Considering how well this held up, I’m curious if they plan to release any other EDC gear. @ozarktrails , @walmart if you do, send it to me. I’d gladly test it.
How ever Swiss Tech just released a line that is amazing. Ceramic caged bearing, option of Micarta or G10 scales and they did a multitool that’s similar to the Wave +
I found a lot of ball detent bits that fit the Multiforce in my father's and grandfather's old tool boxes. This includes an 8 inch slotted screw driver attachment, a marlin spike, a 5 inch long nail puller attachment, and a quarter inch socket adapter. Attachments from an old 60s hand drill fit as well.
I recently obtained a multiforce multi tool and I'm impressed. I own many Swiss knives and another cheap multi tool and I've quit carrying my other multi tool now
I just purchased one of these tools from Walmart. Two things that I noticed, one is opening and closing the handles feels very gritty. I added a little bit of oil and even tried loosening the screws a little bit with no success of smoothness. The second thing I noticed is the needle nose pliers do not completely close together. If I hold them up to the light I can see light shining through between the jaws. Just wondering if you, or anyone else has experienced these issues? Thank you for the review.
I have 25 year old Chinese multi tool with the best can/ bottle open ever. It's twice as thick as the blade, and comes to a chisel ground spear point. The opener is sharper than the blade, and punctures steal cans with ease. It incorperates a bottle cap lifter and a wire stripper. The Multitool also included a thick, combination, chisel ground pry tool/ file/ serated blade.
Hell I'm considering picking up some wave plus plier heads and throwing them on.. that's pm the only thing the wave has over the mf. From the research I did.. the wave is actually made of weaker steel. Maybe their qc is a little better, but for 40 bucks I'm a very happy camper. I'm gonna mod mine soon. Swap the file for a t shank adapter (like from the surge) swap the saw for a scalpel/xacto blade adapter. Getting rid of the bit driver and adding more tools on that side. An awl, a mag lens, some others I haven't thought of yet.. I'll just make a 1/4" adapter for the flathead/pry tool.
I really like it. Mine looks like it was re-worked by the factory and does not have issues on open and close, although a tight snap. My diamond file looks like one side got sanded down to fit better. any way I can tell if the diamond file is still good?
This tool will NOT stand up to more that the lightest torque on a nut without breaking the plier stops. It's the only / biggest design flaw on this tool. I make a new tool with the leftover parts
@@bereadyeveryday6764 I use mine at work as an ironworker and put it too the test....only thing I've broken on it is the pathetic double sided hex bit it came with....
What's your discord? I'm a union ironworker and am using the multiforce and think it's an awesome multitool and wanna see more mods and plan on making some mods of my own. I've ordered a new Dremel and am currently working on making a t-shank adapter for my multiforce.
Considering how well this held up, I’m curious if they plan to release any other EDC gear. @ozarktrails , @walmart if you do, send it to me. I’d gladly test it.
They did do an axis lock knife at Christmas.
How ever Swiss Tech just released a line that is amazing. Ceramic caged bearing, option of Micarta or G10 scales and they did a multitool that’s similar to the Wave +
I found a lot of ball detent bits that fit the Multiforce in my father's and grandfather's old tool boxes. This includes an 8 inch slotted screw driver attachment, a marlin spike, a 5 inch long nail puller attachment, and a quarter inch socket adapter. Attachments from an old 60s hand drill fit as well.
That’s bad ass. You have a nice tool kit there. Great job 👏
I recently obtained a multiforce multi tool and I'm impressed. I own many Swiss knives and another cheap multi tool and I've quit carrying my other multi tool now
Thank you you just made my decision. Also showed me how to fix the creative and I’m pretty sure I know how to fix it. Thank you.
Seriously...for $38 versus a Leatherman for $150...it seems like a no Brainer. Thanks so much!!!
You’re welcome ☺️
My 1st thought was to take it apart rearrange the order of the tools. I like that it has a pocket clip!
The pocket clip is a great added feature. I was kind of surprised by this tool over all.
That closing part doesn't happen to mine
I just purchased one of these tools from Walmart. Two things that I noticed, one is opening and closing the handles feels very gritty. I added a little bit of oil and even tried loosening the screws a little bit with no success of smoothness. The second thing I noticed is the needle nose pliers do not completely close together. If I hold them up to the light I can see light shining through between the jaws.
Just wondering if you, or anyone else has experienced these issues? Thank you for the review.
Quality control issues I guess
Mine does not have this gap.
As far as the pliers being stiff to open....I like that so it's not an issue for me
Lot's of pliers have a gap or meet at a angle to accommodate holding something with the pliers it is not tweezers
Very good honest review…. I will most likely buy one, thank you
I can’t figure out why manufacturers are still putting bottle openers on tools and gadgets, I couldn’t tell you the last time I had to use one.
I used one yesterday. Multi functional. Not just for bottles. I popped a lid off my can of tung oil.
Lots of beer still requires a bottle opener
I have 25 year old Chinese multi tool with the best can/ bottle open ever. It's twice as thick as the blade, and comes to a chisel ground spear point. The opener is sharper than the blade, and punctures steal cans with ease. It incorperates a bottle cap lifter and a wire stripper. The Multitool also included a thick, combination, chisel ground pry tool/ file/ serated blade.
good shit bro
Appreciate it sir!
I'm just here for your algorithm
The algorithm is an unforgiving wench. Lol 😂
Hell I'm considering picking up some wave plus plier heads and throwing them on.. that's pm the only thing the wave has over the mf. From the research I did.. the wave is actually made of weaker steel. Maybe their qc is a little better, but for 40 bucks I'm a very happy camper. I'm gonna mod mine soon. Swap the file for a t shank adapter (like from the surge) swap the saw for a scalpel/xacto blade adapter. Getting rid of the bit driver and adding more tools on that side. An awl, a mag lens, some others I haven't thought of yet.. I'll just make a 1/4" adapter for the flathead/pry tool.
When you put the driver screwdriver back make sure it's straight and then it will close all the time
That wasnt what mine was catching on.
I really like it. Mine looks like it was re-worked by the factory and does not have issues on open and close, although a tight snap. My diamond file looks like one side got sanded down to fit better. any way I can tell if the diamond file is still good?
I just bent mine a bit.. problem solved.😊
I figured out you can squeeze close to the top and it will close easier
Awesome. I modified mine a little and now it closes every time.
Video starts at 6:55
Yeah. The time stamp is in the description if someone wants to skip the viewer participation.
THE CAN OPENER IS AWSOME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I’ve used it since. Pretty good
What steel is the ozark made of? I can't find the information anywhere.
Most likely it is AUS-8.
Is it still holding up today?
Yup. No issues with it. Use has actually loosened it up a little.
Cool channel man
My Multiforce scissors slip. Other than that, I'm happy.
Mine haven’t slipped yet. 🤔
Defiantly wipe the screen before your nose!
Hahahah. Right.
This tool will NOT stand up to more that the lightest torque on a nut without breaking the plier stops. It's the only / biggest design flaw on this tool. I make a new tool with the leftover parts
I haven’t broken these as of yet and I have put some torque on them.
It will
@@bereadyeveryday6764 I use mine at work as an ironworker and put it too the test....only thing I've broken on it is the pathetic double sided hex bit it came with....
Great video. The intro part is too long and loud.
Good video tho
C00l😀😀😀
What's your discord? I'm a union ironworker and am using the multiforce and think it's an awesome multitool and wanna see more mods and plan on making some mods of my own.
I've ordered a new Dremel and am currently working on making a t-shank adapter for my multiforce.
It in the video description
@@AGPfacecast found it but it's invalid
@@ironheadcj5 try this one discord.gg/EhZ4jbSJ
@@AGPfacecast thanks! That one worked