SATA to USB 2.5" 3.5'' External Hard Disk Adapter Drive not working 3.5'' hard drive
HTML-код
- Опубликовано: 21 авг 2024
- As per request from eBay seller: boysgirlsnew-05. I`m posting the requested test to confirm the issue with the product SATA to USB 2.5" 3.5'' External Hard Disk Adapter Drive HDD SSD Lead Converter.
You can find an item that doesn`t work to 3.5" hard drive at the link:
www.ebay.co.uk...
Any suggestion, what could be done wrong, please leave you to comment below:
I purchased EXACTLY the same item on ebay. Arrived today and it worked first time!
I did note that the 12 Volt +ve pin on the adapter has a slightly smaller diameter than a normal 5.5x2.1mm socket. Therefore the 12 Volt +ve pin may not be making connection.
Suggest you make sure you use an male plug that has a 'pinching' connection on the 12 Volt pin - not just a 'sliding' fit as this type may not make proper connection. 🙂
You are genius I'll try it
In Device Manager, under "Disk drives", do you see JMicron Tech SCSI Disk Device?
@@j.d.3269 ?
You need 12V and 5V. Check output for said voltages on connector to hard drive.
Your problem is you don't make a live connection to a hard drive without the risk of frying your hard drive.
Did you use a POWERED USB hub? Direct connection of the adaptor to a computer USB may not be able to supply enough current at 5 Volts.
hard drives typically require a 12V power connection, which is not provided by the USB port that had only 5v
I have one of these ,hooked up my 500gb hsd,and it doesn't find drive the two lights red/blue are lit what am I doing wrong ,or is hdd bad?
the problem is power adapter supply description its said use 12 Volt 2A Power Adapter Supply, AC 100-240V to DC 12 V
wich is not good
i ordered on ebay same USB 3.0 to SATA III Adapter for 2.5 3.5 ssd hdd hard drive
power adapter supply was not included
and i ordered on ebay power adapter supply 12v 2A 50/60 100-240ac like description said use power adapter supply 12v 2A
i conect it to pc wd hard drive 2TB 3.5 inch and damage pc i smelled smoke from pc
computer doesnt work anymore and power supply and SATA III Adapter for 2.5 3.5 broken too but wd hard drive survive and you are very lucky because you power supply didnt work and you didnt fried pc
try use power adapter supply AC 100-240V to DC 12 V 1.5A only Next Time
OMG thank you for your review!!! I also has this adapter with 2Amps power supply, when I plug the adapter to my laptop, the mouse cursor suddenly very hard to move, I think there is something wrong with this adapter, so I disconnect the sata to usb adapter quickly.. thankfully this garbage doesn't fire my laptop
you are very lucky i destroyed motherboard gigabyte z170 gaming 3 with that SATA to USB 2.5" 3.5'' External Hard Disk Adapter
I have one it wont work with my 1tb desktop hdd but it will with my 3 laptop ones
adapter 12v only for SATA connecter, not your HDD
Update
Ide hard derive sata usb kebel
This is wrong man u di it wothout respect steps
Yeah, but first up you need to check the manual each one of them, so that you will know if that is compatible to 2.5 or 3.5, Because you just test them without having known the compatibility LoL…🥴
Maybe you should use it directly to your pc, not using the extension cable ...
No first plug the adapter to sata 3.5 then plug the power .then plug the USB to pc. I just did that today on my 2t hdd 3.5 and worked pretty well lhamdullab