What Is In My Tool Belt? A Carpenter's Daily Carry
HTML-код
- Опубликовано: 2 июн 2021
- New Merch available here! sbc-store.creator-spring.com/
You can support the channel on Patreon www.patreon.com/user?u=16545763
Some of the below are affiliate links. I get a small percentage when you buy using these links. It does not cost you anything extra, but helps supports the channel. Thanks!
All the tools from this video:
Tool belt amzn.to/3wOb1YJ
Tool belt shoulder straps amzn.to/3ku2Ii3
Carpenter’s pencil amzn.to/3eu8RHu
Pica pencil (New Zealand) amzn.to/3wJ8qiE
Pica pencil (worldwide) amzn.to/3ihA1Co
The skinny Pica Permanent Marker (New Zealand) bit.ly/3uQXQVH
The skinny Pica Permanent Marker (worldwide) amzn.to/3zcq8g5
Tape Measure amzn.to/3wV1E9O
Speed Square amzn.to/3yAaE5f
The yellow Craft Knife (Links to a red one, it's the same though) amzn.to/3isKOtH
The little red knife/saw (new zealand) bit.ly/2RY4UTr
The little red knife/saw (worldwide) amzn.to/3Bjr3xe
Nail Punches amzn.to/3z8Y0KM
The drill Bit holder amzn.to/3etleU0
The phillips bit that is good for plasterboard amzn.to/2W13N77
The small red crow bar (new zealand) bit.ly/3wTVarX
The small red crow bar (worldwide) amzn.to/3BjqpQ8
The whacking chisel (new zealand) bit.ly/3vZNSDb
The whacking chisel (worldwide) amzn.to/3eA3rui
2 metre folding ruler that I like amzn.to/3iqI0wW
The Nips! Red handle nail pullers amzn.to/2UmzCXe
The timber handle hammer bit.ly/2Tyl5a9
The rubber sleeve for extra grip amzn.to/2UgLTN9
The demo hammer bit.ly/3ieVkG8
The little mini square (new zealand) bit.ly/3z2vTxQ
The little mini square (worldwide) amzn.to/3Bll7E2
My Work Wear
Work Pants euroworkweardirect.com.au/col...
Vest euroworkweardirect.com.au/pro...
Kneepads euroworkweardirect.com.au/col...
Belt euroworkweardirect.com.au/col...
The Camera Gear I use
Main Camera amzn.to/3AD2if5
Backup Camera amzn.to/3jTGTbv
Main Lens (main camera) amzn.to/3wp0hzU
Lens for Backup Camera amzn.to/3jWaFfU
Microphone amzn.to/36pNWAA
Tripod amzn.to/3yxSeCb
Headphones amzn.to/3xqm2R4
Drone amzn.to/3xp9OrO
Music in this video
Johto / samwiiise
Gurtybeats / gurtybeats
Donate here if you would like to help the channel - www.paypal.com/cgi-bin/webscr...
I'M ON INSTAGRAM scottbrownc...
SEND STUFF HERE
PO BOX 3506
Richmond 7050
New Zealand
Disclaimer:
These videos are intended to provide information and inspiration only. If you choose to imitate, duplicate or copy anything you may have observed in these videos, you do so at your own risk. Scott Brown Carpentry Ltd does not take any responsibility for any action taken as a result of the information or advice on this RUclips channel and shall not have any liability in respect of any injury or damage that may result.
To view full disclaimer, click here: www.scottbrowncarpentry.com/d... 
Хобби
Get well soon Scott.
“Get on the mend mate.”
Safe travels to you & the misses.
Tripped over at a silent disco fracturing your ankle. I love you videos mate like really enjoy them I'd like to work with you one day in nz. But that is the most Scott brown way of fracturing your ankle I've ever heard. I wouldn't expect anything less
I did that back In the day, bolt my straps to my belt. Remember, some people put a rivet on the X on the straps on the back... the suspenders come with one. I keep my hammer in the front loop, you need to use a wooden handle I like axe handle 12oz stiletto titanium
Good video. Chicago screws can open up new worlds of design without need to hire a leatherworker. I have a totally customized Frankenstein tool belt setup, comprising components from Occidental, Diamondback, Akribis, Atlas 46, Buckaroo, and even Menards. My wife, a seamstress, has even indulged my obsession by working through five evolving versions of a work vest, which I have designed to serve as a wearable field desk, strictly limited to small layout and marking tools, along with notepad and cell phone. Velcro pockets for thin magnets (removable for washing) are sewn into strategic spots so I don't need to put so many miscellaneous fasteners, etc. into my mouth at awkward moments. Your daily carry and mine share many preferences. Small world...
I was literally thinking of this question a week ago while sanding a floor!
Hope you recover soon Scott have an awesome road trip and stay safe buddy.
Have a great vacation. Heal well. And, thanks for listing all the tools in your tool belt.
Enjoy your time away Scott & Jess - it was an exciting episode. Speedy recovery 🙂👍
Hey Scott
The square base is wider and around 22mm so you can mark half way or centre on a 45mm thick piece of timber as most framing is dressed for this, really helpful when pitching a roof
You young guys are so lucky to have all those amazing tools to assist you, its different game nowadays.
Enjoy your time off Scott, you deserve it for all the work you do.
Hope you heal up soon. Thanks for all the wonderful content!
Hey Scott, love your channel. Started watching it when I started my apprenticeship 3 years ago. Also a residential Auckland builder. Did the same injury (avulsion fracture and 2 torn tendons (maybe get an ultrasound too!)) 4 weeks ago playing football. Difficult not being mobile but enjoy the time off, it'll get better soon.
Keep at it, you're a legend.
I hope you have a speedy recovery Scott, I feel your Pain! I rolled my ankle two weeks ago steeping out my back door onto a low step, took a trip to A+E for an x ray and thankfully I didnt have the broken bone issue you have so didnt have to wear the boot. Ive torn the ligaments though so my whole foot and shin have been swollen and bruised every colour in the rainbow. All the best from Scotland mate.
Great video!! Really good to see what others use for their set up and daily carry.
Get well soon bro, thanks for all the great vids. I've learnt so much from you. Peace and love brother.
I was literally searching youtube for this type of video last week. you read my mind! Thanks for the insight!
That little Hultafors prybar is one of my most used tools I have! My initial thoughts was that it would be mode or less useless due to its size. It proves me wrong all the time! Love it!
Enjoy your healing-trip!
I just got this system from watching your videos! It’s been about 4 weeks w it and I get excited every time I get to wear it! :D
Speedy recovery Scott. Enjoy your trip!
I tend to cut more & more timber these days using the speed square as the saw guide. It saves a heap of time going out to where the mitre saw is set up & is very accurate.
Nice to see someone have their tape On The proper side. I always find it funny when people keep their tape on the same side as they’re handed. To be quick and efficient you need to have your dominant hand ready to use your marking tool. Your square has a larger heel because it’s a better set up for framing when your wood has more wane on it, it’s still able to reach deep enough to reference the perpendicular surface of the wood.
Awesome. Thank you. I have a very similar all leather occidental setup, but for drywall. I have a little leather/metal hook thing for a gun. It and the last loop of my suspenders sit nearest to open end of the belt and would like to fall off. I'd been using a zip tie to keep it all on. BUT I actually have some of those Chicago bolts and didn't really thing to use them to fasten it all together. Very awesome as now I'll actually be able to take my belt apart if needed without wasting zip ties.
Speedy recovery and happy holiday Scott
Scott. Have a brilliant, relaxing and well deserved break on the South Island. And " Ouch"! Speedy recovery. Oh and as always brilliant video and content. Stay safe.
Have a great holiday and hope you heal up quick!
*at a silent disco*
Scott:
*trips*
Scott:
Love your video. You’re extremely talented and I enjoy watching each and everyone of your videos
I just ordered the diamondback Denali tool belt setup, super excited
A note on the Milwaukee speed square... Here in the US, 2x4 framing lumber can have a rounded edge, the wider end on that square helps to get a nice square purchase on the boards to get clean marks and cuts. I have a few cheapo squares from Empire and Harbor Freight, but after I got that Milwaukee square the others sleep on the bench. I got mine in a two pack around Christmas time for about ten bucks. Good buy.
Got the hultafos small bar a few weeks ago, SO useful!
One of those tools you wonder why you didn’t get it sooner.. plus pretty cheap.
Get well soon!
The good old German folding rule, often misused as barbecue tongs.
Heal up fast and heal up strong Scott!
Gonna miss ur videos this weeks man. Have fun in ur vacation and i hope the recovery will be quick
I have the leather only straps, but instead of using the leather loop in the front I hook the front of the suspenders on the center of each actual pouch.
It was a game changer for me, and lasted close to 10 years, still going strong.
I found it brought the front of the bags up so they would't sag much. Way more comfortable in my opinion!
“fractured my ankle at a silent disco” is my favorite Capital Cities song 🎶
Nice video. I run a very similar setup. I pieced my bags together so I have the 3 pouch version of your left bag and the 2 pouch version of your right without the little tape holder thingy. I did switch to the diamondback belt which kind of has 2 belts to keep bags from flying off and having to play 100 nail pickup every time I'm trying to put on my belt. Before I got that belt I did the same thing that you did with the occidental belt. I also mounted a diamondback hammer holster to my right bag. It took a bit to get used to since I ran my loop in the back for 10+ years. It's especially nice when you have something you're holding overhead and sometimes that hammer being in the back can get tricky to reach. But really the only tool differences are that I don't carry the little saw/knife or a folding rule and I run one of the flat scraper style trim bars instead of the little prybar. That was one of the best things I started carrying around, I use it for a chisel, scraper, a flat punch, obviously prying. Just a great all around tool for every type of carpentry. But from a fellow old skateboarding carpenter Get yourself healed up and have a great little vacation.
Speedy recovery mate and have a lovely time away.
Just ordered the toughbuilt tool belt, I like the modular clip system 👌
Good choice Bro.
Just got a OCC toolbelt love it more then my DB toolbelt, OCC toolbelt just fit me better
Have a great, and well deserved break! I'd be interested in seeing you pull back the curtain a little on the video side of your work. Do you have some "no pencil marks" principles that make your videos what they are? For me they are set apart by a lot of attention to the photography - each shot tends to be really beautiful. And in the DIY genre the opposite tends to be true -- it's usually just about filming the process with zero attention to the form. There's also a lovely consistent laid-back vibe - the music, the interstitial scenes, the low stress workplace attitude. I love it and I bet the rest of your subscribers do too, but I wonder if it's as satisfying from the creation end - that is, do you find yourself getting curious about experimenting with different styles?
This is an amazing comment! All of the things I only subconsciously thought about Scott Brown videos, and all of the questions I didn’t know I needed answering. Good work man
Oh yeah, I'll second (third?) this!
Absolutely agree. It's so jarring when I watch a random carpentry video and the audio is all off, or the editing is clanky, or the person is fumbling with their words. It might be easy to underappreciate how much work Scott clearly puts into each video but it's why I subscribed nearly 3 years ago
Hope you get well soon. And have a great time on the South island! All the best from the Netherlands
Take good care of that ankle. I had the same injury when I was 19, now 46 I’m suffering with arthritis in the same ankle. Have a good trip 👍
Scott, make a good recovery, health first👍💪🇨🇵. Don't worry your fan base will waiting for you.
Hope you get better soon Scott and enjoy you time off.👍👍
Your videos always make me happy
I bought the hultafor chisel when I got my first pair of snickers trousers, tbh I didn’t like it much at all because of the double bevel. I soon replaced it with the Morakniv chisel and that has been an essential tool on every job, highly recommended
Love the ACC ad before the video started with you hobbling in.
Greetings from California 🙋♀️ my husband and I are enjoying your videos !!!! I ordered the belt for him for Christmas 🎄 it will be under the tree 🌲 🎁 I shall order the shoulder straps soon their brilliant !! Hope your foot heals soon … MERRY CHRISTMAS 🎁🧰🛠🪚🎚 Cheers 🥂
Well done video! I'm deciding which belt to invest in!
Hope your ankle heals soon scott. Take care.
Look forward to the next video.
enjoy the break and I hope a speedy recovery!
Have a good rest and hope the ankle heals quick. See you soon buddy!
Enjoy your trip bro, i'll keep my eye out for you in Christchurch, i'd love to buy you a pint!
Enjoy the trip, speedy recovery 🙏
Pretty cool how your kit seems to selected to be light weight yet full function.
Just saw you on The Project, how awesome luv Congrats
Stay safe
Have a great holiday Scott and Jessica 🌼
Hope you have a speedy recovery
Hope you feel better soon. Have a great vacation
Hope you heal up fast. Enjoy the time off, even if it wasn't planned.
Enjoy being down in the mighty South, Scott. Rain all weekend scheduled so no long runs, aye.
Great video Scott, glad to see your taking time to heal up.
Here in the US they never want to give you time to heal up.
Here in NZ, we have a govt owned insurance company called Accident Compensation Corporation (ACC). So Scott will be paid 80% of his normal earnings, for as long as he needs to take time off.
Keep up the videos. Sorry about your ankle! Hope you’re well soon!
Thx for video and wish you well, hope not in pain✌🏻
A friendly tip for ya….hope don’t mind
0:08 I’ve got one of those “pump up air compression” boots. Broke right foot while back and had to wear for 8 weeks. Then went to a “shoe” for 4-6 weeks, and after that, back to my reg orthotic shoes…..hurt paying for orthotic shoes and inserts; as I’d rather have paid for new tools, & for the cost; coulda got A lot of new tools.
As uncomfortable has is wearing that boot, does help; just a tip from someone who wore. Be mindful have walking a lot, and it making your normal “gate” diff when walking and working; especially on those “hips” and lower back. If need be, medical massage and a good chiropractor that also is open to “alternative medicine”, as could help mitigate pain a d issues possibly could have down the road.
Get well soon, i found the Milwaukee silver tips dont last but the black tips are pretty good. I have gone through 4 tips in 10 days just doing light diy (yes i am straight on and stop the impact before pulling off the screw)
If Scott Brown falls down at a silent disco and nobody is around, does it make a noise?
Hope you a speedy recovery!!!
Something consistent I see in veteran tool bag lay outs is that things have been parred down heavily to what actually gets used consistently. Despite the trade apprentices always feel obliged to make up for inexperience with more tools. As experience grows, tools get shed.
There's a fine line between carrying less in the pouch and not bringing what you need to do your job. There's nothing more frustrating than working with someone who always asks to borrow the same thing. If you're asking to borrow the something more than 3 times go to the bloody store or take it back out of the shed.
I keep magnets in the pencil slot on the suspenders. Really handy
Speedy recovery good sir , and god speed.
Thanks for the video from Davenport Iowa USA 🇺🇸
You’re kidding??...classic, the tool belt set up is awesome 👏 I also carry a left and right bevel marking knife for joinery quality cuts.
All the best wee ripper 😎
Would love to see a video on how you go about pricing a job!
Get well soon Scott and enjoy the break
I hope you make a full and speedy recovery mate
Just dislocated my ankle last week installing siding. Tripped on some riprap
Have a great vacation, Scott!
We wish you a speedy recovery Scott ,old jimmy australia
Get well soon Scotty, Keen for your next exciting episode.
Enjoy the trip !
Ouch, sorry about the ankle. Hope you heal quickly.
get better Scott 👍 and enjoy your trip
Have a great break!!!! (LOL) Please make a video about your holiday too!
Get well soon Scott, enjoy your videos
I second most of your tool belt content. However as mentioned in another comment; the Hultafors chisel is good for banging and demo work. You should try to get hold of Mora’s equivalent, it’s excellent and keeps its edge very well. It’s my go to, and also for sharpening the carpenters pencil. The classic carpenters pencil can be used for thin hairline marking woodworking accuracy and then shift to a bold line for rough marking, and you’ll be brute to break the tip 😉 The Pica stuff I only use as a general pencil. And yeah, that small Hultafors (or other..) pry bar is invaluable!
One piece I forgot to mention; I’ve recently added a 150mm Starrett combination square, highly recommended!
Hope you heal up soon Scott, trust being less mobile doesn't frustrate you too much
Get well soon Scott and stay safe
Milwaukee speed square has a wider base that is offset so you can use it to scribe things at two common offsets. Marking your Quarks for example.
Enjoy thy days off, keep us posted.
Silent Disco?!? I have so many questions!!!! 😁 Ahhh, thanks for the explanation at the end.
see you soon mate big fan of your knowledge
Speedy recovery Scott.
I hope you will heal well soon !!
amazing Scott, I use the "can he hang a door?" on a daily basis now. You guys enjoy this couple of weeks, much deserved it!
Speedy recovery Scott 🔨
Recover quickly and enjoy unaspected time of.
But take it easy with that ankle. I endured same and now five years later still bothers me being electrician.
Greetings from Netherlands.
Wish you a good recovery from Belgium.
Great video, sorry for ankle, enjoy on few free days.