its a crime that they do not do a factory catch can... just a slap in the face of regular owners. By the way David thanks for the catch can I'm hoping you will help me during the install in the next few months...
Question...if I want to install a Lingenfelter Intercooler cooling tank in my 2015 Z06, should I go with the radiator catch can mount for clearance issues?
the wild kit is different than the mild kit, the instructions for all are here drive.google.com/drive/folders/1uH1WjEilOhFrgH5T-XC_4M_cAGGLP149?usp=drive_link
Hello, I just installed my mms catch can and re-seated my blower. When I retorqued the bolts to 89 in lbs on two passes, only some of the bolts bottomed all the way out. I am also visually able to see one of the supercharger seals that is supposed to seal to the runner. I actually ended up using fresh bolts from gm too. What could I be doing wrong? I have been working at this all day, lol.
I installed this on my 2015 z06 per your video. The catch can isn't getting any oil and the supercharger is still getting the same amount of oil prior to installation. Not sure what the issue is but is anyone else experiencing this as well?
Hi I have the same system but i think the garage installed it wrong There are two hosing each hose connected to the valve cover so nothing installed in the valley cover and nothing installed in the intake is this right way to install it?
David Childress i installed the system for c7 z51 NA car .. mine is race can not bot PCV but after installation i recognized white smoke coming out of the exhaust also when I drained oil from can it looks like no oil at all it’s like new and nothing going through it .. they used both valve covers to connect both hoses if you have instagram i can follow you and send some videos for the installation
Hey Dave, I’m going through the process of rebuilding a lot of stuff on my corvette. Do you have any suggestions on proping up the supercharger for the belt? When I go to lift the supercharger up to get to the port, it seems to be getting stuck only on the corner where the port is located
David Childress yea that’s what I was thinking as well, I checked everywhere and all the bolts are out completely. I’ll be working on it some more today to see if it can get propped up
what size wrench do i need to remove the oil fill cap? i had a mms can for a 5th gen camaro installed at the shop and i am in the process of doing an oil change.
David Childress Thnx for that. So for the one you assembled in the vid. , are we able to drain it frm under the car? Coz i didnt see an area for that in ur vid-
On those bolts that hold down the supercharger are torque shield bolts GM calls for them to be replaced
Great video bro. One of the best tutorial vids I've see thus far...
its a crime that they do not do a factory catch can... just a slap in the face of regular owners. By the way David thanks for the catch can I'm hoping you will help me during the install in the next few months...
great tutorial, so how can i get my car to you and i will bring beer LOL!!!
David, I have a Z06 with the Fasterproms tank where you put the catch can. Where does your can end up getting mounted? Thanks, Sal
Great product! I just order mine a week ago. But I don’t see any availability vids on a 392 Hemi ScatPackWideBody. You have anything for that?
Excellent - THANKS!!!
"Two beer job" lol ...
The lid torque spec is 89 lb inches (or 10 Nm).
Great job.
Question...if I want to install a Lingenfelter Intercooler cooling tank in my 2015 Z06, should I go with the radiator catch can mount for clearance issues?
great video, i didn't even own one..
Does your Wild C7 Zo6 catchcan install the same way as this video? Any other changes minor Thanks.
the wild kit is different than the mild kit, the instructions for all are here drive.google.com/drive/folders/1uH1WjEilOhFrgH5T-XC_4M_cAGGLP149?usp=drive_link
Hello, I just installed my mms catch can and re-seated my blower. When I retorqued the bolts to 89 in lbs on two passes, only some of the bolts bottomed all the way out. I am also visually able to see one of the supercharger seals that is supposed to seal to the runner. I actually ended up using fresh bolts from gm too. What could I be doing wrong? I have been working at this all day, lol.
Compare the new bolts to the old bolts maybe they are the wrong length.
I installed this on my 2015 z06 per your video. The catch can isn't getting any oil and the supercharger is still getting the same amount of oil prior to installation. Not sure what the issue is but is anyone else experiencing this as well?
Send us an email with installation photos so we can review and troubleshoot.
Great video. Did you re-use the supercharger gasket and 10mm bolts?
we reused everything, i am sure gm would suggest you buying more from them
Hi
I have the same system but i think the garage installed it wrong
There are two hosing each hose connected to the valve cover so nothing installed in the valley cover and nothing installed in the intake is this right way to install it?
David Childress i installed the system for c7 z51 NA car .. mine is race can not bot PCV but after installation i recognized white smoke coming out of the exhaust also when I drained oil from can it looks like no oil at all it’s like new and nothing going through it .. they used both valve covers to connect both hoses if you have instagram i can follow you and send some videos for the installation
Do I have to remove my supercharger to install the catch can?
Hey Dave, I’m going through the process of rebuilding a lot of stuff on my corvette. Do you have any suggestions on proping up the supercharger for the belt? When I go to lift the supercharger up to get to the port, it seems to be getting stuck only on the corner where the port is located
David Childress yea that’s what I was thinking as well, I checked everywhere and all the bolts are out completely. I’ll be working on it some more today to see if it can get propped up
what size wrench do i need to remove the oil fill cap? i had a mms can for a 5th gen camaro installed at the shop and i am in the process of doing an oil change.
We have an oil fill adapter wrench specific for that
Great tutorial! No need for clamps on any of the hoses?
Very cool. Thanks for the quick reply and keep up the good work! I love the MMS can on my blown c6!
I can confirm this, they are tough fuckers, lol
chevy said few years just clean they goafuelinjector
wastolf t voiled the vartenty
Hey David- whats the difference between the Mild and wild? And can i drain the oil from the can? Seems very tight and no space to do that
David Childress Thnx for that. So for the one you assembled in the vid. , are we able to drain it frm under the car? Coz i didnt see an area for that in ur vid-
What about the blower side. Is there a block off?
This video covers the blower side of the system
Excellent presentation! I have a new grand sport where can I purchase this system?
So I have a 17 Silverado that I'm putting a lt4 supercharger on the 5.3 . Any way I can get the corvette kit with the Silverado bracket ??? $$$?
Is this installation the same as the 6th gen ZL1?
Can you guys do a ZL1 install?