Turbo Lexus IS300 - Battery and ABS Module Relocation - Comprehensive Step by Step Walk Through
HTML-код
- Опубликовано: 19 окт 2024
- In this video I show you what parts list I use to relocate the battery to my trunk and the ABS module to the stock battery location. I also relocated my catch can to where the stock battery goes. I go through the wiring and try to walk you through the steps I took do the relocation. This is a custom installation and there is many ways to do this. I 3D printed a mount for the ABS module to attach it to my battery tray.
Here's my parts list:
Wire - amzn.to/397qfMR
Distribution block - amzn.to/2GRkk2z
Cable clamps - amzn.to/3bePiPV
Breaker - amzn.to/2SiAK9h
Wire connectors - amzn.to/380HKOX
90 degree wire connectors - amzn.to/2tvCFPF
4 gauge couplers to extend the stock power wire - amzn.to/2ubxJzQ
Wire looming - amzn.to/2tzPgkU
Heat shrink - amzn.to/392fGL0
Heat protecting wire loom - amzn.to/3996eFE
StopTech Brake Lines - amzn.to/2v3lCVp
I just got my IS300, and found your channel, I love the depth you go into explaining how everything is done.
Bravo!
dude. thank you you saved me a lot of time I couldn't find a diagram for an 01 anywhere
I've been wanting to do this for over a year to prep for a turbo, thanks for putting something together to follow along. Was gonna get the kit from FL too!
I put this off for so long too. lol Its nice to get it out of the way!
Finally a video that covers this in depth. I’ve been meaning to do this forever. Great video brother
Thank you!!
RacecarAndChill what did you do with your stock ground cable though? I seen you wanted to connect it to the chassis for a better ground, but where did you put the terminal?
@@trenordo2487 go to the 39:20 mark and I show you.
RacecarAndChill wow, must’ve missed that. Thanks for the replies and nice build. Subbed.
@@trenordo2487 thank you sir! Plenty more on the way!
Bro this was exactly what I needed thank you
Clean relocation bro looks good,would love a follow up in the future to see how it holds.
Make sure you're subscribed then! I'll be making videos with this car for a while!
Nice video it turned out clean. Also you should try out a chest mount when driving, and working on the car. Just a suggestion.
That thing sounds so good 🔥
This is the key to a manual jzs161
Sounds amazing! Good video
Thank you!
Awesome been wanting to do this to my 1J swapped IS so I can fit a top mount turbo
You gotta do it! It cleans everything up so much.
@@RacecarAndChill it is a top priority for sure. Wasn't lucky enough to find a used one. But I am actually doing the battery relocation as we speak. Trying to get one that fits the spare tire well. But this is a great start for me to visually see what needs to be done. Really enjoy the channel for sure having a boosted IS myself.
@@oldhunterraziel5327 awesome! I didnt want to lose my spare tire, so that's why I put my battery where i did.
@@RacecarAndChill I don't have a spare 18" so I'm making use of the space. Weight reduction 🤣
@@oldhunterraziel5327 lol neither do I! But I want to keep the 17 so I can I can at least limp it home if I had to!
Bro.. looks so clean lol a few more wire looms and ur good to go.. Running so clean and mean As F lmao hell yeah ..
Thanks man! I appreciate the support! ❤
Can you somehow get the blueprints for the abs bracket? My brother has a 3d printer but hes no good with it. Planning on doing this soon too. Thanks for any help! Awesome guide man!
Edit: just saw theyre for sale. Im interested!
Sweet. I need to do this.
Only of you're planning on turboing that thing. 😉
@@RacecarAndChill eventually... lol
Why didn’t you use a battery box to contain the lead fumes from entering the cabin? Are you going to use a AGM battery? Nice kit for the abs is your friend going to start selling the 3D printed case for the abs?
The trunk isn't really sealed as you can see all the dust in there. There is a vent right by the battery, and I don't really daily drive the car, so I'm not worried about fumes much. The car doesn't run any cats and its burning oil, so there's no way I'm driving it with the windows up... 😅 But yea, we will be selling the 3D printed ABS bracket! It's pretty much finalized. Hit me up on IG if you're interested in one. @racecar_andchill
Super clean job !! Also What bov are you running ?
Thank you! I run the HKS. There are a lot of fake ones floating around so be careful when shopping around!
Ok thats why i thought, and perfect thanks !
Heres a link to the exact one I bought! amzn.to/2Sv7Bbk
What did you use to pressurize your master cylinder to properly bleed the ABS pump? Clean relocation btw. I did the same relocation but used a smaller battery from XS Power In the battery tray with the ABS pump.
I used a vacuum bleeder. I have not had any issues with it yet. It seems like I was able to get all the air out of the system this way. Another way of doing it would be to engage the abs and then bleed again. I'll be doing that if I have issues once I use the pump. I'll keep the channel updated if I have any issues. Make sure to subscribe so you dont miss the update!
Yeah you could go on a gravel road and lock the brakes up to activate the ABS if you need to.
@@mclex01 that's a good idea too!
Out of curiosity, do you still have the Altezza bracket?
You showed the ground in the engine bay but how did you connect the positive cable to the distribution block? The car side not battery side.
I cut the battery terminal off and wired it straight to the distribution block. The distribution block I used just needs the wire stripped and you can clamp it down.
Where's a link to the 3d printed abs bracket?
Are you able to sell the ABS module brackets? Lol
Just curious why didn’t you just delete abs?
I plan on road racing the car, and ABS would definitely make me faster.
could you post the abs module relocation holder on thingiverse?
Anything on the ABS bracket?
Yes... hit me up on ig if you're still looking for one. @stanlyshakedown
Where can i buy one of the abs mounts ?
what did you connect to distribution block?
How much are you selling the ABS bracket?
yo, do you have the stl file for the abs mount?
Where can I get that 3D printed abs holder/ housing
I printed it myself. Hit me up on Instagram for one. @racecar_andchill
Where did you find the brake lines?
Wait... you never finished saying... you said “my car is an 01, fortunately I have a parts car..” did you swap the abs block with an 02+ or is this still the 2001 abs block?
The abs blocks are different. I'm still using an 01 block.
RacecarAndChill ok cool... so you posted the diagram for 02-05, but you went over the 01 routing on ur block... cool! Appreciate that! Us non sticky dash guys got a little confused. Lol 😂 just ordered the same kit, for the same reason. Was going to just wrap the downpipe, but decided not to risk it. Did you run off the 3D printed mounts yet?
@@Remedy750 yessir! I just got the parts I need to get my printer back up and running today. Send me a message on Instagram and we can link up if you want a bracket. Selling them for $60 shipped with all the hardware. @racecar_andchill
RacecarAndChill bet! I’ll follow n DM you rn
where can i buy the bracket?
What exhaust are you running? Custom?
Yessir. It's a 3 inch straight pipe from the turbo back with a straight through muffler at the end.
The wastegate also dumps to the atmosphere
@@RacecarAndChill Good stuff!
@@kpzoreo thank you sir
where can I get an ABS bracket?
36:00