Hey, do you have no idea how much this means. Thank you so much for taking the time to share this feedback with myself. Nothing but love and blessings to you.
8:12 I actually use the Regions-function in a completely different way in some cases. Which might be interesting to share! I often use the "Regions" function to change up the types of slices I get from samples. Instead of counting how many counts there are in a sample and then making that many Region-Chops, I'll just make 16/32/64 or 128 regions (depending on how long the sample is) regardless of the count of the original sample. That way I get slices in places where I'd normally never put them manually, often also off the grid of the original sample. Then I'll make a drum loop that I keep playing and I go look in the Region-Chops for slices that fit nicely together and go nicely with the drum loop. It makes the whole process feel like you're looking for just the right puzzle pieces to make the picture (your beat) show itself. In most cases you'll still have to edit the start and end points of the chops to get rid of clicks and pops. Or you can adjust the attack and release for the same goal. It works especially well with long samples that don't have any or have limited percussive elements in the instrumentation.
That's the best & most beautiful part about the MPC is that 10 diff people can use it 10 diff ways. You're comment makes a lot of sense. Cool way to work. Makes for so many more possibilities.
Main page Track 01>Transpose set to 1. Program 001>Warp samples> Global tab>note on. Samples tab>pad loop on. For different drum loops, I include them in the same mute group to alternate back and forth.
Always appreciate your videos. I learn something new every time. Mainly I’ve been doing some stuff the hard way at times. So thank you for basic shortcuts that I was unaware of. I never read the manual. Looking forward to your class.
Glad you enjoyed it, thank you for tuning in and be on the lookout. I’ll be dropping the sample programs tomorrow morning. Much love and blessings to you.
Hey man, thank you so much for the feedback and hopefully you’re able to dust off that MPC and put it to good use. I’ll be updating you as soon as it’s ready to be launched. Also, thank you so much for the feedback and support brother. it really means a lot.
Malo man! The content and delivery is exceptional! I love how you explain how to take a sample being careful to hit the beat. It is so clear WHY! I also love the video editing style, overlaying the MPC Grid display over the top of you hammering those tasty licks out live! Inspirational stuff dude!
I gotta say this video is really great and helpful from the beginning to the end because you teach how to trim using q link which is for me a very simple way of choose the start point and the end point of what you want from the sample, i found the manual chops and the way of erase them when you see yourself committing a mistake a really cool way to not lose hope on your beat i like also the explanation about the region to reduce the number of bars if you feel so.Keep the good work.
Hi Malobeats! I’ve been watching a lot of your videos recently and really fell in love with your content. I’m a DAW-based producer and i dont even own an mpc. But after watching you create beats and having so much fun, im seriously considering getting myself an mpc. I always thought i can make better music in DAW. I still do. But you taught me that its not always about efficiency or the outcome. If I can have that much fun and joy, MPC will be definitely worth it. Thank you for sharing your joy Keep up!
Hello. Can you help me? I bought a Akai Volca and 6 months later I cant still understand how to use it. (I use yamaha and boss products previously) ~ Can you slow down the video and show which buttons to use to get the cd/record samples into the Akai machine. Thanks. New Subscriber !! 🏁
Hola, Malo. So glad to see you uploading. I have always been inspired by you and have been here since the beginning. I am super excited about the course. Is it going to be on the MPC One? Blessings!
Es muy Malo! When u pitched it down, that just brought out the "Malo" factor..and the technique u showed about removing the annoying gap.. u should make a short clip about that, because many beat composers have that issue. Thanks for the content, brother.
thanks for this video, it was a very usfeul tips with this trim section. And a real pleasure to see you making a beat from this sample. Learning and fun, that's the recipe of your channel. Thanks a lot. I've got a question. will you do a video about the MPC granulator ? It seems we can do manuy things with this, but the manual is a little... light. Thanks again and take care.
Great tut, thank you. Somehow your videos doesn't allow saving to watch later! This is a bummer though cuz if there is no time to see when your video is offered. Usually it get lost and never watched. 😞Might want to enable this feature.
I just left this comment on another video of yours not releasing it was an older one, so here it is: I now have the MPC Key 37 and I'm looking for tutorials since it's my very first MPC product. Would you agree that it's the same exact same product as the MPC One Plus? There's no tutorials out there for the MPC Key 37 and I've noticed that the functionality is almost the same as the MPC One Plus. Thanks.
I’m watching several video , after pressing Shift / Convert .. You use Non Destructive And Some people Use Pad Parameters Slices .. Can you make a video explaining those 2 options
I have a song where I want to use a couole bars in multiple parts of the song. How do I go about do that as easily as possible? Is there a way to add to the program/banks without overwriting?
I recently bought an MPC One and noticed that the +/- and jogwheel buttons sometimes stop working. Sometimes it happens when playing on MPC, and most often in the browse window. It helps to move from one window to another. I wonder if it's a software bug or a hardware fault
Malo when set my start/end points in the sample trim page .. I go to chop / select Manual.. however when I press corresponding pads my unit not giving me chop transient . In manual mode , but region shows chop . My Manual feature not working! Help me plz
hi guys.. quick question.. im new to the mpc scene, and ive been trying this method with these chops and it worked, but as i am done recording and the loop plays, theres no sound coming, does anyone knows why this could be ? when i play the pads there is sound ...
in the edit section if i play the first pad and then the stop button to stop the sample playing don't work. i don't know why but it keeps playing and i have to press the pad 13 to stop it
@@Noman64 hey man, thank you for asking this question and I know how frustrating this is lol you have to double press the stop button quickly to mute any sound coming out of your MPC so try it again but just double press the stop button rapidly. 🫡
@@malobeatsyoo thanks brother for the instant replay hahaha i’m doing beats right know this thing is a Beast but it’s soo complicated! I will try your tip thank you🤙🏻
@@Noman64 dude I know exactly what you mean lol it’s such an awesome machine but so much to learn which is what makes it even better. Be sure to check out some of my playlist here on RUclips where I have couple workflow videos that might be helpful. Also, I have an MPC course that will walk you through from start to finish if you need that extra push mario-s-site-523c.thinkific.com/collections blessings brotha 🫡
@@deejayqueazy8251i don’t like this red ferrari color 😅😢 can you do sampling from your phone in bluetooth ? Like you are listening a cool jazz music on spotify and you say i f ***dam** sample this RIGHT NOW 😂??
Let's say I have a 4 bar sample that I want to leave untouched for the verse, but then chop the sample for the hook. How can I do that without effecting the original sample?
Just make a sequence with the OG sample, then copy your sequence. On the 2nd sequence you can chop it up. I just realized this is a 5 month old comment 😄
![AKAI MPC ONE - How To Chop Samples Like A Pro [Beginner Tutorial]](http://i.ytimg.com/vi/XGkXrJbxE8c/mqdefault.jpg)
Understanding your instrument and having an advanced workflow is an underrated tip for creativity. This is a great upload my friend 😎👍🏼
Thank you so much for the feedback and love. Much blessings to you.
Malo, this content is second to none. Your delivery and explanation to even simple little shortcuts as you flow through is top notch. Thank you!
Hey, do you have no idea how much this means. Thank you so much for taking the time to share this feedback with myself. Nothing but love and blessings to you.
8:12 I actually use the Regions-function in a completely different way in some cases. Which might be interesting to share!
I often use the "Regions" function to change up the types of slices I get from samples. Instead of counting how many counts there are in a sample and then making that many Region-Chops, I'll just make 16/32/64 or 128 regions (depending on how long the sample is) regardless of the count of the original sample. That way I get slices in places where I'd normally never put them manually, often also off the grid of the original sample.
Then I'll make a drum loop that I keep playing and I go look in the Region-Chops for slices that fit nicely together and go nicely with the drum loop. It makes the whole process feel like you're looking for just the right puzzle pieces to make the picture (your beat) show itself.
In most cases you'll still have to edit the start and end points of the chops to get rid of clicks and pops. Or you can adjust the attack and release for the same goal.
It works especially well with long samples that don't have any or have limited percussive elements in the instrumentation.
That's the best & most beautiful part about the MPC is that 10 diff people can use it 10 diff ways. You're comment makes a lot of sense. Cool way to work. Makes for so many more possibilities.
All the unintentional syncopation with that method is soooooo good and puts so much life in beats. Love it.
Very inspiring. Just got a plus today and feeling overwhelmed, your video is encouraging. Thanks!
Hey, thank you so much and congratulations on your one. I actually have a course dropping very soon hopefully within the next month.
Main page Track 01>Transpose set to 1.
Program 001>Warp samples>
Global tab>note on.
Samples tab>pad loop on.
For different drum loops, I include them in the same mute group to alternate back and forth.
Correct, this is exactly what I'm here for. I appreciate you taking a little time in the beginning for the people who have a few questions.. Salute!
Always appreciate your videos. I learn something new every time. Mainly I’ve been doing some stuff the hard way at times. So thank you for basic shortcuts that I was unaware of. I never read the manual. Looking forward to your class.
Thanks for sharing Malo, top notch as always. That beat was 🔥🔥🔥
Glad you enjoyed it, thank you for tuning in and be on the lookout. I’ll be dropping the sample programs tomorrow morning. Much love and blessings to you.
Super excited for the MPC course! Its been sitting on my shelf because I never put in the time to learn it, now I'll have more motivation!
Hey man, thank you so much for the feedback and hopefully you’re able to dust off that MPC and put it to good use. I’ll be updating you as soon as it’s ready to be launched. Also, thank you so much for the feedback and support brother. it really means a lot.
🫡Malo in the building, building a banger
Thank you, had mine a couple of weeks now, this has been the best easy to follow tut so far.👍
Great to see you again! Appreciate your time making these videos
Ooh course sounds good. I’ve only just stumbled on your channel and it’s a blast of pure joy!
Super concise but still realistic about the time it takes to make something dope. I appreciate you and this video!
Im learning! Thanks to you brother Malo
Sitting down to chop my first sample later on today, will have this video beside to guide me through that!
how do you setup recording??? i have output from my audio interface going into my mpc but there's not audio signal on the mpc sampler.
I'm sure you got it by now. For others, its Right above where it says "sample" touch where it says off. It will say " in" and it's ready to sample.
Malo man! The content and delivery is exceptional! I love how you explain how to take a sample being careful to hit the beat. It is so clear WHY!
I also love the video editing style, overlaying the MPC Grid display over the top of you hammering those tasty licks out live!
Inspirational stuff dude!
Yes mate!! Always appreciate the vids.
All the best
Excellent video! very helpfull! many thanks Malo!!
Thank you so much! I love your content, it really helps me out to get into the flow
Amen 🙏 to this and thank you so much for showing up
Malo your a GEM!! 💎
Man This video is dope very informative. Big thanks helped me alot.
I gotta say this video is really great and helpful from the beginning to the end because you teach how to trim using q link which is for me a very simple way of choose the start point and the end point of what you want from the sample, i found the manual chops and the way of erase them when you see yourself committing a mistake a really cool way to not lose hope on your beat i like also the explanation about the region to reduce the number of bars if you feel so.Keep the good work.
Bro this was golden man thanks for this
Bro is great teacher
great tutorial! I feel inspired to hop on my MPC One right now!
Your an absolute savage just elevated my game appreciation chu can’t wait to get home
Much respect, brilliant tutorial!
Intro Beat sick 🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
killin it Malo!
Thanks for the knowledge bro. You have helped me out a lot ❤
This means so much brother thank you for taking the time and sharing this here in the common section. Much love and blessings to you.
Man your videos are really good.
Hi Malobeats!
I’ve been watching a lot of your videos recently and really fell in love with your content.
I’m a DAW-based producer and i dont even own an mpc. But after watching you create beats and having so much fun, im seriously considering getting myself an mpc.
I always thought i can make better music in DAW. I still do. But you taught me that its not always about efficiency or the outcome. If I can have that much fun and joy, MPC will be definitely worth it.
Thank you for sharing your joy
Keep up!
MPC the most fun man. You can still bring your ideas back into your DAW to finish em up
I have the same process as a mpc one user!! You have to have a sense of rhythm when chopping samples..gotta know the groove to move!!
BIG UP MALO!!
I’m definitely enjoying your videos as a beginner
Great content,Did akai give you that mpc ?
Great tutorial. Love the energy too.
Hello. Can you help me? I bought a Akai Volca and 6 months later I cant still understand how to use it. (I use yamaha and boss products previously) ~ Can you slow down the video and show which buttons to use to get the cd/record samples into the Akai machine. Thanks. New Subscriber !! 🏁
Great video! Thanks a bunch!
Hola, Malo. So glad to see you uploading. I have always been inspired by you and have been here since the beginning. I am super excited about the course. Is it going to be on the MPC One? Blessings!
Gr8 video Bruh thanks for sharing
That beats fire
Damn that’s crazy 🫵🏾💯
Es muy Malo! When u pitched it down, that just brought out the "Malo" factor..and the technique u showed about removing the annoying gap.. u should make a short clip about that, because many beat composers have that issue. Thanks for the content, brother.
Nice video 🎉thank u 🎉 I was wondering if u can do a video about ur streaming setup because ur quality is outstanding 🏆 vid and sound 🏆
Thx Broooo. Perfect Tuto ;)
thanks for this video, it was a very usfeul tips with this trim section. And a real pleasure to see you making a beat from this sample. Learning and fun, that's the recipe of your channel. Thanks a lot. I've got a question. will you do a video about the MPC granulator ? It seems we can do manuy things with this, but the manual is a little... light. Thanks again and take care.
Man I just love the „pad3“ trick . It saves so much time😅💁♂️. Your Tutorials are very helpful .🙏
What happend to your live 2 ?
Is it still running ?
🔥🔥🔥 Bro!
Helpful! TY kindly!
I’m a beginner when it comes to chopping just started got into it any
Any advice for beginners?
Great tut, thank you. Somehow your videos doesn't allow saving to watch later! This is a bummer though cuz if there is no time to see when your video is offered. Usually it get lost and never watched. 😞Might want to enable this feature.
I just left this comment on another video of yours not releasing it was an older one, so here it is:
I now have the MPC Key 37 and I'm looking for tutorials since it's my very first MPC product. Would you agree that it's the same exact same product as the MPC One Plus? There's no tutorials out there for the MPC Key 37 and I've noticed that the functionality is almost the same as the MPC One Plus. Thanks.
dope!
Nice video! How did you get that top down shot of the MPC?
SICK
@@masterwise7 Thank you brother
holy fukk, i can't wait to get this joint. Last MPC I owned was a 4000 and that was 10 plus yrs ago
I’m watching several video , after pressing Shift / Convert ..
You use Non Destructive
And Some people Use Pad Parameters
Slices ..
Can you make a video explaining those 2 options
🔥🔥🔥🔥
I have a song where I want to use a couole bars in multiple parts of the song. How do I go about do that as easily as possible? Is there a way to add to the program/banks without overwriting?
I recently bought an MPC One and noticed that the +/- and jogwheel buttons sometimes stop working. Sometimes it happens when playing on MPC, and most often in the browse window. It helps to move from one window to another. I wonder if it's a software bug or a hardware fault
Im waiting for the tutorial vids Bro. I'm going to support you.
is there a setting in manual chop mode i am missing? when i press pad 1 the sample don't start to play so that i can continue to chop up the sample
Malo when set my start/end points in the sample trim page .. I go to chop / select Manual.. however when I press corresponding pads my unit not giving me chop transient . In manual mode , but region shows chop . My Manual feature not working! Help me plz
What does the other machine do
hi guys.. quick question.. im new to the mpc scene, and ive been trying this method with these chops and it worked, but as i am done recording and the loop plays, theres no sound coming, does anyone knows why this could be ? when i play the pads there is sound ...
Hey brother, can you reach out to me via Instagram or email? I would really love to help out with this. IG : MALOBEATS email: malobeats9@gmail.com
We need the course 😭
damn 🔥🔥🔥
in manual chop, you can just hit top right pad instead of pad 1 / pad 2 / pad 3 etc...
Is the work flow on the Live 2 much different?
in the edit section if i play the first pad and then the stop button to stop the sample playing don't work. i don't know why but it keeps playing and i have to press the pad 13 to stop it
@@Noman64 hey man, thank you for asking this question and I know how frustrating this is lol you have to double press the stop button quickly to mute any sound coming out of your MPC so try it again but just double press the stop button rapidly. 🫡
@@malobeatsyoo thanks brother for the instant replay hahaha i’m doing beats right know this thing is a Beast but it’s soo complicated! I will try your tip thank you🤙🏻
@@Noman64 dude I know exactly what you mean lol it’s such an awesome machine but so much to learn which is what makes it even better. Be sure to check out some of my playlist here on RUclips where I have couple workflow videos that might be helpful. Also, I have an MPC course that will walk you through from start to finish if you need that extra push mario-s-site-523c.thinkific.com/collections blessings brotha 🫡
@@malobeatsahahahah bro right now i’m with 3 different pages on the pc with 3 different video of you explaining this machine😂
U a monster
Man everytime i watch your videos i want to grab my MPC One and make a beat.
how to cut sempl so that there are no clicks in akai mpc?
How can I get that sample pack
Is that course out yet?
Yes, it is. The MPC one and the MPC live two Coors is out. Here’s a link where you could check either or mario-s-site-523c.thinkific.com/collections
Thanks for the demo. Why did you buy mpc one + you needed wifi absolutely ?
Because it’s red! Lol. I did the same damn thing. But sold my other and upgraded for very little.
And the WiFi is handy. One less thing to plug in. Mobile. It connects and is just there when you need it.
@@deejayqueazy8251i don’t like this red ferrari color 😅😢 can you do sampling from your phone in bluetooth ?
Like you are listening a cool jazz music on spotify and you say i f ***dam** sample this RIGHT NOW 😂??
Let's say I have a 4 bar sample that I want to leave untouched for the verse, but then chop the sample for the hook. How can I do that without effecting the original sample?
Just make a sequence with the OG sample, then copy your sequence. On the 2nd sequence you can chop it up. I just realized this is a 5 month old comment 😄
I appreciate your help bro I made a beat in 20 min 🙏🏽
MEAN MAN MEAN ! REAL TALK IMGINE B.I.G. OR MAYBE METHOD MAN YOU GOTTA BE ABLE TO RIDE THAT RYTHEM
1:42 this is why you run it controller mode. Much more information and diagrams 😅
Peace
wow
So sick bro…. Let me scratch it up on your beats… Just want that PROMO 🙏🏼🙏🏼🙏🏼
🎉🎉🎉🎉
🎧🧨🤘🏿🎤
"trimming" a sample is also called "truncating" for the unlearned ... carry on
Stop it stop it u killing me and the hatters wow
You got it man I’m impressed. And I’m not easily impressed