UPDATE: So I’m running a 3-part LIVE workshop that takes us on… A Time Travel Through Vintage Electronics. We’ll rewind the clock, dive into the tech of the times… (and study the very history of how things were broken and repaired has evolved) The workshop is coming soon, but if you're reading this then you're in luck (or not)... And there's still time for you to sign up using the link below: www.menditmark.com/mend-mark-workshop The workshop dates are mentioned in the link above too.
And those youtubers recapping Amiga 1200s think they are experts; well done, you replaced a belt on a walkman - this man is a true expert! Watching this inspired me to fix a memory module I had, and I made a complete mess of it. :(
This was a master class on super detailed down to the bone electronics repair and troubleshooting. I am not a person that gives up easliy. But this cassette deck would've kicked My butt. Made me want to throw away My soldering and work station.
I’ve never seen anyone work to this level of detail. Mark really is the best engineer I think I’ve ever seen at work. Be honest - who else would’ve swept this all into the bin hours ago? 😂😂
Not me. It would have stayed on the bench until it worked. You have to be patient with 40 year old cassette decks and the customer has to be willing to pay, which is always the problem. All you ever hear is 'I'm sure it's something simple'
I actually know a couple of very capable and experienced electrical engineers and both of them said that they would have recycled this for parts many hours ago - and both are awed and amazed at Mark's level of detail and expertise in Getting. It. Done. 😲
My wife and I absolutely love watching Mark. She has no interest at all in electronics or soldering but sits there completely captivated. Brilliant. Looking forward to part 3.
That's the mark of the truly great channels: keeping your interest, no matter what the subject. I sat through half an hour of a factory tour of frisbee golf disc manufacture (yes - really) just because it was presented so well by enthusiastic people.
@@HansDelbruck53 I know what youy mean. I have about 8 square meters for my little mancave. I make do by making optimum use, but I really need three times the space.
Eight square meters 😂 you can dance while working, I have a workplace in a space of 0.8 x 2 meters in the corner of our bedroom (the photos are on EEV, the last modification of the workplace is on page 194 and I think it starts on page 139 my nick Edison) before that I had a workplace built into wardrobes. When you want space, you can always find it 😁 Nice day 🙂Tom
Of course Mark's skills are superlative, but credits to Aiwa for such a great service manual. Today, not even in high end electronics you will find such literature!
I have spent over 50 years doing consumer electronic repairs and your soldering iron remains by your side, but more often than not todays gear requires a rework hot air station. Mark is a master of his craft.
I saw many technicians in the 90s, But I've never saw this low level of repair, Rewiring motors, Rebuilding plastic knobs... In the air force it's called "Level D Work". A Level - Airplane level repair, B - Garage, D Level - Lab. Not many people reach level D.
I worked for the MOD as a civilian and you were only allowed to use the official spares not design amd make your own. Mark is very dedicated to his work and tries everthing he can to repair anything to full working order. This is fine if it is a hobby, but you can't make a living doing these depths of repairs.@@sharonleibel
Probably this service should cost to the owner the same as an out of the box Nakamichi Dragon, but with silver face plate hahahaha! It's priceless!! Amazing analysis and repair job Mark!! Thanks for sharing!!
I am gobsmacked about the care and ability that is portrayed on this channel. Of all the other channels of this stripe, I have never seen anything to match it. I probably would be horrified if I knew how much it cost to do the repairs; I particularly have a thought about my laser player that won’t spin up back from the 90s whose caps are probably ancient history. But I understand and truly enjoy watching the craftsmanship. Bravo. They don’t make craftspeople like you much anymore.
One day I did a similar repair of Texas Instruments Calculator. Someone stilled gasoline on it. Its PCB and LED panel got damaged after. So I carefully soldered out all components, and then made a new PCB with a similar technique as in the video. I had to buy a new LED panel though. The calculator worked again as new after I soldered back all components. This video is a very nostalgic for me.
I haven't watched the new episode yet but wanted to comment how happy I am to see a new episode posted today. Cheers everyone watching or about to watch and to Mark for the hard work he puts into the videos for us.
I almost didn't bother watching this one because I'm not a fan of cassette tape decks and don't think they are worth mending but I'm glad I did ! I came to the conclusion that it's not the equipment that I enjoy, it's the troubleshooting and diagnostics that keep my interest !
This is how it's supposed to be. None of this, 'something's gone wrong with it so chuck it out and replace the whole thing', malarkey, here. Diagnosis of the fault and repair/replacement of individual components to make things work again, is the order of the day. Something that requires skill, knowledge oh, and the right equipment.
Mark, your pcb manufacturing technique is nearly identical to mine. When I was 18 (I am 52 now) I made my own UV box for exposing photo positive pcbs, and I still have it, and I still use it 😁. And I also use double layer transparencies, laser printed. Back in the late 80s I had transfer sheets with through hole pads and traces and actually made them by hand until I got a second hand laser printer for 25 guilders in 1992 (About 5 1992 pounds) ,an HP laserjet II (300 dpi). Late 90s I got a 1200 dpi laser printer which gave the designs razor sharp traces. I also mucked about with a roland plotter but it was cumbersome and slow. It's now disassembled waiting for a laser head for directly exposing photosensitive pcbs, in a bitmapped scanning configuration (no vectors). Will be driven by a pi pico's PIO state machines. God I love reminiscing those days.
Awesome! I have 10% of your skillset in diagnosing issues like this - I would have given up probably after the motor PCB rebuild! Now you have me hooked on waiting for part 3...
This video is just perfect, the direction, the framing, the telling, the repair... I can only learn from a channel like this! Thank you for these great videos.
All 40 year old cassette decks are. LOL. They are the most time consuming repairs by far and you have to be sure the customer will pay for the time. Most machines had a service life of less than 5 years so it's amazing any of them are still working at all.
It's like watching a combination of a brain surgen and an artist , your skill set is honestly next level, on another video a toggle switch was missing, no bother I'll just get on the lave and make one, and it was better than the originals , great work Mark
Your channel is addictive. I’m constantly checking it for updates. This (at least) three parts series is top notch. Considering how much time you’re spending on this project, this tape deck must be invaluable. Keep up the good work!
Mark... I have Watched many many many Electronic Repair Videos on RUclips and I can Truly Say this is the Best!!! No One uses Heat or Cold anymore. Who would Rewind a Motor today? Let alone make a PCB? When was the last time you saw a Slolder Sucker!? A Must See for all Technicians starting out!
Right up my street this; the diagnosis, fault tracing, playing the scope like an expert musician, using common sense for substituting unavailable components & just the awesome hand skills and inventiveness. I am in awe. These videos are simply compulsive viewing & so watchable for any tech out there and the rectification skills are matched by the superb multi-camera editing skills. It must take hours & hours to put these together & I hope I speak for everyone by saying a big thank you for entertaining us all with your superb videos. Well done Mark.
I like the way Mark is more than happy to share the things that don't work out. That's real world fault-finding - showing the entire process. And everything gets fixed in the end - the only variable is time. But I'm not sure I would have the time and patience to design and build my own motor controller to run the motor I re-wound myself. I dofff my cap to you Mark. Top man!
I personally am completely baffled by all of Mark’s techy talk which I don’t understand and have no interest at all in electronics but his skill engineering and know how just keeps you glued to your screen. Well done Mark you should be on mainstream TV.
Je n'ai jamais vu autant d’énergie et de moyens développés pour la réparation d'un appareil de ce type... Bravo !! I have never seen so much energy and resources developed for the repair of a device of this type... Well done !!
G,day Mark from Sydney Australia. I can't believe how complicated a 1980s tape deck is. I guess pre- MOSFET * Really like your crocodile clips for bench multi meter uF testing. * Manufacturing the PCB and scavenging the components for the DC motor was "jaw dropping" * Dolby noise reduction, such an 80s feature. * Those caps at power supply, didn't show any deformation (swollen tops) * I Wonder if you could purchase a new DC motor for that model, instead of internal PCB power modulator? Thanks for filming your work. 🌏🇦🇺
For many years in bands and professionaly in AV production we used cassette as our universal playback & working medium. Cassette was simply everywhere, until a flirtation with Mini Disk for some of us & R-DAT for AV & Video production. I still own a Denon Dolby-C deck now. Cassette had some limitations, but it was so convenient as a near universal medium. It's a pity that internally these decks are often complex & a bit fragile. It's a blessing that someone (Indeed anyone anywhere) might be able to keep these decks alive. Even if it's only to transcribe our work over to a digital file format. What an amazing man.
Your perseverance is amazing. I definitely learned to be patient and follow the flaws step by step. I'm looking forward to part 3. Thanks for the lesson. Subscribed
I’ve never seen this man loose heart. Even after making some pretty humiliating blunders (for Mark anyways), he is immovably cool, calm, and collected. He Should’ve been an astronaut for how professional he is!!
Mark you continue to amaze me! Nothing seems to quell your can-do or can-fix. Such a level head! Today's electronics weren't exactly made to be repaired. Those engineers obviously never met you!
Mark, I just discovered your channel and love your videos! I have an Aiwa F770 that has been apart in a box for over a year waiting for me to finish repairing it. It's almost as complicated as yours and is a pain to work on. I had already gone through some of the same mechanical issues as yours had. My motor was messed up too. These videos inspired me to get it back out to finish troubleshooting a record problem. I just found and fixed the cause of that problem. The SFR501 and 502 were both open circuit. The style pots they used have mechanical connections for where the leads connect to the carbon traces, and they are flaking out with age. I hope no more problems show up as I button things up LOL
Great work on something way more complicated than it should be! The history on those AIWA systems is an electrical nightmare. On the up side, they did sound nice while they worked.
Hi Mark 😲 WoW absolutely amazing diagnostics and repairs 👍, on the one hand I'm a former service technician (today it's just my hobby, which I returned to six years after my workshop was completely robbed), but above all a huge fan of the AIWA brand. Fortunately, I never had such big problems, with my AD M700 tape deck, I changed the motor after 9 years of use (fortunately, I got a new original), I changed the heads and the pressure roller. After thirteen years of operation, I replaced it with the AD F910 model, where after about ten years of operation I changed all the belts - I still have the whole assembly today and it works absolutely perfectly - newer machines have long since given up. I admire your care and thoroughness, there are not many such thorough technicians (I am also very careful and I value such precise work all the more). Your enthusiasm and humor is contagious, I always look forward to every new video and I'm so glad I discovered your YT Nice day 🙂 Tom
@@tremayne3 Congratulations it's an absolutely amazing machine. In 1991, I was working on a sound program for our agency and I needed to record some sounds and noises from the archive of the Czech Television. I was very surprised when I found a rack with thirteen AIWA M700 tape decks in a recording studio next to top professional studio tape recorders. Nice day 🙂 Tom
@@AnthonyToth-t5v Great machine, originally I wanted to replace my M700 with a 9000 but it cost like three 910's and I didn't have that much money. The XK-S9000 model has such a peculiarity (the 7000 model also had it), the mains transformers are mounted on the outside of the rear panel in metal boxes. Nice day 🙂 Tom
I remember auditioning one of these decks back when they were new. I was mightily impressed with its performance. The only thing that held me back from purchasing one was the price! Insanely expensive, but this video explains why its cost was so high. Mark, your diagnostic skills are second to none, your quality of repair, camera work and editing make your videos a pleasure to watch. Thanks for posting such superb content. Catch you on the next one!
Couple things, 1. love the SITEREP at the beginning. 2. hope whoever you repaired this for enjoys their tapes for many years to come, even though it seems like a lot of work for an aged media. 3. Love the content I don't do much electronic repair, but your knowledge and recording of your work will prove priceless to the future of mankind. Ever come to Cleveland OH USA look me up, happily buy you a beer or a pint :) Also congrats on 68K subscribers. Hope it gives a good feeling inside that your content and hard work affected so many.
Mark amazing , you need an honour you are the king of dedication creativity and perseverance, absoloutley brilliant . Looking forward to the next video !
I absolutely loved this having worked for Dolby Labs for 17 years! My wife worked there as well. She organised Dolby licensing. Things like organising the World Cup being in Dolby Surround on the telly :) Fun times.
I would recommend that you expand certain rails on the PCB to provide a flood fill. This will help heat dissipation but the main effect will mean less copper to etch which will mean your ferric chloride will go further.
Those wires were tied into elaborate forms, the machine is after some inexpert intervention and it's even harder to find a fault - you don't know what was inexpertly affected Nice day 🙂 Tom
Mark. Wish you wouldn’t put new vids up ……..my life goes to a stop till I see the end ….,I’m not an electronic engineer. Far from it ….but got hooked on marks vids …..like watching. A detective solving a crime ….addictive 10/10. Till the next one. Thanks mark 👌
I have this same Tape Deck, same problems and squeals with a shifty pitch motor. After watching your video, I may not take on the effort. If I do, I will be listening in again. Thank you so much!
One of the depressing things about watching Mark work is that you just know the repair techs in 90 percent of the places most of us live would *NEVER* apply this level of expertise and time/work/diagnosis to some old tape deck we brought in. Technicians like this and 12voltvids guy are a heartbreakingly small percentage of what you can find out there.
UPDATE:
So I’m running a 3-part LIVE workshop that takes us on…
A Time Travel Through Vintage Electronics.
We’ll rewind the clock, dive into the tech of the times…
(and study the very history of how things were broken and repaired has evolved)
The workshop is coming soon, but if you're reading this then you're in luck (or not)...
And there's still time for you to sign up using the link below:
www.menditmark.com/mend-mark-workshop
The workshop dates are mentioned in the link above too.
Masterful diagnosis, fabrication, repair, story telling, and filming! Doesn't get any better than this.
True
And those youtubers recapping Amiga 1200s think they are experts; well done, you replaced a belt on a walkman - this man is a true expert!
Watching this inspired me to fix a memory module I had, and I made a complete mess of it. :(
I have a lot of respect for this guy. Who on earth has this kind of passion..
This was a master class on super detailed down to the bone electronics repair and troubleshooting. I am not a person that gives up easliy. But this cassette deck would've kicked My butt. Made me want to throw away My soldering and work station.
One of the best channels for electronic repair by far! 👏👏
I’ve never seen anyone work to this level of detail. Mark really is the best engineer I think I’ve ever seen at work.
Be honest - who else would’ve swept this all into the bin hours ago? 😂😂
That’s a £1000 deck nowadays so it’s worth the effort 👌
Not me. It would have stayed on the bench until it worked. You have to be patient with 40 year old cassette decks and the customer has to be willing to pay, which is always the problem. All you ever hear is 'I'm sure it's something simple'
@@analoglooney This. It's all I hear, and you _know_ you won't be able to charge for the work that's actually needed.
@@amnril not really. There are a couple of working ones on ebay right now for far less than a £1000.
I actually know a couple of very capable and experienced electrical engineers and both of them said that they would have recycled this for parts many hours ago - and both are awed and amazed at Mark's level of detail and expertise in Getting. It. Done. 😲
My wife and I absolutely love watching Mark. She has no interest at all in electronics or soldering but sits there completely captivated. Brilliant. Looking forward to part 3.
You're a lucky man. Mine is derisory about any interest I have...
@@BM-jy6cb look for another woman 🤣😂
That's the mark of the truly great channels: keeping your interest, no matter what the subject.
I sat through half an hour of a factory tour of frisbee golf disc manufacture (yes - really) just because it was presented so well by enthusiastic people.
Wow, you put some serious effort in. It's great to see these quality vintage audio components given another life....hopefully.
He is an artist technician entertainer and scientist- all in one.
The quality of your films keeps getting better! Well done Mark
When you smile, everyone smiles back
As a retired engineering technician myself, watching Mark's videos makes me wish I was back on the job.
What's wrong with having it as a hobby? Then you also get to choose what you work on.
@@paulmichaelfreedman8334 Don't have a proper place to set up shop at my house, although I may in the future.
@@HansDelbruck53 I know what youy mean. I have about 8 square meters for my little mancave. I make do by making optimum use, but I really need three times the space.
Eight square meters 😂 you can dance while working, I have a workplace in a space of 0.8 x 2 meters in the corner of our bedroom (the photos are on EEV, the last modification of the workplace is on page 194 and I think it starts on page 139 my nick Edison) before that I had a workplace built into wardrobes. When you want space, you can always find it 😁
Nice day 🙂Tom
😢
Not just the electronics, but the mechanics too. You, my friend, have golden hands and brain
Of course Mark's skills are superlative, but credits to Aiwa for such a great service manual. Today, not even in high end electronics you will find such literature!
that AiwA is a masterpiece of an era. Total topnotch.
Both AWAI and Mark are both superb. I agree, great documentation is necessary for complicated products.
The original manuals are even better than you see here - the circuit diagrams are overprinted in blue, so the component legends are legible.
This conscientious work ethic and precision is something many people would envy.
Does anyone else just want to throw away their soldering iron after watching these incredible videos? I will never be on this level
I have spent over 50 years doing consumer electronic repairs and your soldering iron
remains by your side, but more often than not todays gear requires a rework hot air station.
Mark is a master of his craft.
I might not throw it away...but seeing Mark I deff know I would've kicked that cassette deck all over the place...then have more work to fix it 😂
I can understand that, Mark has a more laid back but thorough way of trying
everything he can to fix the difficult ones.@@danp101
I saw many technicians in the 90s, But I've never saw this low level of repair, Rewiring motors, Rebuilding plastic knobs... In the air force it's called "Level D Work". A Level - Airplane level repair, B - Garage, D Level - Lab. Not many people reach level D.
I worked for the MOD as a civilian and you were only allowed to use the official spares
not design amd make your own.
Mark is very dedicated to his work and tries everthing he can to repair anything to full working order.
This is fine if it is a hobby, but you can't make a living doing these depths of repairs.@@sharonleibel
why have you not got a million subscribers. Love watching you work mark.
Amazing patience, knowledge, and tools. Captivating to watch.
PCB design and build! Next level repairs now Mark. Great stuff!
It's a good job these videos are in parts as it gives the customer time to save up for the final bill.
This is the best electronic repair show on you tube well done informative and humorous
Probably this service should cost to the owner the same as an out of the box Nakamichi Dragon, but with silver face plate hahahaha! It's priceless!!
Amazing analysis and repair job Mark!! Thanks for sharing!!
Such a nice guy, allways in a good mood.....so much fun to watch his videos! 😘🙏
The gold standard of electronics repair!
I am gobsmacked about the care and ability that is portrayed on this channel.
Of all the other channels of this stripe, I have never seen anything to match it. I probably would be horrified if I knew how much it cost to do the repairs; I particularly have a thought about my laser player that won’t spin up back from the 90s whose caps are probably ancient history.
But I understand and truly enjoy watching the craftsmanship.
Bravo. They don’t make craftspeople like you much anymore.
Very interesting Video and a very nice Guy too!! Best regards from Germany!
One day I did a similar repair of Texas Instruments Calculator. Someone stilled gasoline on it. Its PCB and LED panel got damaged after. So I carefully soldered out all components, and then made a new PCB with a similar technique as in the video. I had to buy a new LED panel though. The calculator worked again as new after I soldered back all components. This video is a very nostalgic for me.
I haven't watched the new episode yet but wanted to comment how happy I am to see a new episode posted today. Cheers everyone watching or about to watch and to Mark for the hard work he puts into the videos for us.
I almost didn't bother watching this one because I'm not a fan of cassette tape decks and don't think they are worth mending but I'm glad I did !
I came to the conclusion that it's not the equipment that I enjoy, it's the troubleshooting and diagnostics that keep my interest !
This is how it's supposed to be. None of this, 'something's gone wrong with it so chuck it out and replace the whole thing', malarkey, here. Diagnosis of the fault and repair/replacement of individual components to make things work again, is the order of the day. Something that requires skill, knowledge oh, and the right equipment.
Mark, your pcb manufacturing technique is nearly identical to mine. When I was 18 (I am 52 now) I made my own UV box for exposing photo positive pcbs, and I still have it, and I still use it 😁. And I also use double layer transparencies, laser printed. Back in the late 80s I had transfer sheets with through hole pads and traces and actually made them by hand until I got a second hand laser printer for 25 guilders in 1992 (About 5 1992 pounds) ,an HP laserjet II (300 dpi). Late 90s I got a 1200 dpi laser printer which gave the designs razor sharp traces. I also mucked about with a roland plotter but it was cumbersome and slow. It's now disassembled waiting for a laser head for directly exposing photosensitive pcbs, in a bitmapped scanning configuration (no vectors). Will be driven by a pi pico's PIO state machines.
God I love reminiscing those days.
Awesome! I have 10% of your skillset in diagnosing issues like this - I would have given up probably after the motor PCB rebuild! Now you have me hooked on waiting for part 3...
This video is just perfect, the direction, the framing, the telling, the repair... I can only learn from a channel like this! Thank you for these great videos.
Just amazing talent. Almost impossible to find this level of knowledge these days. Thank you for sharing this project with us.
You make your own PC Boards. Mark, is there no end to your talents? CHEERS !
wow, this fix is a real test of patience and determination!
All 40 year old cassette decks are. LOL. They are the most time consuming repairs by far and you have to be sure the customer will pay for the time. Most machines had a service life of less than 5 years so it's amazing any of them are still working at all.
It's like watching a combination of a brain surgen and an artist , your skill set is honestly next level, on another video a toggle switch was missing, no bother I'll just get on the lave and make one, and it was better than the originals , great work Mark
Amazing, this is what I do for a living and I would have given up on that thing and kindly told the customer to toss it. Mark you're fantastic.
Whenever i see your face when talking, my head sings: just another day in paradise because you remind me of the singer....
Phil Collins))
Your channel is addictive. I’m constantly checking it for updates. This (at least) three parts series is top notch. Considering how much time you’re spending on this project, this tape deck must be invaluable. Keep up the good work!
Mark... I have Watched many many many Electronic Repair Videos on RUclips and I can Truly Say this is the Best!!! No One uses Heat or Cold anymore. Who would Rewind a Motor today? Let alone make a PCB? When was the last time you saw a Slolder Sucker!? A Must See for all Technicians starting out!
Mark has the patience of a saint! I would've given up when I found a replacement motor wasn't available. Kudos!
Right up my street this; the diagnosis, fault tracing, playing the scope like an expert musician, using common sense for substituting unavailable components & just the awesome hand skills and inventiveness. I am in awe.
These videos are simply compulsive viewing & so watchable for any tech out there and the rectification skills are matched by the superb multi-camera editing skills. It must take hours & hours to put these together & I hope I speak for everyone by saying a big thank you for entertaining us all with your superb videos. Well done Mark.
I like the way Mark is more than happy to share the things that don't work out. That's real world fault-finding - showing the entire process.
And everything gets fixed in the end - the only variable is time. But I'm not sure I would have the time and patience to design and build my own motor controller to run the motor I re-wound myself.
I dofff my cap to you Mark. Top man!
Every time I get a notification that you post a new video I drop what I’m doing and watch it
I was ever so happy to see near the end Mark failing to repair it as this means I can enjoy the delights of a part 3.
Best one yet! Fantastic detective work, Mark.
I personally am completely baffled by all of Mark’s techy talk which I don’t understand and have no interest at all in electronics but his skill engineering and know how just keeps you glued to your screen. Well done Mark you should be on mainstream TV.
Mend it Mark on British TV? I think the farm animals who watch it would be bemused
Thanks!
joys of fixing vintage electronics
Mark, hi from New York City. It’s a pleasure watching you work. Thanks for the vid!
I love watching and fixing things... you're on another level. Awesome!
Incredible, outstanding, amazing, gorgeous - simply wow
I LOVE YOU MARK.. A TRUE ELECTRONICS SURGEON, BROOKLYN NY
Je n'ai jamais vu autant d’énergie et de moyens développés pour la réparation d'un appareil de ce type...
Bravo !!
I have never seen so much energy and resources developed for the repair of a device of this type...
Well done !!
G,day Mark from Sydney Australia. I can't believe how complicated a 1980s tape deck is. I guess pre- MOSFET
* Really like your crocodile clips for bench multi meter uF testing.
* Manufacturing the PCB and scavenging the components for the DC motor was "jaw dropping"
* Dolby noise reduction, such an 80s feature.
* Those caps at power supply, didn't show any deformation (swollen tops)
* I Wonder if you could purchase a new DC motor for that model, instead of internal PCB power modulator?
Thanks for filming your work.
🌏🇦🇺
For many years in bands and professionaly in AV production we used cassette as our universal playback & working medium. Cassette was simply everywhere, until a flirtation with Mini Disk for some of us & R-DAT for AV & Video production. I still own a Denon Dolby-C deck now.
Cassette had some limitations, but it was so convenient as a near universal medium. It's a pity that internally these decks are often complex & a bit fragile. It's a blessing that someone (Indeed anyone anywhere) might be able to keep these decks alive. Even if it's only to transcribe our work over to a digital file format. What an amazing man.
Just pure pleasure to watch..
Your perseverance is amazing. I definitely learned to be patient and follow the flaws step by step. I'm looking forward to part 3. Thanks for the lesson. Subscribed
I’ve never seen this man loose heart. Even after making some pretty humiliating blunders (for Mark anyways), he is immovably cool, calm, and collected. He Should’ve been an astronaut for how professional he is!!
Now _this_ is what I'd watch on TV!
I could watch these all day.. 😊 I get consumed by Marks enthusiasm and total skills.
Mark you continue to amaze me! Nothing seems to quell your can-do or can-fix. Such a level head! Today's electronics weren't exactly made to be repaired. Those engineers obviously never met you!
most of the time I have no idea what you are doing. But I am absolutely here for it! Il get the popcorn for part 3
You are such an Inspiration to all us diy electronic buffs Mark. Keep up the good work.
Wow, this is one of the best repair channels on RUclips, many thanks to Tom Evans Audio, without him I wouldn't have found this great channel 😉
Mark, I just discovered your channel and love your videos!
I have an Aiwa F770 that has been apart in a box for over a year waiting for me to finish repairing it. It's almost as complicated as yours and is a pain to work on. I had already gone through some of the same mechanical issues as yours had. My motor was messed up too. These videos inspired me to get it back out to finish troubleshooting a record problem. I just found and fixed the cause of that problem. The SFR501 and 502 were both open circuit. The style pots they used have mechanical connections for where the leads connect to the carbon traces, and they are flaking out with age. I hope no more problems show up as I button things up LOL
Does your 12v regulator get hot? Mine does! Something's making it work harder than I'd like.
This is on a totally another level of repair. I just don't want the video to end. Awesome work making the new board for the motor. Awesome work.
man i love how old school you even down to making your own pcbs
Waited patiently for Part 2 .... Amazing Mark ! Now I have to patient again ....
Great work on something way more complicated than it should be! The history on those AIWA systems is an electrical nightmare. On the up side, they did sound nice while they worked.
Hi Mark 😲 WoW absolutely amazing diagnostics and repairs 👍, on the one hand I'm a former service technician (today it's just my hobby, which I returned to six years after my workshop was completely robbed), but above all a huge fan of the AIWA brand.
Fortunately, I never had such big problems, with my AD M700 tape deck, I changed the motor after 9 years of use (fortunately, I got a new original), I changed the heads and the pressure roller. After thirteen years of operation, I replaced it with the AD F910 model, where after about ten years of operation I changed all the belts - I still have the whole assembly today and it works absolutely perfectly - newer machines have long since given up.
I admire your care and thoroughness, there are not many such thorough technicians (I am also very careful and I value such precise work all the more). Your enthusiasm and humor is contagious, I always look forward to every new video and I'm so glad I discovered your YT
Nice day 🙂 Tom
I have the adf 910 it’s a great deck always liked aiwa 😊
I also own the magnificent M700.
@@tremayne3 Congratulations it's an absolutely amazing machine. In 1991, I was working on a sound program for our agency and I needed to record some sounds and noises from the archive of the Czech Television. I was very surprised when I found a rack with thirteen AIWA M700 tape decks in a recording studio next to top professional studio tape recorders.
Nice day 🙂 Tom
@@AnthonyToth-t5v🙂
@@AnthonyToth-t5v Great machine, originally I wanted to replace my M700 with a 9000 but it cost like three 910's and I didn't have that much money. The XK-S9000 model has such a peculiarity (the 7000 model also had it), the mains transformers are mounted on the outside of the rear panel in metal boxes.
Nice day 🙂 Tom
I remember auditioning one of these decks back when they were new. I was mightily impressed with its performance. The only thing that held me back from purchasing one was the price! Insanely expensive, but this video explains why its cost was so high. Mark, your diagnostic skills are second to none, your quality of repair, camera work and editing make your videos a pleasure to watch. Thanks for posting such superb content. Catch you on the next one!
This is some amazing stuff. Never seen anyone fabricate a pcb from scratch. Again. Amazing stuff.
I don’t need Netflix anymore. This is so thrilling!
You sir, have the patience of a saint! I sincerely hope all of your hard work comes to fruition.
Couple things, 1. love the SITEREP at the beginning. 2. hope whoever you repaired this for enjoys their tapes for many years to come, even though it seems like a lot of work for an aged media. 3. Love the content I don't do much electronic repair, but your knowledge and recording of your work will prove priceless to the future of mankind. Ever come to Cleveland OH USA look me up, happily buy you a beer or a pint :) Also congrats on 68K subscribers. Hope it gives a good feeling inside that your content and hard work affected so many.
As soon as that pcb came to life outta that gooey stuff, the respect-level-meter increased exponentially 🙌 hat's off to you sir
Mark amazing , you need an honour you are the king of dedication creativity and perseverance, absoloutley brilliant . Looking forward to the next video !
I absolutely loved this having worked for Dolby Labs for 17 years! My wife worked there as well. She organised Dolby licensing. Things like organising the World Cup being in Dolby Surround on the telly :) Fun times.
I would recommend that you expand certain rails on the PCB to provide a flood fill. This will help heat dissipation but the main effect will mean less copper to etch which will mean your ferric chloride will go further.
I love watching you do these intricate repairs and whenever you chuckle along the way, it's contagious and I feel delight :)
I haven't watched it yet but I have been eagerly awaiting part 2.
This three parter (surely it will only be 3) is amazing so far, it covers so many different topics.
Can’t believe the orgy of wires in that thing.
Kudos for handling it!
Those wires were tied into elaborate forms, the machine is after some inexpert intervention and it's even harder to find a fault - you don't know what was inexpertly affected
Nice day 🙂 Tom
Mark. Wish you wouldn’t put new vids up ……..my life goes to a stop till I see the end ….,I’m not an electronic engineer. Far from it ….but got hooked on marks vids …..like watching. A detective solving a crime ….addictive 10/10. Till the next one. Thanks mark 👌
I'm super impressed by the capabilities you have with repairing this! Far above and beyond for your customer. That is a nice tape deck.
I'm really amazed that all those chips and analog components are still manufactured and available.
I have this same Tape Deck, same problems and squeals with a shifty pitch motor. After watching your video, I may not take on the effort. If I do, I will be listening in again. Thank you so much!
Mark hurry up with part 3 ….absolutely brilliant stuff 😁
Amazing bro, very complete tools, everything is available.
The owner could have bought a dragon with the repair costs, however fantastic to watch a master at work
Mark is one persistent patient engineer at repairing complicated electronics, above my class of skills.
One of the depressing things about watching Mark work is that you just know the repair techs in 90 percent of the places most of us live would *NEVER* apply this level of expertise and time/work/diagnosis to some old tape deck we brought in. Technicians like this and 12voltvids guy are a heartbreakingly small percentage of what you can find out there.
That is awesome work, Mark. With all the time you’ve put into it, that deck would be Nakamichi value.
Really enjoyed that Mark, i wasn’t expecting a Part 3 but I’m glad there will be as i love these old cassette decks, thanks
This guy is a bloody genius. Hats off to you.
You have the patience of a saint; even if it had been my tape deck - I would probably have thrown it at a wall by now.
Fantastic work as always Mark. I commend you for putting that much effort into an Aiwa.