Been riding bikes since I was 3 yrs old , started with the plastic ones you push with your feet 🦶 then gradually went to the peddle ones, now got me a Dyna and Road King 👑
Beautiful Bike ! I just came across your channel in my feed actually and I'm happy to support your efforts and those of other fellow moto content creators. I look forward to seeing and hearing more from you in the future, keep up the great work and ride safe out there.
Nice , I jus did my bars , 18’s bout to do my wheels now. I was going 21. But after reading these comments, ima go 23. Word for word from what I read lol
I’m going down for a couple spinal fusions and while I’m out the bikes going under the knife, too. I would love an update on how the 23” has treated you over the last two years of riding!
Hi. Did you have to add spacers to raise the fender? I also noticed that you changed the front light bars,was that for clearance so that the fender would bottom out on it?
Jasmine, I picked up the dual disk 48 Spoke Ultra 23" wheel and the 130-50-23 tire. Did you have to raise the fender any? If so, did you use some fender risers? I am having difficulty in finding fender risers for a 2007 Road King Classic. Found them for the 2014 and up models. Thanks Dante'
Sharp! One question what is the purpose of the amber lights? Or just a different look. I know from years gone by we had accessory lights amber color for fog they said it cut the fog better. Anyway very sharp!
beautiful bike, Jasmine! Curious where you got your front recessed blinkers? The only style I can find that matches the stock base is by Drag Specialties but it doesn't have the 'hood' on top like yours. Thank you!
If you don't mind where did you get your front fender I have a 16 I'm looking at putting a 23 on and would love to put that fender on the front thank you sir have a great day
The front is lowered 2 inches with progressive lowering springs which are stiffer than stock.I also added heavy duty fork oil to make the suspension even more stiffer as an extra preventitive measure to avoid any bottoming out or clearance issues.
They make them for your bike also just look them up in ebay or google them. A lot of shops out there just want you to take the expensive route to make more money from you. I actually slotted the mounting holes on the fender with a grinder to raise up the fender. I did it this way cause at the time when I wanted to put a 23 on my bike the risers weren't available yet. The problem with that is that if you don't know what you're doing you risk the chance of ruining the fender and also you gotta stick to running a low profile 23 tire cause a regular won't fit. I run a vee rubber 130 50 23 tire on my bike is the only one I can fit.
If you're talking about the fender risers you can get them in eBay or Google Harley fender risers and it'll show you more places where you can get them
Matt Jefferis it has a matching wheel on the back and yes the bags completely covers the wheel so you don't really need to have a matching wheel on the back if you want to save some money
Matt Jefferis bags are 4 inch stretched and the bike is lowered 2 inches on the front and 3 inches plus on the back... I say plus because it has 3 inch lowering brackets plus 1 inch shorter shocks, the bike is not set up for two up riding.
how you do it with the stock fender? I'm trying to do this ad well and everyone says you need a triple. just wondering what other parts you need or labor to get it done.
I modified the mounting holes on the fender to raise it a bit cause if not the wheel won't fit. if you go with a taller tire 120-70-23 you're gonna have to get an aftermarket fender for a 23 wheel. btw the tire on the wheel is a vee rubber 130-50-23.
better than stock because of the passing lamps on the engine guard which I always turn on at night. If I don't turn them on visibility wouldn't be too good because of the modifications I've done to the headlight which dims the lighting a bit.
I have a 03 Fat Boy. Candy Brandywine with Ghost Pattern Flames. I have steel solid wheels, I wont Twisted Spokes with White walls. Everyone keep telling me unless I get fat spokes they are a pain in the ass because you have to tighten them all the time.
Ed Dominguez yes I had to modify the fender if you scroll down the comment section you'll get to the part where I explain what I did to it btw a 21 inch wheel should fit without any clearance issues
the 21" wheel is laying around in my garage and no the 23" wheel don't fit inside the stock fender unless you modify it so that you can raise it a little to give you enough clearance to let the wheel spin without rubbing which was what I did. Also I'm using a low profile tire 130/50/23 which the outer diameter of that tire it's only slightly larger than that of a 21 inch tire. If I was to use the taller 120/70/23 then I would've definitely had to buy an aftermarket fender or get the fender risers.
@@jasmineaguilar7671 i am considering 23" mammoth 52 on my 2016 Road king, do you think 130/60/23 tier will fit the stock fender with modifications ,thank you
@@mohamadzaza5194 yes you can use stock fender but have to get fender risers. they're brackets that lift your fender up to make room for the bigger wheel
took out the original license plate mount off the grab bar and then drilled two holes on the fender and bolted the license plate mount on to the fender
U will probably need a rake kit and to mount your fender higher there may be more things u have to do but im not sure the rake kit is bolt on by the way
yes, there is very little room to play with on the stock fender mounting holes... if you got the cash just get an aftermarket fender and you don't have to worry about tire size since those fenders are made to fit any 23 tire. even with an aftermarket fender you don't need to rake the bike.
Ultima king spoke... I had to put a tube in it cause it was leaking through one of the spokes, I had to do the same to the 21 that was on it which was a DNA mammoth.
![FNAF vs TF2 - Episode 2 [SFM]](http://i.ytimg.com/vi/z5b3V2-VLb0/mqdefault.jpg)
I must say it looks great one of my favorite
Been riding bikes since I was 3 yrs old , started with the plastic ones you push with your feet 🦶 then gradually went to the peddle ones, now got me a Dyna and Road King 👑
Beautiful Bike ! I just came across your channel in my feed actually and I'm happy to support your efforts and those of other fellow moto content creators. I look forward to seeing and hearing more from you in the future, keep up the great work and ride safe out there.
Nice , I jus did my bars , 18’s bout to do my wheels now. I was going 21. But after reading these comments, ima go 23. Word for word from what I read lol
👍
I love it. That’s how I want mine except not to high for me on the ape hangers. Love the front tire size and tru dual exhaust.
That is a beautiful looking machine
I’m going down for a couple spinal fusions and while I’m out the bikes going under the knife, too. I would love an update on how the 23” has treated you over the last two years of riding!
beautiful.....like it like other guy without the chrome rails around the rear bags
thank you
Looks great Jasmine. I like the front fender without the rail and the saddlebags without the chrome side guards.
thank you
Hi. Did you have to add spacers to raise the fender? I also noticed that you changed the front light bars,was that for clearance so that the fender would bottom out on it?
I have questions. Did you have to add fender risers? Did you have to change the rake on the front forks?
this bike is perfection.
Did you have to change the rake to get to get the 23 to fit
Did you notice any worse difference in braking when just having 1 rotor versus 2?
did you have to change the fender for the 23" wheel and the rake or did you leave it stock
Your video comments were much appreciated, thx!
no problem
Cool homie lots of little modifications set up your vicla
Jasmine, I picked up the dual disk 48 Spoke Ultra 23" wheel and the 130-50-23 tire. Did you have to raise the fender any? If so, did you use some fender risers? I am having difficulty in finding fender risers for a 2007 Road King Classic. Found them for the 2014 and up models. Thanks Dante'
Dante Hawkins that can't be a 23. A 23 will not fit with a harley stock fender
not to ask a stupid question but what about the tire size in the back is it only one size for all road kings?
looks great bro!! ... can't wait to see the video of it rolling! *subscribed*
Sharp! One question what is the purpose of the amber lights? Or just a different look. I know from years gone by we had accessory lights amber color for fog they said it cut the fog better. Anyway very sharp!
beautiful bike, Jasmine! Curious where you got your front recessed blinkers? The only style I can find that matches the stock base is by Drag Specialties but it doesn't have the 'hood' on top like yours. Thank you!
Is the front wheel finder stock?
Did you have to get different fenders or Forks to add a 23 inch wheel??
If you don't mind where did you get your front fender I have a 16 I'm looking at putting a 23 on and would love to put that fender on the front thank you sir have a great day
It's a modified stock fender but you can get fender risers to fit a 23 wheel on a stock fender
What brand tires do you have? I've been looking everywhere for a white wall for my 23inch
Jessica Melgar vee rubber tire
Did you cut and rake neck or just change triple tree to 6-9 degrees ?
i have the same bike. was wondering how you fit your 23 on and if theres anything special i need to do other than getting a low profile tire
ok thank u verymuch i appreciate it
Did you add additional rake to this? Is this the stock triple tree?
stock triple trees
What weight of fork oil did you use to stiffen up the forks?
adorable bike.
How much did you lower the front? Does your Fender hit the crash bar or the bottom Triple Tree on bumps for turning?
The front is lowered 2 inches with progressive lowering springs which are stiffer than stock.I also added heavy duty fork oil to make the suspension even more stiffer as an extra preventitive measure to avoid any bottoming out or clearance issues.
If I go with a 23 fender do I still need to use risers?
Beautiful bike. Did you rake your forks?
What exactly did you do to your fender to modify it? I was told by many shops they don’t make a riser for 2013 and below for the 23”
They make them for your bike also just look them up in ebay or google them. A lot of shops out there just want you to take the expensive route to make more money from you. I actually slotted the mounting holes on the fender with a grinder to raise up the fender. I did it this way cause at the time when I wanted to put a 23 on my bike the risers weren't available yet. The problem with that is that if you don't know what you're doing you risk the chance of ruining the fender and also you gotta stick to running a low profile 23 tire cause a regular won't fit. I run a vee rubber 130 50 23 tire on my bike is the only one I can fit.
Hi Jasmine, Where did you find the chrome fillers between the extended bags from? Great looking ride!
kuryakyn filler panels
Did you ever change your trees? I just put a 23’ on mine and at 50 it has a bad wobble
dip c2c stock trees and no I don't have any issues with my set up... get your wheel and tire balanced if you haven't done it so far.
I absolutely love this sled man. What kind and color paint did you use for your headlight?
yellow headlight spray paint. I bought it in ebay
Nice ride bud, ?? Do you happen to have a link for the aftermarket fender you spoke of in the previous comments? Thanks in advance.
Fenders are stock the front fender I modified myself to clear the 23 wheel
If you're talking about the fender risers you can get them in eBay or Google Harley fender risers and it'll show you more places where you can get them
How is the rim holding up?? I wanna get one but I hear mixed reviews about that rim brand. And I dont have the cash for the ride Wright brand.
the wheel had a leak so I had to put a tube in but thats it it's still holding up good
Wow man great work on this bike! How much was it to get the frame chrome like that? It’s gorgeous !!
Those are chrome covers you can buy for the frame.
Who makes the kit? I want one!
What tire r u running in the rear
sweet bike, mines is similar but I have a 21, upgrading to a 23, where did you get your inner tube from for the 23".
Beantown Ryders thanks I got the tube from ebay
Jasmine Aguilar thanks I appreciate immediate response, all these shops up here trying to get me to rake it, I seen plenty 23 on bikes with no rake
What size bars are those and who makes them?
does your bags cover the back wheel up or does it match your front wheel so it doesn't matter thanks
Matt Jefferis it has a matching wheel on the back and yes the bags completely covers the wheel so you don't really need to have a matching wheel on the back if you want to save some money
thanks for the reply back it really helps just one more question what size are bags and how much did you lower the front and rear bike thanks again
Matt Jefferis bags are 4 inch stretched and the bike is lowered 2 inches on the front and 3 inches plus on the back... I say plus because it has 3 inch lowering brackets plus 1 inch shorter shocks, the bike is not set up for two up riding.
What size rear tire is that, 16 or 18inch? Also are those Carlini bars? 14 in or 16in bars.. Very well done bike.. Dante
Dante Hawkins rear wheel is 16 in bars are 20 in tall
Jasmine Aguilar did you convert to a single disk front tire? I have a 2007 roadking classic with dual disk and found the king spokes with dual disk.
Dante Hawkins yes the front wheel is a single disk wheel
Super nice is that a low profile front tire
What size front wheel is that and is it a 48 or 52? Thanks oh and love the bike
thank you it's an Ultima 48 king spoke 23 inch wheel
What size tires are you running in the rear
Got all tha bell's an whistel's NICE SCOOTER MAN ✌
Cecil Shivers thanks
Jasmine Aguilar no problem dude 🍻
What size of tire in the back
hay homie what modifications did u did to ur front fender
Bad ass jasmine !
how you do it with the stock fender? I'm trying to do this ad well and everyone says you need a triple. just wondering what other parts you need or labor to get it done.
I modified the mounting holes on the fender to raise it a bit cause if not the wheel won't fit. if you go with a taller tire 120-70-23 you're gonna have to get an aftermarket fender for a 23 wheel. btw the tire on the wheel is a vee rubber 130-50-23.
no need to rake the bike unless you want that raked out look
Stock height in the front?
Dope azz bike!!!🔥🔥🔥🔥
Hey sorry for all the questions but how are your lights at night?
better than stock because of the passing lamps on the engine guard which I always turn on at night. If I don't turn them on visibility wouldn't be too good because of the modifications I've done to the headlight which dims the lighting a bit.
Looks good what kind of Rims are they?
Can wheels
Dna*
I have a 03 Fat Boy. Candy Brandywine with Ghost Pattern Flames. I have steel solid wheels, I wont Twisted Spokes with White walls. Everyone keep telling me unless I get fat spokes they are a pain in the ass because you have to tighten them all the time.
The tire size 130/60/23 shinko ?
thats a dope bike
John OReilly thank you
Where can i get this wheel and fender?
Nice Bike, How did you lower the front?
Progressive lowering kit
What size bags you running? What's the name of your bars?
Nick Woodruff 4 inch extended bags... they are ebay fiberglass bags.
is ur front disc the stock size if not wat size is it cuz im getting the same size front rim????
Thomas Ramos yes it's stock size
What year of this bike
any mods on front fender to keep from rubbing on inside fender, toward the rear of fender. I'm having issues with my 21 dna wheel.
Ed Dominguez yes I had to modify the fender if you scroll down the comment section you'll get to the part where I explain what I did to it btw a 21 inch wheel should fit without any clearance issues
Thanks
What sizr wheel are you running out back?
Stock
From where would you get the passing lights on the engine guard
by getting a pair of engine guard spot light clamps. the ones on the bike are from drag specialties
That motorcycle is a work of art! Question. How much did you have to raise the front fender? Thanks.
higgimwgun thank you.. i explained in the comment section what I did to the fender to make the wheel fit... scroll down a bit and you'll see it.
thanks so much
Orale gracias vato loco
Also did you have any issues with the fender hitting the tire
the 21" wheel is laying around in my garage and no the 23" wheel don't fit inside the stock fender unless you modify it so that you can raise it a little to give you enough clearance to let the wheel spin without rubbing which was what I did. Also I'm using a low profile tire 130/50/23 which the outer diameter of that tire it's only slightly larger than that of a 21 inch tire. If I was to use the taller 120/70/23 then I would've definitely had to buy an aftermarket fender or get the fender risers.
@@jasmineaguilar7671 i am considering 23" mammoth 52 on my 2016 Road king, do you think 130/60/23 tier will fit the stock fender with modifications ,thank you
@@mohamadzaza5194 yes you can use stock fender but have to get fender risers. they're brackets that lift your fender up to make room for the bigger wheel
@@jasmineaguilar7671 thank you so much for your reply
@@mohamadzaza5194 no problem
hey what seat u have on?...I should do new video of my bike
HD brawler seat
Do u have a rake
Awesome Awesome Awesome
Does anyone here have the link for a 23 inch inner tube for this wheel and tire set?
Where did you order your yellow passing lights at if you could hit me back that would b firme
phatcat321 ebay look for yellow passing lights
Okay bro! It’s all your fault. Just put a 23 on mine. Rides like a dream! Thanks for the inspiration.
higgimwgun lol no problem...
higgimwgun i was told 23 inch ride rough? What's the performance and handling like? That's what I want on mines.
Does the 23" wheel ride different than the 21''?
nice ride
Nah feels the same to me... thank you
The you ave to change the fender to fit the 23 " wheel look nice
How did you mount thelicense plate bracket under turn signal light bar if you don't mind me asking
took out the original license plate mount off the grab bar and then drilled two holes on the fender and bolted the license plate mount on to the fender
nice Firme vicla
thank you
Wat size tire u got on it
Did you HAVE to put a tube in it?
higgimwgun yes
What size bags
I have 05.. Rking.. Can I put 23" on with out modifying anything...
U will probably need a rake kit and to mount your fender higher there may be more things u have to do but im not sure the rake kit is bolt on by the way
@@blvdbully57 how come other comments say you don't have to
@@keepinitrealTRUTHFUL i have seen a couple without it so i guess it isnt impossible but wuld ride better with it just my opinion
@@blvdbully57 do u know how much they charge to do job
@@keepinitrealTRUTHFUL no i sure dont sorry man
ok I got a 130/60-23 Avon. is that too big?
yes, there is very little room to play with on the stock fender mounting holes... if you got the cash just get an aftermarket fender and you don't have to worry about tire size since those fenders are made to fit any 23 tire. even with an aftermarket fender you don't need to rake the bike.
@@jasmineaguilar7671 what is the size of the tire?
@@mohamadzaza5194 130/50/23
did you have to rake the bike to fit the 23inch wheel ? how long are your fish tail pipes 42inch or 36inch?
GENERATOR OPERATOR DESTRUCTOR stock rake 36 in pipes
what a cool bike i enjoyed your video im making some changes to my electra glide just trying to get it ready for the summer thanks
GENERATOR OPERATOR DESTRUCTOR glad you enjoyed the video thanks for watching
Nice
what name of front 23 spoke wheel?what company
Ultima king spoke... I had to put a tube in it cause it was leaking through one of the spokes, I had to do the same to the 21 that was on it which was a DNA mammoth.
OK thx brother ,,I was considering getting same wheel, ,looks great
What apes are they ?
is the front lowered??
Ray Gil yes about 2 inches
Is that the stock fender
yes
Hello. Is it for sale? Great Looking Bike.
no, thanks for watching
Is it raked??
No
What year is this?
Nick Woodruff 2004 road king with 20 inch burly brand apes
What are those chrome strips on top of the lids called?
Aiden Mercado saddlebag lid spear trim I think harley discontinued them not sure, they make different ones from other aftermarket companies
did u change trees
no, bike has stock triple trees