TinyHawk 3 HDZero Build | The Whoop You Never Knew You Wanted
HTML-код
- Опубликовано: 10 ноя 2022
- The Tinyhawk 3 is an amazing drone, which can be purchased by itself or bundled as an RTF kit(full review linked below). But what if you wanted to fly this drone in the digital form, and enjoy HD flying with low latency? Needless to say, EMAX currently does not offer that option. All hope is not lost, because you can make that version of the Tinyhawk 3 in little time, and for not a lot of money. Today we'll be taking you along the entire process including parts list, assembly, and even configuration.
If you got help, information, or entertainment from this video, please consider sending us a Super Thanks or just hit the "LIKE" button. This directly supports the channel, and allows us to create even more amazing content. Thank You!
Buy the TinyHawk3 ANALOG Here (EMAX): bit.ly/3NX2gFG
Buy the TinyHawk3 ANALOG Here (USA): bit.ly/3A3Aylg
Buy the TinyHaw 3 RTF Kit Here: bit.ly/3G2AEgH
Buy the TH3 Frame Here (USA): bit.ly/3Uqo2Ex
Buy the Tinyhawk 3 Hardware kit: bit.ly/3hyw8fL
Buy The HDZ VTX & Cam Here: bit.ly/3A3pVyC
Buy the BetaFPV FC Here : bit.ly/3ArKQvJ
Buy the Happymodel Motors Here: bit.ly/3ToR9GY
Buy Gemfan Props Here: bit.ly/3UmXjZk
Buy HDZ VRX Here: bit.ly/3hqq7l3
Recommended 1S Battery: bit.ly/3tkY9d8
* All links are affiliated unless otherwise stated, and helps support the channel at no cost to you. Thanks
Join me on Instagram: / onemanunmanned
RELATED VIDEOS:
Comparing EVERY HDZero Goggle: • HDZero Goggles Challen...
Transporter 2 HD: • EMAX Transporter 2 HD ...
TinyHawk III RTF Impressions: • EMAX TinyHawk III RTF ...
TinyHawk III RTF Full Specs: • EMAX TinyHawk III RTF ...
TinyHawk III First Flight: • EMAX TinyHawk III RTF ...
TinyHawk III 5 Things I Like and Dislike: • EMAX TinyHawk III RTF ...
Mobula7 HDZ 1st Flight: • Mobula7 HDZERO 1st Fli...
What is HDZERO?: • What Exactly is HDZERO...
FatShark Scout HD: • FatShark Scout HD | Th...
DJI Goggles V2 1st Impressions: • Everything you NEED to...
DJI Goggles V2 Setup & Flight: • DJI Goggles V2 Setup &...
BDI Adapter: • BDI Digidapter V2 | Fl...
What is ExpressLRS: • What Exactly Is ELRS -...
ELRS FULL Setup Pt1: • ELRS FULL Setup and Co...
ELRS TX Nano Module: • BETAFPV ELRS Nano Modu...
GEPRC SMART16 1st Flight: • GEPRC Smart16 1st Flig...
GEPRC SMART16 Unbox: • GEPRC Smart16 | The St...
GEPRC TinyGo Unboxing: • GEPRC Tiny GO 4K Unbox...
GEPRC TinyGO Full Specs: • GEPRC TinyGO FULL Spec...
GEPRC TinyGO Setup & 1st Flight Pt.1: • GEPRC TinyGO Setup & 1...
GEPRC TinyGo 1st Flight Pt2: • GEPRC TinyGO Setup & 1...
GEPRC TinyGO 5 Things to Like & Dislike: • GEPRC TinyGO | 5 Thing...
Radio Lite 2 SE w/ELRS Pt2: • BETAFPV Lite Radio2 SE...
Radio Lite2 SE w/ELRS Pt1: • BETAFPV Lite Radio 2 S...
BabyHawk II 1st Flight: • EMAX BabyHawk II Analo...
BabyHawk II Unbox/1st Impression: • EMAX BabyHawk II ANALO...
BabyHawk II Setup: • EMAX BabyHawk II Analo...
X-Knight35 Unbox: • BETAFPV X-Knight35 | S...
X-Knight35 Setup: • BETAFPV X-Knight35 | S...
X-Knight35 1st Flight: • X-Knight35 1st Flight ...
Beta FPV Pavo30 Unboxing: • BETAFPV Pavo30 | All t...
Beta FPV Pavo30 Full Specs: • BETAFPV Pavo30 Full Sp...
Beta FPV Pavo30 1st Flight: • BETAFPV Pavo30 | Setup...
GEPRC Smart 35 Unbox & Impressions: • GEPRC Smart35 | A 3.5”...
GEPRC Samrt35 1st Flight Pt. 2: • GEPRC Smart35 1st Flig...
GEPRC Smart35 1st Flight Pt.1: • GEPRC Smart35 | FULL S...
Baby Nazgul Unbox & 1st Impression: • iFlight Baby Nazgul | ...
Baby Nazgul Setup & 1st Flight Pt1: • iFlight Baby Nazgul | ...
DJI Spark: • DJI Spark Review - All...
DJI Spark Accessories: • Must Have DJI Spark Ac...
Insta 360 OneX: • Testing the Insta360 O...
Yodobashi Japan Store Pt1: • Inside Yodobashi Camer...
Yodobashi Japan Store Pt2: • Inside Yodobashi Camer...
Yodobashi Japan Store Pt3: • Inside Yodobashi Camer...
#Tinyhawk3 #emax #whoopseason 
Наука
I never knew it could be that easy. thanks brother for this one
Thanks, I appreciate that. It's not bad at all, it's just those darn small screws.. 😆
@@OneManUnmanned i just got nervous at that wire you had to cut hahaha
Man i can't wait to watch this hahaha
Me being an audio guy as soon as you said you’re going to use yellow for your audio. I was thinking. Yes!!!
fantastic, thanks!
Thanks Nathan!
Nice clean build! I wouldn't have tried that frame, but you were up to the challenge!
Haha.. thanks.
You made it look easy. Great video 👍👌
Haha, Thanks.. It was anything but easy especially when filming a well. The tiny screws are extremely difficult to work with. Thanks again! 😊
Great build thanks for sharing 👍
Thanks, I appreciate that, Bryan.
super cool.
Thanks!
great video, thanks! I can't crush flip (turtle mode) with my Tinyhawk 3, it just brake dances all around on it's back. Does it work for you? Are the motors too weak for that?
you did ttop footage~One-:))
Thanks!
How easy would it be to install the HDZero camera on an already built Tinyhawk 3? Does it help a lot with the annoying static picture you get when flying with the original camera and setup the TH3 comes with?
You can’t just add an HDZero camera to the existing analog setup. You’ll have to add a new HDZero VTX as well as the camera.
elrs?
Yes, ELRS
THis will be good to try as my flight controller died. i just check on the part list and no stock. thanks i will try this when i can find a controller.
No prob.. Parts are hard to find these days. Get them while you can.
@@OneManUnmanned i got the parts. what file did you load on the controller?
I used the Metor75 CLI since that’s where the FC came from, and that drone is similarly sized to the TinyHawk 3. I later changed the tune, using the Presets tab in BetaFlight to “UAV Tech - Whoop(1S & 2S)”.
I also used the HDZero VTXs Presets in the “Presets tab of BetaFlight to configure my VTX.
I’ll link the Metor 75 CLI below if you want to use it for basic configuration, but I’m now on the UAV Tech Whoop Preset.
support.betafpv.com/hc/en-us/articles/4408029285017-CLI-for-F4-1S-AIO-5A-FC-ELRS-2-4G-2021-
@@OneManUnmanned what did you pick for the PWM?
i got it working but the props are hitting the battery. did you have a clearance problem?
I noticed the extra space under the battery. Very nice. Did not know about the Gyro issue. Will the firmware update fix it or once it’s done it’s done.
The firmware does not fix it, just prevents it from happening. If you've already powered it up and notice no issues, then you should be fine.
Have you ran across any good pertunes for the th3.
I’m using the “UAV Tech - Whoop (1S - 2S)” Preset and its working OK so far.
Very nice. Got mine last year was not much for mods then. Time to look in to it.
Really cool but I have a question, (totally unrelated) I really want to get into FPV so I want to get the TH3 but I feel like they might make a new model soon so should I buy or wait?
I do not know if there is a new model coming. Companies like to change/updated their products often to integrate new technologies. The TinyhawkIII 3 has been out for almost a year now, but I don't know EMAX's roadmap. My advice would be to choose a drone that you're comfortable with and like, then buy it assuming there will be no updates.
@@OneManUnmanned ok thanks
Is there any way to just change the camera system to HDzero if you already have the Tinyhawk, without changing everything else, could you do a video of the simplest way to upgrade just the camera system?
I personally have 5 analog Tinyhawks.
No, you can’t just change the camera. Your factory camera is analog while the HDZero is digital. You’ll have to change the camera and VTX at the minimum to make this system work.
@@OneManUnmanned • Awesome.
How do you change the motor?
What do you mean? It's the reverse as installation. Just unplug it from the Flight controller and unscrew the 3 mounting bolts.
@@OneManUnmanned ty bro
What equipment du you use?
What do you mean? To film, to solder? All the parts for the drone are listed in the description.
@@OneManUnmanned For soldering and flying
sEcOnD
I'm fourth, surprisingly
I love tinkering... Do u have a Facebook?
It's in the about section of my Channel.