Hey TJ! It was awesome getting to meet you & film with you, glad you enjoyed the car. If anyone has more questions about the build feel free to reply to this comment, I’ll do my best to answer any unanswered questions!
No questions from me, just thank you for building this absolute work of art and showing the internet. I hope you enjoy every minute you get to spend driving your dream
@@ricepony33 That may be so, but you have to appreciate this guy's dedication to the system. CANbus can be a pain to work with if the loads and connections are not exactly the way the OEM harness is. Even wire impedance can be a factor. If he's not throwing any codes, I'd say this is a big W for him.
Because displacement doesn't really tell you how physically big an engine is. Yes it is of course a factor, but they are other factors too like engine design. Viper engine is a pushrod engine so its no where near as wide as it would be if it was DOHC. There are 7 liter Chevrolet pushrod V8s out there that are the same weight and same physical size an a 4 liter DOHC BMW S65 V8. Thats how much difference engine design makes to size.
16:50 this build has to be shown everywhere its incredible that such a young men created this by himself the build is so nice, it naturally attracted the haters in the comments. Its so clean that some people cant take it haha.
A little unknown fact while we're talking about Viper V10 powered FD's. A Japanese company named "Top Fuel" made some Dodge Viper conversion bodykits for the FD3S RX7 in the 90's. Pictures and videos are hard to find, but it's real.
Just wow, i remember when he started building this. And i like the finished product. I also own a FD RX7, but I went the 20b route. I've had it since 2006 and went 3 rotor in 2008. The hood on this car takes some getting use to but growing on me. I'm a fan, great job and I appreciate all the work he put in. Nice work, really cool.
All the purest complaining seem to be forgetting it's not their car, and this was his vision. I absolutely love it, people ragging itc couldn't build a popsicle stick doghouse 😂
Its all the little bits, having to redo all the heater ducts, and plumb in the servos etc, you dont normally hear about 👌 Clever guy, who can drive too! Nice build, hat goes off to you pal 🫡
As if a Viper wasn't bonkers enough... This needs to be on Autotopia LA. I am a controls engineer with 25 years in, and I have to comment how tidy the wiring is. Very good attention to detail and the wire gromming was excellent. You could pick a single wire and follow it all the way to every termination, almost without busting the loom. Well done sir.
I like this build i do like all rotory motors but when you snap a FD, V8+ swaps are a must! reliable and fast. AWD option is also usually pair with these upgrade.
wow. I love these custom builds. I wish I had the time/money at different points in my life to do this..now i make good money but have a mortgage, kids, responsibilities, etc... and it would take a lot of saving/big loans to put that much cash into a build like that, when family comes first..not likely to happen. Awesome build, thanks for sharing!
Love the whole story behind the build. You talking about how you actually Build it up for 5 years from a shell 🐚 only.... You're a real motivation for me, to do the same, but imma try do my own build-up in 3 year now...... thank you for the motivation bro. 🙏🙏🙏🙏🙏❤️❤️❤️❤️❤️🔥🔥🔥🔥🔥🙌🙌🙌🙌🙌🫶🫶🫶🫶🫶👍👍👍👍👍💯💯💯💯💯😇😇😇😇😇
Ok I have seen a lot of cool builds on the internet just like the rest of you. But WOW! That is amazing I bet that thing is a handful to drive. Amazing build Clayton and the look of it is amazing. You should take that to SEMA. People need to see that car! I am a 80's kid the RX-7 was such a cool car. The look of it is PERFECT!
There's 400lbs difference just in the engines, plus another 100lbs in the transmission. There must be a lot of bracing in the back to make 1-3% weight shift
Clayton I was watching your RUclips channel back in the day. I always wondered what happened to this build. Glad to see it on the road! Looks awesome! Did you continue with the RUclips channel? I looked back a few times and commented asking if it was continuing. I can’t remember the name of your channel now.
Hey Adrian! We mostly stopped making videos, just a big change in life direction. We have another video going up on the channel soon (@slighlymad) but we won’t be doing that much more going forward. Glad this came up in your feed for you to see it all finished!
@@slightlyMADcustoms yeah me too! It has crossed my mind quite a few times so was happy to exit pop up. Was just an algorithm thing. Hadn’t seen this channel before. I’ll look out for your vid
Wow. My favorite American car and favorite jdm in the most perfect beautifully built combo. I'd rather have this over a Lambo or Ferrari. Amazing work young man! 🏁😎👍
One of the most overlooked things about all generations of rx7 from the first to the third is the engine compartment, for being one of the smallest displacement engines they have massive engine bays that can fit some of the largest motors pretty easily.
I love the car. I love the time and effort he has put into it. I don't love that a company charged him $5k for pieces of fiberglass that just screw to the side of the car with exposed screwheads. that company should be ashamed.
Gen 1 viper ran 12.6 @113mph... Wild to think i built an 03 c class thats faster for only 10-11.5k including 4.5k car cost but I'd still choose yours 🤤
oh fck i never expect that VIPER engine would fit on FD engine bay like that, i mean it still have a room for another thing after you slam that V10 on it.. and yeah gonna love that V10 scream
🎉😂 one of my friends here in texas has vipers,and also 6 ALT chassis v10 swapped cars,as well. And he had a v10 swapped fd. One that he did years ago.👍🏼👍🏼🤘🏼
Hey TJ! It was awesome getting to meet you & film with you, glad you enjoyed the car. If anyone has more questions about the build feel free to reply to this comment, I’ll do my best to answer any unanswered questions!
No questions from me, just thank you for building this absolute work of art and showing the internet. I hope you enjoy every minute you get to spend driving your dream
Thank you for taking the time to film with me.
@@Ebb1337 thank you for watching this interview
No questions, just wanted to say this is an impressive build!
Ty for sharing this wonderful machine with us. Very impressed bro.
Very humble guy. He acts like this is so easy. 99% of us couldn’t replicate what he has done here. He’s very smart you can tell. Polite too.
I can’t imagine creating that electric system. It is a nightmare. But the car is pure perfection. Congrats.
It would have been easier to go motec or haltec.
Thank you for taking the time out of your day to watch my interview. I really appreciate you.
@@ricepony33 That may be so, but you have to appreciate this guy's dedication to the system. CANbus can be a pain to work with if the loads and connections are not exactly the way the OEM harness is. Even wire impedance can be a factor. If he's not throwing any codes, I'd say this is a big W for him.
@@superezbz definitely, just surprised he didn’t go with a full wired kit.
Rx-7 with Viper motor interesting!👌
It’s the craziest build I’ve ever filmed in Canada
@@magnacars Just when I thought the Honda Civic with Corvette motor was insane.
The viper is light already it just with small diet lol I swear
What about the Honda accord with the hell cat motor in it? Crazy crazy builds out here man. Love it!!
The fact that it fits in there though 😮😮😮
Yeah 😮 big engine
I am using a Mercedes M120 V12 for my project 😎
Right, the engine bay doesnt look stressed for space.
Only because no one else is gonna do it......That's what she said.
Because displacement doesn't really tell you how physically big an engine is. Yes it is of course a factor, but they are other factors too like engine design. Viper engine is a pushrod engine so its no where near as wide as it would be if it was DOHC.
There are 7 liter Chevrolet pushrod V8s out there that are the same weight and same physical size an a 4 liter DOHC BMW S65 V8. Thats how much difference engine design makes to size.
Thank you for taking the time out of your day to watch my interview. I really appreciate you.
You get all my thumps and toes up.. I’ve seen a 20b turbo,a 4 rotor and LS swap rx7 but a viper motor swap is the shit. You have my full props bro.
I think that Jay Leno would be interested in this!
I think so too! Thank you for taking the time out of your day to watch my interview. I really appreciate you.
Crazy at a young age he had this much dedication to build that car and went for it take notes young ones this guy will be successful.
You gota be slightly mad to come up with this insanity, happy to see it finished.
That's what I told him haha, thanks for watching mate
16:50 this build has to be shown everywhere
its incredible that such a young men created this by himself
the build is so nice, it naturally attracted the haters in the comments.
Its so clean that some people cant take it haha.
That things sic for being built by such a young man, I'm hella impressed the amount of detail. And the fact it even runs and runs good.. hell ya bro
Beautiful machine and worth every penny spent. Enjoy that thing and drive it as much as you can.
Thanks for showing this, clean & insane! Really unique build!
Glad you like it!
A little unknown fact while we're talking about Viper V10 powered FD's. A Japanese company named "Top Fuel" made some Dodge Viper conversion bodykits for the FD3S RX7 in the 90's. Pictures and videos are hard to find, but it's real.
Just wow, i remember when he started building this. And i like the finished product. I also own a FD RX7, but I went the 20b route. I've had it since 2006 and went 3 rotor in 2008. The hood on this car takes some getting use to but growing on me. I'm a fan, great job and I appreciate all the work he put in. Nice work, really cool.
All the purest complaining seem to be forgetting it's not their car, and this was his vision. I absolutely love it, people ragging itc couldn't build a popsicle stick doghouse 😂
Putting a v8 in fd is a slap in the face, but putting a v10 in one is impressive
Its all the little bits, having to redo all the heater ducts, and plumb in the servos etc, you dont normally hear about 👌
Clever guy, who can drive too!
Nice build, hat goes off to you pal 🫡
Favourite car in Calgary!
Stoked you did a video about it. Been thinking about this best since driven show.
The fact he built everything says alot . This guy will go far in life . Most youg people would pay someone to do this . Thats amazing you did this
I would think RAM air might look better.
As if a Viper wasn't bonkers enough... This needs to be on Autotopia LA. I am a controls engineer with 25 years in, and I have to comment how tidy the wiring is. Very good attention to detail and the wire gromming was excellent. You could pick a single wire and follow it all the way to every termination, almost without busting the loom. Well done sir.
Dude, why do I feel like this should’ve been done a long time ago this is a really good swap idea.
True Technician honor, salute to you brother because you put in work, true passion, mind blown.
Great job TJ. The dedication is worth the appreciation. ❤
Amazing build. Great video Magnacars!
Thank you for taking the time out of your day to watch my interview. I really appreciate you.
Great Build is an UNDERSTATMENT !
Thank you for taking the time out of your day to watch my interview. I really appreciate you.
I like this build i do like all rotory motors but when you snap a FD, V8+ swaps are a must! reliable and fast. AWD option is also usually pair with these upgrade.
i dont know how to feel. i started doing what he is but....... hes 10 years younger, and he already did it. .. wow props
This is the best solo build I've ever seen. So dope.
wow. I love these custom builds. I wish I had the time/money at different points in my life to do this..now i make good money but have a mortgage, kids, responsibilities, etc... and it would take a lot of saving/big loans to put that much cash into a build like that, when family comes first..not likely to happen. Awesome build, thanks for sharing!
Awesome video Clayton is fucking bad ass, and so are you for finding him and giving him recognition.
Love the whole story behind the build. You talking about how you actually Build it up for 5 years from a shell 🐚 only....
You're a real motivation for me, to do the same, but imma try do my own build-up in 3 year now...... thank you for the motivation bro.
🙏🙏🙏🙏🙏❤️❤️❤️❤️❤️🔥🔥🔥🔥🔥🙌🙌🙌🙌🙌🫶🫶🫶🫶🫶👍👍👍👍👍💯💯💯💯💯😇😇😇😇😇
Absolutely SICK! I’ve never loved a build as much as I love this! Even the sound seems to fit the car so well. Well done, sir.
Glad you like it!
Ok I have seen a lot of cool builds on the internet just like the rest of you. But WOW! That is amazing I bet that thing is a handful to drive. Amazing build Clayton and the look of it is amazing. You should take that to SEMA. People need to see that car! I am a 80's kid the RX-7 was such a cool car. The look of it is PERFECT!
I love this vid man ❤️ great guy and great interview man!!
We need more Viper swaps. Viper Swapped S14 and now Viper Swapped RX7 and Viper Swapped XJR
Thank you for taking the time out of your day to watch my interview. I really appreciate you.
I wonder if it can fit in a miata?
There's 400lbs difference just in the engines, plus another 100lbs in the transmission. There must be a lot of bracing in the back to make 1-3% weight shift
Clayton I was watching your RUclips channel back in the day. I always wondered what happened to this build. Glad to see it on the road! Looks awesome! Did you continue with the RUclips channel? I looked back a few times and commented asking if it was continuing. I can’t remember the name of your channel now.
Hey Adrian! We mostly stopped making videos, just a big change in life direction. We have another video going up on the channel soon (@slighlymad) but we won’t be doing that much more going forward. Glad this came up in your feed for you to see it all finished!
@@slightlyMADcustoms yeah me too! It has crossed my mind quite a few times so was happy to exit pop up. Was just an algorithm thing. Hadn’t seen this channel before. I’ll look out for your vid
@@adriangale Thank you for taking the time out of your day to watch my interview. I really appreciate you.
Wow. My favorite American car and favorite jdm in the most perfect beautifully built combo. I'd rather have this over a Lambo or Ferrari. Amazing work young man! 🏁😎👍
Sweet ride, but weird how the V10 doesn’t sound nearly as good as say an LS swap
One of the most overlooked things about all generations of rx7 from the first to the third is the engine compartment, for being one of the smallest displacement engines they have massive engine bays that can fit some of the largest motors pretty easily.
I'm glad this vid came up in my feed. Great interview, awesome car!
Glad you enjoyed it! Many more interviews coming
This is SO COOOL, never seen such swap like that,simply put EPIC!
Thank you for taking the time out of your day to watch my interview. I really appreciate you.
MVP🪽.
Such a huge toy. Welldone to a wellplayed.
thanks for watching the interview
So damn sick man, great work ! So happy you got your dream car
Seen this viper on a short has to find it to hear it turn on thanks for the video
Well done! And the way you got it achive is the most honorable ❤ well done, homi well done!!
Ps: the interviewer can't stop giggling 😂 and me too
I love the car. I love the time and effort he has put into it. I don't love that a company charged him $5k for pieces of fiberglass that just screw to the side of the car with exposed screwheads. that company should be ashamed.
Awesome, totally awesome. Totally respect that 'some team could build it faster but I made this by myself' attitude. Swimming in that same swamp 😁
Gen 1 viper ran 12.6 @113mph... Wild to think i built an 03 c class thats faster for only 10-11.5k including 4.5k car cost but I'd still choose yours 🤤
Sick build! This is a gen 3 though, closer to high 10’s low 11’s in this configuration
What a car! Love the sound. The meticulous nature of this lad is admirable. Girlfriend must be a saint.
This is the coolest build I’ve ever seen 💯
I’m glad you like it
How Come This Doesnt Have More Views This is Awesome
I had to Fast Forward to a shot under the hood, before I started watching… just to see if they were serious. Beautiful Job
Better than the car is the man behind it.. Loveable person great character, really respect 🥋
This blew my mind, I don't always like weird swaps but this combination is actually very nice!
Thank you for taking the time out of your day to watch my interview. I really appreciate you.
I got to see this car in person at a car show! It’s absolutely stunning car 🔥
I'm in awe... this work of art is ABSOLUTELY AMAZIN' LOOKING.
Now SWAPS are getting CRAZY 💀 beautiful ❤
This and the Rotary Ferrari I interviewed a few months back are my favourites
Nothing tells us: “Because I can” better than this video 😮
That's a smashing build for $100k.
Take that rx7 to Calvo Motorsports. Puts some twins on it and make crazy power 👌🔥
Power doesn't mean everything bruh
calvo kits are like 100k bro, log off youtube once in a while
Turbo power would make this car suck as a road car. It would be better off with an N/A modded setup and a sequential.
Wow amazing craftmanship! Well done. Amazing car.
I thought this video was fake that's freaking un real and I'm proud of that build that's what's u call insane
just watched scraplifes videos on their viper swapped 240sx its amazing what that engine can fit in
Thank you for taking the time out of your day to watch my interview. I really appreciate you.
Scraplife got some sweet builds. The hellcat swapped Z is gnarly too
An RX7 with a Viper V10? That’s a potent mix…gives me the heabie jeebies.
Thank you for taking the time out of your day to watch my interview. I really appreciate you.
Naw it's not in a viper probably way safer
Great video !
Thank you I’m glad you enjoyed it
Good job. I have no love for or attachment to rotaries, so this is an upgrade in every way.
Beautiful car and very sweet! Great job
Normally I hate when people take the rotors out but this is sick
What a genuine cool guy
Wow. Beyond impressive!!!!
Beautiful build
It really is!
Respect for that build
Thank you for taking the time out of your day to watch my interview. I really appreciate you.
Hell yeah man, super cool!!! 🤩👍🤘🔥
The hood looks like Joanna Jedrzejczyk. If you know you know 😂
Brooooo
oh fck i never expect that VIPER engine would fit on FD engine bay like that, i mean it still have a room for another thing after you slam that V10 on it.. and yeah gonna love that V10 scream
Thank you for taking the time out of your day to watch my interview. I really appreciate you.
Super smart dude and beautiful build. Well done
Glad you like it
What a beautiful build
Sick build and very inspiring and motivational.💯🔥🔥🔥
Glad you liked it!!
i guess it is reliable now 😅
haha thank you for watching Christopher
🎉😂 one of my friends here in texas has vipers,and also 6 ALT chassis v10 swapped cars,as well. And he had a v10 swapped fd. One that he did years ago.👍🏼👍🏼🤘🏼
just from the title this is gonna be awesome
Rotary engines are really cool, in term of power and sound but bro.... V10 is King 👑 handsdown for the owner 🤝
What a glorious merging of machines! All hail the Omnissiah!
sick video, warp stabilizer isnt always needed :)
Thanks for the tip!
I must say 2 cars on top of my favorite list i have an old rx7 live vipers but the 2 combined unique wicked different 😊😊😊
That's a nice build 😍
I'm building my dream V12 supercar with the OG zonda engine 😎
Put a Bugatti Tourbillon V16 in your project car and I'll subscribe to you.
@@lorddoobsworth144 😂 I like the zonda sound so that's why I am using a V12 for this one 👍
That made me chuckle 🤣 thanks😎
Sounds sick man, good luck
@@Itsjamilagain Thank you 🙂👍
Episode 2 of my build is being uploaded tomorrow 😎 it's taken hours to edit. I'm new to youtube
What car???
Who's here because the Instagram story blue balls you with no engine sounds.
Me.
Beautiful! Amazing! Congrats! 👏🏽
Thank you!! 😊
I'm impressed he's work, but I'm a pure JDM guy i love the Rotary Engine still. BTW Good work👍👍👍
Funny thing is that I've always believed the new RX7 looked like a mini Viper.
Still it’s cool the kid built the ride….👍🏾
Dude his wire work very 👍 nice
Calgary has a decent car scene, you just gotta look. From legit builds from Clayton to Oilfield money Mclaren sennas.
Wild build!
Amazing work!
🇦🇺🤜🏼🤛🏼😎☮️🍀
Thank you for taking the time out of your day to watch my interview. I really appreciate you.
So innovative, this is amazing
Such a great story! Thanks for sharing.
Thank you for taking the time out of your day to watch my interview. I really appreciate you.
Geez that sounds so amazing
The cameraman and the Rx7 have the same noses 😂😂😂
Cool video though 👍🏼...