Thanks so much! We purchased an 875 and one of my kids accidentally changed the lock. I was able to do it in about 10 minutes of watching your video.👍👍👍
I picked up 3 of these locks in like new condition for almost nothing because they were store returns and nobody knew the combo. Watched your video and had all of them open in under 6 minutes each (must be what the level 6 stands for). Planning on using them on gates to keep trespassers out & other basic low security needs. Tip: instead of using your hand to keep pressure on the shackle, I set the locks loosely upside-down and crosswise in a vise and then hung a heavy chain thru the shackle to apply consistent pressure. Much more comfortable and keeps both hands free to check the dials.
THANK YOU VERRY MUCH!!! I accidentally changed the lock i was afraid of my dad and family if they found out i changed it and forgot...Thanks to you i finally got it unlocked in under 10 mins
Sir: after watching your video I bought a Master 875d and scrambled the combination number, but took a smart phone photo to record the number in case I couldn't open it. I tried for some time unsuccessfully, until I finally got the knack. Now I can open the lock in 2-3 minutes ever time. Here is my suggestion: I put a magic marker thru the hasp so I can apply more pressure on it after turning the dials, and no pressure while turning. With a lot of pressure on the hasp the difference between the false gates and true gates becomes obvious, now I am an expert....thanks for the interesting video. Update: Now I can open this lock in 30-40 seconds. A real first rate video, thanks.
I did it !! It is a challenge with my boys, whoever does it, the reward will be money. a way to get away from stupid devices, and they see that RUclips is also for learning, maybe some of this could save them from some problem. survival is what new generations need to learn. this is analog, not digital or virtual ... you have to think, hear it, feel it, intuit it. the word for this challenge is, just do it! Thank you!!!
had a family member years ago that was a Locksmith professionally one day i stopped in the shop and needed several keyedpadlocks keyed alike he told me the LASDA ones were the best value so that’s what i bought ? i had never heard of them before that but they did work well for over 20 years and several i used outdoors from time to time i was pretty good about lubing them with Graphite ? and occasionally a squirt of WD40 as i used the on my boat trailer couplers and would often spray the hardware on the trailers with WD 40 as they were usually parked inthe weather most of their lives i owned them
It looks easier than what it is, I’m still trying to open two of those, one of my guys set up the combination and is gone so now I’m stocked with two pretty new padlocks 🔒
I watched it over and over but this method doesn't seem to work on my 875 padlock. The wheels just don't behave as shown here. My lock looks identical to the one here, except the I and II combination setting marks are recessed instead of raised as in the video, and the serial number has a couple additional digits - 3220BQ. Perhaps my lock is an older or newer (maybe improved) version?
Did you ever figure it out? This video is pretty deliberate in the explanation. You do have to put pressure on the hinge for it to see the difference between whether you got the right/wrong number.
Same here. Mine has the recessed I and II plus two extra digits (also BQ) and every position on all 4 wheels feel the same, so I am unable to crack it after many many tries.
i have a 175 master combination lock i was able to open it but i have no clue how to figure out the combination. the key i have to be able to reset it wont go in as it needs to be in the old combination to be able to chage ...what do i do?
Thing is, mine is stuck on a contico tool box and I can't get it off because I don't know the combination. I followed the steps in your video. But it doesn't work. Can you please help me? Make sure to reply back TOMORROW!!!!!! 😭😭
Yeah, I know right, Home Depot uses these everywhere, they use it on their cage items, they use it on their storage sheds, I like walking around and just unlock and everything
![[631] Master Lock 875/975 Decoded WITHOUT ANY TOOLS !](http://i.ytimg.com/vi/bfDPtt-bnAI/mqdefault.jpg)
![[631] Master Lock 875/975 Decoded WITHOUT ANY TOOLS !](/img/tr.png)
Very informative and helpful but good lord man! I feel older waiting for the final results
Thanks so much! We purchased an 875 and one of my kids accidentally changed the lock. I was able to do it in about 10 minutes of watching your video.👍👍👍
Thanks for the reset tip. I found one of these the other day laying in a parking lot. Luckily it was still open. So now I have a nice lock.
I picked up 3 of these locks in like new condition for almost nothing because they were store returns and nobody knew the combo. Watched your video and had all of them open in under 6 minutes each (must be what the level 6 stands for). Planning on using them on gates to keep trespassers out & other basic low security needs. Tip: instead of using your hand to keep pressure on the shackle, I set the locks loosely upside-down and crosswise in a vise and then hung a heavy chain thru the shackle to apply consistent pressure. Much more comfortable and keeps both hands free to check the dials.
THANK YOU VERRY MUCH!!! I accidentally changed the lock i was afraid of my dad and family if they found out i changed it and forgot...Thanks to you i finally got it unlocked in under 10 mins
Thank you for the heck I bought one of these locks at a thrift store for two bits and it worked well
Sir: after watching your video I bought a Master 875d and scrambled the combination number, but took a smart phone photo to record the number in case I couldn't open it. I tried for some time unsuccessfully, until I finally got the knack. Now I can open the lock in 2-3 minutes ever time. Here is my suggestion: I put a magic marker thru the hasp so I can apply more pressure on it after turning the dials, and no pressure while turning. With a lot of pressure on the hasp the difference between the false gates and true gates becomes obvious, now I am an expert....thanks for the interesting video. Update: Now I can open this lock in 30-40 seconds. A real first rate video, thanks.
I did it !!
It is a challenge with my boys, whoever does it, the reward will be money. a way to get away from stupid devices, and they see that RUclips is also for learning, maybe some of this could save them from some problem. survival is what new generations need to learn. this is analog, not digital or virtual ... you have to think, hear it, feel it, intuit it.
the word for this challenge is, just do it!
Thank you!!!
Video starts at 18:34
Thank you!
had a family member years ago that was a Locksmith professionally one day i stopped in the shop and needed several keyedpadlocks keyed alike he told me the LASDA ones were the best value so that’s what i bought ? i had never heard of them before that but they did work well for over 20 years and several i used outdoors from time to time i was pretty good about lubing them with Graphite ? and occasionally a squirt of WD40 as i used the on my boat trailer couplers and would often spray the hardware on the trailers with WD 40 as they were usually parked inthe weather most of their lives i owned them
Someone accidentally recoded one our locks and thanks to this video I was able to reset it.
It looks easier than what it is, I’m still trying to open two of those, one of my guys set up the combination and is gone so now I’m stocked with two pretty new padlocks 🔒
Great video never done one in my life just found a brand new one in street and opened it in 5 mins with your help thx your the man
YOU ARE A GENIUS BRAH...TVM
Thank you! I had forgotten my Combo and followed your technique and it worked. LOL! Thanks Again!
Thank you for your help
That was very useful thank you. Didnt think it would work
i have Soligen Germany Padlock and i thing 175 type but i still can't feel for four disc rotations .... yeah maybee i didn't practice enough
I watched it over and over but this method doesn't seem to work on my 875 padlock. The wheels just don't behave as shown here. My lock looks identical to the one here, except the I and II combination setting marks are recessed instead of raised as in the video, and the serial number has a couple additional digits - 3220BQ.
Perhaps my lock is an older or newer (maybe improved) version?
Did you ever figure it out? This video is pretty deliberate in the explanation. You do have to put pressure on the hinge for it to see the difference between whether you got the right/wrong number.
Same here. Mine has the recessed I and II plus two extra digits (also BQ) and every position on all 4 wheels feel the same, so I am unable to crack it after many many tries.
That LSD lock is a real trip. 🤪
i have a 175 master combination lock i was able to open it but i have no clue how to figure out the combination. the key i have to be able to reset it wont go in as it needs to be in the old combination to be able to chage ...what do i do?
Thing is, mine is stuck on a contico tool box and I can't get it off because I don't know the combination. I followed the steps in your video. But it doesn't work. Can you please help me? Make sure to reply back TOMORROW!!!!!! 😭😭
Thank you for the hack that was pretty simple
Thanks for the set up tip!
Yes thanks you so much!
THANK YOU VERY MUCH!!!!
Lo hize y me funciono gracias
It took me about 40 minutes to complete but it rlpy works with any master combination lock
just unlocked a m175 using this trick!!
That’s it’s simple thank to you master
bought a new lock at swap meet( home depot auctions) and lock was locked without combination, used your method to reset, Thank you
The masterlock roast
Thanks
That's had problems setting the combo
Worked for me
Dude, Waffle on much ?? fell asleep waiting.
Wtf what the heck it worked?
Yeah, I know right, Home Depot uses these everywhere, they use it on their cage items, they use it on their storage sheds, I like walking around and just unlock and everything
Your slow talk NEVE RACKING.
Jesus christ this guy is slowwwwww.
Thank you