OMG.....YOU ARE PUSHING THE ENVELOPE... AND MAKING IT FUN INSTEAD OF SO SERIOUS LIKE ALL OTHER DIYers that just concentrate on specs game. BRINGING BACK IMAGINATION. Please keep making fucking sick boards. SUBSCRIBED. Hello from Melbourne, Australia.
i don't know why i got your channel in my recommended but i am glad i did. i don't skate in any way, but i really enjoy ppl building stuffs with motors.
Super cool! Thank you for the technical captions. 480kv is interesting. 220kv is the highest I’ve ever used with out runners. White is a brave Esk8 color! Keep it clean buddy 👍
Happy New Year bro. That new f1 is looks good on the streets. Really wanna see how much power those motors have. Hope you do a video measuring speed on that thing.
그렇게 봐주셔서 감사합니다 :) 170Kv, 480Kv는 모터가 볼트당 일분동안 도는 회전수(RPM)를 의미해요. 단순히 모터의 크기와 출력을 배제하고 회전수로만본다면 Kv가 낮으면 토크가 강해지고(디젤엔진) Kv가 높으면 토크보다는 최대 회전수가 많아서 최고속도를 내는것이 유리합니다.
Thank you for waiting for me for a year :) The covid19 situation got worse again, so I made this film a bit difficult to make time. Anyway, Happy new year~
I've never even used a limited RPM of a motor. It is beyond my control to reach 100 kilometers per hour. But I don't think it's going to be a problem because the ESC's instantaneous output is 400A(single). However, I still think the battery(40c) hasn't enough discharge. Thank you for watching :) and happy new year~
@@KAMiJUINs That's exactly what I mean the output voltage is never the full potential voltage it could output because there is a hardware limit on the vesc that if you get close to it or beyond it, it fries the ESC, It comes to around 190kv is the maximum usable kv at 12s, over that it doesn't matter, you won't be able to spin the wheels any faster because of that hardware limit of the vesc, and because of the high kv, the motor needs that much current to even get mooving
@@richardwest9520 Thank you for your explanation. It helped me to understand it. First of all, It will be tested with a battery with a higher discharge rate (over 60-80c).
@@richardwest9520 The motor only has 3 pole pairs so at 12s and 480kv, its max erpm is only 75k. Vesc 6 has an erpm limit of 150k so that's not an issue. Since the board is geared for around 100mph, the maximum erpm the motors will run at when moving at 20mph is around 15000 to 20000 erpm. This is a very inefficient setup but its not gonna fry the esc.
If it calculates the spec, it's close to 100Km/h. But I think, when it gets to that speed, it could have problems with the belts or wheels due to the frictional heat.
Happy new year! Amazing job on the board, it looks so badass. Since the motors are so unreasonably high in kV, do you plan to use the original black motors for it? You could also change the gear ratio and eventually use a gear on gear drive rather than belts. You can also look into increasing the deck width or giving it a concave with something like this www.thingiverse.com/thing:3145193
@@KAMiJUINs the one from the link is not my build, I was just looking for inspiration to do something similar to my deck, found that and wanted to share it with you. Thought it would help you
Its a work of art. But the sole purpose of aero on any car is push the car down to prevent it from sliding. At the expense of speed. Which you dont want on a skate. But your buikding akills are the Best ivw seen
![Chino Pacas - Modo Capone (with Drake & Fuerza Regida) [Video Oficial]](http://i.ytimg.com/vi/zjv8TQ0gBkg/mqdefault.jpg)
Happy new year to my subscribers! I hope everything is good for you this year :)
구독자여러분 새해 복많이 받으세요! 올한해 모든일이 잘되시길 바랍니다~
How can i get it? I want buy this electric skate board.
@@soknhansoknhan9508 DIY
pro tip: watch series on Flixzone. Me and my gf have been using it for watching lots of of movies lately.
What’s the prince on something like this ?
Looks like you're standing on an F1 car. Amazing.
Thank you for watching :) and happy new year~
This ATC F1 board looks awesome! Also I'm glad you're showing information about what battery it needs and how it performs as well as the torque curve
no problem, mate :) Happy new year~~~
Incredibly unique ride! love that batteries on the side like that. It looks like a Formula 1 race car.
Thank you for watching and happy new year :)
By far the coolest thing I’ll probably see this year.
Thank you for watching :) and happy new year~
Wow, that's a work of art too beautiful to ride! Awesome dude!
👍😎👍
Thank you for watching :)
A work of art, love it, happy new year :)
Thank you so much :) and happy new year too~
Dude the rear and front leap are cooooooool!!
Thank you for watching :) It was a hard work HaHa~
OMG.....YOU ARE PUSHING THE ENVELOPE... AND MAKING IT FUN INSTEAD OF SO SERIOUS LIKE ALL OTHER DIYers that just concentrate on specs game. BRINGING BACK IMAGINATION.
Please keep making fucking sick boards. SUBSCRIBED.
Hello from Melbourne, Australia.
Thank you for saying that and watching :) Happy new year~~
Keep the vids coming, love your stuff, crazy looking board. You are very talented!!!
Thank you so much for saying :) and happy new year~~
Happy new year!!!
Didn’t you consider to do it in Ferrari red? It’s kind of formula one like looking that board 👍🏼
I like Ferrari Red too, but I think I'm going to be too conspicuous :) Thank you and Happy new year~
i don't know why i got your channel in my recommended but i am glad i did. i don't skate in any way, but i really enjoy ppl building stuffs with motors.
Thank you so~~~ much for coming my channel :)
보는것도 이뻣는데 타시는거 보니까 더 이쁘네요! 얼른 날씨 풀려서 맘껏 타시는 모습이 보고 싶어집니다.. 건강 조심하시구 새해복 많이 받으세요~~!
항상감사합니다 :) 예성님도 새해복 많이 받으세요~~
Awesome build man
Thank you so much for a long time :) and happy new year
Happy new year! Glad we finally got to see that board in action! Can't wait to see what you build next :)
Thank you for watching and Happy new year :)
Happy new year my friend !
And this is so awesome build jesus...Its best looking eboard out. You should have your own brand !
Hey, my friend :) Happy new year too and I wish you all the best in 2021~~
If I set mine up, it'll be ruined.
Happy To See You Projects...
Thank you for watching :)
@@KAMiJUINs BIG Love Bro..
Love that board Kami! Nice job
Thank you so much :)
This looks brilliant, well done 👍🏾😊
Thank you for watching :) and happy new year~
며칠전부터 알게되서 이번영상까지 보게됐네요
진짜 멋있네요 레이싱카 같은 보드라니...멋지네요
happy new years to you to. have a nice ride
Thank you so much :) happy new year too~
Nice work! This is so well done!
Thank you for watching :)
Feliz año nuevo para mí amigo !!!! Excelente calidad de video !!! 🛹🐶♥️👍
Le agradezco mucho y le deseo un feliz año nuevo :)
It looks amazing
Thank you for watching ~ :)
Super cool! Thank you for the technical captions. 480kv is interesting. 220kv is the highest I’ve ever used with out runners.
White is a brave Esk8 color! Keep it clean buddy 👍
Thank you so much and happy new year~ :)
람보르기니 스포츠카를 보는것 같군요~ 정말 경이롭습니다 항상 즐겁게 영상 감상하고 갑니다~ 새해에는 더 멋진 영상 기대하겠습니다~ 이정도 기술이면 까미가 탈수 있는 RC카도 만들 수 있겠어요~^^
시청감사합니다 :) 사실 까미 모터소리 엄청 무서워해요 ㅋㅋㅋ 새해복많이 받으시고요~
Man this thing is WIDE jesus!! xD looks amazing!!
Thank you for watching :)
Happy new years!!! You have very nice board & nice suit bro =]
Thank you for watching :) and happy new year too~~
Happy New Year bro.
That new f1 is looks good on the streets.
Really wanna see how much power those motors have.
Hope you do a video measuring speed on that thing.
I don't want to die bro :) Thank you for watching and happy new year~
Amazing DIY board, only you can do something like that. Happy New Year !
Thank you for a long time :) And happy new year too~
Dear lord, what a build.
It was just one meaningless and difficult challenge HaHa :) Thank you for watching~
I feel like Mario should be sitting in it and driving that 😂 good work!
HAHA :) Thank you for watching~ and happy new year!
Damn dude, that thing looks like an F1 car 🏎 !! Sick man🤙🏼
Thank you so much and happy new year :)
@@KAMiJUINs thanks dude, same to you!
Formula 1 board 👍🏼
Thank you for watching :) Happy new year~
Awesome design :)
Thank you for saying that :) Happy new year~
@@KAMiJUINs Belated Happy New Year Wishes Sir :) Thanks for your greetings :)
Really beautiful design! Would love to see you test this board on a track this year :)
Thank you :) I wanted to go to the Go-kart track and ride it. It was difficult at this time. I'll try someday.
Anyway, Happy new year~~~
Cool Formula board !! xD
Maybe putting something like snowboard binding would help controlling board during high speed?
Well... It's gonna be easy, but I think can't move feet in dangerous situations, and it can get seriously hurt.
Oye cuanto cobras por construirme una de esas o cuanto cuesta? Està muy bonito ése trasporte👍👍👍👍
Yo no calculé este edificio exactamente, pero creo que es alrededor de 2000-2500 dólares incluyendo el texto y el costo de envío. Gracias por verme :)
already seeing some problem if you lean to hard you are definitely going to get the side batterys biting on the asphalt
Thank you for watching
It isn't that much lower as you think. and those truck's spring bushings are not soft to lean enough.
생각만으로 끝날때가 대부분인데 실행해 옮기는 모습이 너무 멋있어요. 170Kw 와 480Kw 차이는 4기통/8기통 차이 정도 일까요? ㅎㅎ 자~ 이제 보드를 닦...ㅜㅜ
그렇게 봐주셔서 감사합니다 :)
170Kv, 480Kv는 모터가 볼트당 일분동안 도는 회전수(RPM)를 의미해요. 단순히 모터의 크기와 출력을 배제하고 회전수로만본다면 Kv가 낮으면 토크가 강해지고(디젤엔진) Kv가 높으면 토크보다는 최대 회전수가 많아서 최고속도를 내는것이 유리합니다.
Happy new year 2021, let's make it a good one!
Very nice video! Looking good ARMORED up! =)
Best start 2021 with Kami JUINs
// Robin - LAZYROLLING
Hey Robin :) Happy new year too with Ralph!!!
I wish you all the best 2021~~~
i am waiting from 2020 for this!
Thank you for waiting for me for a year :) The covid19 situation got worse again, so I made this film a bit difficult to make time.
Anyway, Happy new year~
@@KAMiJUINs thank you man! Happy new year too! We will always w8 for your videos!
The trouble is the most non aero dynamic thing on a board is the rider 😂
Except for riders, it actually doesn't help at this much speed. It's just carbon decorations lol.
Ok ok I'm a BIG FAN I LIKED AND Subscribed....now are you making these and selling....I NEED ONE
Thank you for saying that :) and Happy new year~
드디어 올리셨네 이 한파에 대단하십니다^^
시간이 없어서 못찍다가 결국 그렇게 되었네요 ㅋ 시청감사합니다.
디자인 굿 만듦세 굿 열정도 굿~~~
riding slicks on the wet, you are brave my friend. little too much gimmic but kinda looks cool too. the side bits were a bit too much.
Thank you for watching :) Friend~
Do you have your own company? I want to buy one!
No I don't have~ It is just my hobby :) Thank you for watching
Wow, it’s look like castle creation motors.
Yeah it looks similar. Thank you for watching :)
Super cool
Thank you for watching :)
I want buy. I live in korae. How price?
sorry~ it is just my hobby.
This guy is genius
Thank you for saying that :) but I'm not HaHa. Happy new year~~
bonne année mon pote ✌️
Merci d'être venu compatriote :) Bonne année year
부럽습니다. ㅠㅠ 저는 주문한 앤클로저가 한달째 오질 않아서 하염없이 대기중이에요 USPS 너무 느리네요 ㅠㅠ
코로나 여파로 물류비도 상승하고 모든게 디죽박죽된것같아요. 저도 어떤부품에경우 2달정도 걸린것들이 있는것 같아요~
엔클로저가 기다린만큼 더 만족하셨으면 좋겠네요 :) 새해복 많이 받으시구요~
maybe in the next video. You can make boards for a low price😅. always success😁
Thank you for the suggestion :) and happy new year~
@@KAMiJUINs happy new year master ^^
Just wow !!!!
Just "Thank you" :) Happy new year~~~
@@KAMiJUINs right back at cha . Happy new year !
i love your dog....
Thank you so much :)
doesn't the motor get limited by the erpm limit that's on Vesc?
I've never even used a limited RPM of a motor. It is beyond my control to reach 100 kilometers per hour. But I don't think it's going to be a problem because the ESC's instantaneous output is 400A(single). However, I still think the battery(40c) hasn't enough discharge. Thank you for watching :) and happy new year~
@@KAMiJUINs That's exactly what I mean the output voltage is never the full potential voltage it could output because there is a hardware limit on the vesc that if you get close to it or beyond it, it fries the ESC, It comes to around 190kv is the maximum usable kv at 12s, over that it doesn't matter, you won't be able to spin the wheels any faster because of that hardware limit of the vesc, and because of the high kv, the motor needs that much current to even get mooving
@@richardwest9520 Thank you for your explanation. It helped me to understand it.
First of all, It will be tested with a battery with a higher discharge rate (over 60-80c).
@@richardwest9520 The motor only has 3 pole pairs so at 12s and 480kv, its max erpm is only 75k. Vesc 6 has an erpm limit of 150k so that's not an issue. Since the board is geared for around 100mph, the maximum erpm the motors will run at when moving at 20mph is around 15000 to 20000 erpm. This is a very inefficient setup but its not gonna fry the esc.
@@ryanpederson3884 didn't know about the number of pole pairs, usually it's 7 so i calculated with that, thank you for your information
Aerodynamic until the big fleshy lump jumps aboard. :)
that's right :) Thank you for watching
올해도 좋은 영상 부탁 합니다
:) 시청감사하고 새해복많이 받으셔요~~~
Gundam origin story
A bit :) Thanks and happy new year~
드디어 올라왔군요!!!
기다려주셔서 감사합니다 :) 새해복많이 받으세요~~~
판매는 안하시죠..?
전기계통 전공하셨나요? ㅎㄷㄷ 공부는 국내외 사이트만보고 하셨는지요?
전동보드타기전까지는 전기하나도몰랐어요. 필요할때마다 유튜브나 구글검색해서 공부하고있어요.
판매도하시나요? 새해 복많이받으세요
취미로만 즐기고있어요 :) 판매한다고해도 가격정하기 힘들것같아요 ㅋ 시청감사하고 새해복많이 받으세요~~
Epic 🔥
Thank you for watching :)
@@KAMiJUINsneed to place order lol
How fast is it
If it calculates the spec, it's close to 100Km/h. But I think, when it gets to that speed, it could have problems with the belts or wheels due to the frictional heat.
보드 진짜이쁘네요
감사합니다~ :)
Batteries Max amps 6s 10900mah 120c
What dose that mean? Do you mean that I can buy?
Would you sell that to me? How much?
Nice Formel 1 :)
Thank you for watching for a long time :)
so does it go over 150 mph? lol
How did you know that lol :) Thank you for watching~
역시!! Nice x 10000 👍🏻
Thank you x 10000 :) Happy new year~
I've been waiting 😍😍😍
Hey Thanks bro :) happy great new year~ I hope you are fine in London!!!
@@KAMiJUINs ayee happy new year insure am thanks you too and Kami! 💚
캬 멋지네요 ㅎ
감사합니다 준희님 :) 새해복많이 받으시구요~
흘깃보고 F1유튜븐줄 알음 ㅋㅋㅋ 효율성은 제외하더라도 역대급으로 이쁜 보드네요
그렇게봐주셔서 감사합니다 :) 새해복 많이 받으시고요~~
An F1 eskate 🤘🏼
Thank you for watching :)
His good at selecting music
Really? HaHa Thank you for coming~ :)
Happy new year! Amazing job on the board, it looks so badass. Since the motors are so unreasonably high in kV, do you plan to use the original black motors for it? You could also change the gear ratio and eventually use a gear on gear drive rather than belts. You can also look into increasing the deck width or giving it a concave with something like this www.thingiverse.com/thing:3145193
Did you build it? cool :)
There are no plans to change the motor or drive yet.
Thank you for your suggestion and Happy New Year ~~~
@@KAMiJUINs the one from the link is not my build, I was just looking for inspiration to do something similar to my deck, found that and wanted to share it with you. Thought it would help you
Its a work of art. But the sole purpose of aero on any car is push the car down to prevent it from sliding. At the expense of speed. Which you dont want on a skate. But your buikding akills are the Best ivw seen
Thank you for saying that and watching :) It was just a fun attempt from my Imagination.
F1 ?
Just the way it looks. Thank you for watching~
It's really cool video bro, but i hate noise from the wind
Thank you for your opinion~
I just want to do this with four wheel drive and 7 inch wheels
You can try :) Thank you for watching~
U need a parking spot for that 😆
Yes!!! i agree lol :)
ㅋㅋㅋㅋ이정도면 차타고다니는건데요?
I want one plz
What can i say to you... Thank you for watching :)
more
What's more?
@@KAMiJUINs i dont care just more :D u are awesome:D
Ha ha pointless seeing that there's a 5 ft wind sock is on top of it lol stupid