can you make a version with only a button and no led? excatly something that with one single button can increment 7 segment display by 1 and when arrive to 9 so start to 0
No sir, there is no any IC that can be used with the 4026 to make up/down counter. 4026 IC is only for Up Counter. But there is another IC that can be used to Up/Down Counter. I'll Upload a video. Please Subscribe to my channel for this type of Information about Electronics and Electrical
hello sir, is it possible to use a switch that can like activate and starts counting and then you can pause it while the other switch is only for reset. i am making a stopwatch and not sure what kind of switch and other components i should use.
![Yailin La Mas Viral, @kreizyk.official - Dale 2 (Remix) [Video Oficial]](http://i.ytimg.com/vi/JaYHBzgqz94/mqdefault.jpg)
My goal : make digital stopwatch with this scemativ
Stopwatch Circuit is already Available in this Channel.
Link - ruclips.net/video/W4fsdvQUJEw/видео.htmlsi=nrjfbbOePdC0N_wc
this is 70s years technology
I know, but it's the basics that never change. 🤗
Thank You 🙏🙏😊😊
how to make 2-digit for displaying 12-hour clock? (0 to 12)
I will upload a video about 12 hour countour
3v denna barida
I can't Understand what you mean 🤔
can u make it count down too?
Yah.
I'll
can you make a version with only a button and no led? excatly something that with one single button can increment 7 segment display by 1 and when arrive to 9 so start to 0
Ok 👍
Hi,
Is there any other IC that can be used with the 4026 to make up/down?
No sir, there is no any IC that can be used with the 4026 to make up/down counter. 4026 IC is only for Up Counter.
But there is another IC that can be used to Up/Down Counter. I'll Upload a video.
Please Subscribe to my channel for this type of Information about Electronics and Electrical
hello sir, is it possible to use a switch that can like activate and starts counting and then you can pause it while the other switch is only for reset. i am making a stopwatch and not sure what kind of switch and other components i should use.
I'll upload a video about Stopwatch.
Can I use LDR instead oof switch with this?
Yes, you can use LDR instead of switch.
Amazing, thank you, great content for my who is learning this myself
Thank You so much 🤗🤗
How to drive decimal point so it turns off on 10??
I think it's not Possible without Microcontroller.
sir, can you show me to make a 4-digit digital counter?
Ok sir ji, I'll upload a video about 4 digit digital counter
@@its015 OK, thank you, sir.. please guide me with the schematic, sir
auto counter 기능이 없는 게 아쉽네.
ruclips.net/video/1aQ0v65Zq6E/видео.html
Auto Counter function.
It is not working
This is not supposed to happen. Please recheck.
@@its015 my ic is 846PR7KE4 cd4026 ic is it the prblm?
@@its015Plz reply fast
@@sreelakshmik6394 CD4026 is Correct IC.
IC pin 16, and 3 goes to VCC
And IC Pin 15, 8 and 2 goes to Ground.
A PullDown Resistor connect to IC pin 1.
Resistor value 10 to 100 Kilo Ohm
not working
what type of problem are you facing 🤔
😅😅😅😅😅well information good show 😅😅😅
Thank You 🙏🙏
mantapp
Very good
Thank you
can u get it to count down, too?
The CD 4026 IC is commonly used as a decimal counter, and it can count only Up Count.
I'll upload a video about Up and Down Counter.
Is there is possible to reset as a downcounter
No
4026 IC is only for UP Counter
can it be done with two 4026?
@@olsihack Yes, Counting from 00 to 99 can be done using two 4026 IC
Thank you very much!
Welcome 🤗