my only issue is that my wheel deck side pillars arent that tall, the height that my wheelbase is mounted at is literally at the very top, they're only 58cm heights, so I guess, Could I just lay the angled profile on the pillar, or get a spare bracket and screw it on the side lower down?
You could definitely do that or even just put the profile on the side of the pillar rather than on the front of it, and then just attach the boxes at more of an offset to the left to make up for the extra distance from your hands!
Great view Alex, really insightful and helpful. Just need video how to make the passage floor and attached the window nets etc. Keep up the great work!!
@@Simlife101 yeah not sure what you’re talking about man but I definitely wouldn’t delete a message especially if it was helping someone out, are you sure it’s not an issue on your end? RUclips hasn’t censored any of your comments either so I got no idea 🤷♀️
Thanks for watching! Yes I made the passenger side it was really simple, those nets I’m using at the moment are custom made; but I was using nets I made myself before that. I will make how to videos for both of these in the future 👍
Yeah as you can clearly see in this video on the boxes 😂 to be fair though all you need is one of those lint rollers like I used in the video and it’s really easy to keep it clean, it’s just a daily process is all
@@secret_one nah you can only notice it up close so in videos etc it never shows, I also have carbon fibre wrap which doesn’t attract dust but gives a bit of a shine on camera.
I have plan do something like this but left side my rig, contain is, Racelogic display, Evil Rank Driver display and / or Streamdeck and / or Button box like your set.
Thanks for video. I am now step of building these to my rig and luckily i have big cardboard box of my electric mountain bike what i was going to throw away but i think i use it for material for rig :)
A 2X2 or 2X4 would be a lot cheaper but you would have to be able to cut the right sizes and angles. Also relatively easy to move things around, just screw in to a different spot and maybe drill a hole, but not move multiple times.
No problem man, I’ve been so busy with LMU stuff that I haven’t been able to make a guide video on it. It’s just a piece of diamond plate from hardware store that I put 2 holes in and then bolted it to a piece of aluminium profile. Then attached to the rig
Hey bro I like it a lot however the foam inside handgrips is about thin, I would have preferred the wheel with rubber grips instead. The one I am using is called Simedal X-GT
Top notch, Alex! I really dig the simplest of diy projects the most! 💪 But… is it fire proof?! 😂 I’ll rework my interior next year so I’m thankful for any input regarding this topic! Have a good week! 👋
Well there’s a fire extinguisher but it’s empty so if rig catches fire I am done for 😂 look I would say it’s fine as I’ve used the rig a fair bit this past year and I’ve never had any issues, just keep it clean of dust etc you don’t want too much build up. The way I wrapped my button boxes is not ideal as it was my first time back then, I’ll have to redo them. Apart from that the rig is very easy to keep clean of dust etc.
Good question and thanks for watching. 1. If you try to match that top right hole up with the corner bracket then it will limit the lateral (lift-right) customisation as the channel for that hole is very small. 2. To be honest another way you could do it is place a corner bracket at the top and bottom of the bar. Then put the boxes on the bar and then push them firmly together with the corner brackets and then tighten (kind of like a vice) and then that would also be a good way to do it.
They are done with aluminium profile at the back of the rig, you can see how we built it here: ruclips.net/video/LsG2gjbgFKo/видео.htmlsi=eZjlNLVdO7PTDDcJ
Moooola! Cooool! 😎😎 but my problem is I have a Shifter sequential, a Handbrake and a shifter H... and I have no space for a buttonbox like yours... I have put it behind all these stuff in vertical position, and its difficult to access to it 😅... I would post a pic to show you but I dont know how. (sorry my englissshhhh)
Yeah I know is some people have this problem! You can maybe get some extra piece of profile and still have it vertically but make it closer to you! You can do anything with aluminium profile!
@@alexkayracing the sequential shifter and handbrake are a distance perfect for me.... if I brought them closer to me, it wouldn't be comfortable or realistic.
@@Dani_Jari sorry I meant you could put a small piece of profile sticking out so that you can attach the button box to that vertically to make it closer to you, it’s probably easier to show you 😂
I want to do something like this with the button boxes on the right-hand side and a shifter on the left as I'm from the UK, does anyone have any ideas on how i could do this
I like mine to look clean and neat at all times i guess your application is for videos. Also it maybe cheap for materials but in total with button boxes you need my console cost a minimum of £400 to build with button boxes
You can make your own boxes cheaper, the whole point is you can save quite a lot doing it this way as opposed to using wood and building a structure. My setup is clean most of the time but it can gather dust pretty quickly. Only thing for my boxes is because they were my first ones I wrapped I didn’t know how to wrap them properly, in the future when I decide to re-wrap them I know how to make it look clean and smooth; for now there’s no need because you can’t see any of that in videos, only up close.
I think now it’s getting close to where VR is almost an always viable solution. I remember when I started simracing it was in VR, and even with an RTX 3080 at the time that GPU still wasn’t enough to get a decent frame rate without lowering the graphics and reducing the experience. But now I think thinks are getting pretty close especially with this quest 3 headset
Leave any questions in the comments and I’ll get back to you! Thanks for watching 🔥
So helpful, I'm setting up my triples next week and been planning to make one of these, this is gonna be something to rewatch in a few weeks!
my only issue is that my wheel deck side pillars arent that tall, the height that my wheelbase is mounted at is literally at the very top, they're only 58cm heights, so I guess, Could I just lay the angled profile on the pillar, or get a spare bracket and screw it on the side lower down?
You could definitely do that or even just put the profile on the side of the pillar rather than on the front of it, and then just attach the boxes at more of an offset to the left to make up for the extra distance from your hands!
you are a master in applying alcantara
Not really haha, I got better at it as time went on after this project though
@@alexkayracing :)
Wow this will be very helpful!!!
🙏
Great video love tutorials like this! Would love to see a video on how you attach your racing nets
Can definitely do that! I actually made my first nets my self so that might be a good one 🤔
Wow! This is very well made, i like it! Instructions is very useful.
Thank you for watching my friend! Hopefully the video helps you 🙏
Un lavoro magnifico amico mio!!! Congratulazioni!!!!!
🙏
Great view Alex, really insightful and helpful. Just need video how to make the passage floor and attached the window nets etc. Keep up the great work!!
Thanks for watching mate and yes I will get that one done some time in the future!
@@alexkayracingwhy are you deleting my messages don't think I saw that
@@Simlife101 sorry man I’m not deleting any messages? I’ve replied to all of your comments here I’m pretty sure…
@@alexkayracingmate I know you did. 3 times. I use delete detector which tells me the Owner of the channel deleted your message.
@@Simlife101 yeah not sure what you’re talking about man but I definitely wouldn’t delete a message especially if it was helping someone out, are you sure it’s not an issue on your end? RUclips hasn’t censored any of your comments either so I got no idea 🤷♀️
excellent instruction Alex, well explained !!
Thanks for watching mate!🙏
Great video well done. How did you make the passenger side and did you make the safety nets?
Thanks for watching! Yes I made the passenger side it was really simple, those nets I’m using at the moment are custom made; but I was using nets I made myself before that.
I will make how to videos for both of these in the future 👍
I like the concept and the execution but, no way would I cover things in Alcantera as it is obiously a dust and hair magnet.
Yeah as you can clearly see in this video on the boxes 😂 to be fair though all you need is one of those lint rollers like I used in the video and it’s really easy to keep it clean, it’s just a daily process is all
@@alexkayracing Only noticed the "fluff" when you was showing us how. When you was driving it did not notice unless you cleaned it before hand 🤣
@@secret_one nah you can only notice it up close so in videos etc it never shows, I also have carbon fibre wrap which doesn’t attract dust but gives a bit of a shine on camera.
@@alexkayracing Well then alcantera is the correct product for your situation as shine is no good in a video.
the Alcantara is fine BUT the patchwork around the buttons is not.
I have plan do something like this but left side my rig, contain is, Racelogic display, Evil Rank Driver display and / or Streamdeck and / or Button box like your set.
Nice mate! Yes left side can be done as easily as right side, best of luck!
Guide ? Mount pre bought button boxes and cover a carboard piece with alcantara tape boxes to fascia !
Yep that’s pretty much it! Very simple process👍
Thanks for video. I am now step of building these to my rig and luckily i have big cardboard box of my electric mountain bike what i was going to throw away but i think i use it for material for rig :)
Nice mate enjoy and best of luck with your build!
What is better, the wheel base front the monitor or behind the monitor and use an extension to displace the wheel? Regards.
I would say behind the monitor using a long extension, I can’t really do that with my fanatec but maybe in the future!
A 2X2 or 2X4 would be a lot cheaper but you would have to be able to cut the right sizes and angles.
Also relatively easy to move things around, just screw in to a different spot and maybe drill a hole, but not move multiple times.
Yeah that’s true mate you’d need to be wavy with saw etc (which is simple enough) both ways have their pros and cons! Thanks for watching 👍
Nice video bro. Very good ideas
Thanks very much for watching bro🙏 hopefully it helps!
Great job!
Thanks for the support! 😁
great tutorial Alex! what do you use for support for the "passenger" seat?
No problem man, I’ve been so busy with LMU stuff that I haven’t been able to make a guide video on it.
It’s just a piece of diamond plate from hardware store that I put 2 holes in and then bolted it to a piece of aluminium profile. Then attached to the rig
@@alexkayracing ah I see! perfect, thank you so much mate! keep on coming with the great videos! 👊
@@geekyimp all good brother
hi Alex im just wondering on what brand is your lamborghini huracan evo GT3 wheel and how you like it i would like to buy one
Hey bro I like it a lot however the foam inside handgrips is about thin, I would have preferred the wheel with rubber grips instead. The one I am using is called Simedal X-GT
how do you get the POV camera mate?
Hey brother I use a GoPro on my head 👍
@alexkayracing thanks for the advice
@ no problem 👍
Top notch, Alex! I really dig the simplest of diy projects the most! 💪 But… is it fire proof?! 😂 I’ll rework my interior next year so I’m thankful for any input regarding this topic! Have a good week! 👋
Well there’s a fire extinguisher but it’s empty so if rig catches fire I am done for 😂 look I would say it’s fine as I’ve used the rig a fair bit this past year and I’ve never had any issues, just keep it clean of dust etc you don’t want too much build up.
The way I wrapped my button boxes is not ideal as it was my first time back then, I’ll have to redo them.
Apart from that the rig is very easy to keep clean of dust etc.
Thanks this will be very useful,but is there something stronger that I can use then cardboard or wood❤
You could use anything you like mate doesn’t have to be cardboard. You could use that thin plywood
Why would you attach with tape when there's mounting holes on the back of the button box that rests against a corner bracket?
Good question and thanks for watching.
1. If you try to match that top right hole up with the corner bracket then it will limit the lateral (lift-right) customisation as the channel for that hole is very small.
2. To be honest another way you could do it is place a corner bracket at the top and bottom of the bar. Then put the boxes on the bar and then push them firmly together with the corner brackets and then tighten (kind of like a vice) and then that would also be a good way to do it.
How did you attach the safety nets?
They are done with aluminium profile at the back of the rig, you can see how we built it here: ruclips.net/video/LsG2gjbgFKo/видео.htmlsi=eZjlNLVdO7PTDDcJ
Thanks for this link I love bro nice job
My pleasure mate best of luck with your build!
Hi Alex just curious what angle do you have your side monitors at thank you
Hey mate thanks for watching, my monitors are at about 38-40 degrees on the inside angle
Moooola! Cooool! 😎😎
but my problem is I have a Shifter sequential, a Handbrake and a shifter H... and I have no space for a buttonbox like yours... I have put it behind all these stuff in vertical position, and its difficult to access to it 😅... I would post a pic to show you but I dont know how.
(sorry my englissshhhh)
Yeah I know is some people have this problem! You can maybe get some extra piece of profile and still have it vertically but make it closer to you! You can do anything with aluminium profile!
@@alexkayracing the sequential shifter and handbrake are a distance perfect for me.... if I brought them closer to me, it wouldn't be comfortable or realistic.
@@Dani_Jari sorry I meant you could put a small piece of profile sticking out so that you can attach the button box to that vertically to make it closer to you, it’s probably easier to show you 😂
I want to do something like this with the button boxes on the right-hand side and a shifter on the left as I'm from the UK, does anyone have any ideas on how i could do this
With some pieces of profile you can do anything! I would do the same here but just set it up on the left side of the rig instead of the right
@@alexkayracing if I had buttons on the right and a shifter on the left, would it be easy to get in and out of the rig
Where did you get button box?
Hey mate all my button boxes are from simracing4u.myonline.store/
You can use my code ALEXKAY for 10% off 👍
Are there buttonboxes for xbox?
Those ones are PC only but I believe sim racing 4 U makes console compatible boxes
Unfortunately SimRacing4U do not do Xbox button boxes
They make a PS5 box but not Xbox have just checked
@@alexkayracingxbox require some sort of chip/software to be recognised on xbox PS don't. ❤
@@Simlife101 PS does also but Ariel from simracing 4 U isn’t able to get an XBox currently for testing
Like it great look 😎
Thanks bro hopefully it helps 🙏
I like mine to look clean and neat at all times i guess your application is for videos. Also it maybe cheap for materials but in total with button boxes you need my console cost a minimum of £400 to build with button boxes
You can make your own boxes cheaper, the whole point is you can save quite a lot doing it this way as opposed to using wood and building a structure.
My setup is clean most of the time but it can gather dust pretty quickly.
Only thing for my boxes is because they were my first ones I wrapped I didn’t know how to wrap them properly, in the future when I decide to re-wrap them I know how to make it look clean and smooth; for now there’s no need because you can’t see any of that in videos, only up close.
Which it’s your steering wheel
Which one brother I have a few
@@alexkayracing lamborigni gt3
@@alexkayracing the one is in this video
@@bryansuarez3203 that’s the Simedal X-GT
@@alexkayracing thanks bro
those button box outside wrapping looks terrible
That was my first version I made, I made it cleaner later on, process doesn’t change though👍
Recommended speed 1.25
Quick tip, an easier and better way is go VR.
I think now it’s getting close to where VR is almost an always viable solution.
I remember when I started simracing it was in VR, and even with an RTX 3080 at the time that GPU still wasn’t enough to get a decent frame rate without lowering the graphics and reducing the experience. But now I think thinks are getting pretty close especially with this quest 3 headset
Looks very tacky.
You mean the alcantera on the boxes? Yeah just re-did it it looks smooth now
Probably should have just kept that comment to yourself
@@AlieNateInc ah all good mate, you know what people can be like 😂
Let's see your rig ya dink.
How to make a console: buy button boxes, mount button boxes. Worthless. 0/10 & dislike.
I think you’re being a little over the top there? You could easily do it without button boxes and use stream decks etc, use your imagination.
Cool!!!!!
Thanks for watching! 🙏