. Try auxiliary switch 3 if you have switched set up already on the transmitter
Have you tried the blade fpv
Which one?
@@FrequentFlyerRC inductrix +
Haven't tried that one. Blade makes fun products for sure though
Pusher motors or props.. That seems superior to me. But I guess it has to be on a frame like this or you would always be landing and digging in with your props.. maybe that is why most quads don't?
Definitely a difference in dynamics. Whole different feel. I personally like it but can't say if it's truly better..
@@FrequentFlyerRC Well then I can't wait to experiment with it myself. I'm new to quads and I am very impressed with your flying, so I'll be watching/listening to your stuff.
Thank you for sharing this method of removing the props. You have saved me a lot of frustration.
Happy to be of help
Major props for that prop removal technique. Genius, and works like a charm. Thanks!
Thanks man! 👌🏽
Hello, can you help me with what kind of connector does the battery have (the name)?
PH2.0 "Power Whoop"
Nice vid Freq! I'm still waiting on mine. I'll definitely bookmark this vid for reference.
Thanks man 👍🏽
good job man!! I had same idea to implement as soon as mine arrives... try diff. props ;) You're the man!
Thanks man! LOL
Another reason for wanting to remove the prop is if you put the wrong one on the wrong motor... e.g. should have been clockwise but was anti. Ooops. Your twisting method worked much better than an alternative 'press on the shaft with something pointy whilst pulling on the prop with your fingers' method.
Happy to be of help! Thanks for watching man 👍🏿
Saw someone with the 4 bladed turtle ok props version.
I have not found them.
Me neither but the LDARC props turtle mode too
I so gotta get me one! I don’t do punch outs so as long as they fly pretty fast horizontally I’m good. Thanks!
I think it flies better with the Avan Tinyhawk Props that come stock. The four bladed props have more draw but turtle mode works with it. Guess it comes down to whether you want turtle mode or not. Thanks for checking 👍🏽
Awesome information, although I don't have this bird. Looks really cool but I'm still a little undecided about getting one. How do you like it compared to (I know there's a difference in battery power...) the ET100? BTW, Banggood has the original ET100 on flash sale for $89.99. Thanks for sharing this information bro, great job!!!
I love the ET100 but it's heavier, this is a true indoor quad!
There are now 4 bladed evan props just like the stock props, but they work with turtle mode.
I know but you can't get them anywhere and Emax hasn't sent me any..
Great video and great analysis of the problem. I'm amazed that the manufacturer didn't catch that during pre-release testing.
Liked. Already subbed.
Nice, thanks man! Emax is great though!
Now that turtle props are available from emax, this video is extra helpful.
Happy to be of help!
Just had to do this... and you really helped me! Thanks!! They’re on tight, man!!! Sheesh
I could barely get this to work on the new Tinyhawk S, in fact I think I gave up.. The props are even tighter!
Frequent Flyer RC Wow!
I just purchased the tiny hawk and it is my first ever drone / quad and I have no goggles or transmitter. Can someone please tell me the best goggles and transmitter / controller to purchase that is compatible with the tiny hawk? Thanks 😊
Depends on how much you want to spend and if you plan to stick with Frsky or not..
www.wethehumans.cool/drones
@@FrequentFlyerRC I am willing to spend $500 for goggles. Around the $200 mark for transmitte. Also a newbie question. What is frsky?
You have several transmiter(radio)/receiver(goes on the quad) protocols like Frsky or Flysky and others. A Frsky RX will only work with a Frsky TX and a Flysky RX will only work with a Flysky TX. RX=Receiver, TX=transmiter.
@@helixinwonderland8938 ok thanks for the clarification. So I have purchased the tiny hawk and say I go with a frsky transmitter, will the transmitter come with a receiver that I need to put into the tiny hawk? I don't understand why they don't offer transmitters with the quads for people who are new to all of this.
Did anyone notice that prop on the table that started spinning when the tinyhawk got close to it?
Wind from Tinyhawk 👌🏽
Can you please put the link of the props?
Tks
Link is in description 👍🏽
100 times better than the "poke the spindle back through" method, and safer! thanks for sharing!
No problem brother and thanks for watching man 😁 👍🏽
They look like they don't fit as good as the factory ones they appear not to go up on the motor like the others?
True, original fits best but this is but an option 👌
Cool. Just ordered this quad. Looks cool . Great video cheers :)
Thanks man! Awesome! 👍🏽
Thanks Bro. Looks like a solid upgrade so far!
Well Emax has 4 bladed props now🤪👍🏽
Dude this just came out and you are already "Chop Shop'in" it...lol You're awesome, but then you know that already and you fly like a bat outta hell...not that I know what that might be like but I can imagine well enough. Happy Flying FF!
Indeed, innovation like this always gets me excited! 👍🏽
Very cool vid! Thanks man
Thanks man, I appreciate you watching bro 👍🏽
You increased the angle of what exactly? (7:57)
Oh I increased the pitch of self level mode and removed a lot of expo. It was set really low in Betaflight at like 40 and I put it to 75
thanks man,you help me a lot to remove this prop
Happy to be of help
Does it fly faster/slower, also how does it affect flight characteristics, and flight time. You had to know you were starting a whole thread of varying questions when you switched props, lol
So far, I haven't found a prop that flies it better or more efficient than the stock Avans. These props are slower, cut flight time but works with turtle mode. I was gonna try cut down Avan 2 inch quad-blades with 2 blades removed resulting in bi-blades but plugged in a 2S battery first and killed the little bird! 🤣😂🤣😆
Check out this video from my other channel "The RC ChopShop" where I add a buzzer to it and more! ruclips.net/video/jJtTPYW-X04/видео.html
@@FrequentFlyerRC that sux, but3. amp esc's would have pulled over 12 amps, I think. It six that turtle mode doesn't work with stock props, I think that hub has something to do with it, but mine isn't here, so just guessing.
how about putting your Logo sticker on Amazon....I'd like to have a couple of those !
As of now there is only shirts and goodies but I'm working on it! 👌🏽
Could you fit an xmplus to a tinyhawk?
Absolutely 👌🏽
Dope tip brother! This was today weather right?? Freaking windy as hell for sure..
Yup today!
it worked
Good to hear 👍🏽
This was so amazing, thank you
No problem and thanks for watching 👍🏽
Your video has been very helpful. It works on every prop ;-)
Awesome to be of help! 👌🏽
Considering the high wind, the little guy did well in handling that wind. Good mode compared to stock. 😎👍🏽👍🏽
It's a BEAST!
This guy has mad skills though so that is probably more the reason haha... I'd have 5 seconds of flight and a looong walk.
Wow! That was windy! I'd lose it in a heartbeat in that alley
Need a lot of pitch to manage 👌🏽
Thanks
No prob!
Awesome tip for removing old props.
Thanks man and thanks for watching 😁 👍🏽
I think your problem with turtle is that it turns all props instead of only two at once
How could that happen? (cause) Nick Burns said his doesn't flip over in turtle mode either and they came that way outta box too..
all of the motors arent suppost to spin when using turtle mode though.
@@FrequentFlyersRCChopShop i dont know i would flash the escs , when i get mine i also will reverse the proprotation
Kanaan Nichols they all spin very slowly to begin with but when you hit the stick, two motors rev up and the other two don’t
I see now, all props are moving in turtle mode
Been waiting to see your review on this.
Quick Review coming today 👌🏽
That looks so nice for someone just starting!!!!!! I just love everything about this little drone!
GREAT FLYING
👍😀👍
Thanks man! 👍🏽
Genius. Thanks so much. Couldn’t figure it out. Ha ha.
Awesome to hear it helped👍🏿
So now the props are sticking out of the bottom and hitting the floor? Turtle mode doesn't look like it is working right, it should just spin 2 motors not all four!?!?!
I didn't touch anything, that's the way it's working out of box. Also, the props don't touch the floor, there is a battery bay that lifts it up and the front and back edges would have cleared it if the battery and bay saw not there..
It's a tunable feature in betaflight and emax set it to 20% mix. Its to push/pull at the same time and it's extremely helpful for brushless whoops that just slide around when trying to flip back over.
Dang, I have some of those little orange bull nose props, but I seriously doubt I will ever be able to remove one of these tiny props from my Tinyhawk without wrecking something!
🤣😂🤣😂
Dude's a genius
LOL
Well done!
Thanks bro 👍🏽
Great info thanks
Thanks and thanks again for watching 😁 👍🏽
Just got my th yesterday. Put mockingbird on it today. But still can’t get the props off 😂 lol
How do you like mockingbird?
Frequent Flyer RC I love it. I feel I need to change up the acro rates a bit but angle is great. Haven’t messed with horizon mode much yet but overall it definitely helps wake up the tinyhawk. I only flew one pack with it all stock and immediately went to pmb. I couldn’t fly stock rates at all. Lol.
@@archer4922 where do I go to check out Mockingbird?
Frequent Flyer RC here’s the vid I used mainly bc he has a cli dump you can just copy and paste. ruclips.net/video/u5nl786dE0E/видео.html
Frequent Flyer RC here’s the vid Bardwell did ruclips.net/video/lnung_CCoa0/видео.html
Best amsr channel
Thanks man
Nice,now I want one!!
Not a, bad choice at all!
theses spokes should have been thickened up at the connections points on that frame and they are absolutely the weakest point on this quad. its a shame. hope they will sell frames for cheap. or even update it if it becomes a huge issue.
Today I found out that are tge propos that dent them
Actually it isn't. This frame is insanely durable, and don't break at all.
It's kinda funny all the other quads fly better with 4 and they was trying to sell us 3 blade saying they was best...now everyone went back to 2 or 4
It's all preferences (3 blades give more flight time than 4 in most cases) 😜
Hola
What up👍🏽
You da man...Nice turtle demo!!!
Thanks man! 👍🏽
good job..works good..
Thanks man
Cool. Good to know!
I wish there was a 3 bladed version
That wind is really strong. And the tinyhawk just flew trough it.
Indeed! Good flyer
I was suprised how well it did in that wind as well. What were you recording audio with? I could barely hear that wind.
what about tinyhawk II? this one is impossible
😂🤣😂🤣
@@FrequentFlyerRC naaah that shit was so stuck i was like wtf
Very good video!! G9d bless
Thanks man!
Brilliant
Thanks man
Chop shop edition...nice:)
Thanks lol
So frustrating every video I look up on prop removal only shows these baby drones that you pop the props off of. Nothing shows videos on how to remove props from a drone that requires a tool just got my drone 2.5 inch tinyhawk 2 freestyle and I have no idea what tool you use to remove them and nothing online or RUclips says how. It's like it's a secret 😂
I guess I can try to squeeze in a video on how to remove props for brushless drones but I feel like I have already done a video on it or at least reviewed tools that are made to remove the props. I think I have 3 different tools made for that. 👌🏿
@@FrequentFlyerRC that would be nice if you made a video on it or kinj me to one if u made
Nice. 👍👍👍👍👍
Thanks man! 👍🏽
I had to remove the motors and literally cut them off. Even after cut, they still weren't coming out... literally glued to the motor. I had to use 2 pliers and grab 2 of the wings after I cut them all the way thru and pull them til the plastic broke to get them off. What the actual fuck...
Wow
Only two motors on the left or right should be sprinning up to flip that huge things, :) might be an issue that will be fixed in BeF update
Not true, this was added to help when brushless whoops came out. You can adjust the percentage in betaflight (emax set it to 20%), but what it does is push/pull at the same time to try and help plant the one side while it attempts to lift the other. It works well on a lot of whoops that wouldn't normally be able to flip with the standard setting.
aaand they are already sold out. Getting props for this thing is hard as hell.
I agree! They really need to make adequate numbers of spare parts available at launch!
@@FrequentFlyerRC ..and as spares in tge box!...
be nice if this thing was made for 2S, wonder if it will run 2S
If you want it to burn up immediately, sure.
That’s genius
Thanks man! I appreciate you watching
I found this after hacking off a prop I put on the wrong side!!! 😂
Wow lol
That is not how you do it, lol.
Just as written in the instructions of the product you use the supplied screwdriver to press against the metal plate that holds the motor, that makes removing props very easy without risk of damageing the frame
Have you had the pleasure of trying that?? Then maybe you would understand why so many people embrace doing it the way I dhow in the video! 🤣😂🤣
Frequent Flyer RC I’ve changed them countless times.
If you do it the way they describe it the props just come off quickly.
I think you still risk breaking it that way.
By the way there are turtle mode props that properly fit on the emax motor, I got mine from amazon.
STOP FLICKING THE TX STICK! IT WILL RUIN YOUR STICKS QUALITY...
That was a whole year ago and my sticks are still good! Did that happen to you?
@@FrequentFlyerRC if you do it a lot it will ruin your sticks spring elasticity... I'm usually on a low budget so I prefer to keep the quality of my stuff the best I can... I think it happened to my dad cause he told me about it...
Well in Devo transmitters you can literally adjust the spring elasticity! Not 100 percent but I think you can do that in a Taranis as well..
S
?
Taking me a hour on each one can’t figure it out
Which TinyHawk? It's harder to do on the second TinyHawk 🤷♂️
Frequent Flyer RC the first one I got it after but man they were tough