(Timelapse) Beautiful 4-Stroke Engine Rebuild + 1st Start!
HTML-код
- Опубликовано: 8 янв 2020
- I am beyond stoked with the results of this engine build, considering it was my 1st 4-stroke engine rebuild ever! Only other engine I have built was my 2003 CR250 which was extremely basic compared to this.
This 2014 YZ450f actually had 205 hours on the ecu! (TokyoMods sent me the total hours on the ecu when they remapped it) But it got all new hot rods engine bearings, cometic oil seals and lower gaskets, hot rods crank, new 4th gear, boyesen water pump, wiseco clutch basket, tusk clutch plates, je piston std. comp, kibblewhite stainless steel valves and spring kit, oem top end gaskets, oem spark plug, new cam chain + tensioner, and ecu remap from TokyoMods for supermoto. So yeh, it runs GOOOOD hahah can't wait to finish the break in. AND WATCH TO THE END FOR THE 1ST START!
Let's make this video go viral! Share it with someone who like motors! Thanks as always fam! This bike is nearly done now! Finishing it up this month I hope.
Tools:
Mag wheel cleaner amzn.to/2sYRD0c
Scotch brite pads amzn.to/2QApLs7
Dewalt impact gun amzn.to/2N6869y
Tusk case splitter amzn.to/2tGBL2m
Tusk circlip pliers amzn.to/2tFrbZC
Air impact gun amzn.to/35CQV6a
Build Sponsors:
JAX Moto
jax.mx/
/ jaxmotoshop
Toxic Moto
toxicmotoracing.com/shop/
/ toxicmoto
TokyoMods
tokyomods.com/
Camera: Canon 80D amzn.to/2E0vmS0
Mic: Shure VP83 amzn.to/2W14onk
Editing: Adobe Premiere Pro amzn.to/2Vs5qJI
Music: "Wavy" (Non-Copyrighted Trap/Instrumental Rap Beat)
• "Wavy" (Non-Copyrighte...
hip hop rap beat instrumental 01 2020
• hip hop rap beat instr...
latin hip hop oldschool beat instrumental 10
• latin hip hop oldschoo...
OZSOUND - FREE MYSTICAL TRAP BEAT | No Copyright Trap
• OZSOUND - FREE MYSTICA...
[No Copyright Music] Retro 80's Funky Jazz-Hop Instrumental (Copyright Free) Music - Sundance Remix
• Video
DRUMKEYZ - NBA YOUNGBOY TYPE BEAT | No Copyright Trap
• DRUMKEYZ - NBA YOUNGBO...
Underground Stars - Loxbeats [Vlog No Copyright Music]
• Underground Stars - Lo...
Damn, I never realized how complex 4 strokes are. Awesome video btw
Yeah there is a lot more to them compared to the 2 strokes but at the same time so much is similar. Thanks so much I appreciate the comment!
You are the first person I have seen install the shift drum the easy way. I see people struggling to hold all the stuff and try to put it all in at once. You appear to have great skill. Cool video too! Thanks for sharing.
SubUrban Cowboy thank you! This is my second engine rebuild so I still have lots to learn but I have a good idea what I’m doing now 👍🏼 glad you enjoyed this
Damn, when this thing is driving on the road. And damn those decals, real fresh
Moto 0fficial it will be a head turner for sure... thank you man 👍🏼
dude Ive been building bikes for over 20 years (also former jet engine mechanic) and I have to say you did awesome for your first time with a 4 stroke, very clean and thorough, at first I was why isn't he changing the bearings, is it a money thing? and I continued to watch. great job, hats off and I wish you future success
also, constructive advice for any future build that you would strictly use for racing- replace steel bearings with all ceramic bearings, REM Isotropic your transmission gears, highlift longer duration camshaft, oversized valves while opening up your valve seat chamber to at least 70% of your valve head diameter, this should give you a wicked flow. And of course bore and stroke optional, depending on class rules should you race...smiles and have fun with your new recent rebuild :)
Wow I just want to say thanks first of all! I really appreciate the comments and the advice! I don’t build these super motos for strictly racing just for messing around and looking cool haha but I will be doing some more extensive engine work on my next build! Definitely want to get my trans gears coated by trick eng.
Awesome work bro! 🙌 Can't wait to see the finished product 😍
HadrienATF thanks fam! Weeks away 💪🏻
And she sounds absolutely amazing!!!
Ulises Glez im in love 😍 it sounds perfect
26:36 when he pulls that dick move and somehow it made the cut. sounds the way a dog looks when he/she sticks head out window at 80mph.
Great build brother. Love your channel hope to see it grow.
MIXON4PRESIDENT thanks a lot I appreciate it! 🙌🏼
this is beautiful, you've got so much effort for this, keep it up dude
Thank you so much! Appreciate the comment
That thing is sick!!
thanks a lot man! Going to finish it up and reveal it soon!
from Philippines here :)
thanks for interesting videos
Hey thanks man! Welcome 👍🏼
Duuuuuuuuuuuuude! Keeps getting better and better 👍
Jourdon Gulick thanks a lot brotha! It’s running great so now it’s the home stretch
despues de meses, ya mero terminas de restaurarla, haz hecho una super inversion pero nadie te quitara lo feliz saludos desde campeche men ✌️ chingona tu moto💪
muchas gracias amigo! Estoy muy muy contento con la moto!
Awesum time lapse ..great editing..
diesel thank you sir!! 🙏🏻
Color combo looks👌👌
Brad thanks man!
Damn!! the carbon fmf looks sick
Max Früh nice cherry on top! 🍒
Great work and dope video🤙🏻
Thanks a lot I appreciate it!
12:45 you should also get the other gear and change them as a pair because the new gear is going to wear quickly into the pattern of its mating (old) gear.
Angelus Reprobi ok thats good info I didn’t think about that 👍🏼 now I know for next time
Late to the party but my god the bike is looking saaaaweet 👌 unreal work dude fair play.
Tomatoknuckles nah you are just in time! Haha thanks a lot I appreciate it, it’s been a TON of work to get here. Stay tuned for the final reveal 👍🏼
@@FULLTHROTTLEFILMZ From the sneak peek at the graphics it's gonna look unreal when it's done look forward to seeing it.🤙
Cool video.
Brooo, almost at 30k!!! Keep up the amazing work 🤟🏻
Ulises Glez yeah man! Going to hit 29k today!! Thank you I’m grinding to 100 💪🏻
You're already at 29k mike!! Let's get to 100k this year 🤙🏻
Ulises Glez seriously is my goal to finish 2020 with 100k 🙌🏼 we can do it!!
@@FULLTHROTTLEFILMZ yes sir!!!
That is a BIG piston
450!
Éxitos! 🙌🏻
Gracias bro!
that was awesome,
catur skak thank you!
nice video
thank you uploading
얏하롱 thank you 🙏🏻
Relaxing video
MsBogdos thanks a lot 👍🏼
excelente,,,felicitaciones
I can literally SMELL that Kevlar burning
TA BMX haha 😆
ahhh thats what it was
Nice job dude this is Good dude ... Awesome 🤘😎🇫🇷
Bonjour c'est moi JACKIE!! Thanks again bro! Appreciate it 😎 👍🏼
@@FULLTHROTTLEFILMZ you are welcome dude !🤘🤘🇫🇷🤘
Amazing ❤❤
Djawed Gaming thank you!
Very nice and clean..😃😃
Super Flanker97 thanks! 🙏🏻
@@FULLTHROTTLEFILMZ your welcome👍
This was just pretty 🥰🥰
Haha thanks Gnag! Hope you heard that first start too! Engine is sounding smooth
FULL THROTTLE FILMZ Yeah, got a total flashback to when i started the brc for the first time 😂 you low key want it to start on the first kick 😜 but you end up kicking alot, but when it finally fires you get all hyped again🥰
gnagsaar moto 100% bro!
OK man this was ao totally freaking awesome! I'm hyping myself up to do an engine rebuild on my 2011 yz450f so this was good information and motivation. A few questions if you ANYONE READING THIS WOULD BE WILLING TO HELP OUT- what specialty tools are absolutely essential? What was that steam looking stuff coming from the engine at the end (I'm assuming its normal since nobody seemed concerned but idk what its from)? What do you wish you would've known earlier/done differently? How difficult is it to time the engine? What was the most difficult part? should I have a ft/lb or an inch/lb torque wrench? removal/installation tips? Any other tips or tricks you would be willing to share would be greatly appreciated. Also what would be the CHEAPEST way to go about rebuilding? (brands, budget websites, full engine kits, etc...)
I really wondered why you trusted that old crank. Beauty build
Yeah I was trying to save money but it was clear that the crank was not going to work! Runs like a champ now!
@@FULLTHROTTLEFILMZ i just ordered my full rabbit kit for my 09 rmz450. I like alot of the work you did here. Great video and build! Brap brap
Very nice flywheel puller 😝🤣🤣🤣
Yeahhh... about that 😂 not proud but it came off
Buen video!
Alonso V.A gracias! 👍🏼
That thing is suhweetness!
Wee Man thanks a lot! She’s a beaut
nice, ilove it
Linh Tuan thank you 👍🏼
a lot of amateur with bad memory like me has been lost in the jungle of ton tiny complicated 4 stroke parts until a guy called mechanic found us and say "jeez, google parts catalog dude".
You sure loves his red Locktight
Loctite, assembly lube, grease. Love it all my man
The stuff he pour onto the gears probably isn’t red loctite.
хорошие у вас съемники
This is awesome video and you did 💯 percent rebuild and love that colour and wish you can do some on yamaha raptor 250 engines that be awesome to see them in future
Thanks a lot I appreciate it! The raptor engine would be a walk in the park after this complicated 450 race motor!
@@FULLTHROTTLEFILMZ I would love to get yfz 450 and I would put raptor 250 plastic to put on then be my dream quad to ride everyday lols
Wow are you mechanick or just bike lover who kearn how to maintain his bike and rebuild the engine? Impresive! I bet if i do this job there will be a lot of extra parts and bolts lol 😊
Ivan Nisotovski self taught from youtube vids, service manuals, and the internet 👍🏼 about 3 years working on bikes. This wad the 2nd engine I’ve ever built actually. Thanks man. Trust me it isn’t too hard to learn
fucking awesome dude 🔥🔥
Good work 💪
Blood Hound thank you so much!
@@FULLTHROTTLEFILMZ no problem man! found your channel about a week ago and i watched the honda supermoto build playlist in one session. 🔥 And now the yzf playlist. I am a little addicted 😂👌 but your channel is sick af 💪🔥
Blood Hound thats so awesome man! Really stoked to hear that and I appreciate it!!
👍👍👍👍
Awesomee 👌👌😎😎🇮🇩
HERMAN AJE thank you! 👍🏼 🙏🏻
@@FULLTHROTTLEFILMZ 🙏🙏🙏
SUPERMOTO SUPER
Nice build but chipped my engine case trying to pry off flywheel like you guys. Flywheel puller from now on
I thought I mentioned in the video not to do this! Sorry about that man. Yes I only use a flywheel puller now.
1:43 Am I the only one who see a biker with half-moon sunglasses, turns his face to the right, with his right hand's up, and he's riding something looks like a toy locomotive?
Que buen video gracias por compartirlo.....para que se amarro la cadenilla si se desarmo todo el motor
Alejandro Grisales gracias y no se 😂 tienes razón
Es de los vodeos mas hermosos e inpecables que he visto
Alejandro Grisales muchísimas gracias amigo 🙏🏻
Hi
I did not hone my cylinder because I do not have the tool and just put new piston kit on it. Replaced all the valve seals also. Noticed a thin blue smoke when I rev high the bike after rebuild and after spending 2 hours on it. Im thinking that is because the cylinder was not honed.. Can I still hone the cylider and put it back togher even I've already riden the motor after few hours?
Its a amazing I just enjoyed watching this work so much! Did u study engines somwhere or did u just try once to rebuild it? And how did u remeber where all those parts come back again? Thanks for answer
Greetings from Czech
Thanks a lot! I built a 250 2 stroke engine before this that is all the experience I had. I took videos and pics of the disassembly which helps to remember later also parts diagrams and service manual tells you.
@@FULLTHROTTLEFILMZ
Oh thanks for answer
Dude you are getting really good at this! So did you end up keeping your CRF450? I saw awhile ago that you were gonna sell it.
Hey man thanks a lot i really appreciate that. I did thankfully keep my 450. Shes here to stay now!
@@FULLTHROTTLEFILMZ Nice. Glad you were able to keep it. I’ve already told you a million times that I have a 2017. Have you done the top end on yours? Mine has 170 hours on a full stock motor. Only reason I haven’t torn it apart is because it runs great and I ride so much.
Need help! I'm building this same engine, noticed at 8:00 you showed a ball bearing, when I separated my cases I found the same thing but it wasn't from any bearings. Does that just free float in the oil pickup area ?? Any help is appreciated
This built its sick,,, nice job.. i just pick up a 99 yz400f can i follow this process to build mine i see a lot similarities i am a diesel mechanic never work on bikes before. Any tips
Thanks a lot. These motorcycles are not that complicated and there is enough info out there to help you do just about any job. I learned how to do all this on my own over the past few years so I'm sure you can do it too. My YZ rebuild videos should help out too good luck man
Thanks for the reply, question when you are putting all gears back i only saw you point at two gears that are dotted, does any other gear are align or just go back in, and do you need the crankshaft at tdc to line up does two gears that are dotted. Thanks again
Nice man. How’d you learn to do this? I’m trying to learn myself
RUclips videos, service manuals, and just going for it!
pedazo cancion ....chapo
hey man is that a normal brush or a wire brush you are using at 18:40?
Paan Farkhan its a metal wire brush
Did you change to steel valves over the TI?
barkus921 yes I went from stock titanium to kibblewhite stainless steel valves and valve springs
One question, how the heck do you remember how to put all this stuff together again? Have allways wondered when watching these kinds of videos...
Maikel Nait well first off, I recorded everything so i look back at the videos for reference, then i use parts diagrams from a service manual and online, i try to keep everything organized into bags and labeled also 👍🏼
@@FULLTHROTTLEFILMZ That makes sense 😊Definitely an inspiration, well done 👍💪
Are case splitters universal to most mx engines
Yes! these ones will split most 125-500 cc engines
you were visited by polishing police, the crankcase is not shiny. this time we’ll get around a warning, but be careful next time.
ласосни тунца hahaha yeh I know, i wish i could have gotten them vapor blasted but we dont have that here in Mexico. I got u next time 👍🏼
Doesnt seem to have much compression? on my 250sxf i can stand on the kickstarter with my whole weight (85KG)
Maybe it’s seized..or you need to eat more..
I guarantee that this 450 has more compression that ur 250. This engine is all good 💪🏻
@@FULLTHROTTLEFILMZ alright no worries, when you kicked it didnt seem to resist at all
25:14 El tipo esta hablando español mmmm
You didn’t do anything to the broken cases?
Rebuilt the motor with the broken cases and sent it. Bike is still going strong now over 30 hrs on it maybe more
Yo estaba arreglando una 450 pero no jalo 😢😢
Carlos Munguia lo siento bro... no es fácil
How do you keep track of where everything goes
Videos i filmed, other RUclips videos, parts diagrams, service manuals
@@FULLTHROTTLEFILMZ I meant everything you take off lol. Lots of bolts different sizes etc... Great video tho
want to have a motorcycle like that at a cheap price or not
Falto los discos de clucth
no los cambie bro
no new bearings? :(
jeliman13 all new engine bearings were installed 👍🏼 i split the cases again to change them all out and a new crank. I wanted to reuse the old crank but it didn’t work so then I changed the bearings since i had time
Tailacos
how many hours the bike has before the rebuilt?
205 on engine and frame
@@FULLTHROTTLEFILMZ thats mean piston,valves , and connecting rod ? i have an 2016 450sxf ktm with 23 hours from 0km i use it for cross .. and i do changues of oils every 8 hours when i should changue piston , valves or connecting rod? thx for answer !
23 hours don’t touch your motor! Haha kee doing those oil changes and if you don’t race the bike maybe change the piston at 80-100 hrs and check the valves at 30-50 hrs maybe a small adjustment. Crank should be good for 100-150 hrs or two pistons
Thx that help me a lot!!!!!! Nice tips
And the smoke?
Gibbon Photo it’s the exhaust wrap burning off oils.
Are you not familiar with Cameron Niemela? your way of speaking is very similar ... every video of you I see I ask myself the same question
1234 v well of course I am a big fan of his!
17:34 are you sure?
19:28
🚀Hello Bro!)
Hey man! Enjoy!
@@FULLTHROTTLEFILMZ Спасибо!) Крутые у тебя видео. Всегда жду!
you kinda lost me when the flywheel fell on the ground
Greek-Lover ✌🏼 later gay-lover
@@FULLTHROTTLEFILMZ that wasnt said to offend you mate , everything else was amazing and i really enjoyed the video ...
Greek-Lover sorry man I just get enough bs that I got low patience. Thank you, I’m working on letting comments go but i work very hard and sometimes they get to me. Plus i literally said that this is not the eight way to remove a flywheel but i live in a foreign country and do what i can to make things work.
@@FULLTHROTTLEFILMZ just be careful with these things next time , you are in luck its all good ! The slighest bend in the rotor can eat up your stator
Greek-Lover oh trust me i learned that on one of my crf450s i had a slight crank bend and it shredded the stator. But if u watch this video i ended up replacing the crank because it was out of spec from that hit. As you said
Am I finally first ? 😂💪🏻
Yes..you got the holeshot as well...
bruhhhhh SOME GUY SOLD ME A BIKE THAT OVER HEATS AND thats the same bike im tryna rebuld but 2015 CCLUTCHHHHHHHHH
Heck yeh good luck with the rebuild man I have more detailed vids on that engine. I recommend the boyeson supercooler it really keep the engine cooler
Estabas metiendo el piston en el cilindro a presión y sin aceite🤦♂️🤷♂️
Xisquito 21 yo puse aceite in el cilindro y el pistón... No estabas poniendo atención
Spider man???????????
Hey do you do work for a buisnuess if so can you shoot me an email I have an engine that needs rebuld
Sorry I do not have a business and cannot do rebuilds for others at the moment.
Miller ATV and cycle does probably the most engine rebuilds in the USA i would send it in to them
20 min time lapse 🧐🤔nope. Can't take the rave music. Stick around. Yeah IAM audi 6000
Spend 15 bucks for a flywheel puller
100% 🤦🏼♂️ I learned my lesson