Hey Im looking for a new fork son crashed his into me. I can't seem to find any options almost all forks are qr 9mm forks? Do u know if they will work with bolt on wheel?
Cool video. I've been wondering how to do this. Thanks for taking the time. I have probably the same version of this bike but with the 20ah battery instead of the very basic 15 ah version. Thanks again.
Hi Rich ive got the newer frame 1500w and when I bought it said upgraded forks and measured my fork tubes. I’m getting 700mm I was wondering if I’m measuring from the wrong place (top of where the hub nut is) These shocks say 675mm Is that correct. I’m ordering second set of shocks because I grabbed the wrong ones before so just want to make sure these ones will work I could always move some of the spacers around if I have to yes? Thanks these are the Bolany shocks
great video! currently waiting on my Ridstar to arrive ,im so excited!! Could you possibly do a how to video on bleeding the hydraulic brakes and maybe what to look out for if air gets in the lines. =)
you shouldn't have to bleed the brakes when the Ridstar arrives. Assembly a god. There are plenty of youtube videos to bleed brakes, but I do have a hack if you have a air in the lines
I tried installing the Himalo Fat Four R34 26 inch forks but the fork tubes were too small in diameter to fit the stock Ridstar Q20 Pro crown rings so I went ahead and ordered your Bolany forks …can’t wait to try them 😃
Hey B Rich, I was wondering if you know if the RIJIXU forks are the same measurements as these? They seem to be. Many people have installed rijixu on to the Q20 so I was just wondering
Hey B Rich! Apparently the air fork industry for these types of eBikes are upgrading to 34mm dia. down tubes (32mm Q20 (& others) must have been collapsing under stress, from dummies trying to "X-Game" jump these eBikes I guess). Anyways, the 34mm stem is shorter than Q20, so needs extension or higher handlebars (as you showed in your other videos) but also comes bare, no bottom crown race. So it's either buy a tool to transfer Q20 crown race or buy a new crown race. My question is, would you happen to remember what size crown race to purchase? I know the ID is 30mm but what size OD to seat existing bearings properly, 44mm maybe? And what stem extension/type do you recommend particularly for the Q20 if I wanted to keep my existing handlebars? We all really appreciate your quick responses & all your hard work creating these valuable videos! Please keep up your great work, Thank you!
I got my Q20 Oct of last year. Got the air shock setup about 3 months later love it this year I upgrading to the Q20 Pro. Should this setup work on the new bike?
B Rich solution, thanks for your help OK I have the same bicycle but I could also like to change the front suspension but my question is if it mandatory to buy the shock pump too thanks ..
Hey B rich, Could you tell me how to take off the front crowns, my front forks came in twisted and wobble when I move the handle bars, I have the 1000/1200 watt version of the bike if you were wondering.
Hello I know this is an old video but I have a ridstar and am trying to install new shocks to the rear. My crank arm is not moving at all when I take the old shock off like yours does In the video. I cannot figure out why for the life of me. Any suggestions please and thank you!!
The many bike shops near me will service ebike typically bike parts like chain, transmission, brakes, but only ebike shops will deal with electrically components. There is nothing exotic with the electric drivetrain and most parts can be bought online
See description of video or links below Link to Front Air Suspension on Amazon: amzn.to/47hWuYH Link to parts on AliExpress: 20x4 Front Fork: s.click.aliexpress.com/e/_DEM8Nu5 Rear Air Shock 165mm: s.click.aliexpress.com/e/_Dk1F66B Shock Pump: s.click.aliexpress.com/e/_DdIPe3t
A second 20ah battery will not fit in the frame but a 10ah or 15ah will fit see video for step by step instructions how to ruclips.net/video/Z7i8O1BFJdc/видео.html
Thank you so much I'm planning on buying ridstar Q20 lite & w/ 13 ah and I'll build it up over time. I just can't wait. I can't wait another month to have cash to buy 20AH. Any advice on that? Thank your your videos have been a huge help
Hi rich I bought a similar shock. Not the exact same but 32mm tubes. Now it’s a couple inches shorter than the original but says same length as the ones you are using the 628mm length. Same as the ones you are using The 26” are taller on aliexpress Are the ones you used shorter than original
Actually looked again and yours is 675mm and the one I have is 628mm I think when I first looked it was some glitch and ended up with something very similar I think the same shock but 628mm. I’m not sure what happened but that is a big difference in size
Bonjour et merci pour cette vidéo. J'aimerais ajouter la fonction de bridage et de marche arrière au contrôleur, mais je ne sais pas comment extraire la carte électronique (les transistors sont bloqués par une sorte de clips). Savez vous comment faire? french trad by google: Hello and thank you for this video. I would like to add the clamp and reverse function to the controller, but I don't know how to extract the electronic board (the transistors are blocked by some kind of clips). Do you know how to do it?
Link to all the parts in description below the video but I have included them below Link to Front Air Suspension on Amazon: amzn.to/47hWuYH Link to parts on AliExpress: 20x4 Front Fork: s.click.aliexpress.com/e/_DEM8Nu5 Rear Air Shock 165mm: s.click.aliexpress.com/e/_Dk1F66B Shock Pump: s.click.aliexpress.com/e/_DdIPe3t
Hey B Rich! Got Q20 (Upgraded version). Ordered 20" air shocks from Aliexpress, first Bolany then Nanlio. Just like you said in video they sent you 34mm dia. down tubes, they keep shipping me 34mm's (though the listing clearly states they are 32mm & I thought I was purchasing 32mm). I have returned twice, wrong sizes sent to me. What did you finally do to have them ship you the 32mm instead of the 34mm (a note along with order? A bribe?). Please share us your secret! (lol) Thx!
I order the bolany about a year ago when they had 32mm tubes so they must have changed the design. You can still install the Bolany with 34mm tubes you just have to swap the crowns and add stem extension like I did in my Jansno or Yolin ebike, see those videos
For the cheaper ridstar it has a different fork do you know how to use a different fork because that fork is not compatible with my ridstar. Great video though!
I wonder if this a typo or then upgraded the fork 34mm. I bought this fork last month and it is 32mm tube. Either way order the fork if the down tube is 32mm the install with be easy if 34mm then install like I did on Jansno ebike ruclips.net/video/dq3sseWgXOw/видео.html
@BRichSolution Thanks for your help. Either way I am ordering them because obviously the stock suspension in junk on the q20. I'm hoping they are 34mm and I have to go that route cause I'd rather my forks be a little beefier than not.
Partly based on your video's I bought this bike. Arived today. Sadly rear fender broken and front brake disk has a weird manufactured defect, goes up and down by almost 1cm. Will contact the supplier. Related to this video I have a question about the suspension. The rear triangle. Rear pivot point as quite a lot of play in it. Sideway force on the bottom breaket 2- 3 cm of movement. The pivot point seems to be a cheap construction, no bearings, probably some kind of rubbery bushing (I hope at least something is in there) but ist very easy to see it move. Also visible when you shake the bike at the handle bars. Can't be very good for handling of the bike. Is this normal for this bike.
@@BRichSolutionthanks for your answer you seem to have the most experience with this bike. Seems that I have a lot of issues. The damage and front disk are easy to rectify. Max speed only 26 miles, not being able to limit the max speed or changing drive modes ( and not disabling trottle) are bigger problems. The play in the rear suspension is 2-3 mm at the pivot point, at the wheel its a lot more (cm's). I will try to make a small movie and post it but have to figure out how to do that.
Yes, had the same issue with my Jasno as the pivot bolt over torqued preventing the rear trailing arm and shock to move. See video ruclips.net/video/49pStt2NIks/видео.html
B.Rich I tried doing this but ordered the fork from your link in description and it was the wrong size. I had to reinstall the stock fork due to it being for the ridstar Q20 I learned the hardware that the Q20 PRO has a different frame even though they seem similar. I'm reaching out because through your videos I was able to learn how to upgrade my brakes and fork if it would have been the correct size. I am reaching out to you to see if you can help me by informing me of the correct front fork and rear suspension size for my Ridstar Q20 Pro? Thank you for your videos they are very informative. Look foward to your future videos.
The neck part is a bit too big to go through the crown that comes on the q20 pro. I followed your instructions to the tee and the one you have on your link the shocks themselves meaning the long Part with the air adjustment red air release button those two shock poles were noticeably thinner on the model you shared on link The neck was a bit big didn't fit on the part that the stem that connects to handlebars was too big. Common sense tells me it's probably a 34mm. But I am looking all through the internet for the specs and can't find it The specs for the one you have on your RUclips was easy to find but the q20 PRO all I find is the other 2 out of the 3 models. I have the 52v 40ah which is 2 batteries at 20ah each.
B Rich... great videos on the Ridstar q20.... I just got mine the other day and so far, so good. I love this thing. It looks good and is quick and powerful. I'm also looking to do the suspension upgrade you made it look easy. One question if I may... regarding the brakes my q20 the rear brake is operated via the left handle; and the front brake works from the right side handle...? this is opposite of all of the mountain bike and motorcycles I had through the years. Is that by design or a mistake? It will take a bit to get used to....
By design… having left handed rear brake is safer IMO as you can keep hand on lever and right hand twist throttles. This way in emergency you don’t have swith change from throttle to rear brake on the right side
Bolany fork linked in video has same size tubes which slide into factory crown and much easier install then most other forks are different size and stem is shorter needs some extra work ti get it to fit
I bought this very bike because of the video that I saw of you. Riding it through the off-road grounds.. I put the bike together. The screen flashed power for just a second and I cannot get it back on at all. Do you have any suggestions to get my Ridstar up and running? I would greatly appreciate your help. I do not want to send this bike back.
I had that happen the first time too. I had to make sure the battery is seated into the mount and locked, the. Turn the key on then hold the power button next to + / - If that doesn’t work request a new bike
B Rich solution two weeks ago, I ordered the same. I only used for a week and it turns on fine but it won't start it doesn't want to run. I went to the bicycles mecanic and they told me that the controller and and throttle are damaged. Please I don't know if you can help me. what I can to do for my bicycles thanks
Reach out to manufacturer for replacement parts. I havd this happen on my Emoko c91 and received replacement parts. While the part arrive try replacing the throttle via amazon if it doesn’t work return it. amzn.to/3DQuVbh
not the super73 seat will not fit due to the V shape on the frame where the seat mounts on the Ridstar Q20 and Ouxi v8. The stock seat is comfortable IMO; it could look better
I couldn't do the front upgrade to my Ridstar. My shocks only had 3 screws on one crown and the bottom crown has no screws and looks welded on. I couldn't slide them out so I took the entire front apart. The front fork upgrade you're suggesting the washers on the original fork wont slide all the way down in the middle, they get stuck before it hit the bottom. If you cant slide out the shocks this wont work.
Do you have any update after riding this for 4 weeks? Is the new ride with the new suspension significantly better? Do you even notice it? It looks like Ridstar already upgrades the suspension on their 2000w double battery version?
Ridstar Q20 is great bike for $1000. The Ridstar Q20 pro with dual battery and 2000w is not priced right see video ruclips.net/video/KPf2C8uzaVo/видео.htmlsi=9I8eh_JEWjGEg8G6
Was 34mm Bolany brand or different? You can still use the 34mm fork you will need to replace the factory upper and lower crowns that come with crowns that came with the new fork
Can you do a video for how to replace the half throttle with full twist throttle? I have the same bike and I want to change the twist throttle. I have no clue how to replace the twist throttle.
I received my q20 3 1/2 weeks ago and already have 1000kms on it Replaced the stock seat with a mini bike seat as after 4-5 hrs a day of riding I found yhat my butt got really sore Planon buying a 2 more batteies and mounting them on the cross bar on the front
Hi there. Love your videos. I just got my Ridstar a few days ago and was wondering if I was to upgrade suspension. Would it be best to do rear first I’m on a budget. Just wanted to know what you think is most important Also I’m in Canada wanted to know what you think of DNM AOY-36RC 165mm MTB downhill rear shock? I lick on and off road. Also shocks first or tires? Thanks
@@BRichSolution thanks very much. I did watch your suspension videos. I’ve actually watched all of your Ridstar and several others. I even used your assembly video to setup my bike. So happy to have found your channel. A huge help👍 so rear shock it is then I just wasn’t sure which was most important upgrade but feel the rear is almost hard tail stiff with stock
@@BRichSolution I’m also 6ft tall and was thinking of maybe taller bars but not sure if the harness has enough length. Do you think there is room to go higher or would I need some kind of wiring extension
At 6’2 I’m kinda at the top end of riders height wise per this bike specs. I do sit all the way back which helps. I am having a blast riding but Any tips which shock or mod can get my max ride height increased?
I followed this video & my rear air shock won't budge... the o ring stays at the top & doesn't move at any psi. I'm starting to think suspension doesn't exist with this bike. Wish i never bought the pump, shock, bike, or the rest of the other crap, but I'm in Ireland, so im now stuck with this shite!!!!!
All the links are in the description below under video but also posted below for your convenience Link to Front Air Suspension on Amazon: amzn.to/47hWuYH Link to parts on AliExpress: 20x4 Front Fork: s.click.aliexpress.com/e/_DEM8Nu5 Rear Air Shock 165mm: s.click.aliexpress.com/e/_Dk1F66B Shock Pump: s.click.aliexpress.com/e/_DdIPe3t
I bought this bike and the rear motor cable got severed and I contacted the seller and I was able to buy a brand new rear motor and all the hardware, the people were nice and really helpful on getting my new parts too
I have double battery double motor . Did 30 km with only half of the 1st battery today. Best bike ever👍
Thats great. What is your top speed 48 or 50 km/h?
Hey Im looking for a new fork son crashed his into me. I can't seem to find any options almost all forks are qr 9mm forks? Do u know if they will work with bolt on wheel?
@@BRichSolutionmines about 30mph
@@BRichSolution hi top speed ist 56 60kmh
6:38, wow you do that really good, looks like years of practice! 6:45 Oh baby, work it!
lol
😆
I’ve been enjoying your videos! I kept thinking on this one first thing I’d do is paint those white panels!
It look much better with white panels painted
thank you so much i was so worried about getting new forks for my ridstar, especially because im pretty short so i needed these shorter forks
Yes you can get a short shock like 150mm to make seat lower
I did like this video. I’ve been thinking about buying one of these bikes but the suspension is no good coming from the factory. Your video helped.
Glad I can help. All the ebikes under $1500 do not have good suspension
Cool video. I've been wondering how to do this. Thanks for taking the time.
I have probably the same version of this bike but with the 20ah battery instead of the very basic 15 ah version.
Thanks again.
20ah battery version is worth the extra money as 15ah is not good deal
just purchased mine! Thanks
Hope you enjoy it!
Clear and simple, thank you for sharing.
You are welcome!
hey. can you suggest any upgrades for the brakes? pads, discs rotors...thanks
Shimano pads amzn.to/3PVSUMF
@@BRichSolution thanks so much. What about disc rotors in your opinion?
Swap seat for a mini bike seat
Hi Rich ive got the newer frame 1500w and when I bought it said upgraded forks and measured my fork tubes. I’m getting 700mm I was wondering if I’m measuring from the wrong place (top of where the hub nut is)
These shocks say 675mm
Is that correct.
I’m ordering second set of shocks because I grabbed the wrong ones before so just want to make sure these ones will work
I could always move some of the spacers around if I have to yes?
Thanks these are the Bolany shocks
Ya move the spaced around on the steering tube to make it work
great video! currently waiting on my Ridstar to arrive ,im so excited!! Could you possibly do a how to video on bleeding the hydraulic brakes and maybe what to look out for if air gets in the lines. =)
you shouldn't have to bleed the brakes when the Ridstar arrives. Assembly a god. There are plenty of youtube videos to bleed brakes, but I do have a hack if you have a air in the lines
@@BRichSolution oh ok thats good to know! whats the hack?
what replacement brakes do you suggest. my front fork starts shaking when braking sometimes with from breaks and the back ones squeaks?
4 piston brakes would be best option see video
ruclips.net/video/9RATJ6J8l6I/видео.html
I tried installing the Himalo Fat Four R34 26 inch forks but the fork tubes were too small in diameter to fit the stock Ridstar Q20 Pro crown rings so I went ahead and ordered your Bolany forks …can’t wait to try them 😃
ya 26" is too tall; 20" will work
@@BRichSolution hi B Rich I received my forks, but the 20 inches at first glance look too short out of the box
Hey B Rich, I was wondering if you know if the RIJIXU forks are the same measurements as these? They seem to be. Many people have installed rijixu on to the Q20 so I was just wondering
Yes they will work
@ which do you recommend? I think Rijixu has a bit more travel
Hey B Rich!
Apparently the air fork industry for these types of eBikes are upgrading to 34mm dia. down tubes (32mm Q20 (& others) must have been collapsing under stress, from dummies trying to "X-Game" jump these eBikes I guess). Anyways, the 34mm stem is shorter than Q20, so needs extension or higher handlebars (as you showed in your other videos) but also comes bare, no bottom crown race. So it's either buy a tool to transfer Q20 crown race or buy a new crown race. My question is, would you happen to remember what size crown race to purchase? I know the ID is 30mm but what size OD to seat existing bearings properly, 44mm maybe? And what stem extension/type do you recommend particularly for the Q20 if I wanted to keep my existing handlebars? We all really appreciate your quick responses & all your hard work creating these valuable videos! Please keep up your great work, Thank you!
See this video for full shock replacement, same procedure applies to ridstar & janso
ruclips.net/video/dq3sseWgXOw/видео.html
I got my Q20 Oct of last year. Got the air shock setup about 3 months later love it this year I upgrading to the Q20 Pro. Should this setup work on the new bike?
yes it will work with Q20 pro
What kind of paint did you use to paint the “peg board” on the sides of the bike?
Stand black spray paint
B Rich solution, thanks for your help OK I have the same bicycle but I could also like to change the front suspension but my question is if it mandatory to buy the shock pump too thanks ..
Yes you need the shock pump to adjust the pressure
Would the Bolany 26 inch fork work on my Q20 Pro ?
26” fork is too tall and would elevate front end on 20” wherl ebike. You want to use 20” fork
Hey B rich, Could you tell me how to take off the front crowns, my front forks came in twisted and wobble when I move the handle bars, I have the 1000/1200 watt version of the bike if you were wondering.
You might need a mallet to tap off the top crown. The bottom crown is probably welded on the fork tubes with the 1000w version
@BRichSolution thanks that helps a lot
Hello I know this is an old video but I have a ridstar and am trying to install new shocks to the rear. My crank arm is not moving at all when I take the old shock off like yours does In the video. I cannot figure out why for the life of me. Any suggestions please and thank you!!
Loosen the rear trailing arm bolt like i did with my other bike
ruclips.net/video/49pStt2NIks/видео.html
@@BRichSolutionthank you very much
If my Ridstar Q20 breaks, would the repair shop be able to fix it even though it’s from Amazon?
The many bike shops near me will service ebike typically bike parts like chain, transmission, brakes, but only ebike shops will deal with electrically components. There is nothing exotic with the electric drivetrain and most parts can be bought online
I got mine yesterday and need to replace the rear shock also. Do you think the 190mm would fit? I'm thinking it would give me another 1" of legroom
Ya 190mm will fit. See how you like it if it doesn’t work return it and get the 165mm
i have q20 lite the front and back shock is the same ?
Front and back have the same shock?
@@BRichSolution sorry my english is bad ;) I have a q20 lite I want to know if the shocks you installed on your q20 pro will work
did you bottom out at all on the stock suspension
No stock suspension is too stiff for me at 180 lbs
just got mine today how long does the battery take 2 charge
2-4 hrs
Where did you get your rear suspension from
See description of video or links below
Link to Front Air Suspension on Amazon: amzn.to/47hWuYH
Link to parts on AliExpress:
20x4 Front Fork: s.click.aliexpress.com/e/_DEM8Nu5
Rear Air Shock 165mm: s.click.aliexpress.com/e/_Dk1F66B
Shock Pump: s.click.aliexpress.com/e/_DdIPe3t
Is it possible to buy the standard 48v 20 ah, 1000watt bike and then add in just an extra 20ah battery later?
A second 20ah battery will not fit in the frame but a 10ah or 15ah will fit see video for step by step instructions how to
ruclips.net/video/Z7i8O1BFJdc/видео.html
What type of paint did you use for the panels?
Spray paint
@@BRichSolutionok thank you
Would you be able to use a bike pump for the shock or would i have to buy the special pump?
You need s shock pump thay cost $20 amzn.to/47N231v
We need a suspension test after the installation man.
It much better than stock. It took me some time to dial in pressures for my liking
@@BRichSolutionyes show us you on it and how it bounces that’s what he means
Have you tried the z8? Has dmsome beefy spring shocks. So in the sub $1000 cafe-racer / moped body styles I you recommend the Ridestar q20?
Z8 has smaller battery, mechanical brakes and seat is small so if you slide back in the seat you get a bar up your butt
Thank you so much I'm planning on buying ridstar Q20 lite & w/ 13 ah and I'll build it up over time. I just can't wait. I can't wait another month to have cash to buy 20AH. Any advice on that? Thank your your videos have been a huge help
Is there any kind of service do you recommend ? For example, brakes, brake pads, any kind a oils or grease?
Oil the chain periodically and replaced brake pads at 400-1000 miles depending how much you brake.
What are the bolts on the bottom of the fork near where the tire goes
Torque bracket
What’s it used for?
Hi rich I bought a similar shock. Not the exact same but 32mm tubes. Now it’s a couple inches shorter than the original but says same length as the ones you are using the 628mm length. Same as the ones you are using
The 26” are taller on aliexpress
Are the ones you used shorter than original
Did you buy the Bolany 20x4 fork or another brand like Bucklos?
Actually looked again and yours is 675mm and the one I have is 628mm I think when I first looked it was some glitch and ended up with something very similar
I think the same shock but 628mm. I’m not sure what happened but that is a big difference in size
is there any attachment that can protect the wires up front?
Yes there is cable stay for the front brake cable on the new air fork
What were your final settings for rear shock?
Same for front, what is the other adjustment on front, not sure were i should set that.
For air fork 150-200psi
For rear air shock 120-180psi depending on riders weight
Does this fit the q20 perfectly or did you have to buy anything else I'm talking about the front fork ???
Fork fit perfectly on the Q20; see video
Do I need 26inch or 20 inch
Hello I have ridstar Q20 Pro what forks your recommend to change it easy?
Bucklos or Bolany air fork
I have read the air forks have lots of flex. Did you find this the case?
Yes big upgrade on ride comfort and you can change air pressure based on rider ls weight whereas stock was not adjustable
I meant flex when using the brakes the person said it was so bad he sent it back.Not suspension travel of the fork.
Bonjour et merci pour cette vidéo.
J'aimerais ajouter la fonction de bridage et de marche arrière au contrôleur, mais je ne sais pas comment extraire la carte électronique (les transistors sont bloqués par une sorte de clips).
Savez vous comment faire?
french trad by google:
Hello and thank you for this video.
I would like to add the clamp and reverse function to the controller, but I don't know how to extract the electronic board (the transistors are blocked by some kind of clips).
Do you know how to do it?
No, I don’t know. I may replace the controller with new one outputs at 30A
No
@@BRichSolution ok, thank you.
It says that the diameter of the new forks are 34 mm on Amazon, are you sure they’re 32 mm?
It was 32mm when i bought it. If 34mm it will still work you would need to replace the crowns
What size forks did you get? I can’t find what MM it comes with stock. Do you have the specs for the front suspension upgrade?
Link to all the parts in description below the video but I have included them below Link to Front Air Suspension on Amazon: amzn.to/47hWuYH
Link to parts on AliExpress:
20x4 Front Fork: s.click.aliexpress.com/e/_DEM8Nu5
Rear Air Shock 165mm: s.click.aliexpress.com/e/_Dk1F66B
Shock Pump: s.click.aliexpress.com/e/_DdIPe3t
Would you recommend I flip my yolin to install the fork?
Ya its probably easier
Hey B Rich!
Got Q20 (Upgraded version). Ordered 20" air shocks from Aliexpress, first Bolany then Nanlio. Just like you said in video they sent you 34mm dia. down tubes, they keep shipping me 34mm's (though the listing clearly states they are 32mm & I thought I was purchasing 32mm). I have returned twice, wrong sizes sent to me. What did you finally do to have them ship you the 32mm instead of the 34mm (a note along with order? A bribe?). Please share us your secret! (lol) Thx!
I order the bolany about a year ago when they had 32mm tubes so they must have changed the design. You can still install the Bolany with 34mm tubes you just have to swap the crowns and add stem extension like I did in my Jansno or Yolin ebike, see those videos
would this work on the jasion retro
i will post video of Jasion suspension upgrade within a week. The front fork maybe a little unique and tricky to upgrade i need take some measurements
@@BRichSolution awesome appreciate you
Thanks all I was looking for, now I can change the suspension, do they send you one bc mine came like broken and I didn’t even realize
Upgraded suspension is big comfort upgrade
For the cheaper ridstar it has a different fork do you know how to use a different fork because that fork is not compatible with my ridstar. Great video though!
Is the cheaper 15ah risstar q20 have fork like the one in this video with the ouxi? See link for video
ruclips.net/video/mbCBl9HIH3M/видео.html
Hi, there. I always look at your videos. They’re very helpful. But I can’t find about ridstar q20 upgrade brakes. Is that same with ouxi v8?
Yes same brakes will work for Ridstar Q20
@@BRichSolution I get it, thank you so much!
The front axles are different now,i don't know why, it's so thin you slide it in i wish they still had a axle like yours
Hub carries the load, the thin axial bolt just keeps in place
I'm looking into upgrading my front forks on my q20. Are you sure these fit? I measured my fork tubes at 32mm and these forks say they are 34mm...?
I wonder if this a typo or then upgraded the fork 34mm. I bought this fork last month and it is 32mm tube. Either way order the fork if the down tube is 32mm the install with be easy if 34mm then install like I did on Jansno ebike
ruclips.net/video/dq3sseWgXOw/видео.html
@BRichSolution Thanks for your help. Either way I am ordering them because obviously the stock suspension in junk on the q20. I'm hoping they are 34mm and I have to go that route cause I'd rather my forks be a little beefier than not.
Thanks sharing, very informative.
Glad it was helpful
Partly based on your video's I bought this bike. Arived today. Sadly rear fender broken and front brake disk has a weird manufactured defect, goes up and down by almost 1cm. Will contact the supplier. Related to this video I have a question about the suspension. The rear triangle. Rear pivot point as quite a lot of play in it. Sideway force on the bottom breaket 2- 3 cm of movement. The pivot point seems to be a cheap construction, no bearings, probably some kind of rubbery bushing (I hope at least something is in there) but ist very easy to see it move. Also visible when you shake the bike at the handle bars. Can't be very good for handling of the bike.
Is this normal for this bike.
Sorry to hear about bike damage. Was the box busted?
As for bikes rear suspensions the 2-3mm play is not normal
@@BRichSolutionthanks for your answer you seem to have the most experience with this bike. Seems that I have a lot of issues. The damage and front disk are easy to rectify.
Max speed only 26 miles, not being able to limit the max speed or changing drive modes ( and not disabling trottle) are bigger problems.
The play in the rear suspension is 2-3 mm at the pivot point, at the wheel its a lot more (cm's). I will try to make a small movie and post it but have to figure out how to do that.
Can I have a link to the fenders you have?
Link to fenders s.click.aliexpress.com/e/_DlIlr1v
or Amazon link amzn.to/3q92h26
The rear wheel of my ridstar won’t move up and down like yours, even with the rear shock off
Yes, had the same issue with my Jasno as the pivot bolt over torqued preventing the rear trailing arm and shock to move. See video
ruclips.net/video/49pStt2NIks/видео.html
B.Rich I tried doing this but ordered the fork from your link in description and it was the wrong size. I had to reinstall the stock fork due to it being for the ridstar Q20 I learned the hardware that the Q20 PRO has a different frame even though they seem similar. I'm reaching out because through your videos I was able to learn how to upgrade my brakes and fork if it would have been the correct size. I am reaching out to you to see if you can help me by informing me of the correct front fork and rear suspension size for my Ridstar Q20 Pro? Thank you for your videos they are very informative. Look foward to your future videos.
What is the diameter or the fork on the Ridstar Q20 pro? The suspension tube diameter on the air fork for Q20 is 32mm, is the Q20 pro 34mm?
The neck part is a bit too big to go through the crown that comes on the q20 pro. I followed your instructions to the tee and the one you have on your link the shocks themselves meaning the long
Part with the air adjustment red air release button those two shock poles were noticeably thinner on the model you shared on link
The neck was a bit big didn't fit on the part that the stem that connects to handlebars was too big. Common sense tells me it's probably a 34mm. But I am looking all through the internet for the specs and can't find it
The specs for the one you have on your RUclips was easy to find but the q20 PRO all I find is the other 2 out of the 3 models. I have the 52v 40ah which is 2 batteries at 20ah each.
B Rich... great videos on the Ridstar q20.... I just got mine the other day and so far, so good. I love this thing. It looks good and is quick and powerful. I'm also looking to do the suspension upgrade you made it look easy. One question if I may... regarding the brakes my q20 the rear brake is operated via the left handle; and the front brake works from the right side handle...? this is opposite of all of the mountain bike and motorcycles I had through the years. Is that by design or a mistake? It will take a bit to get used to....
By design… having left handed rear brake is safer IMO as you can keep hand on lever and right hand twist throttles. This way in emergency you don’t have swith change from throttle to rear brake on the right side
Also either brake disables the throttle when pulled
@@douglasmason6742 All e-bikes what i seen have same reaction at brake. It's safety option
Hey, what do you think of moped style frame bikes, are they worth it over standard?
Yes because the seat is comfortable and they look cooler
Can you use any front fork that’s the same size as
Bolany fork linked in video has same size tubes which slide into factory crown and much easier install then most other forks are different size and stem is shorter needs some extra work ti get it to fit
Sorry I meant to say are they any other forks that fit that doesn’t require you to put air in them
i love the bike! what rear suspension is that?
Link to air shock and fork are in the description
I also think i might paint the battery white. Sitting in the sun at work it gets quite hot being black.
Interesting
I bought this very bike because of the video that I saw of you. Riding it through the off-road grounds.. I put the bike together. The screen flashed power for just a second and I cannot get it back on at all. Do you have any suggestions to get my Ridstar up and running? I would greatly appreciate your help. I do not want to send this bike back.
I had that happen the first time too. I had to make sure the battery is seated into the mount and locked, the. Turn the key on then hold the power button next to + / - If that doesn’t work request a new bike
Make sure the batteries themselves turned on and key turned on then hold power button on pad
don't the shocks use a schrader valve?
Yes, but shock pump needed as it a higher pressure 80-200psi
Where did you get it from? That air suspension??
See links in description under video
@@BRichSolution ok thank you sir
B Rich solution two weeks ago, I ordered the same. I only used for a week and it turns on fine but it won't start it doesn't want to run. I went to the bicycles mecanic and they told me that the controller and and throttle are damaged. Please I don't know if you can help me. what I can to do for my bicycles thanks
Reach out to manufacturer for replacement parts. I havd this happen on my Emoko c91 and received replacement parts. While the part arrive try replacing the throttle via amazon if it doesn’t work return it. amzn.to/3DQuVbh
Ridstar has some quality control issues, which makes sense they cut some corners on some of these parts.
@BRichSolution yes bro I see thanks for your help
@@BRichSolutionhow u reach out to manufacturers for this q20
Can you do a seat upgrade? Do the super73 seats fit on the ridstar?
not the super73 seat will not fit due to the V shape on the frame where the seat mounts on the Ridstar Q20 and Ouxi v8. The stock seat is comfortable IMO; it could look better
@@BRichSolution the super 73 Z miami has the same V shape on the frame. I wanted to get a stylish one to make it look nice. That one doesn’t fit?
I couldn't do the front upgrade to my Ridstar. My shocks only had 3 screws on one crown and the bottom crown has no screws and looks welded on. I couldn't slide them out so I took the entire front apart. The front fork upgrade you're suggesting the washers on the original fork wont slide all the way down in the middle, they get stuck before it hit the bottom. If you cant slide out the shocks this wont work.
Do you have the 15Ah battery version of Q20?
Can you attach a surfboard rack to it?
I believe so one like this amzn.to/3YtgoMq
Do you have any update after riding this for 4 weeks? Is the new ride with the new suspension significantly better? Do you even notice it? It looks like Ridstar already upgrades the suspension on their 2000w double battery version?
Ridstar Q20 is great bike for $1000. The Ridstar Q20 pro with dual battery and 2000w is not priced right see video ruclips.net/video/KPf2C8uzaVo/видео.htmlsi=9I8eh_JEWjGEg8G6
Hey rich I ordered the front fork from your aliexpress link and instead of sending me 32mm they sent 34mm any idea where I can find the right size?
Was 34mm Bolany brand or different? You can still use the 34mm fork you will need to replace the factory upper and lower crowns that come with crowns that came with the new fork
It was Bolany brand I ordered the one from your aliexpress link
Same thing for me.
What did you end up doing? @@RedEyesDragonYT
Can you do a video for how to replace the half throttle with full twist throttle? I have the same bike and I want to change the twist throttle. I have no clue how to replace the twist throttle.
If you want a full throttle do the reverse of this video ruclips.net/video/T5ZfQZTP04U/видео.html and buy this throttle amzn.to/45GEBkR
will it turn on without the key? @@BRichSolution
what happens if you don't connect the 2 pin that's attached to the controller
the 3 pin is attached to the throttle and the 2 pin is used for turning on the bike. Can you please help? Im lost. @@BRichSolution
BRS great video!
Where to find this upgrade part's ?
Thanks for video!
See in the description under video for links to products used
I received my q20 3 1/2 weeks ago and already have 1000kms on it
Replaced the stock seat with a mini bike seat as after 4-5 hrs a day of riding I found yhat my butt got really sore
Planon buying a 2 more batteies and mounting them on the cross bar on the front
I would consider selling the ridstar and buying Yolin duel or triple battery instead of modifying Q20
Nope quite happy with my purchase
I’d like to see a video of u installing a second battery if possible ! :)
Okay
So I just put a battery in a bag hanging off frame gotta figure out connecting both tho
Hi there. Love your videos. I just got my Ridstar a few days ago and was wondering if I was to upgrade suspension. Would it be best to do rear first
I’m on a budget. Just wanted to know what you think is most important
Also I’m in Canada wanted to know what you think of DNM AOY-36RC 165mm MTB downhill rear shock? I lick on and off road. Also shocks first or tires? Thanks
See suspension upgrade video i made
I would run the stock tires down and upgrade to DMN or A5 air shock first
@@BRichSolution thanks very much. I did watch your suspension videos. I’ve actually watched all of your Ridstar and several others. I even used your assembly video to setup my bike. So happy to have found your channel. A huge help👍 so rear shock it is then
I just wasn’t sure which was most important upgrade but feel the rear is almost hard tail stiff with stock
@@BRichSolution I’m also 6ft tall and was thinking of maybe taller bars but not sure if the harness has enough length. Do you think there is room to go higher or would I need some kind of wiring extension
wich one ist better the q20 or engwe M20?
Q20 1500 with 20Ah battery is much better: faster, hydraulic brakes, bigger battery and more comfortable seats amzn.to/3OpYRAX
At 6’2 I’m kinda at the top end of riders height wise per this bike specs. I do sit all the way back which helps. I am having a blast riding but Any tips which shock or mod can get my max ride height increased?
Install 200mm or 190mm air shock s.click.aliexpress.com/e/_Dk1F66B
Do i need 26inch or 20inch for fork????
20” fork
awesome video like always is there a controller upgrade?
Not sure.. bike is pretty solid with 22A and does 31 mph. 25A or 30A controller will only get ya 1-3 mph but range will be shorter
how much do you weigh? i just brought all this as wel :)
170 lbs
my controller settings only went to setting number 8 can,t raise my amps
Do you have 20Ah battery with M5 display or 15ah battery version with smaller screen? M5 screen is easy to source
amzn.to/3Ir0laK
Do you have the 20 inch or 26 inch
20inch
26inc is heavy
Does anyone knows what the max size on a rear shock is for this bike I found one that's 230x65 does that fit
It will fit and might make the trailing arm angle down… but its its air shock you can adjust the compression to your liking
how was it? I’m considering getting the DNM Burner-RCP 2S but don’t know which size 190mm or 220 or 240? Any tips?
Bike wet planing on buying it for joy riding
Good choice
@tomruotsalainen5909 Which mini bike seat?
Ok
I followed this video & my rear air shock won't budge... the o ring stays at the top & doesn't move at any psi. I'm starting to think suspension doesn't exist with this bike.
Wish i never bought the pump, shock, bike, or the rest of the other crap, but I'm in Ireland, so im now stuck with this shite!!!!!
the stock rear shock is not air shock and is junk. The one I replaced moves so long as you set psi to 60 psi per chamber
@BRichSolution I bought the same air shock in your video for the rear & it isn't budging at 60 psi both cylinders
Mine arrives start of September no shipping fee
Great
I bought the same suspension from your link and it didn’t fit
What didn’t fit? Front fork or rear shock?
The fork
Man i kinda want to get rims when I do this.
Ok
Rear shock will be my first upgrade. In hindsight, would you stay with the 165mm or consider going to the 190mm?
Thank you for the Ridstar videos.
165mm is stock size, buy 190mm might be better option especially if you want to raise the seat slightly or really soft ride
Can you please send me the link for u he folks
All the links are in the description below under video but also posted below for your convenience
Link to Front Air Suspension on Amazon: amzn.to/47hWuYH
Link to parts on AliExpress:
20x4 Front Fork: s.click.aliexpress.com/e/_DEM8Nu5
Rear Air Shock 165mm: s.click.aliexpress.com/e/_Dk1F66B
Shock Pump: s.click.aliexpress.com/e/_DdIPe3t
Lol ridstar...i pronounce it ride star because that had to be what they meant.
Yes
LET ME BUY ONE OF YOUR BIKES =D
okay
Do not buy this bike no customer service cost $450 to ship back no replacement parts
Sorry to hear that. Did you buy from amazon or aliexpress? I had issue with ridstar folding bike last year and sent me replacement part no problem
@@BRichSolution Amazon
Oh I’ve bought from Aliexpress
Saying this I first bought from a UK firm who turned out to be a scam and lost £1500! Aliexpress was cheaper and should have gone to them first
I bought this bike and the rear motor cable got severed and I contacted the seller and I was able to buy a brand new rear motor and all the hardware, the people were nice and really helpful on getting my new parts too
Hello I have ridstar Q20 Pro what forks your recommend to change it easy?
Bucklos or Bolany air forks