Here is your chance to WIN Ninebot max front fork suspension. Check out this video on how to enter. ruclips.net/video/uVxDjK--6sw/видео.html And good luck. :)
You're awesome. Mine was slightly different but net net, same thing and couldn't have done it without you. The how to video by the mfg on amazon was 90 seconds and started with the wheel already off.
Great videos!! I didn't unplug anything except the battery plug. I just let my rear tire hang while I installed the shock. Then I pulled the motor to wheel wire out to fit the new distance. I did end up splicing my brake light wires back together. I just illuminated the brake light wire plug. I am also going to replace the spring shock with an air shock. Not that I really need to but I did that to my front shock and really like it. Again thanks for the video!
You should definitely do a video on upgrading to air shock. :). I was considering adding mine without taking off the motor. But I didn’t hang to have to worry about the wires getting cut up and the motor being in my way. Also gave me another video on how to remove the motor :).
Thank you so much for wanting to support my channel. I didn't think this sort of thing warranted a Patreon channel as of yet, however, I made one a while ago for when people want to. Although not expected, you are more than welcome to do so here. :) www.patreon.com/Scootletsgo1
hey dude. absolutely love these videos. don't know how I missed them before researching how to dos. top quality insight i have to say and love the level of detail and honesty. looking forward to the next parts- obviously you would recommend the time and effort it takes to put the suspension on? I have this inner kid feeling of the original gran tourismo and leveling up my subaru impreza
Thank you for your kind words :). I would definitely recommend the front suspension I have. I will do a follow up of the rear. What are we if we don’t modify and improve haha
Here is your chance to WIN Ninebot max front fork suspension. Check out this video on how to enter. ruclips.net/video/uVxDjK--6sw/видео.html
And good luck. :)
You're awesome. Mine was slightly different but net net, same thing and couldn't have done it without you. The how to video by the mfg on amazon was 90 seconds and started with the wheel already off.
Thnx lots i had a different tail light but it workt out :) took out the original light and put it there. You deserve more views and likes
Great videos!! I didn't unplug anything except the battery plug. I just let my rear tire hang while I installed the shock. Then I pulled the motor to wheel wire out to fit the new distance. I did end up splicing my brake light wires back together. I just illuminated the brake light wire plug. I am also going to replace the spring shock with an air shock. Not that I really need to but I did that to my front shock and really like it. Again thanks for the video!
You should definitely do a video on upgrading to air shock. :).
I was considering adding mine without taking off the motor. But I didn’t hang to have to worry about the wires getting cut up and the motor being in my way.
Also gave me another video on how to remove the motor :).
Do you have Patreon etc? Your honesty and integrity plus all the advice and reviews leaves me with a desire to give something back.
Thank you so much for wanting to support my channel.
I didn't think this sort of thing warranted a Patreon channel as of yet, however, I made one a while ago for when people want to.
Although not expected, you are more than welcome to do so here. :)
www.patreon.com/Scootletsgo1
Thank you~~ It helped me a lot.
I'm glad!
Go go go...Nice one !
Thank you.
Interesting modification your doing. Hmmm can’t say I’m looking forward to doing a rear tire change by the looks of things.
Thanks.
The rear tire change should be just like the front. Just with a bit more weight and being careful not to bash the motor :)
You always impress me, so happy to subscribe to your channel, you make the scooter more valuable with these type info, happy Christmas!🧡🧡🧡
Thank you.
I hope you have a lovely Xmas too. Part 2 out this week to give you a bonus :)
hey dude. absolutely love these videos. don't know how I missed them before researching how to dos. top quality insight i have to say and love the level of detail and honesty. looking forward to the next parts- obviously you would recommend the time and effort it takes to put the suspension on? I have this inner kid feeling of the original gran tourismo and leveling up my subaru impreza
Thank you for your kind words :). I would definitely recommend the front suspension I have.
I will do a follow up of the rear.
What are we if we don’t modify and improve haha
Yes
is it posible to install that suspension without disconnecting any wires ? i get that suspension tomorrow and ill be installing it tomorrow .
You will need to disconnect the wire to avoid damaging it
so Good~~~
Thanks, my dude
What did you use to get the foot rubber stand glued back on 🤷🏼♂️
I actually didnt glue mine back down. However, you can used double sided tape, or you may even use PVA glue. You don't need anything strong.
How about the water resistent?
it still anti water?? Splash or rain?
Depending on how you install this you may lose your IP rating. But I’ve not had any issues. :)
That such a friend I have a question.. How's the product, it's worth making the purchase and making that modification
Hey. Yes I find for the price this is a good modification. You just have to make sure to keep an eye on it and tighten the bolts down occasionally.
what size are the security torx screws for the battery cover?
I believe they fit a T3 Torx. But you can buy a pretty cheap set of torx heads to use here.
Mine cost me less that $10
Would be nice to see baseplate cover in aluminum
Maybe Santa will get me it for Xmas ;)
Where can I purchase a new ninebot max30 motor?
It’s jamming or “giving out” making a huge and loud vibration and slowed acceleration and sketchy breaking
My front fork finally arrives tomorrow(Christmas Eve)😁
That’s awesome. Looking forward to hearing your thoughts
Väga tore
Be sure to look out for part 2. :)
I having a hart time with those screws what’s the size ? Or what’s the tool screws drive are you using to take that base plate out ?