yes and for starters since it can charge our batteries to 1.5v the same as those expensive ones, the only missing here is 1st the display which means you need a battery tester to check if it's already 1.5v before you can use it. second, litokala can only fast charge 1pc. to 2pcs. batteries with an output of 2000mA for 1pc. & 1000mA for the 2pcs., then if 4pcs. it automatically reverts to the lowest which is 500mA. it's not that bad especially in a competition like in the brickyard where we can only entry one car at a time and have a long waiting line, there's plenty of time to fully charge the batteries.
@@DEEMini4WDPH the one im using doesn't have a screen just a battery charging indicator and can charge using microusb and that means it can also charge through powerbanks that you can carry while waiting on the line and pull out the battery if it's your turn to race. do you think is it a nice trick or a cheat? 😂 haven't done that thought.
kelangan ba naka bearing na lahat for bmax? galing lang ako sa BY kanina wala sila nung break set pang fma. tas binili ko nlng muna ung tune up kit eh pang tmac un dba
mas mabilis po kasi sa cornering kapag bearing ang gamit mo, para makamura yung nilagay kong bearing dyan sa video kasi 6pcs. na agad yun sa isang pack kaya malalagyan mo agad yung front at tail, sa Brickyard ko lang din nabili yan. in addition, kapag mabilisan na ang gamit mong motors madali masira ang rollers kapag plastic lang ito, sa case ko kasi pang support lang yung plastic rollers at yung bearing talaga ang nakaka-absorb ng impact dyan sa video at dahil metal sya mas matibay kesa plastic at hindi agad mapupodpod or worse mabali pa. kung tuned motors like in tmac or stock advance category ok lang plastic rollers kasi una yun talaga requirements pangalawa hindi basta basta masisira yung plastic kasi hindi naman sobrang bilis nung car natin.
Interesting, the only time I've broken a plastic roller ever since going back to the hobby is when I forcefully pushed the roller bushing in. setup ko ng rowdy bull ngayon is GT Advanced japan version which requires Hyper dash motor and use plastic rollers.
actually wala pong sponge sa front, tamiya tape lang na marami para medyo kumapal, tapos red lang din ilalagay ko kung kailangan ng break kasi yun lang ang meron ako as of now eh.
Nice setup/video master, hopefully makagawa kadin ng low cost bmax for MS ^^
BGM awesome!
Nice. Thank you bro. 😊
Grabe tulin naman kahit walang wheel bearing
Nice setup :)
Motor has been break in?
Hi I got question
How much was the total for this builld? Planning to build MA next
less than 2,500
Would you recommend litokala charger over skyrc/opus if you’re on a tight budget?
yes and for starters since it can charge our batteries to 1.5v the same as those expensive ones, the only missing here is 1st the display which means you need a battery tester to check if it's already 1.5v before you can use it.
second, litokala can only fast charge 1pc. to 2pcs. batteries with an output of 2000mA for 1pc. & 1000mA for the 2pcs., then if 4pcs. it automatically reverts to the lowest which is 500mA.
it's not that bad especially in a competition like in the brickyard where we can only entry one car at a time and have a long waiting line, there's plenty of time to fully charge the batteries.
@@Exaflare23 ohhhhhh I see I see.. Thanks for the information. I'll order next month but the one with the screen :)
@@DEEMini4WDPH the one im using doesn't have a screen just a battery charging indicator and can charge using microusb and that means it can also charge through powerbanks that you can carry while waiting on the line and pull out the battery if it's your turn to race.
do you think is it a nice trick or a cheat? 😂 haven't done that thought.
@@Exaflare23 hehe.. good technique I could say :)
how much total po ng build nyo kasama ung model?
idol nakabreak in po yung HD3 or straight from the box yung pag gamit?
break-in na po yan, yung mga una kong video using HD3 hindi pa kita sa speed ang bagal.
@@Exaflare23 salamat idol
kelangan ba naka bearing na lahat for bmax? galing lang ako sa BY kanina wala sila nung break set pang fma. tas binili ko nlng muna ung tune up kit eh pang tmac un dba
mas mabilis po kasi sa cornering kapag bearing ang gamit mo, para makamura yung nilagay kong bearing dyan sa video kasi 6pcs. na agad yun sa isang pack kaya malalagyan mo agad yung front at tail, sa Brickyard ko lang din nabili yan.
in addition, kapag mabilisan na ang gamit mong motors madali masira ang rollers kapag plastic lang ito, sa case ko kasi pang support lang yung plastic rollers at yung bearing talaga ang nakaka-absorb ng impact dyan sa video at dahil metal sya mas matibay kesa plastic at hindi agad mapupodpod or worse mabali pa.
kung tuned motors like in tmac or stock advance category ok lang plastic rollers kasi una yun talaga requirements pangalawa hindi basta basta masisira yung plastic kasi hindi naman sobrang bilis nung car natin.
Interesting, the only time I've broken a plastic roller ever since going back to the hobby is when I forcefully pushed the roller bushing in.
setup ko ng rowdy bull ngayon is GT Advanced japan version which requires Hyper dash motor and use plastic rollers.
ano brake set up mo sir front and rear?
AR break set sa likod, sa harap FRP with tamiya tape pero walang sponge.
@@Exaflare23 that ar brake set use sponge ? what sponge colour ?
@@adamredcode8792 Red, item no. 15492
Pwede pla ganyan setup newbie lang ako gusto ko try bmax. Ask ko lng ano po color ng brake sponge sa front thanks po
actually wala pong sponge sa front, tamiya tape lang na marami para medyo kumapal, tapos red lang din ilalagay ko kung kailangan ng break kasi yun lang ang meron ako as of now eh.
Nahinayang ako dami ko tmac noon