D7 First Start in 25 years!
HTML-код
- Опубликовано: 27 сен 2024
- Gil Szabo's dad was a heavy duty mechanic and maintained this early D7 very well. Gil says it has been around 25-30 years since the machine ran and all attempts to start the tractor failed because the pony wouldn't fire because of the angle it was parked.
Several months ago I was able to get the pony running with my brother Anthony but the main engine was seized and would stall the pony in low range at full power. After some research I decided to fill the cylinders with a 1:1 mixture of ATF and diesel through the exhaust from the top. It took around 20 liters before the mixture began pouring out of the air cleaner connections. This meant that the cylinders with open valves were full and because oil beginning to pour out of the intake - both intake and exhaust valves were open/overlapping in at least one hole.
After letting it sit for about one week I returned and started the pony and the engine still would not budge and stalled the pony at full speed. After 4 weeks I returned, started the pony and the engine broke free but would not turn over fully with decompressor lever in on, half or run position. I suspected it was hydro-locking because it stopped abruptly. I did not attempt to turn it over again until consulting Chico, heavy duty mechanic and fellow Cat D2 owner. He suggested pulling the injectors, and we built a 1 3/4" deep injector socket but it was not the correct size. We pulled off the valve cover and checked the function of the valve train and decided to loosen off the brass exhaust manifold nuts and drained off the excess diesel and oil. We did the same for the intake manifold at the air cleaner elbow.
We changed the oil in the pony and checked that the fuel rack was free. As soon as the big 4 cylinder engine fired up, the ground began to shake and the engine hood at-top the cage, fell down cutting my hand slightly and bending the camera tripod. We haven't found the serial numbers yet but there is a lot of green pain under the hand painted yellow. Any ideas were to look?
You know she's true old iron when she's got a pony motor! Great job getting this old girl up and running! Nothing is built as good as it was back then so we gotta keep saving this stuff. Thanks for doing your part, and I hope no one was hurt from engine guard falling off at the end!
111
落伍了啦這台車子
怎麼可以發動
😮
That ending was hilarious. That old girl didn’t like getting woke up.
After a reluctant start, the donkey motor had the best work-out of its life! Well done, gentlemen. Many would have loved it and left long since.
What an ending, hope you're not hurt - it looked awesome, quite the reflexes
Thanks. I was fine other than some some skin off my hand. The camera viewfinder was buggered up and tripod leg bent.
@@AxleHildebrand do you still have this D7?
Impressive! But that ending sure was a shock! Wow
Why cat got rid of those pony motors I will never know.They were invaluable to get a diesel running in the arctic.
Crank up the pony, go back in the cook shack for 20 minutes ,have a coffee then come out and engage the pony in low and get things rotating, go back in the cook shack, have a coffee and a donut then come out and fire the old girl up.Two big smoke rings later and you were ready to go!
Very entertaining 👏. Had to watch the ending 30 times couldn't stop laughing. Glad you are okay.
وط.ث
In the excitement Safety always gets over looked... but hey seems you survived and uploaded great video.. hope your dignity is still intact.. But I bet you will never forget to secure loose items again...
The most favourite machine I have ever run was a 1968 D-7E. Thank God the pony had an electric start but that machine was a beast. You could haul it down so low you could count the cylinders popping off but it would just keep pushing. It had a leaky final drive that we put a special brew of 80-90 gear oil with a tube of grease mixed in to slow down the leaking.
I totally agree. Adding grease to slow an oil leak is a heck of a lot better than running low on oil.
This was really awesome!
I grew up in rural upstate New York close to the Canadian border, this made me miss my Canadian friends from the great white North!
Beauty day, eh?!
When they get the good fuel , eh. Hope that didn't hurt too much. You'll rember to put panel where it can't fall on you next time. Good work.
Good bonnet flying .classic so luv the health an safety .it's what fun .all about .the camera still Peking through exhaust hole 😂
You turned your fuel on to soon. You need to give the starting engine time enough to warm the big engine. At least you didn't load it up with starting fluid.
Beat me too it
I found a D8 up in the gold fields; also, there is a army truck for sale here! 8000 almost complete
Didn't know that the D7's had pony motors,thought only the D8's and D9's had them. Learn something new everyday.
I know of a 1947 D4 with a pony motor. I would think other D’s of the era had them also.
Should have known about that. My bad.
D2s had them
Wow, what an action packed ending.
I have never owned a 3T but i owned a D 7D 17A and i now own a D 7 C 17A made in 1956
The serial number is stamped into the rear of the cat on the very back plate where the winch would go. looks to be a 3T or very early 17A. I think I may have a shop manual
Keep the good work up!! 👏
Loved the mornings when the tracks were frozen and the crank handle kicked back and slammed your hand against the roll bar lol 😂 learned a whole new language
Crazy mechanics!
That was real!
The very end was awesome
It was moment back in my cheerleading co-ed stunting with fliers. I just automatically went to save whatever was falling from above.
Cat’s made good dozers I use get very frustrated starting them in my youth , don’t want anything to do these anymore now I put in the key start the machine and go to work case closed .
Hope everyone is okay!
Sounds like you got the starting transmission and low need to put it in high to turn the motor or fast enough
I don't care what anyone says no computer = no problems not easily fixed that old cat will still run 50 years from now just keep engine from getting water in it and your good
I was in my shorts one summer starting dads the magneto shorted out thru the tracks a shot of extreme electricity shot from my nuts out my ass it blew off my loggers hard had I was electro man for some time.and it was worse than getting hit by lightning years before.my dad couldn't stop laughing rip pops
I'll bet that hurt!!
Hence the term "Blow it out your ass!"
Great expertise
😂😂😂😂KKKK MANEIRO, GISTEI DO FINAL DO VIDEO, ME RESPONDE SE SOBREVIVEU KKKKK
Crazy they used those little gas pony motors to crank those old diesels
Could've ended badly. Glad it didn't.
A little heavy oil in each spark plug hole, take the battle out of it when starting pony.
I hope that guy did not get hurt. I don`t know if that is a 3T.
Got away lucky! 😀
My dad ran these things in s Texas when he was in his teens. I'm 50. Won a bet because I knew how to start a pony engine cat a few years ago...
I hope that guy wasn't hurt.
Hi folks , made for great viewing 👌 well done she runs thanks for sharing 👍
14:42 did you hear someone shout “incoming”🤣🤕
The final!! 😲😲😲😲😲😲😲😲😲
A shot of ether early on would have started it 15 minutes earlier, When the pony motor is running and not not turning the diesel engine no coolant is going through the pony engine and it will get very hot very fast the Diesel engines water pump supplies the coolant to the pony motor
I'm not so sure that's a D7. Looks small. Anyone??
great ending
I think you did everything right...
Except for the lose hood
Did he get hurt
3 other ihc Dozers td 14 A and a td 18 along with my dads D4 7 u
Give u lads some tip get ur gob on pony fuel tank blow into it ule see fuel piss into carb
Wouldn’t it be easier to just shovel the dirt by hand
how is the headache?
Wow that was messy
the younger guy doesn't know what going on.
do have starters for those pony engines
Some yes. This WWII example does not have a charging system or electric pony starter.
@@AxleHildebrand so the whole thing is just magneto
Yes, pony electrical consists of only a magneto. There are no lights or electric accessories on this model dozer.
Yes l bought one, cost me four hundred bucks, worth it.
No mechanics injured in filming this video?
...the ending = SpongeBob and Patrick fix a D7... 😁
Doesn't look like its been sat 25 days let alone years
Y'all don't know what starting fluid is
Seriously!! It's a minute to a minute and a half starting procedure!!! You went way too long!!😳😳😳
Did you drain all the diesel? I have a d6 with 20 yr old diesel in it... I was thinking about trying to run it with the old diesel.
It'll be fine, make sure there's no water in the fuel tank and filters and run it.
The old timer left the fuel tank full to the top which kept the tank looking pristine inside.
WATCH THE GUY IN BLACK HOW HE HOLDS HIS MOUTH LOL IF HE ISNT ON METHAMPHETAMINE I DONT KNOW WHO IS.
I'm glad someone else noticed
I am 100% drug free and pausing in excitement. :)
its runs but almost kill him
😎 get back to the shop and paint it and clean it up 300000
Throw some ether in there that'll work
HAHAHA he woke a mad CAT...hope you did not get hurt by the hood ...but to tell you i like to have spit a mouth full of tea all over my laptop
👍
Wot a disorganized lot!
A very primitive poor design for starting large ci diesel motors,The IH gas start diesels were way superior in cold weather.Can you imagine having to do this every freezing morning in the 50's in the High Sierras?
да это наши после будуна не понимают что делать
Guy in black doesnt know what hes doing it seems. End tumble waiting to happen. Its a wondet the pony put up eith ot
Why are there numerous expensive machines on RUclips which seem to be lying unused for 20, 30, 40 years waiting for a start. Bs
Hey Mad Farmer, yeah there's a lot of b.s. out there when it comes to modern equipment and what to do with potentially good old machines. This D7 was destined to the metal recycle yard a long time ago but was immune due to its remote location. It was not worth scrapping due to high recovery and hauling costs associated with the fact it was a dead crawler machine. As a matter of fact, the fellow who informed me of this D7's location is a metal recycler himself and despite efforts, he was unable to get it running to track down the mountain and haul away. Most the iron I hoard isn't expensive or viable on a modern jobsite because lack of modern safety equipment and the EPA environmentalists. Too many pesky leaks and some factory drains that literally flow onto the ground.
Great ending. Hope your healthcare insurance is paid up.
That is not a d7. All y'all did was push the air through the fuel system an electric starter could not have taken that👆
😲👍🤣
Fuck!!! What happen?
Greeting from a German Engineer living in China
The 1945 Caterpillar diesel D7 tractor serial number 3T2707 was parked on a slight grade for decades. Once the massive 13.6 litre 4 cylinder D8800 engine fired up it caused the engine bonnet to slide across the top and crash down nearly injuring me and damaging my tripod and camera in the process.
Man cranking doesn't know to crank nor does the one telling him lucky it doesn't kick back break his arm yea cranks better with fuel would not either around my old cats,was the throttle open or closed or no fuel
try spending some money on a battery
No electric start on this old war tractor.
😄😄😄😄😄
Can't read them gages. No one can understand what they said
There's nothing to read, it ain't rocket science. Three zones on the oil and fuel pressure gauges, red, white, and green. Green is good, red is bad - shut it off if you see red.
Что-то долго в этот сотовский двигатель заводили надо было солярочку-то прокачать клапана на аппаратуре открыть воздух сбросить этот движок вообще хорошо заводится Нахрена вы капот-то на крышу положили горе Трактористы
Александр Коханов... если бы мотор быстро завёлся, то и видео бы закончилось.
For those pony motors sure are pieces of crap what a horrible way to build an engine he is some total crappy built little motor to try and get your other engine to start.... And all that blues smoke boy that motor was burning more oil than anything I've ever seen and actually running that's the crazy part about it....the pony motor was so wore out that it made the other motor look good and it was putting out black smoke.
Worn out and still making me money, best friend l ever had
Loved the "snow tracks" too
Why ? ? ? It's a wore out, rusted, broke down, useless hunk of junk that almost broke your head at the end of the video......
I enjoy preserving old military machines and remembering those who fought for our freedom. That is why.
The ending of your vid was a really unexpected twist , reflexes of cat Brilliant
Most intense old start cold start I've seen!
I got killed , almost . . Hilarious 😆
это похоже русские трактористы бежавшие от мобилизации
Paint is good for sitting for 20years
Point the camera at the stack please 😊
Sorry but could you get a little more organized. Oh my goodness you act like you haven’t been around engines before. It was like watching larual and hardy
The ones that cranked through the side would cut your fingers off if it kicked back and your hand was wrapped around the crank. It could take fingers of if it hit a cleat or damn sure smash your fingers if it hit in between cleats
Interesting start up all you need is providing you have fuel flow at injectors is to bring oil pressure up on half compression and then open it to full compression and it should start so simple. It will not start until oil pressure comes up and throttle is opened😁😁😁😁😁😁😁😁😁👍👍👍👍👍👍👍👍👍👍👍 I noticed your mate finally opened the throttle and it fired. 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣 good job its a learning experience
The sky is falling!! The sky is falling!!!
Wow what an ending is he ok?
😁👍
😔😪