I love that you did this in one take showing some mistakes but all in all good tutorial. Your video is the only one that I saw that disassembled the whole frickin' thing! Thanks!
Thanks sooner my channel gonna hit 1000 subscribers, you also subscribe it's free, and you can find pins in local junk yard or online or local repair shop, this thing's are cheap Don't over pay, or you can buy new full heatsink for less price in Amazon
This helps. I had to use a little saw to cut thru the white pin to get it out of the housing to get it off my heat sink. Why on earth can't they leave the parts separate in a pack of new mount pins! Instead they assemble them and then make them vulnerable to breakage before they are even used. Crazy! Thank you
thank you very much. It is not easy to get them removed (if they are already broke, then its fine to break them anyways). Installation is quick. thanks
This should be shown with a description "how not to do things". Use shims (you can make them out of soda can or plastic shot glass, but anything thin and bendable will do). White internal part has 4 sides. Two of them are completely flat without any notches and those sides are on the opposite to each other. It also has one tooth-like protrusion on it's top side that you will need to be mindful of. First rotate black external part so that it's latches align with blank flat sides on the white internal part. Insert shims perpendicular under both black latches, make sure shims got under the protrusion of the latches and then rotate the black external part so the tip of the arrow on top is aligned with protrusion (tooth) on the white plastic's internal part. Then pull on the black part and remove shims when black latches pass them. It will come off way easier and you will not break anything (even protrusion on the internal part will be OK).
Yep, heatsink clean and repaste, 3 out 4 pins failed, just hope I can retrieve spares from an unused mounting kit - as the only place I seem to be able to get them otherwise means a slow boat from China
Sunil Kumar took an old heatsink off, and 3 of those broke, and no local supplier, but another heatsink had alternative mounts - it seems the trickiest thing is getting them out undamaged
Brian (Techyescity) always strips, cleans and repastes, so thought I'd try it - as I wasn't happy with the temperatures. Got a lot more dust and fluff out than if I'd left it in place.
You can change the fan or u can buy full original second hand heat sink and fan for 150 rupees, or after market cooler if you can spend money, these are the professional solution I can give. There are so many unprofessional tricks are there but I know but I won't recommend. Let me know if you need any other information.
No, to remove only u need to twist. Follow this steps to lock. 1. Unlock the pin. 2. Keep the pin in top lock position means full end position, opposite to Grove position. 3. Then carefully press if you here click noise, then it's lock, no need to do anything, just for sefty, check it's position it's should be opposite to Grove position. If you didn't understand let me know
@@princesunil26k What is “Grove Position?” I heard all the pins “lock” upon assembly but I turned the “pin heads” in the direction of the arrow “counterclockwise” because I assumed that turning in the direction of the arrow would lock the pins. Do I need to reset the pins and start from the beginning, or can I just rotate the “pin heads” clockwise back to their original position?
@@st.patrick2207 see 4:22 in this video, I showed how to do it, that's follow it, let me know if you need any help, after pressing lock no need to do anything
It will damage mother board and processor, thermal paste is just 10 to 30 rupees, u can easily buy in good electronic store in ur city, just ask for thermal paste
@@emma_psycho bruh what's your problem, English clearly isn't his first language and he doesn't have to learn English perfectly to speak it, he talks his own language where he's from. Also he's probably more impressive than you because you don't know any other languages
I love that you did this in one take showing some mistakes but all in all good tutorial. Your video is the only one that I saw that disassembled the whole frickin' thing! Thanks!
Thanks sooner my channel gonna hit 1000 subscribers, you also subscribe it's free, and you can find pins in local junk yard or online or local repair shop, this thing's are cheap Don't over pay, or you can buy new full heatsink for less price in Amazon
Short simple video but everyone search for this, thanks man
Welcome, don't forget to subscribe I bring new videos
This helps. I had to use a little saw to cut thru the white pin to get it out of the housing to get it off my heat sink. Why on earth can't they leave the parts separate in a pack of new mount pins! Instead they assemble them and then make them vulnerable to breakage before they are even used. Crazy! Thank you
Well come
Amazing man you make it alot easier than the other tutorials! From philipines
Subscribe
thank you very much. It is not easy to get them removed (if they are already broke, then its fine to break them anyways). Installation is quick. thanks
No problem
This should be shown with a description "how not to do things".
Use shims (you can make them out of soda can or plastic shot glass, but anything thin and bendable will do).
White internal part has 4 sides. Two of them are completely flat without any notches and those sides are on the opposite to each other. It also has one tooth-like protrusion on it's top side that you will need to be mindful of.
First rotate black external part so that it's latches align with blank flat sides on the white internal part. Insert shims perpendicular under both black latches, make sure shims got under the protrusion of the latches and then rotate the black external part so the tip of the arrow on top is aligned with protrusion (tooth) on the white plastic's internal part. Then pull on the black part and remove shims when black latches pass them. It will come off way easier and you will not break anything (even protrusion on the internal part will be OK).
😇
You must be the only person on earth who can do it without breaking them.
idk why when i need something to learn exactly i want, i will facing an Indian people...tnx bro
👍
like dis and like dis! juuuust like dis. I liked dis! Seriously, thanks, it helped.
Welcome
🤣🤣🤣🤣🤣🤣🤣🤣
😂😂😂😂😂😂😂
🤣🤣🤣🤣🤣🤣🤣
😜😜😜🤣🤣🤣🤣
Your video really helped me, thank you! Gotta say it's hard not to break those locks though he he.
Well come subscribe
I really enjoyed watching this video was helpful and fun at the same time xD.👌🏻😆
Subscribe
Thank u so much...it was very helpfull for me
Well come subscribe
Hello, can i use 775 mounting pin for 1150?? Thanks
Yes, check hight of other pins once if it same u can use, locking mechanism is same to same
@@princesunil26k thank you brother
@@Speedst3r0most well come
1:20 😂
Satisfying 😂🤣
😄
Thank you for your help
Well come🙏
Nice it helped me alot😁😀😀
Thx bro..done🎉🎉🎉
Welcome
Needed this, great to see.
It's easy to buy new one or second hand it not much comes with in 100 rupees equal to 1.5 dollar something.
Anyway thanks subscribe my channel.
Bro thanks u saved my cooler🙂
Me no I did nothing, did you fixed it.
Sunil Kumar but u helped me
Yep, heatsink clean and repaste, 3 out 4 pins failed, just hope I can retrieve spares from an unused mounting kit - as the only place I seem to be able to get them otherwise means a slow boat from China
Matthew Day I didn't understand what you telling
Sunil Kumar took an old heatsink off, and 3 of those broke, and no local supplier, but another heatsink had alternative mounts - it seems the trickiest thing is getting them out undamaged
Ha ha ha why you remove if it's not damaged, if you want pins you can take from old computer
Brian (Techyescity) always strips, cleans and repastes, so thought I'd try it - as I wasn't happy with the temperatures. Got a lot more dust and fluff out than if I'd left it in place.
Ohh, but this not the way you clean, subscribe my channel I will make a video about it ok 👍
Wonderful bro. 👌👌👍👍
Subscribe
Nice video bro.thanks
Thank you
Well come
Excellent
Thank you
Can I use other objects if in case I can't find new pins? Such as screws with bolt?
Axle Benz no, but full set new one cost 100 rupees ( heat sink and fan and pins, if you want to buy only pins 10 rupees each.
Thank you for your fast reply. I am now buying the complete set of heatsink :)
Axle Benz r u from India
I am from the Philippines :)
Axle Benz ok visit your local pc service center or check in Amazon
That'ok.... You telling about stands....
But what to if the problem is in fan winding.....
Please tell that type technics.....
You can change the fan or u can buy full original second hand heat sink and fan for 150 rupees, or after market cooler if you can spend money, these are the professional solution I can give.
There are so many unprofessional tricks are there but I know but I won't recommend.
Let me know if you need any other information.
Subscribe if you want it's free.
thanks!
Well come
Thank man for helping
subscribe
2:50
You're so funny.
😊thanks subscribe
@@princesunil26k Why? What's your channel about?
@@alexvidakovic well I'm just a normal person do silly things that's all it's about nothing much.
What are these for? Do I need to twist and lock into place after pushing the pins back into the motherboard?
No, to remove only u need to twist.
Follow this steps to lock.
1. Unlock the pin.
2. Keep the pin in top lock position means full end position, opposite to Grove position.
3. Then carefully press if you here click noise, then it's lock, no need to do anything, just for sefty, check it's position it's should be opposite to Grove position.
If you didn't understand let me know
@@princesunil26k What is “Grove Position?”
I heard all the pins “lock” upon assembly but I turned the “pin heads” in the direction of the arrow “counterclockwise” because I assumed that turning in the direction of the arrow would lock the pins. Do I need to reset the pins and start from the beginning, or can I just rotate the “pin heads” clockwise back to their original position?
@@st.patrick2207 if you have what's app make a voice call I tell you
+91 9066597263
@@princesunil26k Thank you, but I don’t have what’s app.
@@st.patrick2207 see 4:22 in this video, I showed how to do it, that's follow it, let me know if you need any help, after pressing lock no need to do anything
Can you use screws instant of reparing
Nut and bolt
Thanks man
Welcome
Sar kya ham ismein Bolt Laga sakte hain
Yes but careful
@@princesunil26k thank you sir g
Repair o replace (for a new one??)
Repair if want to replace then buy fancy cooler
Anania, English is not our first language. What the videomaker wanted to say, "How to repair the fan by replacing the locks." Correct, SunilJi?
Video title is wrong. This is a replace, not a fix.
🤔 I don't know the difference, I don't know English much
just twist it off
Ok Kumar thanks a lot
Most well come don't forget to subscribe
What will happen if we do not put thermal paste on the fan??
It will damage mother board and processor, thermal paste is just 10 to 30 rupees, u can easily buy in good electronic store in ur city, just ask for thermal paste
Subscribe
@@princesunil26k ok thanks
Thanks! This did help me a lot. :D
😄
Reply me where I can buy new pin.
Where are you from, tell me your location I tell where can you buy near by you
@@princesunil26k I am from Pune so can I get pin.
@@princesunil26k Maharashtra, Pune.I want only pin so pls help me.
How to buy
Better buy new cpu color it's price is less now days
1:20 very carefully
😆😆😆😆
@@princesunil26k :-)
1:20 careful bro
Dayum your gonna break the fan before you fix pins 😅😂🤣💦
But thank you 👍🏼
@@BirdFromYakiVegas well come subscribe
Hello, What if I use the fan with some broken pins will it work ?
9066597263 send me picture
it will work in socket 1151?
Yes
I want only one pin because it's broke but where I can buy.
Comuter repair shop
@@princesunil26k They are telling to buy whole Fan. But I don't want to buy fan.
@@factsartanddrawing1416 maybe it's not available near you, if you buy new fan it will cost you 250 rupess something
mins plastic attached to stock intel
Use glue
Really u don't know how to open the notch
I know better anyone 😅
@@princesunil26k Wow that english.... It's awful your english is awful!!!
@@emma_psycho bruh what's your problem, English clearly isn't his first language and he doesn't have to learn English perfectly to speak it, he talks his own language where he's from. Also he's probably more impressive than you because you don't know any other languages
S he don't know.
no way just to buy the mounting pin no ?
Yes
This is not a fix. This is a replace.
Yes do you want to fix I can help
hahaha
🤣🤣😂🥵
?????????????????
आप अंग्रेज हो क्या, क्या आपको हिंदी नही आता
Only kannada and english
When you see brown hands, click another video.
Why
I explained very nicely
@@princesunil26k dont Worry
Its a racist
Piece of shit racist, salty that he lacks any skill sets while brown hands are hired into higher paying jobs while he scrubs toilets in disdain.
When i see a person like you, it makes me want to kick their face