Mazda 3 2020 solution on the Aircon Issue
HTML-код
- Опубликовано: 2 окт 2024
- I discovered the technique on how to adjust the aircon system of #Mazda 3 2020. I just observed that its not cooling well before but after adjustment, it becomes ok and the aircon is now very cool. Watch it to learn how to do it
Happy father's day, Sir Levi! Thank you for your vlogs. Very informative.
Thank you
Wow, thanks sir Levi! Very helpful. Will try this later. Galing!
Done with the reset. Nice nga. 25 feels like 22 now. Thanks, sir!
Can someone summarized… i cant watch the 8 minute video… im sure this can be explain in 1 minute…
Yung chevrolet cruze ko 2019 model ganto din ata sir levi pero de susi siya pano kaya gawin to
Very helpful Sir Levi. Watching all your Mazda vlogs as I recently bought a Polymetal Gray one. 👌
Great job Mr Levi. I see you press windshield defroster and ac on/off buttons at the same time and also press the engine start button twice. This switches the temperature into 25 C automatically. I did it on my vehicle and will test it if this creates a difference on a hot day like above 35 C.
What
thanks a lot sir levi, dami ko natutunan sayo. mazda 3 owner din po ako, lge kita pinapanuod ksi nkakalito na ang features ngayon maxado na high tech. godspeed po..
Hi sir. Saan link niyo po napanood sir? 2017 po kasi cx5 ko walang on button. +/- lang
happy father's day po sir 😊
Thank you
G'day Levi.
I just wanted to say, "Thank you very much," this has made a huge difference to my air conditioning efficiency. What you've done by using this procedure is shift the temperature range from 15 to 29 degrees Celsius, to 18 to 32 degrees Celsius. 18 to 32 used to be correctly specified for Asia-Pacific cars - Australian spec here - so I'm at a loss as to why the European/North American temperature ranges have been used on cars in Australia and other Asia-Pacific countries.
With the setting on Lo, before adjustment, and using the fan speed manually, the air conditioning compressor isn't cycling as much - it's like an 'economy' mode. That's great for colder regions like Europe and North America. It's inadequate for Australia and other Asia-Pacific countries.
Again, thank you for your video!
Pero Temperature is Definite. Meaning, 21c is 21c anywhere in the world. There must be something deeper wrong there
Can someone helps to translate into English on the steps?
See my answer in previous comments
Thank you! It works!
Great tip! Might try it on my car however I am always at 25~26c and still very cold haha!
May I ask if you are from Singapore? Thank you for the video.
I just did this on my 2020 Mazda3 and it changed it from 60-85 degrees to 65-90 degrees range. Is there any way I can undo this? 😅 I certainly don't need to go above 90 degrees..
Just do the same steps to reverse
Naalala ko ganyan din issue ng Mazda Astina ko noon.
Same mazda astina owner din po ako pop up head light
Happy fathers day Sir Levi! 😁
Thank you
Hi do you mind giving the steps in English. Thanks
@Rusdy Husin 1. first you start the engine and then switch on the aircon 2. Shut off the engine but leave the aircon in the on position, 3. Dont step on the brake pedal while doing the procedure , 4. Press the start button 2x in accessory mode to check your current aircon setting 5. press the start button slightly in accessory mode to switch off the aircon setting, 6. Press the aircon on switch and the defogger button at the same time and hold on to it, 7. Then press the engine start button 2x while holding on to the aircon on button and defogger switch at the same time, 8. Its done.. you can see the new aircon setting
@@ridewithlevi6418 alright Thanks Levi! Will try again 🙏🏼
Thank you sir Levy for this very informative tip for A/C adjustment of 2019/2020 Mazda 3.
Wow, Akala ko, magka iba lang temp sensors nang mazda at honda, because I have the same observation. But after doing this procedure, pareho na sila. Thank very much for this info, may you get a million views!!!
Hi sir Levi, this is very informative! I was wondering where I can read more life saving hacks for Mazda 3 as I can't find much online 😁 cheers!
Boss may remote start ba or mazda genuine part for to install?
Why has the temperature increased from 22 to 25 but you say that this procedure make it blow cooler?
At 22, its not yet cool but after the set up it became 25 and its cool already, which means that if i go now to 22 , it will be cooler
Sir paano i reset ang sa montero
I made it to my Mazda 3 2020. 25°C is so cool now! Thank sir!
Nice car review informative and could help a lot to mazda owners :-)
Mazda 3 2020 not working… nothing happened… temperature is not changing
Bago lahat happy fathers day po sir. Very helpful po yan sa mga ka mazda 3 nyo. Ang tanong ko po since naadjust nyo yng lamig ng 22deg. nyo to 25deg. pano po yng coolest setting nyo halimbawa 15deg. ang mangyayari po ang migiging coolest nyo nalng is 18deg?
Not sure, hindi ko pa na test
Hi Levi, I have a question, does your solution improve the cooling capacity of the AC (air conditioner set to Lo before/after adjusting the settings)
I think it does, what i observed is that its cooler now than before with the same setting
@@ridewithlevi6418 I tweaked the settings and adjusted the AC to 23 degrees, it is even colder than "Lo" based on the original settings. Thank you for your valuable instructions.
@@ridewithlevi6418 FYI - it also works on 2021 Mazda 3
Id watch but you keep speaking non english so it's just blah blah
Boss, naka tint ba yung front windshield ng mazda mo?
Yes naka full tint sya na clear with green shade
thank you sir Levi!
Sir pwede nyo ba i compare yung light ng mazda3 sa montero kung pareho lang ba sila ka liwanag given na may foglights ang montero at ang mazda3 ay wala?
Will check
Tama ka sir,sa Montero aircon setting kahit 25 lang malamig na talaga siya.
Applicable po ba to for my mazda 3 2016?
Not sure po
Gumana po ba?
Tutorial po sa montero
Sir pano naman po ibalik sa dati ? Like ireset? Yung rear side naman po ba ihohold?
Nevermind i figured it out, just repeat the steps to bring it back.. i doesn't do anything but change the number of the lowest temperature on the screen. ( im in the US, 60F was my "Lo", after the steps i t became 65F... so it didnt really make your climate control cooler .. just the number on your screen basically.
@@jerremiegabriel1503 Same here!
What is the aim for this, to make colder or hotter?
Make colder
Boss question lang anong gmit mong tint?
X film ceramic tint
Confusing. During the second step 22 deg, ano po ibig sabihin nun? Then when you reset sa 3rd step, nasa 25 deg na? Ang logic ni Mazda is 22c = 25c? And by completing Step 3 na re-reset siya para maging 25c = 25c na?
The logic is 22c=25c so mas malamig na pag 22c than before
@@ridewithlevi6418 Sir, ibig sabihin mas malamig yung 25C sa Europe kesa sa 25C sa Philippines? Di ba dapat parehas lang yun?
Pano po kaya sa mazda 3 speed? Pag pinatay sasakyan naka neutral nag aalarm na mali daw un gear
Dapat i shift nyo to park
Ginawa ko na po siya pero di po siya unaakyat sa 25 pang inistart ko ulit haha
1. first you start the engine and then switch on the aircon
2. Shut off the engine but leave the aircon in the on position,
3. Press the start button 2x in accessory mode to check your current aircon setting
4. press the start button slightly in accessory mode to switch off the aircon setting,
5. Press the aircon on switch and the defogger button at the same time and hold on to it,
6. Then press the engine start button 2x while holding on to the aircon on button
brillant!!!
ok sir it worked on me!! Thanks
Good
Just tried that to my Mazda 3 sir Levi. Sobrang lamig na ng aircon ko after trying this out haha. Happy father’s day sir💪!
Great, thanks