The house I grew up in had metal shingles and it was 'bullet proof'. The house was torn down in 2017 and was 100 years old with the original roof. After my grandparents died and my uncles and aunts sold the place the new owners didn't have annual termite control done... All it took was a decade of that and the house was damaged so much it was uneconomical to repair due to the termites being in the entire floor and every wall (East Texas Huntsville area where the termites are Texans too, bigger and bader, haha)
Truly informative! I needed a reference that highlighted basic wood frame construction methods & techniques where ruclips.net/user/postUgkxYGamVaHfdHiPlAQaLa7zkwR02OKpGYDU were best. I am pleased with the depth and clarity of Ryan’s Shed Plans. It was really convenient to capture!
Looks great! We put a metal Shingle roof product on our Straw Bale house in Florida 25 years ago. It still looks great. Zero issues despite 5-6 Hurricanes.
Love the Build Show. As an HVAC contractor/trainer innovative ideas get me excited. It doesn't have to be HVAC, building in general and next level thinking is something that keeps my mind wanting to create a better wheel.
I put these exact same Edco shingles on my house 10 years ago. They look like the day they were installed. Great product. I have no affiliation with the company. Looks like slate from the ground. The only downside is to make sure you put snow stops on as, like many metal roofs, snow will avalanche.
I am a fan of metal roofing. It's easy to install, looks great, and may last the lifetime of the house. The only drawback I have encountered was trying to find matching replacement panels to repair a small section of roofing that suffered damage from a fallen tree. The particular shake pattern was discontinued by the manufacturer a few years after we installed it. I searched all accross the nation to find something compatible without success. I ended up replacing the entire roof with galvalume standing seam as I was assured the profile and color would always be available.
Good point. I guess buying a textured metal roof is like buying that unique Italian ceramic tile for your kitchen or bathroom. Buy extra in case of later damage.
It’s great! My shed has been completed and it turned out nice looking and sturdy and it is way better than the sheds that many of my neighbors had put up. Of course, I'm pleased with the outcome and this Ryan’s ruclips.net/user/postUgkxGZedDTcDfgD7fG_uU4esfx_EgxzlY2_1 Plans was extremely useful to me as a guide.
This is exactly the kind of product I have been looking for. I love standing seam but it doesn’t always look right on some buildings. This is a great option for a traditional look.
I lived in a house that was built in 1980, it had a metal roof that looked like tiles, but the advantage was the sheets came in 6 metre lengths, the house was rated for 220kph winds, as we lived in a Cyclone Area.
It was $33,000 in materials to do my house. I paid $4,000 for shingles. I can replace my roof every 15 years for the next 120 years before I hit the metals cost. At 120 years the metal will most likely need replaced. I just couldn’t.
@@cybertrk for which? I’m not worried on a house I built and I’ll die in but it can’t change much. All houses are 500% over valued right now so I don’t think it matters for a few grand.
I love a good metal roof, I don’t do Mutch roofing anymore, but 25 years ago I used to install Girard, Decra. Granulated steel tile. It was an awesome roof if it was installed right. unfortunately, I have repaired many granulated steel tile roofs. Failure always came in when a installer just don’t care. I like this style of roof because you lay your 1” x 4” vertically then 2” x 2” horizontally, and then you can insulate in between the bats. Something you should appreciate insulated roof. It really helped break that thermal transfer. When we started, we use smooth shank nails, and we found that they would back out through time. Then we went to ring shank nails. Made it harder to repair them, but really tied everything together. I find myself doing repairs on them occasionally because there isn’t a lot of steel tile installers out there.
I'm going to guess the answer is going to be, "Not very". You couldn't very well anchor mounting rails through the roofing without crushing it, and if you were to cut slots in the shingles so tabs for the rails could poke through you'd lose almost all of your weather protection.
We have metal shingles on our roof and we asked for a quote for solar panels this summer and the installer refused because of this kind of roof. He cannot guarantee the roof won't leak and void the warranty.
How is repair? Would love for repairs to be discussed during videos so we have the full info, thank you very much for your videos and the work you put in for us mat, amazing work!
Great question but with it you need to answer why it would require repair? Asphalt is more likely to require repair given similar circumstance. But I suspect a repair is going to rely on sealants for this roof, like butyl.
only in a perfect world are repairs not needed.... i am not saying it wont stand the test of time and nature but in other circumstances like an addition of a plumbing vent in the future?
We just had this roof installed in the spring, over 2,600 sq ft went up in a day and it's been great. The neighbors are all commenting about how good it looks and we are planning a solar installation hopefully before the end of the year. This is the last roof I will ever put on a house thankfully.
I would definitely NOT recommend using this type of metal roofing for solar. Source: I own a solar company that just crested 55,000 installs. I wouldn’t consider anything but a ground mount were I you
@@mattbrew11 What type of roof is best to go with solar? Curious. Is it the standing seam? Seems worth the investment if it is more permanent and less chance of leaks.
What are the approximate costs for 2600sqft of this metal on your house? I know labor prices can vary but I'm trying to get an idea if it's even in the ballpark budget wise. Thanks
@@Darksurfr i built my home with a standing seam Galvalum roof and used a railless S-5 system to mount the panels and route the conduit. In my experience that is the finest roof you can get for solar because it will a) outlast the panels b) requires zero penetrations and c) with proper retainment system can withstand cat 5 wind loads
I installed a Decra Shake steel roof on my house, in 1995. It's had 100+ mph winds , 100 degree heat, Hail and Snow. No leaks ,or degradation that I can see. Steel is the only way to go.
I am building material supplier, and I have had several customers who have went the metal roof route who complained about their cellular service after the metal roofing was installed. Have you had any experience with cell service issues from metal roofs?
Of course the metal blocks the signal, and that's 4g, 5g is even worse. It's common that cell signals are reduced so much that a booster has to be installed. A directional antenna outside (looks like a sharks dorsal fin and it is pointed at the closest tower) and a cable that runs down to the base station inside the house that puts out the boosted cell signal. Note the cheap ones are generally crap, it's worth it to buy the mid to higher priced to get faultless service
hope you show how they flash .and the ridge how do they install that so you dont see any fasteners.and do you order the ridge for the pitched roof you have ie;12/12 roof or 4/12 roof??
Would have been nice to see the flashing detail, plus how do you replace a damaged shingle if it's in the middle of the roof? What's it painted with, and what are the specs of the warranty? I've put on many standing seam roofs and these are things to consider.
Couple weeks late, mother just had her roof redone. Tried to convince her to do metal but she wanted the normal shingle look, but she did suggest to the roofer for the Fortified system you discussed on an earlier post.
I hope this works better than the Dekra version we used on our roof, it was a leaky nightmare. The worst part are the vents most are only rated for 10 years. Reason I say was a nightmare first installer didn't do it right so Dekra had another company come out and tear it off within a year, the valleys were leaking. I thought all was well then the vents all started to leak, had I known I was thinking of having vents come through gables maybe so no penetrations? Shortly after we sold the house and on inspection there were two major leaks we had to get fixed and finding a good contractor to fix it wasn't easy. I would not trust just any installer to do it right. Wish there were more contractors around like you who would stand behind their work.
Thanks for another great product review Matt. 2 things … 1. Anyone know if you can install solar over a metal roof like this? Solar sales guy seemed to think not. 2. Has anyone heard of Davinci Slate Composite roofing? It’s another slate look-alike, I thought it was made of rubber but I’m unsure?
I've never seen solar mounting options for metal shingles like this. Better bet would be standing seam (or corrugated). Mounting on asphalt shingles is simple along with most concrete tile. I've been in solar design for 3 years.
Correct me if im wrong but a lifetime warranty is only good if the company is still around to replace it? And what exactly is covered under the lifetime warranty?
@@KLondike5 I own a solar business that among many other states, we service FL and we had multiple standing seam roof with proper retainer systems and solar survive hurricane Ian just fine.
@@KLondike5 Standing seam that is installed on a good substrate holds up much better to wind than other common roofing. Maybe this guy just didnt have the resources to do it.
New subscriber. I love this roof. Hope I can get a discount somehow so I can get one. Asphalt for my house is expensive and I do not like the idea of watching it all fall down my gutter , into the downspout's and then onto the ground, and to mention , watching weeds grow in the gutter's.
I like the fall protection used on the build, simple but safe. I used metal roofing on my house at 140 lbs a square verse 600-900 lbs a square sure for asphalt shingles. You're parking an SUV on top of your house with asphalt shingles.
900lbs a square??! I own a massive solar company and while we sub out roofing ive never heard of any roof weighing that much per square outside some tiles
@@mattbrew11 Yeah, asphalt shingle is 200-300 pounds/square. Tile is 800-1200 pounds/square. Metal is 60-100 pounds/square (peel/stick puts it at ~100). Solar is also around 250 pounds/square. It's right on that a typical asphalt roof is equal to an SUV!
Question that I have is repairing a roof like that after a limb has fallen on the roof or worst case a tree has come through the roof structure and you have to rebuild it. Is it easy to go back and reroof the damaged area.
I own a very large solar company. Do not choose the system if you want panels on top. There’s not a good way to mount without causing a lot of issues. When you say steel sheeting do you mean a ribbed roof with exposed fasteners or what?
@@cmdrdarwin3682 corrugated much lower cost to install but the exposed fasters need maintenance periodically. I chose a standing seam roof for my own home
I wonder what the minimum pitch of the roof can be with this product as duriod shingles has its limits in that regard and metal is much better for low pitched roofs. I replaced our torch on roof with metal and its been great, no problems in 10 years and looks good, lifetime transferable warranty too!
like every performance aspect of this product, warranty huge plus, i have been in a house with similar metal roof heavy rain sounded like one was inside a snare drum, lots of interior noise, is there a sound deadening backer?
Do they have Canadian distributors? How well are they for snowfall and super cold temps. I really like this idea, so every hail storm we get can give a big FU to it. Love that insurance companies are giving breaks when you install this. Asphalt shingles are just waiting to be replaced
love the build and roof sealing. I want to like the product. The fire resistance is a big deal. I am glad that was mentioned, but was it the same as any metal roof, or was the comparison to asphalt shingles? Can you add solar mounts? leaks, special tools or tiles, etc.? How do you handle penetrations? Clearly they do, but it wasn't shown. If they do leak, where do you get the indicators so you can fix it? What is the sound profile like during rain/wind? (I have always wondered if certain metal patterns might have resonance issues). Too many questions? Sorry. Not being a downer. The devils in the details and I REALLY like the look, but have to be comfortable with function versus form.
This product is designed and warranted to work with solar mounts: www.starlingrfs.com/. I suspect you can find details for how to handle penetrations on the product website where they have install manuals.
Great content on metal roof subject. I would like to suggest a subject for video. Solar shingle roof options in new construction. Since there is a lot of interest in netzero homes.
There are exactly zero solar shingles on the market that I would have wanted any of our 55,000 solar customers to utilize. Standing seam coupled with S-5 mounting remains and likely will remain the best possible option to use solar for quite some time. Its what I used on my own home designed from the ground up to be uber durable, ultra high performance and an heirloom to be passed down through my family. Budget was of no concern. I don’t drive nice cars but I live in a Bently, if they made tanks that don’t care if its - 60* or 140* outside. Reasons: incredibly easy to repair, much better cooling, easily outlives the panels and not an electronics recycling nightmare. Also doesn’t count a particular inverter setup.
Hey Matt - This is a really interesting product. We're coming due for a roof replacement and while I've wanted to do a standing seam roof, my wife isn't crazy about the look. This could be a great compromise. I've watched some of your other steel roof videos and if I recall correctly, you usually like to put an air gap between the decking and the roofing material, but I don't see that here. Presumably because of how these panels are attached to the deck? Do you think the lack of an air gap would cause any issues in the Chicago area with a conditioned attic? Closed cell -> ZIP R -> (additional rigid foam?) -> Peel & Stick -> Steel
You really should have covered the edge details better. What about the edge where it’s cut or where you get to the ridge? How do you compensate for pattern shift at the top, bottom or side? This video was extremely short on details. By the way the proper term is “installation” not “install”. You should know this.
@@HavNCDy lonetree colorado, old castle concert tile roof. Everything has gotten expensive here in the last 5 years. No idea who the sub who installed, builder torched documents at hold requirements date.
We did a more typical deck mounting with no additional ventilation on this home. Stay tuned for a future video showing ventilation option for shingles. I do like a vented install.
I love those metal shingles. Put them on my brothers house. The only downfall is that there is no way to install solar panel on them. There are a myriad of mounts for traditional metal roofs, but no approved mounts for textured shingles.
Matt states that this roof will have a Class A fire rating. As I understand this system, it will only have that rating if you use a 1 hour rated underlayment. I am trying to figure out that underlayment that gives the A rating and does not "break the Bank".
If an existing house has 1/2" wafer board decking, will this metal roof nail to it sufficiently to keep the metal roofing from coming off in sever wind storms?
I reached out to edco in 2018 after I saw them featured on your video and they had no dealers or installers in my state (Maryland). I reached out again in 2020 and they had a Mid-Atlantic business development manager but I still couldn't find any dealers or installers in Maryland. Sounds like a great product but it's not helpful if I can't get a quote to compare to other products and installers in my area.
I’d suggest asking a local roofer to source and install. It’s pretty straightforward to train a shingle crew to do this install. It’s easy to source too. Hope this helps. Best, Matt
I’ve got a question with regard to tankless water heaters that you have made videos about prior. My house in Gulfport Mississippi is 1000 SF with a very old standard tank-type water heater. It would free up some space if I could replace with an outside tankless. I watched one video that stated that one can’t be installed under a roof. Well, I have 2’ eves on the side where I would want to install. Is there such a restriction in Texas where you are?
Does anyone know how to get in touch with this roofing crew? I live in Austin and would love to get a quote from this roofing crew for an Edco install. My roof got damaged with hail and am ready to reroof and would love to go with this option but am having trouble finding companies that have experience with this material. ThAnKs 🙏
The problem with metal roofs as a replacement product is the cost. You can put on 3-4 asphalt shingle roofs for the cost of one of these. If it’s a new build, sure it can make sense if this is your forever home. If not, I don’t think you’ll recapture that higher cost in the sales price. I do like this product’s look vs standing seam because standing seem can show defects and high and low spots on the roof deck. I was quoted nearly twice the cost of a high quality asphalt shingle roof for 26g metal. I just didn’t see the value in a metal roof so thin.
I guess something to think about is resale value and inflation. The house’s resale value only goes up with metal since it’s never going to need replacing. And who’s to say a 8k asphalt roofing job is going to be 8k by the time it needs replacing? Just stuff to think about I guess.
Matt, if I'm definitely replacing my roof (in the northeast), but intend to install solar panels thereafter, what roofing product would you use? Thanks!
The house I grew up in had metal shingles and it was 'bullet proof'. The house was torn down in 2017 and was 100 years old with the original roof. After my grandparents died and my uncles and aunts sold the place the new owners didn't have annual termite control done... All it took was a decade of that and the house was damaged so much it was uneconomical to repair due to the termites being in the entire floor and every wall (East Texas Huntsville area where the termites are Texans too, bigger and bader, haha)
Truly informative! I needed a reference that highlighted basic wood frame construction methods & techniques where ruclips.net/user/postUgkxYGamVaHfdHiPlAQaLa7zkwR02OKpGYDU were best. I am pleased with the depth and clarity of Ryan’s Shed Plans. It was really convenient to capture!
Although Matt would never say it, hats off to him for helping his employee build this house with his resources.
@First Last Matt mentions who it is in other videos.
@First Last This is a home for one of Matt's long time Project Managers. He's thrilled to help Luke build this home for his family.
Looks great! We put a metal
Shingle roof product on our Straw Bale house in Florida 25 years ago. It still looks great. Zero issues despite 5-6 Hurricanes.
thats serious.. im sold
Love the Build Show. As an HVAC contractor/trainer innovative ideas get me excited. It doesn't have to be HVAC, building in general and next level thinking is something that keeps my mind wanting to create a better wheel.
I put these exact same Edco shingles on my house 10 years ago. They look like the day they were installed. Great product. I have no affiliation with the company. Looks like slate from the ground. The only downside is to make sure you put snow stops on as, like many metal roofs, snow will avalanche.
Thank you for informing everyone on your channel of newer easier ways to home build prep
I am a fan of metal roofing. It's easy to install, looks great, and may last the lifetime of the house. The only drawback I have encountered was trying to find matching replacement panels to repair a small section of roofing that suffered damage from a fallen tree. The particular shake pattern was discontinued by the manufacturer a few years after we installed it. I searched all accross the nation to find something compatible without success. I ended up replacing the entire roof with galvalume standing seam as I was assured the profile and color would always be available.
Good point. I guess buying a textured metal roof is like buying that unique Italian ceramic tile for your kitchen or bathroom. Buy extra in case of later damage.
It’s great! My shed has been completed and it turned out nice looking and sturdy and it is way better than the sheds that many of my neighbors had put up. Of course, I'm pleased with the outcome and this Ryan’s ruclips.net/user/postUgkxGZedDTcDfgD7fG_uU4esfx_EgxzlY2_1 Plans was extremely useful to me as a guide.
This is exactly the kind of product I have been looking for. I love standing seam but it doesn’t always look right on some buildings. This is a great option for a traditional look.
I lived in a house that was built in 1980, it had a metal roof that looked like tiles, but the advantage was the sheets came in 6 metre lengths, the house was rated for 220kph winds, as we lived in a Cyclone Area.
It was $33,000 in materials to do my house. I paid $4,000 for shingles. I can replace my roof every 15 years for the next 120 years before I hit the metals cost. At 120 years the metal will most likely need replaced. I just couldn’t.
How much was labor to install? That will cut into those replacement roof cost pretty fast.
@@lukemarks9132 sweat equity I believe
You don’t get the resale value tho
@@lukemarks9132 I don’t even want to know!! Another product installed by a local company was $36,000.
@@cybertrk for which? I’m not worried on a house I built and I’ll die in but it can’t change much. All houses are 500% over valued right now so I don’t think it matters for a few grand.
I love a good metal roof, I don’t do Mutch roofing anymore, but 25 years ago I used to install Girard, Decra. Granulated steel tile. It was an awesome roof if it was installed right. unfortunately, I have repaired many granulated steel tile roofs. Failure always came in when a installer just don’t care.
I like this style of roof because you lay your 1” x 4” vertically then 2” x 2” horizontally, and then you can insulate in between the bats. Something you should appreciate insulated roof. It really helped break that thermal transfer. When we started, we use smooth shank nails, and we found that they would back out through time. Then we went to ring shank nails. Made it harder to repair them, but really tied everything together. I find myself doing repairs on them occasionally because there isn’t a lot of steel tile installers out there.
Love the look my question is how adaptive is this style to solar panel mounting?
Great question, I was going to ask that myself.
It's not, and solar won't be around anyway unless the government ups the subsidies.
I'm going to guess the answer is going to be, "Not very". You couldn't very well anchor mounting rails through the roofing without crushing it, and if you were to cut slots in the shingles so tabs for the rails could poke through you'd lose almost all of your weather protection.
We have metal shingles on our roof and we asked for a quote for solar panels this summer and the installer refused because of this kind of roof. He cannot guarantee the roof won't leak and void the warranty.
@@GervaisRioux that's sad
How is repair? Would love for repairs to be discussed during videos so we have the full info, thank you very much for your videos and the work you put in for us mat, amazing work!
Great question but with it you need to answer why it would require repair? Asphalt is more likely to require repair given similar circumstance. But I suspect a repair is going to rely on sealants for this roof, like butyl.
No repairs needed
only in a perfect world are repairs not needed.... i am not saying it wont stand the test of time and nature but in other circumstances like an addition of a plumbing vent in the future?
Im doing this on my custom build! we wanted metal roof but love this look!
What is the cost compared to a standard metal roof?
We just had this roof installed in the spring, over 2,600 sq ft went up in a day and it's been great. The neighbors are all commenting about how good it looks and we are planning a solar installation hopefully before the end of the year. This is the last roof I will ever put on a house thankfully.
How are you installing solar over this? Matt has recommended standing seam roofs in the past because of the clamp on solar panel standoffs.
I would definitely NOT recommend using this type of metal roofing for solar. Source: I own a solar company that just crested 55,000 installs. I wouldn’t consider anything but a ground mount were I you
@@mattbrew11 What type of roof is best to go with solar? Curious. Is it the standing seam? Seems worth the investment if it is more permanent and less chance of leaks.
What are the approximate costs for 2600sqft of this metal on your house? I know labor prices can vary but I'm trying to get an idea if it's even in the ballpark budget wise. Thanks
@@Darksurfr i built my home with a standing seam Galvalum roof and used a railless S-5 system to mount the panels and route the conduit. In my experience that is the finest roof you can get for solar because it will a) outlast the panels b) requires zero penetrations and c) with proper retainment system can withstand cat 5 wind loads
I installed a Decra Shake steel roof on my house, in 1995. It's had 100+ mph winds , 100 degree heat, Hail and Snow. No leaks ,or degradation that I can see. Steel is the only way to go.
I am building material supplier, and I have had several customers who have went the metal roof route who complained about their cellular service after the metal roofing was installed. Have you had any experience with cell service issues from metal roofs?
That's interesting since most modern phones will use wifi calling if they're connected to a local Internet connection.
I have a Decra Shake steel roof. Yes, you may see a drop in cell phone signal. But there are cell phone signal repeaters available if needed.
Of course the metal blocks the signal, and that's 4g, 5g is even worse.
It's common that cell signals are reduced so much that a booster has to be installed. A directional antenna outside (looks like a sharks dorsal fin and it is pointed at the closest tower) and a cable that runs down to the base station inside the house that puts out the boosted cell signal.
Note the cheap ones are generally crap, it's worth it to buy the mid to higher priced to get faultless service
Turn on wifi calling for when inside. And also, blocking cell service and other invisible radiation is more a feature than a negative
@@gial8862 do you think a 4g/5g repeater is equally bad?
hope you show how they flash .and the ridge how do they install that so you dont see any fasteners.and do you order the ridge for the pitched roof you have ie;12/12 roof or 4/12 roof??
Would have been nice to see the flashing detail, plus how do you replace a damaged shingle if it's in the middle of the roof? What's it painted with, and what are the specs of the warranty? I've put on many standing seam roofs and these are things to consider.
Go to the website
It's not asphalt so no repairs needed
Couple weeks late, mother just had her roof redone. Tried to convince her to do metal but she wanted the normal shingle look, but she did suggest to the roofer for the Fortified system you discussed on an earlier post.
Great Video Can you give more detail on how the roof itself is constructed did you vapor vent it? why is there no rain screen? how is it insulated?
Matt you always strive for the best construction outcome.
Great product, definitely going this route when I build my house. Thanks Matt.
Great video. Would have loved to see some flashing detail close up on this product
I saw these about a year ago on the metal roof channel and I love the style ❤❤❤
Hey Matt, take a look at Euroshield rubber roofing. I did it on my roof, and looks amazing.
Cool to see a new alternative.
I hope this works better than the Dekra version we used on our roof, it was a leaky nightmare. The worst part are the vents most are only rated for 10 years. Reason I say was a nightmare first installer didn't do it right so Dekra had another company come out and tear it off within a year, the valleys were leaking. I thought all was well then the vents all started to leak, had I known I was thinking of having vents come through gables maybe so no penetrations? Shortly after we sold the house and on inspection there were two major leaks we had to get fixed and finding a good contractor to fix it wasn't easy. I would not trust just any installer to do it right. Wish there were more contractors around like you who would stand behind their work.
Well said. Thumbs up. And great backyard storage
Can you put this on as siding as well?
Thanks for another great product review Matt. 2 things …
1. Anyone know if you can install solar over a metal roof like this? Solar sales guy seemed to think not.
2. Has anyone heard of Davinci Slate Composite roofing? It’s another slate look-alike, I thought it was made of rubber but I’m unsure?
I've never seen solar mounting options for metal shingles like this. Better bet would be standing seam (or corrugated). Mounting on asphalt shingles is simple along with most concrete tile. I've been in solar design for 3 years.
Correct me if im wrong but a lifetime warranty is only good if the company is still around to replace it? And what exactly is covered under the lifetime warranty?
I put one of these roofs on my house and it's looks great.
Love the look. I was quoted at $540 per square for material only. Standing seam metal with labor included was significantly less.
That’s $5.40 per square foot?
@@robertatkins272 Correct. A square is 100 square feet.
@@KLondike5 I own a solar business that among many other states, we service FL and we had multiple standing seam roof with proper retainer systems and solar survive hurricane Ian just fine.
@@KLondike5 Standing seam that is installed on a good substrate holds up much better to wind than other common roofing. Maybe this guy just didnt have the resources to do it.
Thanks for this info, in my area thats actually about the same cost as standing seam... well 9 mo ago, who knows now.
Curious how to handle roof penetrations with this?
New subscriber. I love this roof. Hope I can get a discount somehow so I can get one. Asphalt for my house is expensive and I do not like the idea of watching it all fall down my gutter , into the downspout's and then onto the ground, and to mention , watching weeds grow in the gutter's.
I like the fall protection used on the build, simple but safe. I used metal roofing on my house at 140 lbs a square verse 600-900 lbs a square sure for asphalt shingles. You're parking an SUV on top of your house with asphalt shingles.
Most asphalt shingles are 225 to 250 per square. Most metal is 100 pounds per square. High end shingles are maybe 400.
The fall protection is not being used in the right way.
900lbs a square??! I own a massive solar company and while we sub out roofing ive never heard of any roof weighing that much per square outside some tiles
@@mattbrew11 Yeah, asphalt shingle is 200-300 pounds/square. Tile is 800-1200 pounds/square. Metal is 60-100 pounds/square (peel/stick puts it at ~100). Solar is also around 250 pounds/square. It's right on that a typical asphalt roof is equal to an SUV!
Roofs are designed to handle the load
Question that I have is repairing a roof like that after a limb has fallen on the roof or worst case a tree has come through the roof structure and you have to rebuild it. Is it easy to go back and reroof the damaged area.
They seem to bypass addressing this question.
These look great. How do they compare to aluminum shingles?
Although my neighborhood does not allow metal roofd, I think that this would pass because of the looks. If I was building again, I would use this!
Most HOAs will make an exception for this type of metal roofing.
Great roof! That's what I'm going with. Thanks!
How do these steel shingles compare in price to traditional steel sheet roofing & are they solar panel compatible?
I own a very large solar company. Do not choose the system if you want panels on top. There’s not a good way to mount without causing a lot of issues. When you say steel sheeting do you mean a ribbed roof with exposed fasteners or what?
@@mattbrew11 - Yes, I guess another way to say it, would be corrugated sheets.
@@cmdrdarwin3682 corrugated much lower cost to install but the exposed fasters need maintenance periodically. I chose a standing seam roof for my own home
I wonder what the minimum pitch of the roof can be with this product as duriod shingles has its limits in that regard and metal is much better for low pitched roofs. I replaced our torch on roof with metal and its been great, no problems in 10 years and looks good, lifetime transferable warranty too!
Would you use 1x4's to create a ventilation area under the shingles, just like on standing seam?
like every performance aspect of this product, warranty huge plus, i have been in a house with similar metal roof heavy rain sounded like one was inside a snare drum, lots of interior noise, is there a sound deadening backer?
Do they have Canadian distributors? How well are they for snowfall and super cold temps. I really like this idea, so every hail storm we get can give a big FU to it. Love that insurance companies are giving breaks when you install this. Asphalt shingles are just waiting to be replaced
Check out Diamond Roof just west of Toronto. They have a similar product with years of experience in cold climate. Tell them the r&d lab sent you.
EDCO should make the part that looks like the Slate a solar voltaic unit.
love the build and roof sealing. I want to like the product.
The fire resistance is a big deal. I am glad that was mentioned, but was it the same as any metal roof, or was the comparison to asphalt shingles?
Can you add solar mounts? leaks, special tools or tiles, etc.?
How do you handle penetrations? Clearly they do, but it wasn't shown. If they do leak, where do you get the indicators so you can fix it?
What is the sound profile like during rain/wind? (I have always wondered if certain metal patterns might have resonance issues).
Too many questions? Sorry. Not being a downer. The devils in the details and I REALLY like the look, but have to be comfortable with function versus form.
This product is designed and warranted to work with solar mounts: www.starlingrfs.com/. I suspect you can find details for how to handle penetrations on the product website where they have install manuals.
Will this work in the northeast with our weather and snow??
I’ve put a couple of these on. There a great product
Would this would for shingle siding?
Very nice looking.
How does it compare to a 24 gauge, standing seam meal roof for commercial application in price and longevity for central Florida?
Great content on metal roof subject. I would like to suggest a subject for video. Solar shingle roof options in new construction. Since there is a lot of interest in netzero homes.
There are exactly zero solar shingles on the market that I would have wanted any of our 55,000 solar customers to utilize.
Standing seam coupled with S-5 mounting remains and likely will remain the best possible option to use solar for quite some time. Its what I used on my own home designed from the ground up to be uber durable, ultra high performance and an heirloom to be passed down through my family. Budget was of no concern. I don’t drive nice cars but I live in a Bently, if they made tanks that don’t care if its - 60* or 140* outside.
Reasons: incredibly easy to repair, much better cooling, easily outlives the panels and not an electronics recycling nightmare. Also doesn’t count a particular inverter setup.
Hey Matt great Edco video, I have a question about venting the roof ,how was that done .thanks in advance
You don't--maybe. The attic spaces that Matt does are part of the conditioned/controlled air space.
If you do need to vent Edco roofing it can be done - they offer an under-the-ridge vent option that looks great and allows for good airflow.
thanks Great content and great delivery
Hey Matt - This is a really interesting product. We're coming due for a roof replacement and while I've wanted to do a standing seam roof, my wife isn't crazy about the look. This could be a great compromise.
I've watched some of your other steel roof videos and if I recall correctly, you usually like to put an air gap between the decking and the roofing material, but I don't see that here. Presumably because of how these panels are attached to the deck? Do you think the lack of an air gap would cause any issues in the Chicago area with a conditioned attic? Closed cell -> ZIP R -> (additional rigid foam?) -> Peel & Stick -> Steel
You’ll have to pay Matt to get an official response.
@@damianokon6209good grief
Hey Matt, what about under heavy rain or ice pellets would it be noisy on the inside of the house?
You really should have covered the edge details better. What about the edge where it’s cut or where you get to the ridge? How do you compensate for pattern shift at the top, bottom or side? This video was extremely short on details. By the way the proper term is “installation” not “install”. You should know this.
Wonder if these would let you replace an HOA "required" slate/concrete tile roof. My roof needs 2-3 replacement tiles yearly and is 100k + to replace
Wow. I always thought real slate roofs were more durable. Just wondering which climate zone you’re in?
@@HavNCDy lonetree colorado, old castle concert tile roof. Everything has gotten expensive here in the last 5 years. No idea who the sub who installed, builder torched documents at hold requirements date.
@@brandonv8721 thank you for answering.
@@HavNCDy been told they last almost forever if properly installed.....also told they are rarely installed correctly by builders subs here.
@@brandonv8721 I’ve heard “if installed correctly” comment a lot too in reference to a lot of building materials.
What happened to you have them run 1xs on a 45° angle for ventilation?
We did a more typical deck mounting with no additional ventilation on this home. Stay tuned for a future video showing ventilation option for shingles. I do like a vented install.
I love those metal shingles. Put them on my brothers house. The only downfall is that there is no way to install solar panel on them. There are a myriad of mounts for traditional metal roofs, but no approved mounts for textured shingles.
Matt states that this roof will have a Class A fire rating. As I understand this system, it will only have that rating if you use a 1 hour rated underlayment. I am trying to figure out that underlayment that gives the A rating and does not "break the Bank".
If an existing house has 1/2" wafer board decking, will this metal roof nail to it sufficiently to keep the metal roofing from coming off in sever wind storms?
Super cool for me here in Boston... Will check that out to replace my 100 yo slate
Replaced the original roof on a 1915 house because no one would touch the original tin shingles when a valley flash started leaking.
Matt, I want to put a copper roof on a gazebo by myself. It’s six sided and not very large. Only 9 feet in diameter. Can you suggest a system?
We used plastic slate and it came out great and our cell phones work!
Try walking on that plastic roof in about 10-15 years. I feel the UV exposure would make it brittle and breakable with the slightest pressure.
Curious what they do to sound deaden the roof, for when there is Hail or Heavy Rain. I could hear the tin sound as Matt was sliding them together.
Probably extra insulation or sound proof dry wall options.
You will hear nothing in the house
Noise transmission and expansion, contraction due to heat and cold…are these factors, which need to be considered with this system?
Got my father interested for the 1910 Winnituxit property
Hey Matt, how do you flash around around a chimeny?
Can you walk on it without denting or warping as you walk?
It would be nice to know the price you would be looking at for this SQ footage.
How do you protect the cut edges? Won't the steel rust after cutting?
Can you show how it will look if you staggered the metal roofing?
Do these steel roof panels hold their color over time? The underlying steel sounds great but how is the color added?
Does anyone make plastic shingles using material like Aztec? Would seem to be another great durable option to asphalt
I reached out to edco in 2018 after I saw them featured on your video and they had no dealers or installers in my state (Maryland). I reached out again in 2020 and they had a Mid-Atlantic business development manager but I still couldn't find any dealers or installers in Maryland. Sounds like a great product but it's not helpful if I can't get a quote to compare to other products and installers in my area.
I’d suggest asking a local roofer to source and install. It’s pretty straightforward to train a shingle crew to do this install. It’s easy to source too. Hope this helps. Best, Matt
The issue I have is when the hail storm hits it, and it gets dented: How do you replace a panel in the middle of the field?
By pulling several rows down in most cases.
I’ve got a question with regard to tankless water heaters that you have made videos about prior. My house in Gulfport Mississippi is 1000 SF with a very old standard tank-type water heater. It would free up some space if I could replace with an outside tankless. I watched one video that stated that one can’t be installed under a roof. Well, I have 2’ eves on the side where I would want to install. Is there such a restriction in Texas where you are?
Any grounding for lightning strikes needed?
Strongly advise grounding anything that can get hit by lightning
What is that part of the house that has the shape of a chimney but covered with zip sheathing?
Would like to see how you flash the walls with this product
So question for you? What about the breech created by nailing into the roof while nailing down the metal?
It’s the same as shingle roofs
How much more is those metal shingles versus designer shingles
That roof looks amazing, but how would you put solar panels on it and not void the warranty?
Where should I get the supplies? I can't find metal roofing that is being sold directly.
Does anyone know how to get in touch with this roofing crew? I live in Austin and would love to get a quote from this roofing crew for an Edco install. My roof got damaged with hail and am ready to reroof and would love to go with this option but am having trouble finding companies that have experience with this material. ThAnKs 🙏
The problem with metal roofs as a replacement product is the cost.
You can put on 3-4 asphalt shingle roofs for the cost of one of these.
If it’s a new build, sure it can make sense if this is your forever home.
If not, I don’t think you’ll recapture that higher cost in the sales price.
I do like this product’s look vs standing seam because standing seem can show defects and high and low spots on the roof deck.
I was quoted nearly twice the cost of a high quality asphalt shingle roof for 26g metal.
I just didn’t see the value in a metal roof so thin.
I guess something to think about is resale value and inflation. The house’s resale value only goes up with metal since it’s never going to need replacing. And who’s to say a 8k asphalt roofing job is going to be 8k by the time it needs replacing? Just stuff to think about I guess.
how do you deal with cut ends etc ? = steel rusts.
Matt, do you have folks that work for you that do this kind of install in Harlingen, Texas?
How would a solar array be installed on a metal roof like this?
Matt I want to order the materials from EDCO for my home. What's the simplest way from start to finish how to order them?
What is the system for valleys? Looks like a nice product.
@Matt Risinger, can you do a video on F-Wave shingles?
It looks very nice. How does the total installation cost compare to traditional metal roofing?
What about the delay when the fire dept cant chop through the roof to put out a fire?
Matt, if I'm definitely replacing my roof (in the northeast), but intend to install solar panels thereafter, what roofing product would you use?
Thanks!