Hi great video!!!. Quick question, do these seeting apply to a pavo35 as well ? Just bought one as my first drone. Currently binding the 03 air unit to my dji controller 2 and fpv googles v2. Thanks!
One second let me check (but) the settings in the troubleshooting video do.. As for the UART.. will check their site... ruclips.net/video/LEw5Gha1eRo/видео.html
For sure do a CLI dump before experimenting or changing the setting.. this way you can put them back on if things go bonkers. Try to bind the goggles and rc if you got the bind and fly version. However either way you will have to Configure the Remote controler. That part is in the troubleshooting video. Strange how betaFPV doesn't just throw the UART settings as a PDF on their site.. But they will send it as a PDF if you ask them. Just ask them for the UART settings. It's a different chip so hard to say and in the comments section for the CineLog 35 on the BetaFPV site, someone shared that it's wired wrong. Nice drone by the way.. Kind of reminds me of the geprc cinelog 35 Support ticket if videos don't work support.betafpv.com/hc/en-us/requests/new Better version of BetaFlight that works through the chrome browser. app.betaflight.com/# UART setting found here - scroll down towards the bottom betafpv.com/products/toothpick-f722-2-6s-aio-brushless-flight-controller-35ablheli_s
@@How-to-by-Lou Great information for us beginners. Appreciate the reply! Will follow the video first and see where I land. I was debating either to get the cinelog 35 or pavo35. the pavo seemed more of a challenge and a good start lol, so here we are.
Hi, I have a problem. I have set up everything as you said and I don't know what UART is on my controller. I have a Jumpet T-PRO V2 ELRS type.... I have a Pavo 25 v2 with O3 unit I am struggling for many days to be able to BIND my controller with the drone. Please help me a lot !
You might want to try this one.. Hope this helps.. Let us know how it goes.. ruclips.net/video/LEw5Gha1eRo/видео.html check the receiver section - try changing that from SUBS to your crossfire experience.. 5:09 If not for sure captain drone might have a a solution or the forum on Bradwalls Site for sure.. Let us know how it goes..
Is this setup with the DJI Controller 2? I’ve spent the last 3 days trying to set my Pavo25 V2 up with the controller 2 and they refuse to work together. I’m just about to give up on it all if I can’t fix it soon.
how do I change to blujay, I use the bluejay configurator and it says esc cannot be read even though I have given it power from the battery. Using the manufacturer's default ESC program feels very wasteful on the battery
Yeah - but if you are new to FPV it could be challenging . If you download the PID tuning you can open the PID-Tuning-3 file you will have a much better experience flying in "Angle Mode" Just remember to copy or do a dump all to save current settings incase you want to put them back. Hope this helps.. github.com/flight-commander/pid-tuning/blob/main/Pid-Tuning.zip
@@How-to-by-Lou im not new in fpv, so for this problem im disconcert! I have a simply solution to test and its put a cap+vts diode just right in battery pads and go to blackbox if change anything
I am running ELRS and DJI 03 air unit in my Pavo 25. The receiver is bound but still no WONT ARM. Any ideas PLEASE HELP I have been at this for a week so far and no one seems to know whats wrong...
@@NoviceQuads try this … hope this helps..let us know how it goes. Pavo Pico not working - how to get the pavo pico started, pavo pico troubleshooting ruclips.net/video/LEw5Gha1eRo/видео.html
@How-to-by-Lou Thanks for responding so fast. Thanks to RUclips University, I found out there are versions out there using Uart3 and Uart6. I switched to Uart6 and Bingo.
is there barometer in Pavo 25? I want to add GPS, but I'm not seeing Barometer light in Betaflight. (there is a Barometer in Pavo Pico, but no in Pavo 25? )
Will scrub through it when I can back so you can find the he exact timeline when we run the test to see if their is a barometer ruclips.net/user/liveNIm957ju0-0?si=GajjlToxFtJ6Muhh
the mini 2 SE video settings are different from the pavo25 v2 here are the video spec setting for the DJI Mini 2SE.. Hope this helps.. 2.7K: 2720×1530@24/25/30 fps FHD: 1920×1080@24/25/30/48/50/60 fps
So useful you wouldn't believe it, thank you
Hi great video!!!. Quick question, do these seeting apply to a pavo35 as well ? Just bought one as my first drone. Currently binding the 03 air unit to my dji controller 2 and fpv googles v2. Thanks!
One second let me check (but) the settings in the troubleshooting video do.. As for the UART.. will check their site...
ruclips.net/video/LEw5Gha1eRo/видео.html
For sure do a CLI dump before experimenting or changing the setting.. this way you can put them back on if things go bonkers.
Try to bind the goggles and rc if you got the bind and fly version. However either way you will have to Configure the Remote controler. That part is in the troubleshooting video.
Strange how betaFPV doesn't just throw the UART settings as a PDF on their site..
But they will send it as a PDF if you ask them. Just ask them for the UART settings. It's a different chip so hard to say and in the comments section for the CineLog 35 on the BetaFPV site, someone shared that it's wired wrong.
Nice drone by the way.. Kind of reminds me of the geprc cinelog 35
Support ticket if videos don't work
support.betafpv.com/hc/en-us/requests/new
Better version of BetaFlight that works through the chrome browser.
app.betaflight.com/#
UART setting found here - scroll down towards the bottom
betafpv.com/products/toothpick-f722-2-6s-aio-brushless-flight-controller-35ablheli_s
@@How-to-by-Lou This is a great video! thank you!
@@How-to-by-Lou Great information for us beginners. Appreciate the reply! Will follow the video first and see where I land.
I was debating either to get the cinelog 35 or pavo35. the pavo seemed more of a challenge and a good start lol, so here we are.
Hi, I have a problem.
I have set up everything as you said and I don't know what UART is on my controller.
I have a Jumpet T-PRO V2 ELRS type....
I have a Pavo 25 v2 with O3 unit
I am struggling for many days to be able to BIND my controller with the drone.
Please help me a lot !
You might want to try this one.. Hope this helps.. Let us know how it goes.. ruclips.net/video/LEw5Gha1eRo/видео.html
check the receiver section - try changing that from SUBS to your crossfire experience.. 5:09
If not for sure captain drone might have a a solution or the forum on Bradwalls Site for sure..
Let us know how it goes..
why are the sliders in PID tuning grayed out?
maybe the drone isn't connected.. try using a data cable. it should do the trick.
Is this setup with the DJI Controller 2? I’ve spent the last 3 days trying to set my Pavo25 V2 up with the controller 2 and they refuse to work together.
I’m just about to give up on it all if I can’t fix it soon.
Try the troubleshooting video. Am using the sam remote as you .. Hopefully it's not your pins..
ruclips.net/video/LEw5Gha1eRo/видео.html
how do I change to blujay, I use the bluejay configurator and it says esc cannot be read even though I have given it power from the battery. Using the manufacturer's default ESC program feels very wasteful on the battery
the esc configurator will brick your flight controller. Just stick to betaflight. Everything here is PNP = plug and play and done through betaflight.
Hey, the pid tunnig are you put this values or the drone come whit this pids?
Yeah - but if you are new to FPV it could be challenging . If you download the PID tuning you can open the PID-Tuning-3 file you will have a much better experience flying in "Angle Mode"
Just remember to copy or do a dump all to save current settings incase you want to put them back. Hope this helps..
github.com/flight-commander/pid-tuning/blob/main/Pid-Tuning.zip
@@How-to-by-Lou im not new in fpv, so for this problem im disconcert! I have a simply solution to test and its put a cap+vts diode just right in battery pads and go to blackbox if change anything
@@argentinaerialsFPV Interesting.. Just had a peak at your channel.. That is some amazing flying.. One day I hope to fly like that..
@@How-to-by-Lou thanks! 3 years flying everyday! So much flight time and practice
I am running ELRS and DJI 03 air unit in my Pavo 25. The receiver is bound but still no WONT ARM. Any ideas PLEASE HELP I have been at this for a week so far and no one seems to know whats wrong...
@@NoviceQuads try this … hope this helps..let us know how it goes.
Pavo Pico not working - how to get the pavo pico started, pavo pico troubleshooting
ruclips.net/video/LEw5Gha1eRo/видео.html
@How-to-by-Lou Thanks for responding so fast. Thanks to RUclips University, I found out there are versions out there using Uart3 and Uart6. I switched to Uart6 and Bingo.
is there barometer in Pavo 25? I want to add GPS, but I'm not seeing Barometer light in Betaflight. (there is a Barometer in Pavo Pico, but no in Pavo 25? )
Will scrub through it when I can back so you can find the he exact timeline when we run the test to see if their is a barometer
ruclips.net/user/liveNIm957ju0-0?si=GajjlToxFtJ6Muhh
Yours is the first question answered in the live segment
Hope this helps
ruclips.net/user/liveNIm957ju0-0?si=GajjlToxFtJ6Muhh
Thx 😎👍
ruclips.net/video/Sjz0gvIZ7N4/видео.html 🙃
I have the Pavo25 v2 BUT I try to setup the led strip but never turn on with the user1, do you have any idea?
Hey - try the troubleshooting video - hope this helps
Let us know how it goes
ruclips.net/video/LEw5Gha1eRo/видео.htmlsi=WHkIhUtdm1HAv4nU
How would you rate this drone for indoor cinema use with a naked gp? Have you tryd it?
If you know how to fly go for it ,,,,there is a video online somewhere of a fella flying it with an amazing camera on it..
I tried to fly with Osmo Action 4. (153 gramm). Pavo 25 flies about 5 min with it, no problem. I would give it 10/10.
Hello, I have a DJI Mini 2 SE drone. I can shoot 2.7k 30fps video. Can I make this at 2.7k 60 fps?
the mini 2 SE video settings are different from the pavo25 v2 here are the video spec setting for the DJI Mini 2SE.. Hope this helps.. 2.7K: 2720×1530@24/25/30 fps
FHD: 1920×1080@24/25/30/48/50/60 fps
Why i only can use AUX1 to AUX4..? AUX5 or above cannot use
that's just how they were built for things to be used on the board that way..
How do I set up the DJI controller UART?
Hi @ 1:28 you can watch and see the UART setup
Or you can watch the troubleshooting video
ruclips.net/video/LEw5Gha1eRo/видео.htmlsi=RpXw2U_UmS138h1G
@@How-to-by-Lou Thank you. It was very helpful.
@@How-to-by-Lou working! Thank you. I will subscribe. Please teach me a lot.