Extremely informative video - Well done! You just saved me at least a $100. My daughter doesn't even have this exact model but the frame and basic construction is the same. She broke the charging receptacle away from its mount inside and I had to figure out how to get at it to fix it. I never would have imagined having to take it this far apart to separate the case. Without this video I would have had to take it to someone else and pay them to fix it.
Dude, you’re a lifesaver! I idiotically steamed the bottom of my laptop and needed to take it apart to make sure every important piece was dry. This video saved me a trip to a technician, which would also mean keeping my laptop soaked in water for about a day before getting it fixed. Thanks to you, it works like a charm and I’ve learned something new (aside from “don’t cook your laptop”)!
Open Me Up! good presentation tutorial on how to upgrade RAM or SSD card on Lenovo ThinkPad E550, and E550c however just one fault your mike only worked 2/3 of the time. Please check your audio before presenting disassembly that way your audience can receive the full benefit of the disassembly. Thank you I learned a lot.
Hello, I've upgraded my z50-70 laptop with new battery and SSD. This would be just fine. But many years ago I was dumb and put my laptop for "cleannig" in unnamed company. Hovewer, they messed it up. After I got my laptop back the sound was not working... but that time I was using my external speakers so I did not noticed it. I found that many months later and of course I couldn't go back to the company that cleaned it as they would say that I broke it. (this is how our country works sadly) Well, OPEN ME UP for the rescue. With help of this handy tutorial I managed to open my laptop to the motherboard and I found that my speakers were not plugged in... So I plugged it in and closed back everything. And now speakers are working again with new battery and fast ssd. BUT!!! Here comes the big but! I somehow messed up something, becouse now my laptop won't wake from sleep mode. It can get into sleep mode. The power led is flashing slowly, but when I wake it up, the battery led and power led flashes for a sec and then both leds turns off. When I press the power button again it starts normally like it never was in sleep mode. Any ideas what could cause this? I though it was only some missing driver, but when I switched back to old drive it was still not waking up. Thank you very much for any help.
thats correct there is nothing wrong. there is many types of sleep. so when i put my computer to sleep, i have to press the power button to turn it on again from sleep. it looks like it is start again from the beginning but it is different to a total shutdown. test a shutdown and compare it to your sleep and you will understand what i am saying.
@@OpenMeUpTec Hello, thanx for reply, but you probably misunderstand my problem. It was working before. And when you put computer to sleep mode, all open programs stays open when you wake it up. But when I try to wake it up I must "wake it" twice. The first power button press will mess the computer so it shutdowns hard. The second power button press starts the computer in normal way (when it is off completely). Any idea what to do with that? Thank you very much.
@@jakubsenk4496 sorry I can not help you without seeing the problem. Since I most likely not experience this problem I can provide a solution without understanding it
Hello, I don’t know if you reply to comments anymore as this video is quite old but I was wondering how to remove the back cover. I am able to remove the 3 screws but I can not slide the panel off for some reason. Any help would be appreciated, thanks!
My same graphics card 840M is not getting detected anywhere(BIOS, Device manager - (even after checking the box to show the hidden devices) in my PC. Do I need to replace the GPU? or is there any other workaround? i have to keep my HD integrated graphics disabled in Device manager otherwise laptop goes to black screen with error and restarts again in the same loop.
@@OpenMeUpTec thank you for your reply. I have watched the whole video and it doesn't show how to remove the hinges. Do you perhaps have a link for the manual. Sorry but I have very little knowledge on how to do this.
@@marcanderson74 to remove the hinge you will need to do everything in the video up to 12.00. try searching up the laptop name with user manual. if you have little knowledge about this stuff then i wont recommend you to change the hinge
Hello, I want to replace the motherboard on my Z50-75, can I just follow the steps in this video to remove the motherboard, then follow them backwards once I have installed it?
hi great video , i have a G50-70 the screen flickers when i open it up , i have to move it back & forward to find a sweet spot to use it . so can i just replace the wire to the screen? or do i have to replace the screen ?
My laptop Lenovo g50 not opening properly because of two screws having fallen off from the bottom (dvd drive side) Hinges seems to be ok or might have been damaged how to fix it?
Very useful video :D thanks a lot! But i still have one question... by removing the back panel is the warranty lost? or only by removing the sticker that you mention it on the minute 7:19 ?
sticker only. they allow you to open your laptop up to change your ram and hard drive. dell allows you to open up your laptop and do whatever you want without voiding warranty as long there is no physical damage
Hi i want to put a SSD instead of the DVD slot but non of the adapters i see online have that tab for the one screw, is the drive in a cage that has the tab or is it a special kind of drive?
The screen of my Lenovo G50-70 sometimes freeze itself, it becomes "pixelated" and the colour of the screen slowly change to a bright white. Most of the time i just have to move a bit my screen and it will come back to normal, but sometimes it is useless and i have to force my pc to turn off. What could be the problem?
I took the fan out to give it a quick brush. I put everything back in place and checked it 3 times to make sure everything is right. Now, when turning the laptop on, the fan spins for about 3sec, then stops. the HDD sounds like its spinning,the power LEDs are on but I get no image on the screen and then the whole system dies. help pls? Lenovo Z50
@OPEN ME UP, Really Awesome Video. Thanks! I have Z50-70 and would like to ask is that how is Camera attached to Motherboard? I would like to know since i had to get my motherboard replaced and after that, my Camera doesn't work anymore. Whenever i open camera application(or anything that uses camera) it says "To get started, connect a camera". I checked for the drivers and all in device manager i COULDN'T EVEN find "Imaging Devices"(as far as i know i have to go and udate it) there. Your help would be like Saved by the God! Thanks Again!
Thank you for the video! I have a problem with my Lenovo G50-70 and have no knowledge on computers. My PC has resumed the habit of crashing. It is then impossible to restart it, unless I remove the battery& hold the power button several times. And it doesn't always work. I ran a hardware scan (by Lenovo solutions center). Everything seemed ok, but the problem persists. Can it be a hardware problem that I could easily fix (a bad contact?)? Any help would be greatly appreciated!
When does it restart. After using it for a while or. When it restarts does the restart intervals get smaller. I believe you have a fault component or your computer is over heating.
OPEN ME UP Thanks, such a quick answer. It normally crashes (it doesn't restart!) after working on it for a bit ( no gaming etc, but several open programs&tabs). Between yesterday and today it has been crashing right after starting it, today right away after having finished the hardware scan.
Hello, thanks so much this video was very helpful. I don't have this exact model I needed to fix my ac adapter (it slid into the computer and I was unable to charge it. It was working fine before I took it apart. Now It just continually goes through the power-up mode. Please help me. I'm frantic because I need this to homeschool, my kid, due to Covid-19 school shut down. Is it possible I did not reinsert the blue power tab properly? Thank you so much in advance.
i am not sure what you are asking. please watch the video and tell me at what time you are having issues with so i can understand what you are looking at
Absolutely brilliant. good work , man. I'd like to know if the headphone-combo jack is user replaceable. As in, is it a separate part and not attached directly to the motherboard or any other components ?
+Eshwer Shivaprakash it is user replacable. it isnt attached to the Motherboard. it is soldered to an seperate board together with usb port and the Card Reader. you can replace this board.
yes you can replace this board. this is what I meat by it is solder on. you going to replace the whole daughter board it is quite hard to come by unless you get it from Lenovo
I know that this is an old video but I have a question.. my brother bought the lenovo 750-70 in 2015 and he gave it to me in 2018. Now in 2020 this laptop is getting more slow than before so my question is, can I put some new SSD in Lenovo Z50-70? and graphics card? Thanks
@@scrimtellect new ram or more ram normally wont do much. the first upgrade is SSD, this is generally the best upgrade as there is a massive difference compared your old hard drive.
wait, so if i want to just change the thermal paste of my cpu and gpu i don't need to open up the keyboard up front and just need to open the back case?
Very good video, a question, if I change the motherboard of the Z50-70 from an I5 to an I7, is it necessary to reinstall everything in the operating system? only the CPU would change but not the HHD or ram.
OPEN ME UP I forgot the bios password and tried every possible software to reset it nothing worked. I will try to open it up and remove the CMOS and see what happen. If that doesn't work, i must replace the bios chip right!!
OPEN ME UP I know it's not a simple task and i'm not gonna to do it my self of course.. But what is the other choice/way i can do to remove the password
it is not going to happen the reason is first it is too complex the chip is too small for you to attempt it. the most important thing is you wont be able to find the bios chip to being with
hello @OPEN ME UP is there any way to change the touchpad? also my laptopo has a crack right under the usb 3.0 slot and i cant use it due to loos conection. what would you suggest?
yes there is a way to change the touch pad just take it out and replace it with another. at 9.40 you see me remove the keyboard cover, there you can also remove the touch pad. what cant you use the usb port or?
well i researched a little and it seems that i cant replace the touchpad, but i have to replace all the palmrest touchpad cover. yes i cant use the usb port because when i put the stick it conects and disconects and i cant put files or whatever else
hi :) i was using a broweser and its unfortunatly turned off. then cannt start, its not showing me if charging what can i do? i disassembled and nothing was wrong :
OPEN ME UP sorry for bad london :D Suddenly I turned off and could not get start with start button. No longer charging and laptop not showing me if it charging :/
i have one question... one time i open to clean my laptop and my keyboard .. and after that my keyboard work fine, exept the shift button ... the left one and the right one stoped after that clean... i go gently as i can but i am wondering if it is hardware or software problem . So my question is shouled i buy new one or it can be fixed ? tnx
@@kennethvistan7734 yes and no. this laptop only has one slot. therefore you can only choose one of them. the next issue is this laptop doesnt have a SIM card slot therefore you cant instead the sim so you really cant use 5G
@@kennethvistan7734 ok i think i understand what you are asking now. you were using the wrong words. you are asking for a WIFI card so you can use 2.4GHz and 5GHz. this there is many for this and you can just swap them out. 5G refers to mobile internet this is why i gave you the wrong answer. www.ebay.com.au/itm/Intel-8260NGW-dual-Band-wifi-adapter-2-4Gzhz-5GHZ/202934980745?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649
CPU is solder on, graphic card is solder on, ram can be changed to 16GB max with 8GB DDR3L in each slot and there is 2 slots, wireless card can be changed, and hard drive is a 2.5" inch.
CPU is solder on, graphic card is solder on, ram can be changed to 16GB max with 8GB DDR3L in each slot and there is 2 slots, wireless card can be changed, and hard drive is a 2.5" inch.
open up your laptop and buy the same one then it will resolve your issue. if you look up DDR3L it will tell you what the voltage is and there is only one. it is best if you look at what ram you have and buy the same one. since you already have it, it will tell you everything you need to know about what ram you need
CPU is solder on, graphic card is solder on, ram can be changed to 16GB max with 8GB in each slot and there is 2 slots, wireless card can be changed, and hard drive is a 2.5" inch.
thx for the reply.I d like to ask you that ı do some rendering and if ı upgrade my ram 8gb more will ı see a noticable diffrence in rendering time ? and whats to most important thing for render proccesor graphic ards or ram ?
ram is what you currently using unless you are using more than the current amount of ram it will do nothing. you can check this by going into task manger and see how much ram you using. if you using close you the amount you have you should get more ram if not it will do nothing
oh my God I don't even know how that I got the ram card out of its slot now that I do got it out I can't put it back in I try looking at different videos to see exactly how they open it to put the ram card back,but for the life of me I can't get it to go back in there and then I forgot which slot it is, because I only have one card that came with the Lenovo so I don't know which slot is the right slot so oh my God if you get this comment please somebody help me thank you namaste
there are 2 slots. it can go in any slot. but seriously if you cant put the ram back in after watching the video go out to the store and get help. the ram only can go in two ways it is like how you plug a usb in if one way doesnt work try the other way
Thank u...I got it back in.....put everything back the way u showed me, but now the screen won't come on....I'm really upset with myself about this, cause my mom just bought it for me,I haven't had it for a week when I fell asleep with a bottle of Kefir in my hand and my laptop at my side....it was closed but the Kefir got all in the ports and fan vent. So I immediately took the battery out and let it dry cause I was scared for it to run any further. But I only went as far as right before I was supposed to pop up the screen and so forth. So instead, what I did was take a tooth pick and alcohol (since it dissolves) to clean the Kefir off. Now that I put it all back, the screen doesn't come on. HELP ME......UUUGGGHHH..MY MOM'S GONNA KILL ME!!!! She couldn't afford insurance....UUUUGGGHH!!!!
Try to return it for warranty before you do anything then if the say no then come back to me no point of trying something if you have warranty. Make sure you clean hour laptop properly so they can not tell you drop water on it
Extremely informative video - Well done! You just saved me at least a $100. My daughter doesn't even have this exact model but the frame and basic construction is the same. She broke the charging receptacle away from its mount inside and I had to figure out how to get at it to fix it. I never would have imagined having to take it this far apart to separate the case. Without this video I would have had to take it to someone else and pay them to fix it.
thanks for your support
Dude, you’re a lifesaver! I idiotically steamed the bottom of my laptop and needed to take it apart to make sure every important piece was dry. This video saved me a trip to a technician, which would also mean keeping my laptop soaked in water for about a day before getting it fixed. Thanks to you, it works like a charm and I’ve learned something new (aside from “don’t cook your laptop”)!
thanks for your support
ยอดเยี่ยมมากครับ คุณนำเสนอได้ยอดเยี่ยมมากๆ
Open Me Up! good presentation tutorial on how to upgrade RAM or SSD card on Lenovo ThinkPad E550, and E550c however just one fault your mike only worked 2/3 of the time. Please check your audio before presenting disassembly that way your audience can receive the full benefit of the disassembly. Thank you I learned a lot.
+Raymond MC thanks for you support. i am looking to replace the mic
Very well explained, thanks for your time.
Thanks for your support
Hello, I've upgraded my z50-70 laptop with new battery and SSD. This would be just fine. But many years ago I was dumb and put my laptop for "cleannig" in unnamed company. Hovewer, they messed it up. After I got my laptop back the sound was not working... but that time I was using my external speakers so I did not noticed it. I found that many months later and of course I couldn't go back to the company that cleaned it as they would say that I broke it. (this is how our country works sadly) Well, OPEN ME UP for the rescue. With help of this handy tutorial I managed to open my laptop to the motherboard and I found that my speakers were not plugged in... So I plugged it in and closed back everything. And now speakers are working again with new battery and fast ssd. BUT!!! Here comes the big but! I somehow messed up something, becouse now my laptop won't wake from sleep mode. It can get into sleep mode. The power led is flashing slowly, but when I wake it up, the battery led and power led flashes for a sec and then both leds turns off. When I press the power button again it starts normally like it never was in sleep mode. Any ideas what could cause this? I though it was only some missing driver, but when I switched back to old drive it was still not waking up. Thank you very much for any help.
thats correct there is nothing wrong. there is many types of sleep. so when i put my computer to sleep, i have to press the power button to turn it on again from sleep. it looks like it is start again from the beginning but it is different to a total shutdown. test a shutdown and compare it to your sleep and you will understand what i am saying.
@@OpenMeUpTec Hello, thanx for reply, but you probably misunderstand my problem. It was working before. And when you put computer to sleep mode, all open programs stays open when you wake it up. But when I try to wake it up I must "wake it" twice. The first power button press will mess the computer so it shutdowns hard. The second power button press starts the computer in normal way (when it is off completely). Any idea what to do with that? Thank you very much.
@@jakubsenk4496 sorry I can not help you without seeing the problem. Since I most likely not experience this problem I can provide a solution without understanding it
@@OpenMeUpTec Nevermind, I'll look for answers elsewhere, I appreciate your reply.
Gracias, me salvaste la vida, Dios te agradecera este video
At 14:23, are you cleaning the thermal paste off the GPU?
Thank you for your time bro
u are the best
Thanks for your support
Do u know what thickness of thermal pads are there?(13:39, they are on heatsink)
nope. just get thicker one as when they press down it will spread out
Thanks for your time and effort.
thanks for your support
Hello, I don’t know if you reply to comments anymore as this video is quite old but I was wondering how to remove the back cover. I am able to remove the 3 screws but I can not slide the panel off for some reason. Any help would be appreciated, thanks!
just as the video shows you just have to remove the 3 screws and slide it. did you take out the 3 screws? dont leave them inside the hole
Bem difícil o acesso para se fazer a troca da pasta termica .😮
My same graphics card 840M is not getting detected anywhere(BIOS, Device manager - (even after checking the box to show the hidden devices) in my PC. Do I need to replace the GPU? or is there any other workaround? i have to keep my HD integrated graphics disabled in Device manager otherwise laptop goes to black screen with error and restarts again in the same loop.
it is dead. this i what happens when it is dead you can find it. your computer is working becaues it is using the HD intel graphic card
@@OpenMeUpTec thank you for the quick reply. Is there any way to replace it?
Just an update here, somehow graphics property in BIOS was not set to discrete, I did that and now I'm able to see the card in Device Manager 😁🤘👍
Really great video, thank you. I would really love to know how to replace the hinges on this laptop please. I need urgent help.
if you watch and follow the video to 12.00 you are half way there. you can download the user manual and it will tell you how to remove it
@@OpenMeUpTec thank you for your reply. I have watched the whole video and it doesn't show how to remove the hinges. Do you perhaps have a link for the manual. Sorry but I have very little knowledge on how to do this.
@@marcanderson74 to remove the hinge you will need to do everything in the video up to 12.00. try searching up the laptop name with user manual. if you have little knowledge about this stuff then i wont recommend you to change the hinge
Hello, I want to replace the motherboard on my Z50-75, can I just follow the steps in this video to remove the motherboard, then follow them backwards once I have installed it?
yes
@Ian Volkov Is the graphics card replaceable on z50-75? I believe my dedicated gpu died and i would like to replace it..
Thanks for this wonderful explanation, it helped me a lot, I have a question: can I replace the cream from the CPU without opening the motherboard
nope
Is the screw hole closest to the red battery switch needed? I can't find my and now wifi doesn't work anymore.
probably the antenna cable is not fully plugged in.
hi great video , i have a G50-70 the screen flickers when i open it up , i have to move it back & forward to find a sweet spot to use it . so can i just replace the wire to the screen? or do i have to replace the screen ?
most likely your cable is lose. try that first
Hi! Do you know how to clean this laptop's keyboard? One key stopped working and the main culprit is that there is dirt underneath it.
put it off and it will come off put the bottom part off first
My laptop Lenovo g50 not opening properly because of two screws having fallen off from the bottom (dvd drive side)
Hinges seems to be ok or might have been damaged how to fix it?
the only import screw are the hinge screw the rest if missing wont matter
Very useful video :D thanks a lot! But i still have one question... by removing the back panel is the warranty lost? or only by removing the sticker that you mention it on the minute 7:19 ?
sticker only. they allow you to open your laptop up to change your ram and hard drive. dell allows you to open up your laptop and do whatever you want without voiding warranty as long there is no physical damage
thanks for answering :)
Hi i want to put a SSD instead of the DVD slot but non of the adapters i see online have that tab for the one screw, is the drive in a cage that has the tab or is it a special kind of drive?
Put the SSD in the HDD slot, and the HDD in the DVD slot. Trust me, amazing results!
Thank's , very helpful
Thank you for your support
The screen of my Lenovo G50-70 sometimes freeze itself, it becomes "pixelated" and the colour of the screen slowly change to a bright white. Most of the time i just have to move a bit my screen and it will come back to normal, but sometimes it is useless and i have to force my pc to turn off.
What could be the problem?
probably loose cable
Thank you
How do you fix the loose cable problem?
I took the fan out to give it a quick brush. I put everything back in place and checked it 3 times to make sure everything is right.
Now, when turning the laptop on, the fan spins for about 3sec, then stops. the HDD sounds like its spinning,the power LEDs are on but I get no image on the screen and then the whole system dies.
help pls? Lenovo Z50
take out the ram and hard drive and tell me what happens
OPEN ME UP thank you for your reply. Switching the rams around fixed the problem
thanks good to hear
You an place a little magnet at the screwdriver. That helpt lifting the screw up or fix it again.
my screw drivers have weak magnets. normally i dont use this screw driver for disassembly
thank you so much it was very helpful :33 i was afraid to pop up my keyboard and this way is so much smoother
@OPEN ME UP, Really Awesome Video. Thanks! I have Z50-70 and would like to ask is that how is Camera attached to Motherboard? I would like to know since i had to get my motherboard replaced and after that, my Camera doesn't work anymore. Whenever i open camera application(or anything that uses camera) it says "To get started, connect a camera". I checked for the drivers and all in device manager i COULDN'T EVEN find "Imaging Devices"(as far as i know i have to go and udate it) there. Your help would be like Saved by the God! Thanks Again!
the cable is connected to your motherboard. they probably forgot to plug in the cable for the camera it is pretty normal
Thanks! for the reply. I hope it's just that.
try to buy it on ebay or just throw it away as buying it from lenovo will cost too much
it comes with it.
My microphone isnt working and if its hardware issue do i have to change the whole motherboard
no the mic is where the webcam is. it is a board and most companies use the same board
Thank you for the video! I have a problem with my Lenovo G50-70 and have no knowledge on computers. My PC has resumed the habit of crashing. It is then impossible to restart it, unless I remove the battery& hold the power button several times. And it doesn't always work. I ran a hardware scan (by Lenovo solutions center). Everything seemed ok, but the problem persists. Can it be a hardware problem that I could easily fix (a bad contact?)? Any help would be greatly appreciated!
When does it restart. After using it for a while or. When it restarts does the restart intervals get smaller. I believe you have a fault component or your computer is over heating.
OPEN ME UP Thanks, such a quick answer. It normally crashes (it doesn't restart!) after working on it for a bit ( no gaming etc, but several open programs&tabs). Between yesterday and today it has been crashing right after starting it, today right away after having finished the hardware scan.
Probably your ram might be faulty check that out first
Thank you! I`ll check that out.
If it is not the ram come back to me and I will tell you the next step
If I just want to replace the palmrest, do I need to remove the hard drive, wireless card, DVD drive and RAM slot one and two???
really helpful vid.
dvd drive and hard drive must be removed as they have screw under it the other dont affect anything
I by mistake broke the part that holds the blue tape ......the black bar part .....is there any way I can fix it?????
dont know what you are talking about. watch the video and tell when where it shows up at
Great video! But where is the bios battery?
at 12.45 in the video left of the ram slot and my hand. it is the blue ring and silver centre
please make video on How to replace camera
Hello, thanks so much this video was very helpful. I don't have this exact model I needed to fix my ac adapter (it slid into the computer and I was unable to charge it. It was working fine before I took it apart. Now It just continually goes through the power-up mode. Please help me. I'm frantic because I need this to homeschool, my kid, due to Covid-19 school shut down. Is it possible I did not reinsert the blue power tab properly? Thank you so much in advance.
i am not sure what you are asking. please watch the video and tell me at what time you are having issues with so i can understand what you are looking at
Hi. Does this laptop have the SPDIF via optical jack output? (toslink?)
nope
Absolutely brilliant. good work , man. I'd like to know if the headphone-combo jack is user replaceable. As in, is it a separate part and not attached directly to the motherboard or any other components ?
+Eshwer Shivaprakash it is attach, like any other laptop it is solder on to the motherboard. thanks for your support
+Eshwer Shivaprakash it is user replacable. it isnt attached to the Motherboard. it is soldered to an seperate board together with usb port and the Card Reader. you can replace this board.
yes you can replace this board. this is what I meat by it is solder on. you going to replace the whole daughter board it is quite hard to come by unless you get it from Lenovo
I know that this is an old video but I have a question.. my brother bought the lenovo 750-70 in 2015 and he gave it to me in 2018. Now in 2020 this laptop is getting more slow than before so my question is, can I put some new SSD in Lenovo Z50-70? and graphics card? Thanks
graphic card is soldred on. you can change the hard drive to an SSD
@@OpenMeUpTec uhh sir how about some new RAM?
@@scrimtellect new ram or more ram normally wont do much. the first upgrade is SSD, this is generally the best upgrade as there is a massive difference compared your old hard drive.
@@OpenMeUpTec Ok noted thanks!
@@OpenMeUpTec Sorry in advance but I still have a question, uhm can I change the processor from i5 to i7? thanks
Hi, do you know if it's possible change the keyboard with a backlit keyboard?
nope as there connector for the back light
Thank you very much
wait, so if i want to just change the thermal paste of my cpu and gpu i don't need to open up the keyboard up front and just need to open the back case?
I think u need to open the keyboard too
can u plz tell me what is model number of motherboard in Z50-70 which u showed us in this video
+Gitanjali Rudrawar nope as i dont have the item anymore to tell you. the video is a FHD video so try to watch it again and see if you can find it
Very good video, a question, if I change the motherboard of the Z50-70 from an I5 to an I7, is it necessary to reinstall everything in the operating system? only the CPU would change but not the HHD or ram.
just switch the board over and that's it, you don't need to do anything else. it will now show you have an i7 instead of an i5
Does removing the bios battery resets its password in this model??
it does for any laptop that newer. that was once the case for extremely old laptops but when the i series came out that could not be done anymore
OPEN ME UP
I forgot the bios password and tried every possible software to reset it nothing worked. I will try to open it up and remove the CMOS and see what happen.
If that doesn't work, i must replace the bios chip right!!
thats not going to work as replacing it is not a simple task
OPEN ME UP
I know it's not a simple task and i'm not gonna to do it my self of course..
But what is the other choice/way i can do to remove the password
it is not going to happen the reason is first it is too complex the chip is too small for you to attempt it. the most important thing is you wont be able to find the bios chip to being with
Can anyone tell me the dimension of screw for z50-70 model , in my laptop some screws are missing :) Thanks
look for the user manual and it will tell you all the screw sizes. it has something like M2.5x3
hello @OPEN ME UP
is there any way to change the touchpad? also my laptopo has a crack right under the usb 3.0 slot and i cant use it due to loos conection. what would you suggest?
yes there is a way to change the touch pad just take it out and replace it with another. at 9.40 you see me remove the keyboard cover, there you can also remove the touch pad. what cant you use the usb port or?
well i researched a little and it seems that i cant replace the touchpad, but i have to replace all the palmrest touchpad cover. yes i cant use the usb port because when i put the stick it conects and disconects and i cant put files or whatever else
you can replace the usb port if you know how to solder but if you dont then you have to replace the board it is sitting on
but the crack is on the outside plastic at the bottom, right down of the usb port
so if the usb has no damage then there shouldnt be an issue. Honestly i dont understand your issues
Hi, I want to put the motherboard from z50-70 in g50-45. Are there compatibility?
should not fit in but you can try
Just laptops in appearance are completely identical, thank you.
if thats so it probably will fit. the G and the Z series lenovo laptop use similar case and some the same
Hey Bro tanx for this vidios , you save my money .
Hi, how can I remove the clickpad? Thanks
yes you can you need to remove and follow the video till 9.50
hi :) i was using a broweser and its unfortunatly turned off. then cannt start, its not showing me if charging what can i do? i disassembled and nothing was wrong :
please type it again dont understand the issue
OPEN ME UP sorry for bad london :D Suddenly I turned off and could not get start with start button. No longer charging and laptop not showing me if it charging :/
this laptop requires a battery to turn on. so without a battery it i will not turn on. your battery is probably dead
OPEN ME UP thanks for answer, you are good man :)
which type of scrow you used to open the back panel
normal Phillips head screw driver
Hey can you help me? My pc's touch pad isnt working. What should i do?
Take it apart and plug it in. If that doesn't work then it is faulty
can you exchange the wifi m.2 whith nvme. and just use usb wifi
you can change the wifi m.2 for a m.2 ssd. you cant use a NVMe as it wont work in that slot
ty for the reply. In that case I would warher take out the dvd/blu=ray drive.@@OpenMeUpTec
Hi! First, thanks for this video. Second, do you know how can i do to disconnect the inbuilt mic and camera? Got a G50. Thanks!
you need to remove LCD cover to remove it. on the bottom it is connected to your LCD cable on the top it split out to LCD, backlight, Mic and Webcam
Im gonna upgrade memory and dust at the same time. thinking of going as far as 10 minutes into the dismantle. Is it worth it?
i have one question... one time i open to clean my laptop and my keyboard .. and after that my keyboard work fine, exept the shift button ... the left one and the right one stoped after that clean... i go gently as i can but i am wondering if it is hardware or software problem . So my question is shouled i buy new one or it can be fixed ? tnx
i think you broke your shift keys when you cleaned it. try to clean it again if that doesnt work then it is probably dead
yes still not working... its anoying to use usb keyboard just for the shift but i will buy new one i guess tnx for the reply btw
thanks for your support
Thank you so much for this helpfull video dude 👍☺️
thanks for your support
good work , thanks for the inf
+Tahir Ali thanks for your support
were is the cmos battery?
at 12.15 a silver round thing with blue border on the left hand side of the bottom ram slot
Thanks man.
Thanks
What is the purpose of the wireless card, is it upgradable?
yes you can upgrade it with anything the fits in the slot
Can i upgrade it so that it supports 5g wifi? how do i know if i will be buying is compatible?
@@kennethvistan7734 yes and no. this laptop only has one slot. therefore you can only choose one of them. the next issue is this laptop doesnt have a SIM card slot therefore you cant instead the sim so you really cant use 5G
is there a wifi card that support 2.4 and 5g?
@@kennethvistan7734 ok i think i understand what you are asking now. you were using the wrong words. you are asking for a WIFI card so you can use 2.4GHz and 5GHz. this there is many for this and you can just swap them out. 5G refers to mobile internet this is why i gave you the wrong answer.
www.ebay.com.au/itm/Intel-8260NGW-dual-Band-wifi-adapter-2-4Gzhz-5GHZ/202934980745?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649
Hi, i'd like to ask you, it is possible to change graphics card?
+Tomas Peistaras (LithuanianDude) nope it is solder on. It is written in the description
Does it have a back light
nope
Great video, I wish to know how to remove CMOS battery for reset password bios...pls help me, thnx
the bios battery does not reset the password.
So is it possible to replace HDD with SSD with this model?
Yes, I've done it, it's way much faster than before of course, everything is fast.
Can we change the cpu in g50-70,?
CPU is solder on, graphic card is solder on, ram can be changed to 16GB max with 8GB DDR3L in each slot and there is 2 slots, wireless card can be changed, and hard drive is a 2.5" inch.
i'll say thank you so much
you only do this and you have a like and subscribe for me
thanks for your support
thank you so much bro
thanks for your support
2:18 is that the wwan?
yes
what screwdriver are you using
www.ebay.com.au/itm/45in1-Torx-Precision-Screw-Driver-Tool-Set-Kit-Repair-Cell-Phone-PC-Laptop-Tools-/261942475129?hash=item3cfcfcf979:g:bLwAAOSwu4BVinUS
Now, how do i put it back :(
watch the video in backwards or do the opposite of taking it apart which is doing the steps in reverse
Whare to insert sim card
there is none or it is you need to remove the battery to access the slot cant remember. it should be near the battery connector pin
How can i change the display?
dont bother if is going to cost you too much
ok
and microphone is integrated in the screen
nope it is near the webcam
i will post a vid you have skype?
does Lenovo z50-70 support ddr4 ram?
nope. ddr4 is different size to ddr3 so it can only be one or the other
Which do you use RAM's? I have 2 slots too but i have 4 gb ram i want to buy +4gb ram can you help me?
CPU is solder on, graphic card is solder on, ram can be changed to 16GB max with 8GB DDR3L in each slot and there is 2 slots, wireless card can be changed, and hard drive is a 2.5" inch.
OPEN ME UP Which RAMs do you use? Can you give me detailed information? Brand, voltage, speed etc.
open up your laptop and buy the same one then it will resolve your issue. if you look up DDR3L it will tell you what the voltage is and there is only one. it is best if you look at what ram you have and buy the same one. since you already have it, it will tell you everything you need to know about what ram you need
OPEN ME UP I want buy 4 GB but i cant find true idea can you suggest me? ( i couldnt find same brand)
anything that is DDR3L Sodimm will work. brand doesnt do anything.
Thank You !!!!!
thanks for your support
nice screwdrivers
I used to have one exactly like that
is it possible to change graphic cards in tis model ?
CPU is solder on, graphic card is solder on, ram can be changed to 16GB max with 8GB in each slot and there is 2 slots, wireless card can be changed, and hard drive is a 2.5" inch.
thx for the reply.I d like to ask you that ı do some rendering and if ı upgrade my ram 8gb more will ı see a noticable diffrence in rendering time ? and whats to most important thing for render proccesor graphic ards or ram ?
ram is what you currently using unless you are using more than the current amount of ram it will do nothing. you can check this by going into task manger and see how much ram you using. if you using close you the amount you have you should get more ram if not it will do nothing
nice video
thanks for your support
can this laptop use egpu?
any laptop can as long you got the right one
sorry but i dont know where pci e slot is :< can you tell me where it is
you dont have a spare pci e slot for you to use a external graphic card
that so sad :< thanks for your help
you can take out the wifi card out and use the connecter
oh my God I don't even know how that I got the ram card out of its slot now that I do got it out I can't put it back in I try looking at different videos to see exactly how they open it to put the ram card back,but for the life of me I can't get it to go back in there and then I forgot which slot it is, because I only have one card that came with the Lenovo so I don't know which slot is the right slot so oh my God if you get this comment please somebody help me thank you namaste
there are 2 slots. it can go in any slot. but seriously if you cant put the ram back in after watching the video go out to the store and get help. the ram only can go in two ways it is like how you plug a usb in if one way doesnt work try the other way
Thank u...I got it back in.....put everything back the way u showed me, but now the screen won't come on....I'm really upset with myself about this, cause my mom just bought it for me,I haven't had it for a week when I fell asleep with a bottle of Kefir in my hand and my laptop at my side....it was closed but the Kefir got all in the ports and fan vent. So I immediately took the battery out and let it dry cause I was scared for it to run any further. But I only went as far as right before I was supposed to pop up the screen and so forth. So instead, what I did was take a tooth pick and alcohol (since it dissolves) to clean the Kefir off. Now that I put it all back, the screen doesn't come on. HELP ME......UUUGGGHHH..MY MOM'S GONNA KILL ME!!!! She couldn't afford insurance....UUUUGGGHH!!!!
Try to return it for warranty before you do anything then if the say no then come back to me no point of trying something if you have warranty. Make sure you clean hour laptop properly so they can not tell you drop water on it
No I didn't drop water on it...I dropped kefir on it...that's liquid yogurt
Just make sure they don't know
plz dont reply to me ₩ith "thanks for your support"
Better a woman in bed, not a laptop 🤣