iPhone 11 Pro No start, Not charging, Shorted capacitor - Advanced Motherboard Repair

Поделиться
HTML-код
  • Опубликовано: 14 окт 2024
  • Here i have an iPhone 11 Pro that is not charging and not start. After initial measurements i found out that it has a short on PP_VDD_MAIN.
    I split the motherboard and i found a shorted capacitor - C407_K.
    I removed the bad capacitor and now the phone is back to life.
    Some of the tools and supplies i use all time
    Sugon T26 soldering station with JBC C210-018, JBC C210-002 and JBC C210-020 tips
    Quick 861DW Hot Air Station
    Gordak 952-A (I'm using this only for it's soldering iron)
    Seek Compact XR Thermal Camera
    UNI-T UT171B Multimeter
    HY3005D Power Supply (very old)
    Kingbo RMA 218 Flux
    Baku BK-227 Flux
    Cynel Soldering Wire 0.5mm and 0.7mm
    Mechanic XGS40 158C Solder Paste
    Relife RL-404 138C Solder Paste
    Like and subscribe if you enjoy the video

Комментарии • 11

  • @Sherifone78
    @Sherifone78 20 дней назад

    as you mention, Making video about preheater will be gr8 idea too.

    • @PhoneRepairRO
      @PhoneRepairRO  20 дней назад +1

      @@Sherifone78 preheater video is in the making, but i don't have time :))! As you can see the last video i posted is about 2 months ago, and man, i have so many videos to post....

    • @Sherifone78
      @Sherifone78 20 дней назад +1

      @@PhoneRepairRO subscribed, waiting for other videos too, you have gr8 videos.
      1 advice to raise your viewers. Its hard maybe bur Air and Temp is very important if they are described on videos. Thanks

  • @Sherifone78
    @Sherifone78 20 дней назад +1

    Hi, gr8 video. Short Question: Which multimeter or way do you use to display on screen?

    • @PhoneRepairRO
      @PhoneRepairRO  20 дней назад +1

      @@Sherifone78 hello!
      Multimeter is one from UNI-T UT171B with usb connection!

    • @Sherifone78
      @Sherifone78 20 дней назад

      @@PhoneRepairRO thank you!

  • @khanhvan9t717
    @khanhvan9t717 Год назад

    Wonderful

  • @yourclips9974
    @yourclips9974 Год назад +1

    teach us how to make diy board preheater?

    • @PhoneRepairRO
      @PhoneRepairRO  Год назад +2

      Hi,
      All you need for a preheater is 1x REX-C100 temperature controller with 1x K temperature sensor, 1x heatning element ( www.ocamaster.com/userimages/2019-05/1557418811.jpg ) and a big piece of aluminium ( 10-12cm long x 5cm wide x 2cm thick ).
      In the middle of aluminium piece you drill a hole for heating element, then on the opposite right or left corner you drill another hole for the K temperature sensor.
      If REX-C100 temperature controller and K temperature sensor are good quality, you dont need any calibrations.
      If i have time, i will make a video about this.

    • @yourclips9974
      @yourclips9974 Год назад

      @@PhoneRepairRO we'll waiting for that

  • @extreme_computerssrl6669
    @extreme_computerssrl6669 Год назад

    Unde se poate aduce/trimite un Iphone 12 Pro care nu mai incarca (a fost folosit un charger ieftin)? Imi puteti lasa niste date de contact? Multumesc.