Thank you very much for putting up this video ...you just saved me going insane ..got same two codes .bought sensor and throttle pedal , just cleaned up earth strap and it solved the problem ,but the position of d on throttle body off the scale during live data but no engine light coming on now ...thanks 👍
glad you found the problem. by the way in case u don't know when the change oil light reader comes on the dash and let's say you've changed the oil then to reset it by (boxer 2017) ign off and pressing the acc and brake pedal down for about 20-30 secs together then turn ign on until the change oil light reader flashes then turn ign off and release the pedals. when you turn ign back in u should not have any change oil light come up anymore.
The MAF air intake sensor is placed on the left - next to the air filter box - ( rubber air tube ) a bit awkward to get at - remove sensor plug - check wiring entry on plug for for breaks - one screw to remove the sensor - wash with MAF spray cleaner from Halfords - leave to dry - refit & should solve your problem. Ed,
It finally turned out to be a problem with the earth connection from the battery to the body of the van, a fault code was showing throttle position sensor but there was nothing wrong with the position sensor it was the earth connection, it drove me mad for months.
@@under5kcars216 we are having 3 fault codes at the moment, currently P0657 P0335 and P0220. Two mechanics changed the crankshaft sensor twice stating that’s the problem but we still have faults. Maybe I’ll take a look at the earth connection and see what it looks like.
Thank you very much for putting up this video ...you just saved me going insane ..got same two codes .bought sensor and throttle pedal , just cleaned up earth strap and it solved the problem ,but the position of d on throttle body off the scale during live data but no engine light coming on now ...thanks 👍
That's pukka mate. If you get the code again check the airflow sensor.
glad you found the problem. by the way in case u don't know when the change oil light reader comes on the dash and let's say you've changed the oil then to reset it by (boxer 2017) ign off and pressing the acc and brake pedal down for about 20-30 secs together then turn ign on until the change oil light reader flashes then turn ign off and release the pedals. when you turn ign back in u should not have any change oil light come up anymore.
The MAF air intake sensor is placed on the left - next to the air filter box - ( rubber air tube ) a bit awkward to get at - remove sensor plug - check wiring entry on plug for for breaks - one screw to remove the sensor - wash with MAF spray cleaner from Halfords - leave to dry - refit & should solve your problem. Ed,
Thanks, Ed, much appreciated 🙏
The spacers responsible for the heater fan
What do you think about spinner mark showing under the counters? I ganna buy a Peugeot van 2004 has this sign.
Did you manage ? I have the same problem
Hi mate. It was the earth connection from the battery to the body of the van inside the cab, just by the front of the passenger seat.
Alguien me puede decir la ubicación de las bujías de incandescencia de la furgoneta boxer
Conecte mal la bateria que se quemó no prende jamper
Did you manage to get a manual ?
No sorry
?
what was the problem?
It finally turned out to be a problem with the earth connection from the battery to the body of the van, a fault code was showing throttle position sensor but there was nothing wrong with the position sensor it was the earth connection, it drove me mad for months.
@@under5kcars216 and you haven't had a problem after you cleaned up the earth connection? I have a similar problem
@@LockieandAsh No it was totally fine
@@under5kcars216 we are having 3 fault codes at the moment, currently P0657 P0335 and P0220. Two mechanics changed the crankshaft sensor twice stating that’s the problem but we still have faults. Maybe I’ll take a look at the earth connection and see what it looks like.
@@LockieandAsh No it was totally fine 👍