I just wanted to say, thank you for an amazing event. I'm sorry I missed it. Firstly, I'm a proud owner of the GDX18v-210C and it's replaced a much older combi impact driver. I love this to bits and it is now making life so much easier, I have this in conjunction with the GSB18v-150C, again replacing a far older cordless drill, These two really make such a difference, like night and day. I've just become a proud owner of your new 2nd fix 16g nail gun and I can't thank you enough for releasing this. I've waited some time for this and luckily this happened at the right time as my 2 gas guns were driving me up the wall, so, this has replaced 2 guns and I'm getting more and more comfortable with it. I fully support the request and add my name to the pot regarding releasing a first fix gun, The sooner you do, the sooner my hands will be on one and both guns can go in an xl-boxx. Thank you for making my life as a joiner and cabinet maker easier, more enjoyable and more comfortable. Bosch Professional has always been part of my life since I started all those years ago. Keep up the amazing work. If there's going to be a cordless router coming out, that's one tool I want to review without any question.
really enjoyed this, good to have an in depth presentation of all the range and the features, makes buying decisions easier. Would love to see the brushless jigsaws in action showing the features at work.
Thank you I had a ryobi combi drill after trying to research the thing I had in discovered my ryobi drill did not have a 2 speed control or a screw mode so it seems what I thought the best conclusion was as replacement bosch hammer drill down you think I will be happy with it though don't really need the hammer function? Ideas please thank you
Hi you guys! Again what an amount of information, detailed explanation of Functions, outlook on future Machines and! some nice an excellent words about competitors system without! discrediting it! I miss this so much in german Bosch Videos… What a job that you do!
Hi there, I watch all of the videos live! However today I purchased a second GDX18v-1800c, I believe it’s the GDX-200c in the U.K. The issue I’m having is the bits are very difficult to insert and also get stuck in the collet. I’ve asked around in the Bosch community and it’s very common on the GDX, people either have to continuously lubricate the Collett or have it warranted out. Any experience or advice for the problem?
This is not a problem we have experienced here in the UK, if your experiencing this or similar it's worth inspecting the accessory to eliminate if it is an issue with the tool holder or not. Which accessory are you using?
Yes Hi! I would add I've had the GDX 18v-1800C for about 3 years plus and I've had this same issue pretty much the entire time. The accessories I use typically are Bosch but, any others the collet treats them all the same. Lubrication helps somewhat, but a switch in reverse, while pulling trigger and pulling the collet out, will disengage the bit. Wish this wasnt an issue. I still have and use the first generation impacted driver(IDH182) and it took about 6 times of warranty work before I finally have one that doesn't give me trouble at the collet. This has been my only issue with these hybrid tools
Haha, sorry i had to laugh when you were showing off the midrange impact wrench with ABR. The switch only works in reverse. You had it in forward... I had the same reaction when i first used mine!!😅😅
Other questions. Is Bosch developing a BiTurbo Brushless Metal Cutting Circular Saw, a brushless 18v Router, a Rebar Cutter, a Threaded Rod Cutter, a Cable Cutter, Cable Stripper, a 14" BiTurbo Brushless Abrasive Chop Saw, a Brushless Pipe Threader, a BiTurbo Brushless 1" Impact Wrench 2200Nm, a Right Angle Drill, a 3/8" & 1/4" 18v brushless ratchet, a Cable & Fencing Stapler, a BiTurbo Brushless 16" Chainsaw?
Ok, Took some time to check all these and remember this information is only as accurate as of the time I write this: 18V Brushless Router is on the way but still in development, We have a couple of 18V pip tools coming but it's too early to share information on that just yet., 18V Brushless ratchet is also in development. Not seen a 1" Wrench yet but we are looking at a more powerful 3/4" BITURBO GDS coming. We might see a return of the Professional Garden Range to the UK and with that might come a cordless Chainsaw. When we find out more we will share any new product info on the social channels.
@@BoschProfessionalUK Thank you kindly for your response. I will be anticipating when you release new information. I love my BiTurbo Brushless Bosch Tools. I wish all your tools were BiTurbo Brushless. So much power in these tools✌👏🙏
Ps I think the freak was the nickname given to the one in your demo that we'll it good to research as I could be wrong but that one that has the dual tip I think was referred to as you called that one they hybrid of course before you give advice since I am definitely not an expert you want to research that be forever development of any asnswers
Hi Team, thanks for a good one. The GDX is nicknamed the freak in Australia. I can't see it going high torque as the 1/4" bits couldn't handle it. There are a number of higher torque impact wrenches in the range that will fill that gap.
I just wanted to say, thank you for an amazing event. I'm sorry I missed it. Firstly, I'm a proud owner of the GDX18v-210C and it's replaced a much older combi impact driver. I love this to bits and it is now making life so much easier, I have this in conjunction with the GSB18v-150C, again replacing a far older cordless drill, These two really make such a difference, like night and day. I've just become a proud owner of your new 2nd fix 16g nail gun and I can't thank you enough for releasing this. I've waited some time for this and luckily this happened at the right time as my 2 gas guns were driving me up the wall, so, this has replaced 2 guns and I'm getting more and more comfortable with it. I fully support the request and add my name to the pot regarding releasing a first fix gun, The sooner you do, the sooner my hands will be on one and both guns can go in an xl-boxx. Thank you for making my life as a joiner and cabinet maker easier, more enjoyable and more comfortable. Bosch Professional has always been part of my life since I started all those years ago. Keep up the amazing work. If there's going to be a cordless router coming out, that's one tool I want to review without any question.
Had the GDX 18V-210C for a few months now, fantastic little bit of kit. Even whips the wheels off the van when I had a flat. Very pleased.
That mid-torque is gonna be awesome @ 58:43 going to be amazingly useful.
really enjoyed this, good to have an in depth presentation of all the range and the features, makes buying decisions easier. Would love to see the brushless jigsaws in action showing the features at work.
Hopefully you caught our most recent Live Stream ( Woodworking Pt1) where we about and show off 2 of the 4 new Brushless jigsaws coming.
Loving the GDX 210C … had it 2 years now, use it hard from cars to construction. Takes all the abuse and then some. 👍🏼👌
GDS 18v 300, The ABR only works when you loosen a bolt or screw, you hade the tool set on forward.
Yeah. The joys of Live. Obviously worked out my mistake after we finished 😅
Thank you I had a ryobi combi drill after trying to research the thing I had in discovered my ryobi drill did not have a 2 speed control or a screw mode so it seems what I thought the best conclusion was as replacement bosch hammer drill down you think I will be happy with it though don't really need the hammer function? Ideas please thank you
Great video. Very helpful on my choice of impact👍
Is there a new 220 version of the freak?
Hi you guys!
Again what an amount of information, detailed explanation of Functions, outlook on future Machines and! some nice an excellent words about competitors system without! discrediting it!
I miss this so much in german Bosch Videos…
What a job that you do!
Had the GDX FOR A WHILE, LOVE IT & the dual head is great 🎉
Glad you're enjoying it!
Hi there, I watch all of the videos live! However today I purchased a second GDX18v-1800c, I believe it’s the GDX-200c in the U.K. The issue I’m having is the bits are very difficult to insert and also get stuck in the collet. I’ve asked around in the Bosch community and it’s very common on the GDX, people either have to continuously lubricate the Collett or have it warranted out. Any experience or advice for the problem?
This is not a problem we have experienced here in the UK, if your experiencing this or similar it's worth inspecting the accessory to eliminate if it is an issue with the tool holder or not. Which accessory are you using?
Yes Hi! I would add I've had the GDX 18v-1800C for about 3 years plus and I've had this same issue pretty much the entire time. The accessories I use typically are Bosch but, any others the collet treats them all the same. Lubrication helps somewhat, but a switch in reverse, while pulling trigger and pulling the collet out, will disengage the bit.
Wish this wasnt an issue. I still have and use the first generation impacted driver(IDH182) and it took about 6 times of warranty work before I finally have one that doesn't give me trouble at the collet. This has been my only issue with these hybrid tools
Haha, sorry i had to laugh when you were showing off the midrange impact wrench with ABR. The switch only works in reverse. You had it in forward... I had the same reaction when i first used mine!!😅😅
In America Bosch gave the gdx version the freak nickname
All i want to know is why prices are so stupid high ?
Other questions. Is Bosch developing a BiTurbo Brushless Metal Cutting Circular Saw, a brushless 18v Router, a Rebar Cutter, a Threaded Rod Cutter, a Cable Cutter, Cable Stripper, a 14" BiTurbo Brushless Abrasive Chop Saw, a Brushless Pipe Threader, a BiTurbo Brushless 1" Impact Wrench 2200Nm, a Right Angle Drill, a 3/8" & 1/4" 18v brushless ratchet, a Cable & Fencing Stapler, a BiTurbo Brushless 16" Chainsaw?
Ok, Took some time to check all these and remember this information is only as accurate as of the time I write this: 18V Brushless Router is on the way but still in development, We have a couple of 18V pip tools coming but it's too early to share information on that just yet., 18V Brushless ratchet is also in development. Not seen a 1" Wrench yet but we are looking at a more powerful 3/4" BITURBO GDS coming. We might see a return of the Professional Garden Range to the UK and with that might come a cordless Chainsaw. When we find out more we will share any new product info on the social channels.
@@BoschProfessionalUK Thank you kindly for your response. I will be anticipating when you release new information. I love my BiTurbo Brushless Bosch Tools. I wish all your tools were BiTurbo Brushless. So much power in these tools✌👏🙏
Ps I think the freak was the nickname given to the one in your demo that we'll it good to research as I could be wrong but that one that has the dual tip I think was referred to as you called that one they hybrid of course before you give advice since I am definitely not an expert you want to research that be forever development of any asnswers
Hi Team, thanks for a good one. The GDX is nicknamed the freak in Australia. I can't see it going high torque as the 1/4" bits couldn't handle it. There are a number of higher torque impact wrenches in the range that will fill that gap.
Cant wait until they make a new stronger freak
GDX 18v -200👍👍👍👍👍👍🔥🔥🔥🔥🔥💯💯💯💯💯💪💪💪💪💪✌️✌️✌️✌️✌️