So I watched the whole thing but don’t know exactly how going into diagnostics mode helped. Note I bought mine 2nd hand and got no manual so maybe it was what told me why diagnostic mode was helpful. I never saw any diagnosis in the video. Thank you Appliance Flipper!
can you change the water level on these models? my clothes arent getting all the soap out during rinse on deep fill and two rinse cycles...5 pairs of pants shouldnt overload a machine like this right? thanks
Tried the 3 buttons 3 times and nothing comes up. Also start and pause button doesnt work. But the washer does turn on when i turn the big silver knob. Please help!
Well, what will it tell you if something is wrong any info would be helpful. Will it give diff numbers if something is wrong and what do thy mean if so?
After diagnostic was finished it went back to 0:00 just as you said. If this happens does this mean nothing going on with the machine? I am having a problem with the washer. When the clothes are finished some of them have a stain like marks on them that appears to be lint. Is there a way to clean a lint trap?
Hold the cycle signal button down wait until the 8:88 shows up and then tap the spin speed button the 0: 00 should show and put in diagnostic for there.
Possible bad lid switch. turm washer off and try to power it up again. if that doesn't work unplug it for 5 minutes and plug ot back in and try to power it up.
Once you've done the diagnostic - then what? Mine was pretty silent during 18/19 when yours was making a sound. Does that mean the agitation/spinning is not working? I don't see what the diagnosis actually is right now.
I ran the diagnostic. No error message returned. During washing the 600 sounds like a bearing is out. Does not make this sound when spinning. Thoughts on what this could be?
What's the sound it's making? Usually, if the bearing is bad it'll make kind of a grinding sound when spinning. Diagnostic mode will not tell you if your bearings are bad.
My washer sounds like its washing as soon as i turn on the breaker for it and is giving a f3e2 code and will not let me do anything with bittons or knob any idea
Follow as he explains and do as he shows exactly, no question. Thank you Sir 👍
So I watched the whole thing but don’t know exactly how going into diagnostics mode helped.
Note I bought mine 2nd hand and got no manual so maybe it was what told me why diagnostic mode was helpful.
I never saw any diagnosis in the video. Thank you Appliance Flipper!
Is there a way to bypass the lid lock so I do have to by a new one
I have the same question!
Yes, place a large magnet on where the lid lock would go and it should start with the lid open.
Thank you for this video the way you explained it was simple and easy to understand.
Ty sir
I have a series 600 Kenmore. It will not drain. Whenever it gets in the drain mode drain appears on the panel so I'm assuming the pump is out.
can you change the water level on these models? my clothes arent getting all the soap out during rinse on deep fill and two rinse cycles...5 pairs of pants shouldnt overload a machine like this right? thanks
Choose deep fill
Are you `using the correct detergent? HE?
@@googleuser383deep fill doesn’t seem to work for everyone
I honestly pause it and fill it up myself lol then close and play
Tried the 3 buttons 3 times and nothing comes up. Also start and pause button doesnt work. But the washer does turn on when i turn the big silver knob. Please help!
Wow. That sucks
I’m thinking we are done for. Hope Depot is promoting appliance repair but really this seems like a dead horse more that an appliance
The washer has to be off for it to enter it
Well, what will it tell you if something is wrong any info would be helpful. Will it give diff numbers if something is wrong and what do thy mean if so?
Do you have any on kitchenaid dishwasher?
It did not tell you what was wrong. Mine leaks a little water out the bottom
After diagnostic was finished it went back to 0:00 just as you said. If this happens does this mean nothing going on with the machine? I am having a problem with the washer. When the clothes are finished some of them have a stain like marks on them that appears to be lint. Is there a way to clean a lint trap?
What if it won’t let you complete the buttons for diagnostic mode without flashing and beeping the F5 code???
Hold the cycle signal button down wait until the 8:88 shows up and then tap the spin speed button the 0: 00 should show and put in diagnostic for there.
Is there a video how to fix F5 error?
I have a Kenmore series 700 it started flashing FS and I can’t figure out why it won’t let me do nothing
Possible bad lid switch. turm washer off and try to power it up again. if that doesn't work unplug it for 5 minutes and plug ot back in and try to power it up.
@@applianceflipper8590 I change the Lid switch and it was it. Thank you very much.
Series 600 lid changed pass test but want function
So mine is the exact same one day it just stopped working wont turn on
Got to 18, hasn't moved since.
Im stuck on 18 too
Ditto
please do a video on how to take off lid to replace spring and rods
how do I fix the suspension springs ..my 600s series washer I shaking all over the place violently
Push your washer tub down and let go and see if the tub bounces more then once. There should be vids out there showing how to replace those rods.
Once you've done the diagnostic - then what? Mine was pretty silent during 18/19 when yours was making a sound. Does that mean the agitation/spinning is not working? I don't see what the diagnosis actually is right now.
I hope he follows up on his comments
My machine stopped at 11
I ran the diagnostic. No error message returned. During washing the 600 sounds like a bearing is out. Does not make this sound when spinning. Thoughts on what this could be?
What's the sound it's making? Usually, if the bearing is bad it'll make kind of a grinding sound when spinning. Diagnostic mode will not tell you if your bearings are bad.
What does LF mean
Hi,
My kenmore 600s won’t start?
Why it doesn't kept running
Won't stay on
Mine stuck at 17?
Mines says E2/F6
Mine too. Did you find out what the issue was?
You never showed how you got out of diagnostic mode.
🤪
My washer sounds like its washing as soon as i turn on the breaker for it and is giving a f3e2 code and will not let me do anything with bittons or knob any idea