Dyson Vacuum Says Airway Blocked - No blockage? How I fixed this issue

If there is blockage in the dyson vaccum, its display will say "Airway Blocked" and there won't be enough power to vacuum things up.
First, you would need to disconnect the parts and check if there is any blockage.
If there is no blockage, the problem is due to the filter.
Remove the filter and clean it to remove any dust on the surface of the filter.
Install the filter back and retry.
If it is still not working, the way I have tried is use water to clean the filter.
Yes, it might damage the filtration effect of the original filter but it did solve the problem for me.
Remember to dry the filter before install it back to the Dyson Vacuum.

[@toolcroze]

Here's my article on various other factors that might cause the Dyson Vacuum Airway Blocked Issue
Read: toolcroze.com/dyson-vacuum-says-airway-blocked-but-no-blockage/

[@anotherOneMore7]

Misleading. This video shows how to fix warning when there actually IS an easily identified blockage. The title implies a fix when no obvious blockage.

[@mabrelllee6506]

At minute 2:22, there is a solution I have tried that actually solves the issue. Thank you.

[@shelbymustang3049]

I concur. Misleading

[@SebastianGMarinescu]

I also concur, but I also found the solution in my situation: De-connect the battery, put it back in, done. I'm guessing the sensor needed a "restart".

[@guuslamers5730]

I did everything but still im getting the airways blocked signal

[@DjWarpedcore]

You have to take the hoover apart to the bare bones , What happens is there are all these little compartments inside the hoover these get clogged up with compacted dust and the only way to get to them is take it all apart! Proper bad design flaw ! had to do it loads with mine , as soon as you do it , it is like a new hoover until they get clogged up again

[@DjWarpedcore]

what you are doing here is a temporary fix what you have to do is a lot more involved with mine all the little compartments inside the hoover get blocked up with dust so what they do is clog the filter up quite fast and also can give a blocked error even after you clean the filter and obvious airways, I have to take the hoover completely apart to the bare bones and you will be amazed how much of the hoover ends up with compacted dust inside these little parts , as soon as you clear them it is like a new hoover until they start getting clogged up again but solves the problem for months

[@DrawnSean]

This helped me thanks!

[@chiganuggoo9929]

Good gosh what a ridiculous video.

[@shelbymustang3049]

Sorry. This video is misleading and not very useful.