Great job I also ordered those wheels for mine, gold color too. Right now I running 2.2s brass hex extenders and a set of tusk LPs 1/4 inch taller than stock. Oh ps I own the gray one upgraded G13 servo. Thanks for the videos my friend 😄👍
That's pretty darn awesome, I gotta get one of the winches! I installed the same wheels last night (identical truck and wheels), looks pretty jazzy. First time using beadlockers so it took a few to figure it out. Also installed the diff covers, not a worthy upgrade imo if you have the skid plates, the weight is good but it's a fiddly install imo. Great work as usual!
Thank you! I have been debating on the diff covers and aluminum axles for a week now. I may end up getting them but this rig is SO heavy already that its almost 1/7 scale in size AND weight now lol
Yep love the wheels I have the grey body so got the siver wheels, yep lots of screws. Glad I subscribe to you as I was at a loss as to what winch that would closely match the size of the Jeep, also this is my first trail crawler as I have only 5th scale gas x6 1/7th on road x4, x2 1/7th offroad along with x1 6th scale offroad an ancient HPI Savage with collectable quad body and rider along with an old Venom 1/4th VMX450 motoXbike along with a few VTOL's and drones. I had also been hunting for alloy wheels so yep good old Rlaarlo, I still would like another choice of tyre and was wondering whether the LOSI Rock Rey tyres/wheels might fit but I did buy a set of the MK07 tyres so I did not have to split the others ao I might paint one wheel for a spare as not liking the maxtrax as way too short tried the ones fitted to my 30degrees North SDT Trophy Truck and they are too long so I either cut and shut some either stock ones or the SDT items, did you reset the steering throw I have not yet as I have a more powerful faster servo for the steering. I also got all the brass weights aloing with the alloy axles front and rear a couple of spare bowden cables for the diff lock as I have seen on YT that a couple have damaged them. Keep up the good work off to order a winch I noticed that there is a port on the receiver for a winch so maybe you can wire straight there and not have to order the remote one less thing to lose or forget to pack.
Killer upgrades brother. I have all the same done to mine except the winch. I need to get one! I also installed the HW Axe system along with Micky Thompson Baja Pro X tires. NSDRC RS700 comes in tomorrow! I think you’l like the brass diff covers and aluminum axle housings the offer as well. Cheers brother!! You’ve inspired me to do a video on all the parts Ive installed.
@@TheDudeRchaha yeah it is pretty dang heavy haha. I like it it’s so planted. I did 60wt shock oil and replaced the bottom seal with double 0-ring. Gonna test it out to see if that stops the shocks leaking. All mine leaked bad out of the box. I give mad props because they have been making all the issues right through warranty process and they’ve been very responsive.
People give Rlaarlo a lot of crap but I have to say, I am impressed with how they handle their warranty stuff. They are always willing to help which is great to see on such a young RC company.
Hard work installing the wheels, but it was worth it! The gold one matches the green body perfectly. The winch looks great and works well-very cool! 🥰
Great Video.. I learned a lot
Very cool! Wheels look great and that wench is awesome!
Thanks 👍
Great job I also ordered those wheels for mine, gold color too. Right now I running 2.2s brass hex extenders and a set of tusk LPs 1/4 inch taller than stock. Oh ps I own the gray one upgraded G13 servo. Thanks for the videos my friend 😄👍
Love mine wanting to go to a 5.9 tire
That's pretty darn awesome, I gotta get one of the winches! I installed the same wheels last night (identical truck and wheels), looks pretty jazzy. First time using beadlockers so it took a few to figure it out. Also installed the diff covers, not a worthy upgrade imo if you have the skid plates, the weight is good but it's a fiddly install imo. Great work as usual!
Thank you! I have been debating on the diff covers and aluminum axles for a week now. I may end up getting them but this rig is SO heavy already that its almost 1/7 scale in size AND weight now lol
Yep love the wheels I have the grey body so got the siver wheels, yep lots of screws.
Glad I subscribe to you as I was at a loss as to what winch that would closely match the size of the Jeep, also this is my first trail crawler as I have only 5th scale gas x6 1/7th on road x4, x2 1/7th offroad along with x1 6th scale offroad an ancient HPI Savage with collectable quad body and rider along with an old Venom 1/4th VMX450 motoXbike along with a few VTOL's and drones.
I had also been hunting for alloy wheels so yep good old Rlaarlo, I still would like another choice of tyre and was wondering whether the LOSI Rock Rey tyres/wheels might fit but I did buy a set of the MK07 tyres so I did not have to split the others ao I might paint one wheel for a spare as not liking the maxtrax as way too short tried the ones fitted to my 30degrees North SDT Trophy Truck and they are too long so I either cut and shut some either stock ones or the SDT items, did you reset the steering throw I have not yet as I have a more powerful faster servo for the steering. I also got all the brass weights aloing with the alloy axles front and rear a couple of spare bowden cables for the diff lock as I have seen on YT that a couple have damaged them.
Keep up the good work off to order a winch I noticed that there is a port on the receiver for a winch so maybe you can wire straight there and not have to order the remote one less thing to lose or forget to pack.
Killer upgrades brother. I have all the same done to mine except the winch. I need to get one! I also installed the HW Axe system along with Micky Thompson Baja Pro X tires. NSDRC RS700 comes in tomorrow! I think you’l like the brass diff covers and aluminum axle housings the offer as well. Cheers brother!! You’ve inspired me to do a video on all the parts Ive installed.
I am still debating on the aluminum axles and brass diff covers. Thing is already so heavy though! LOL
@@TheDudeRchaha yeah it is pretty dang heavy haha. I like it it’s so planted. I did 60wt shock oil and replaced the bottom seal with double 0-ring. Gonna test it out to see if that stops the shocks leaking. All mine leaked bad out of the box. I give mad props because they have been making all the issues right through warranty process and they’ve been very responsive.
People give Rlaarlo a lot of crap but I have to say, I am impressed with how they handle their warranty stuff. They are always willing to help which is great to see on such a young RC company.
Sorry but does anyone know how to reverse the "SWB" switch, seems like it would be more intuitive?