The wheels, internals and controller of this truck are identical to the Feiyue FY-07. So for Eachine they Frankensteined an FY-07 with a FY-03 body. Tip for the on/off switch: glue/tiewrap it to the battery tray and you will no longer have to unplug it when you open the body.
same as Virhuck V-01 and other WLtoys 12428 clones of course, unstable turning rolling and flipping they're much better suited to gearing down into the dirt to be a crawler/bouncer for trail running, softening the shocks and 10t pinion does it nice.
@@modelnutty6503 It's not the same as the wltoys...The gears Pitch are different, dogbones..ect. i got bunch of vithuck for $40-ea years ago and a fy03 for $46...converted them to brushless 2845 3300kv $12.. Might as will get a brushless..it cost the same to replace the 390. The WLTOYs has 550 motor. 60a esc $15, MG servo $7, rx$7..a 2200 mah 35C will make it do a back flip from a stand still.Pop wheelies on command.it's do 45-50 Mph..EASY...just get oil shocks $12. lower the springs, lower the battery tray....14mm hex 1/10 wheels/off road wheels are only $12 p/set. hex extension are only $7 p set. metal drive line are only $7... you only need the rear. I just mounted the wheels and tires from the KT-12...hex extensions. I have them all different configurations and One stock. You can build a little 50mph beast for $120 if you know what ya doing. Then again i've only paid $115-$130 for all my 1/10 brushless trucks.lol It;s not a big deal...I get use 1/8 rollers for $100.slap in 4076-4092 120a-150A ($80-$100)..make those go 50mph too. Lipo are also getting cheaper. You can get 2s 5000 mah 50C for $12. it's the 5000mah @ 50C...it's like running a 3s 25.lol Even that out runner is little....( 2217) you can get a 2220 2700Kv for $7, now. Out runner ARE NOT WATER PROOF.
It is a nice looking vehicle but I will not buy another eachine vehicle ever again due to the lack of parts and their customer service SUCKS! If you cant find the parts or something of theirs there is no way to contact them AT ALL. This vehicle, however, will be easy to find parts for due all the different types of them out there. nice video Phil keep up the good work my friend.
Couldn't be bothered to read through all the comments to check wether someone has answered your question. But just in case nobody else has, those blue alloy spare bits and pieces you mentioned are a wheel spacer kit. 👍 Merry Christmas sir! 👍
The blue parts are extended hex to stop the car rolling in corners. But that brings a lot of stress to the bearings in the steering hub. So don’t use them. Du you still drive the fy03?? Other brands same car. 1.Amewi Metal Eagle 2.Echine 3. Highlander 4. WL-Toys (that is a little bit different and no metal cover. I think there are more. 😂 I love my metal Eagle, und put a lot of upgrades on it.
My red brushless FY03H was delivered yesterday. I haven't run it yet because I've been too busy drooling over it. It's gorgeous 😍 I'm still waiting for the hop up dampers and front & rear light kits. I wonder if the black panels will be available to buy separately. I'm going to get a set of red ones in case mine get damaged, and I would like the black ones too for a change of look. They're nice and cheap. I also had a WLtoys 12428 delivered yesterday which I won on Ebay for £27. It was listed as spares and repair and came with two batteries and usb chargers. The motor turns the props, but the wheels don't turn. So I'm guessing it needs new diff gears in both axles. The rest of it is in excellent condition with only minimal scrapes on the bottom. My grandsons can fight over that while I play with the FY03H 😄😄😄 postimg.cc/sGVStNfV & postimg.cc/rdNwvFDr Have a great weekend Phil 😊👍👍
Great honest review thanks. If I wanted to see it jump a ramp off 80ft building while falling through rings of fire only to land in car park with a wild grizzly, I would have watched Kevin
My missus bought me one for Xmas but the most bizarre thing it has no on or off switch...it’s perm on love it.... extenders make it a lot more stable I think... great vid dude 👍👍👍👍👍
Yeah like others have mentioned there extenders but dunno if its camera angle but they look huge. Probably for to fit larger offset monster truck rims so now fouling on the chassis!
Probably a central manufacturer that brands and builds to order. I'd bet that if anyone bought enough of them, they could spec them whatever way they wanted and the company would custom brand them as well. Many, many CN manufacturers use that business model. Edit to add: Lol, seller references this video in the product description.
It's about time they made a version with seperate rx and esc. However, I just ordered the ¹/¹⁰ scale 10428B and I'm gonna be slightly upset if Eachine makes one...
Suprised you didn’t mention that its almost exactly the same as the vaterra twin hammers that came out like nearly 10 years ago but just a cheaper version
My 04 arrived quickly. Your review helped. I have the brushless one. Tge shocks are one pice plastic. I did get lil shocks and metal rod replacements. Will like to buy the wltoys light kit for it. Im trying to find if it has a standard size servo. I have a flysky setup and goolrc brushless system for it.
Holy moly! its identical copy! except i didnt get the wheel spacers XD with the FY03. !! When are we gonna see a "Tomley RC Desert Truck" :D change the color or ad a single part and you got your own brand!
I used axle exenders like that on my FY03. It does help with rollovers although there's only so much you can do with that design, it's not a touring car! In theory, using them will put more strain on the bearings but who cares? Bearings are cheap and in any case, an RC car is very light compared to the loads those bearings are designed to take. I haven't noticed any premature wear since fitting them.
Is it possible that manufacturers are fleeing Traxxas? I know the Vaterra version had push rod suspension and a 2 speed transmission. They went after Arrma for the push rod Suspension and diff lock features Nero platform. Its my assumption that Vaterra might have been warned prior to discontinuing this model? Nevertheless this platform has intrigued me from the beginning. Cheers
Hola amigo feliz año...!!!! Excelente opción de rc crawler.... te pediría que también lo pongas a comparar con el "clásico e inventor" de este tipo de auto me refiero al ya clásico wltoys 12428, ( en lo personal yo conservo uno) una comparativa de estos 3 sería cool, saludos desde México.... 👍👍👍👍👍
Hi Phil! Excellent straight-talking review as per my friend. Loved the bash footage and the fun game of tag at the end. I have been watching your other vids, but had to comment on this one to wish you a very happy and prosperous New Year! Have a great 2020! All the best from Mark :-)
Thanks Mark, I watch loads of others videos but quite often forget to comment, or have the video playing on my TV.... Hope you had a good Xmas and NY, lots more Tamiya's for 2020 I hope! My mate wants that Quattro you are building.... I keep trying to get him to buy one!
@@TomleyRC All good here thanks Phil! Yeah I watch a lot on the TV late at night when the missus has gone to bed! Hopefully some new Tamiya kits for me this year, not sure which at the moment. Yeah, the Quattro A2 is a little beauty - trying to muster the courage to start applying those darn stickers! :-)
There are no patient laws in China so to be copied is seen as an honor, and which is why you'll see the same model under many different brands with slight changes here and there
Actually in china there are business model like this is, there's one design company, they do design and probably has the factory to produce it, and then any clients/brands can order and customize the color, branding, etc..
The center of gravity seems too high. It can hardly turn in high speeds without flipping over. The distance between the wheels should have been longer, like a truggy.
True it rolls at high speed in the corners. But if the driver has got some good throttle control skills and not just operate the throttle trigger like it was an on/off switch (i.e. zero throttle/full throttle) this can easily be avoided by reducing (some) throttle in the turns, it also makes for a much much nicer run with almost zero flips. It is an aquired skill which comes with patience and practice. After all, that is why proportional speed controllers were invented for :-)
Please can someone help me. When you turn on the rc with the wheels turned it turns them straight again ok? Mine thinks that all the way left is straight. When I start with my wheels straight it turns it left all the way because it thinks the wheels are pointing right. When I try to turn all the way right the wheels are straight. This is absolutely frustrating and I need help bc I don’t know how to fix it.
#philisonfire2020 . great unboxing & 1st run video. you did the rc proud mate. keep em coming buddy!! and if you ever want to know why the one who shall remain nameless( rhymes with seven talbot) doesn’t talk to me anymore , go to my channel and search “3 reasons why kevin talbots cool” hopefully you will find it funnier than he did. happy new year
Awesome review and bashing, dude! 😃 Yeah, Eachine has some products that they seem to make - or some company makes exclusively for them - and rebrand a lot of stuff. Their box goggles are really good, though. 😊 Happy new year!
How come you copied kevin’s channel when you dropped the rc on the table I watch both your channel’s for my entertainment and now there’s RUclips gossip that you guys are fighting from a post kevin made?
I wouldn't worry about the 'Kev' drama, he does it for attention. I've been testing and reviewing RC's longer than him, I often drop them in slow mo to show the suspension. I must admit though, after editing and uploading this one I did notice that the fast cutting of the tie wraps mixed with the dropping it on the table was pretty similar... to much work to change it and re upload though. Anyway, cheers for watching..... "SUBSCRIBE" . haha
Tomley RC you have been testing RC’s longer 😂🤣😂🤣 what a petty claim to fame hahahahaha you are boring as bat shit and your monotone voice is a snooze fest you are a passive aggressive douche like a 12 year old, grow the fuck up and stop promoting the shit Chinese products you quite clearly sell, sell out.
mattysixx Kevs just reviewed this RC...go give him some shit as well 😂...or is it ok because he gets over excited all the time and is not boring like me? Asking for a friend?
I don't copy Kev..... well, apart from we both review cheap RC's. Seen his mini Grave Digger?.... go check out a video I made months ago and then tell me I'm copying him haha
they are pretty much ripping off feiyue.....sure feiyue doesnt make the best cheapo rc cars, they break alot. everything is the same. EVEN THE TRANSMITTER!
Great little buggy. Very fun to drive and bash around. It's a bit small but it just makes it's way over the tough terrain with ease.
The wheels, internals and controller of this truck are identical to the Feiyue FY-07. So for Eachine they Frankensteined an FY-07 with a FY-03 body. Tip for the on/off switch: glue/tiewrap it to the battery tray and you will no longer have to unplug it when you open the body.
Yes, it's also the same as the FY03H. Good tip about the switch 👍
Not a surprise really. My Virhuck V01 is the same as the Feiyue and is exactly the same right down to the TX
I carry the smallish FY03H in a small backpack when hiking, along with two 2700 2S lipos. And the beach hikes are even better now.
Sounds cool! They are nice trucks
Great
Mine keeps on cutting out do any of you know a fix?
@@Mouse-dd7dn Try another BATTERY
@@ianmangham4570 I got it like 2 days ago but it takes 30 mins for it to run out and like 5 hours for it to charge is that normal?
same as Virhuck V-01 and other WLtoys 12428 clones of course, unstable turning rolling and flipping they're much better suited to gearing down into the dirt to be a crawler/bouncer for trail running, softening the shocks and 10t pinion does it nice.
Yes, these make good rock bouncers
oh.. move the steering ball to the inside hole of the servo arm, doesn't limit steering too much, gives steering lots more torque tho.
@@modelnutty6503 It's not the same as the wltoys...The gears Pitch are different, dogbones..ect. i got bunch of vithuck for $40-ea years ago
and a fy03 for $46...converted them to brushless 2845 3300kv $12..
Might as will get a brushless..it cost the same to replace the 390.
The WLTOYs has 550 motor.
60a esc $15, MG servo $7, rx$7..a 2200 mah 35C will make it do a back flip from a stand still.Pop wheelies on command.it's do 45-50 Mph..EASY...just get oil shocks $12. lower the springs, lower the battery tray....14mm hex 1/10 wheels/off road wheels are only $12 p/set.
hex extension are only $7 p set. metal drive line are only $7...
you only need the rear.
I just mounted the wheels and tires from the KT-12...hex extensions.
I have them all different configurations and One stock.
You can build a little 50mph beast for $120 if you know what ya doing.
Then again i've only paid $115-$130 for all my 1/10 brushless trucks.lol
It;s not a big deal...I get use 1/8 rollers for $100.slap in 4076-4092 120a-150A ($80-$100)..make those go 50mph too.
Lipo are also getting cheaper. You can get 2s 5000 mah 50C for $12.
it's the 5000mah @ 50C...it's like running a 3s 25.lol
Even that out runner is little....( 2217)
you can get a 2220 2700Kv for $7, now.
Out runner ARE NOT WATER PROOF.
It is a nice looking vehicle but I will not buy another eachine vehicle ever again due to the lack of parts and their customer service SUCKS! If you cant find the parts or something of theirs there is no way to contact them AT ALL. This vehicle, however, will be easy to find parts for due all the different types of them out there. nice video Phil keep up the good work my friend.
Cheers dude.... luckily because they just rebrand stuff, you just have to find what the original car was.
Couldn't be bothered to read through all the comments to check wether someone has answered your question. But just in case nobody else has, those blue alloy spare bits and pieces you mentioned are a wheel spacer kit. 👍 Merry Christmas sir! 👍
Yes, worked it out in the end anyway. Merry Christmas dude
Wheel extensions to help with rollover , great review love your stuff
Yes, I worked it out after doing the video.... I will do an with and without comparison
The blue parts are extended hex to stop the car rolling in corners. But that brings a lot of stress to the bearings in the steering hub.
So don’t use them.
Du you still drive the fy03??
Other brands same car.
1.Amewi Metal Eagle
2.Echine
3. Highlander
4. WL-Toys (that is a little bit different and no metal cover.
I think there are more. 😂
I love my metal Eagle, und put a lot of upgrades on it.
those pieces you mention are wheel hub extensions. put them on my virhuck v01 to keep from rolling all the time.
Yes, realised after doing the video
I like the black more than the feiyue silver, the trick is definitely really cool, lol even though it’s a rebrand.
Yes, black looks good doesn't it
Hi tg them extra bits are wheel extenders for putting bigger wheels on
Yes, going to test them soon...
My red brushless FY03H was delivered yesterday. I haven't run it yet because I've been too busy drooling over it. It's gorgeous 😍 I'm still waiting for the hop up dampers and front & rear light kits. I wonder if the black panels will be available to buy separately. I'm going to get a set of red ones in case mine get damaged, and I would like the black ones too for a change of look. They're nice and cheap. I also had a WLtoys 12428 delivered yesterday which I won on Ebay for £27. It was listed as spares and repair and came with two batteries and usb chargers. The motor turns the props, but the wheels don't turn. So I'm guessing it needs new diff gears in both axles. The rest of it is in excellent condition with only minimal scrapes on the bottom. My grandsons can fight over that while I play with the FY03H 😄😄😄 postimg.cc/sGVStNfV & postimg.cc/rdNwvFDr Have a great weekend Phil 😊👍👍
I've just seen you can buy the complete FY03H body cage and panels in red for £16. No brainer 😄👍👍
£16! Thats a bargain! Although not as much of a bargain as the 12428!
Great honest review thanks.
If I wanted to see it jump a ramp off 80ft building while falling through rings of fire only to land in car park with a wild grizzly, I would have watched Kevin
Jumping a Great White Shark next week, just fitting the 200mph motor first 😎🤘
LMAO, Skate Park trashing, ROFLMAO
Mine keeps on cutting out do any of you know a fix?
@@Mouse-dd7dn try n find an old WLToys esc if you’ve parts left from brushless conversions?? N drop it in? 👍
@@Andym1159 ok thank you
My missus bought me one for Xmas but the most bizarre thing it has no on or off switch...it’s perm on love it.... extenders make it a lot more stable I think... great vid dude 👍👍👍👍👍
Cheers dude.....Strange it has no on/off switch! its not under the body is it?
No dude you just switch on the remote on off it goes iv looked everywhere 😂😂😂😂
Yeah like others have mentioned there extenders but dunno if its camera angle but they look huge. Probably for to fit larger offset monster truck rims so now fouling on the chassis!
Yes, I finally worked it out after filming. They are very wide!
The blue ones are axel extenders for it to not tip over so fast u can put them on
Hi, can you review some fast cheap offroad Rc s? Thx
Feiou and Eachine pxxs in the same place. one will do one thing then the other will up- grade. they have been doing this for years. great vid.
Thanks dude
I like the TX key for unlocking Child to full Man Child mode👍
Yes, makes it a bit easier for inexperienced drivers
Probably a central manufacturer that brands and builds to order. I'd bet that if anyone bought enough of them, they could spec them whatever way they wanted and the company would custom brand them as well. Many, many CN manufacturers use that business model. Edit to add: Lol, seller references this video in the product description.
Yes, you are probably correct. 😎
It's about time they made a version with seperate rx and esc. However, I just ordered the ¹/¹⁰ scale 10428B and I'm gonna be slightly upset if Eachine makes one...
Not sure what electronics the 10428B comes with, but WLtoys is usually combined
I'd really like to put crossfire in so be great separate
Suprised you didn’t mention that its almost exactly the same as the vaterra twin hammers that came out like nearly 10 years ago but just a cheaper version
As far as I know Eachine is a Banggood brand it was posted in their forums a couple of years ago by a Banggood Admin
Quite possibly, I've yet to see an Eachine RC Car that is there own product.
My 04 arrived quickly. Your review helped. I have the brushless one. Tge shocks are one pice plastic. I did get lil shocks and metal rod replacements. Will like to buy the wltoys light kit for it. Im trying to find if it has a standard size servo. I have a flysky setup and goolrc brushless system for it.
Exact rebrand of the Feiyue FY03H I also have. Good rock racer 👍
Yes, nothing different other than the name and colour
Im not even subscribed but I got this as a recommended video but I am glad I got it
Cheers dude. Hope you stick around 👍
Great video tomley can you review some cheap drift and touring rc cars
Yes, I'll maybe get some once the weather gets better.
Holy moly! its identical copy! except i didnt get the wheel spacers XD with the FY03. !!
When are we gonna see a "Tomley RC Desert Truck" :D change the color or ad a single part and you got your own brand!
haha...it has crossed my mind 😎
And then sell it for $700 less ! Because that's how much it was overpriced in the first place
Mine keeps on cutting out do any of you know a fix?
I used axle exenders like that on my FY03. It does help with rollovers although there's only so much you can do with that design, it's not a touring car!
In theory, using them will put more strain on the bearings but who cares? Bearings are cheap and in any case, an RC car is very light compared to the loads those bearings are designed to take. I haven't noticed any premature wear since fitting them.
I'll be giving them a go soon, might do a with vs without
Cool looking rc, but unfortunately no longer on bang good, and the other is no longer in stock in bang good, might get more but could get delisted.
There are these wonderful things called instructions. I'm sure they'll explain what those things are. Lol.
😅
Awesome review 👍🏻 are these and their electrics really waterproof? Thanks 😊
No waterproof... but a bit of water is usually ok
Great vid nice crisp slow motion.
Cheers David. I know a lot of people watch on their Mobiles, but I make sure 99% of my stuff is uploaded in 4K, nothing worse than pixelated slow mos!
NC MOUNTAINS backyard RC AND MORE... KILLER. I like the back panels .. I have my fy03 Feiyue. Desert eagle.. for a bit now . Love it.. 🖒..
Yes, they are fun, if you can keep them on their wheels! haha
Thx evan that helped because it's the same as the feiyue fy08
Yes, same set up 👍
Is this thing as BAD ASS as it looks in the video? This is awesome
It’s pretty good yes! Rolls over quite a bit if you are not careful
@@TomleyRC Thank You
Them things in the bag are axle extenders n apparently they work great?? 🤷♂️
Is it possible that manufacturers are fleeing Traxxas? I know the Vaterra version had push rod suspension and a 2 speed transmission. They went after Arrma for the push rod Suspension and diff lock features Nero platform. Its my assumption that Vaterra might have been warned prior to discontinuing this model? Nevertheless this platform has intrigued me from the beginning.
Cheers
Traxxas will probably never stand a chance against a China based company, they don't conform to the usual Copyright/Trademark rules!
Those blue thing are wheel exstentions u should lit them on i havent seen anyone lut them on
Yes, I realised that after doing the video. Might try them
Oh my..this is just so similar to wltoys 12428 mate. Same chassis 😂
Yes very similar.
I like this one...the color is spot on
Bought one for my son the motor over heats and suggestion
Maybe the mesh is a little tight?
@@TomleyRC I'll check
Buy enough of anything and you can get it rebranded. I can go and buy the FTX Kanyon and have it done on my own branding if i buy enough.
Very true...
How would u rate this to the wltoys 12428? I'm leaning towards the eachine cause dual speeds.
The 12428 is pretty much the same, but I think the build quality of these is a little better
@@TomleyRC thanks, from everything I've seen these are pretty much a fy03 copy.
Any buggy of this type in american brands? Is reliable this chinese model? Got confidence buy it?
Most 'American Brands' are made in China... it's just a label ;)
Che gran bel video !!!...questo modello è il clone del Feiuye fy03 ...ma con qualche accessorio e costa un po meno !!!...ciao mitici !!!
Cool video and nice RCs
Cheers mate 😎👍
Nice RC!
Hola amigo feliz año...!!!! Excelente opción de rc crawler.... te pediría que también lo pongas a comparar con el "clásico e inventor" de este tipo de auto me refiero al ya clásico wltoys 12428, ( en lo personal yo conservo uno) una comparativa de estos 3 sería cool, saludos desde México.... 👍👍👍👍👍
This motor brushless outrunner can play in water n mud?
Probably ok in clean water.... but not mud
Hi Phil! Excellent straight-talking review as per my friend. Loved the bash footage and the fun game of tag at the end. I have been watching your other vids, but had to comment on this one to wish you a very happy and prosperous New Year! Have a great 2020! All the best from Mark :-)
Thanks Mark, I watch loads of others videos but quite often forget to comment, or have the video playing on my TV.... Hope you had a good Xmas and NY, lots more Tamiya's for 2020 I hope! My mate wants that Quattro you are building.... I keep trying to get him to buy one!
@@TomleyRC All good here thanks Phil! Yeah I watch a lot on the TV late at night when the missus has gone to bed! Hopefully some new Tamiya kits for me this year, not sure which at the moment. Yeah, the Quattro A2 is a little beauty - trying to muster the courage to start applying those darn stickers! :-)
Oh...the wonderful decals haha. Good luck!
I have the rgt 136420 1/24 crawler and the esc went out if I buy a new one is their a way to bind it to the radio
I'm sure there is a bind button on the transmitter?
I looked but could not find one I'll look again
Can you show how to waterproof it?
I did enjoy the review
Wheel extenders lol but i bet you already know that by now phil lol
Yeah 😎🤟
@@TomleyRC 👍👍
@@TomleyRC they will stop so many rollovers lol
Great review and video! Thanks for share.
No problem dude
There are no patient laws in China so to be copied is seen as an honor, and which is why you'll see the same model under many different brands with slight changes here and there
Actually in china there are business model like this is, there's one design company, they do design and probably has the factory to produce it, and then any clients/brands can order and customize the color, branding, etc..
Is It Waterproof ?
It's 'splash' proof.... but you saw how much water I went through, and it still works
Nice review!! 💯👍🏻
Thanks dude
The center of gravity seems too high. It can hardly turn in high speeds without flipping over. The distance between the wheels should have been longer, like a truggy.
Yes, it a bit of a 'roller'
True it rolls at high speed in the corners. But if the driver has got some good throttle control skills and not just operate the throttle trigger like it was an on/off switch (i.e. zero throttle/full throttle) this can easily be avoided by reducing (some) throttle in the turns, it also makes for a much much nicer run with almost zero flips. It is an aquired skill which comes with patience and practice.
After all, that is why proportional speed controllers were invented for :-)
Happy New Year bro!
And you dude
Please can someone help me.
When you turn on the rc with the wheels turned it turns them straight again ok?
Mine thinks that all the way left is straight. When I start with my wheels straight it turns it left all the way because it thinks the wheels are pointing right. When I try to turn all the way right the wheels are straight.
This is absolutely frustrating and I need help bc I don’t know how to fix it.
In case you have not already done this, try adjusting the steering trim knob on the transmitter.
#philisonfire2020 . great unboxing & 1st run video. you did the rc proud mate. keep em coming buddy!! and if you ever want to know why the one who shall remain nameless( rhymes with seven talbot) doesn’t talk to me anymore , go to my channel and search “3 reasons why kevin talbots cool” hopefully you will find it funnier than he did. happy new year
Cheers dude.... Happy New Year. *can't see that video
i will pull it up
try #philison🔥had to repost
Awesome review and bashing, dude! 😃
Yeah, Eachine has some products that they seem to make - or some company makes exclusively for them - and rebrand a lot of stuff. Their box goggles are really good, though. 😊
Happy new year!
Yes, I have some Box Googles from them, good price and good quality... just never seen a ground vehicle that is not just another make rebadged
Mine took a month to get and reverse will not work right out of the box!
Mine keeps on cutting out do any of you know a fix?
This car is water proof?
Seems to be... although don't recommend submerging it like in this video..., it will eventually damage it
Mine keeps on cutting out do you know a fix?
👍 if you haven’t got one you can get a cheap one for less than a tenner from the usual places as I’ve just realised it’s brushless 🤣
Why did WL Toys mess the 12428 up with such horrible graphics and the worst tires known to man? This EChines one looks sweet!
If you find it can you show me
Will do
the blue things ar eaxel extenders
Goes some
How come you copied kevin’s channel when you dropped the rc on the table I watch both your channel’s for my entertainment and now there’s RUclips gossip that you guys are fighting from a post kevin made?
I wouldn't worry about the 'Kev' drama, he does it for attention. I've been testing and reviewing RC's longer than him, I often drop them in slow mo to show the suspension. I must admit though, after editing and uploading this one I did notice that the fast cutting of the tie wraps mixed with the dropping it on the table was pretty similar... to much work to change it and re upload though. Anyway, cheers for watching..... "SUBSCRIBE" . haha
K
Tomley RC you have been testing RC’s longer 😂🤣😂🤣 what a petty claim to fame hahahahaha you are boring as bat shit and your monotone voice is a snooze fest you are a passive aggressive douche like a 12 year old, grow the fuck up and stop promoting the shit Chinese products you quite clearly sell, sell out.
mattysixx Kevs just reviewed this RC...go give him some shit as well 😂...or is it ok because he gets over excited all the time and is not boring like me? Asking for a friend?
mattysixx the more I watch Kevin the more he looks like an idiot
AWESOME
700reais,nem pensar...
Dude try not to copy kev
I don't copy Kev..... well, apart from we both review cheap RC's. Seen his mini Grave Digger?.... go check out a video I made months ago and then tell me I'm copying him haha
Ok
Sorry
they are pretty much ripping off feiyue.....sure feiyue doesnt make the best cheapo rc cars, they break alot. everything is the same. EVEN THE TRANSMITTER!
Yes, it certainly is...just re branded
those parts are addapters